Please wait a minute...
材料导报  2023, Vol. 37 Issue (14): 21120136-12    https://doi.org/10.11896/cldb.21120136
  金属与金属基复合材料 |
双金属层状构件界面结合的模拟与实验研究进展
王恒星1, 秦芳诚1,*, 齐会萍2, 汪扬波1, 王于金1
1 桂林理工大学材料科学与工程学院,广西 桂林 541004
2 太原科技大学材料科学与工程学院,太原 030024
Advances in Simulation and Experimental Study on the Interface Bonding of Bimetallic Layered Components
WANG Hengxing1, QIN Fangcheng1,*, QI Huiping2, WANG Yangbo1, WANG Yujin1
1 College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, Guangxi, China
2 School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
下载:  全 文 ( PDF ) ( 33042KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 单一金属材料的使役性能在航空航天、石油化工、风电、汽车等应用领域的局限性日渐凸显,而将具有两种不同物理、化学和力学性质的金属通过某种方式结合在一起形成双金属层状构件,从而使得双金属层状构件具备任一金属组元都无法比拟的性能优势,能够满足某些构件在极端环境下服役时所要求的高强高韧性、耐磨性和耐蚀性等性能,具有广阔的应用前景。双金属组元的化学成分和结构形态均不同,双金属层状构件的不同工作面存在力学性能差异,因而界面形态与结合性能成为双金属层状构件复合成形的关键。因此,本文基于双金属层状构件复合制造技术的研究现状,从双金属层状构件的界面结合过程的数值模拟和实验研究方面进行简要阐述,着重探讨工艺参数对双金属层状构件界面结合过程的影响规律,揭示界面形态和组织演变特征以及界面结合机理,指出现有双金属层状构件界面结合行为研究的不足,并展望双金属层状构件界面结合研究重点与发展趋势。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王恒星
秦芳诚
齐会萍
汪扬波
王于金
关键词:  双金属构件  界面  工艺参数  数值模拟  结合机理    
Abstract: The limitation of single-metal material service performance in aerospace, petrochemical, wind power, automobile and other applications is increasingly prominent. Two kinds of metal materials with different physical and chemical properties are bonded to produce a bimetallic composited component. It has incomparable performance advantages of any metal component, and can meet the performance requirement including high strength and high roughness, wear resistance and corrosion resistance for some components serving in the extreme environments. The chemical compositions and structure morphologies of the bimetallic materials are different, leading to the performance difference in different surfaces of the bimetallic materials. Therefore, the interface morphology and performance of the interface between bimetallic components has become the key to produce the bimetallic composited components. In this paper, the numerical simulation and experimental study on the interface bonding of bimetallic component are reviewed based on the present situation of composited process of bimetallic layered component. The influence rules of processing parameters on the interface bonding process are emphasized. The morphologies and evolution characteristics in bonding interface as well as its bonding mechanism are clarified. Combined with the simulation and experimental results, the shortcomings of existing studies on the interface bonding behavior of bimetallic layered components are pointed out, and the research emphasis and trend are prospected.
Key words:  bimetallic component    interface    processing parameter    numerical simulation    bonding mechanism
出版日期:  2023-07-25      发布日期:  2023-07-24
ZTFLH:  TG331  
  TG142  
基金资助: 国家自然科学基金(52265045;51875383); 广西自然科学基金(2019GXNSFAA245051;2018GXNSFBA281056); 有色金属及材料加工新技术教育部重点实验室/广西光电材料与器件重点实验室开放基金(20AA-8)
通讯作者:  *秦芳诚,桂林理工大学副教授、硕士研究生导师。2017年于太原科技大学材料科学与工程学院获得博士学位,主要研究方向为金属材料连续与精密成形技术、精确塑性成形过程组织演变与性能控制。近年来主持和参与国家自然科学基金、广西自然科学基金和企业委托项目5项,获山西省自然科学二等奖1项,发表学术论文30余篇,其中SCI/EI收录20篇,获授权发明专利15项,主编出版学术专著1部。qinfangcheng@glut.edu.cn   
作者简介:  王恒星,2020年6月毕业于山东建筑科技大学,获得工学学士学位。现为桂林理工大学材料科学与工程学院硕士研究生,主要的研究方向为金属材料精确塑性成形技术。
引用本文:    
王恒星, 秦芳诚, 齐会萍, 汪扬波, 王于金. 双金属层状构件界面结合的模拟与实验研究进展[J]. 材料导报, 2023, 37(14): 21120136-12.
WANG Hengxing, QIN Fangcheng, QI Huiping, WANG Yangbo, WANG Yujin. Advances in Simulation and Experimental Study on the Interface Bonding of Bimetallic Layered Components. Materials Reports, 2023, 37(14): 21120136-12.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.21120136  或          http://www.mater-rep.com/CN/Y2023/V37/I14/21120136
1 Wang Z J, Zhai L, Ma M, et al. Materials Science and Engineering A, 2015, 644(9), 194.
2 Zhang X, Li X J, Hou M S, et al. Heat Treatment of Metals, 2018, 43(11), 62 (in Chinese).
张星, 李秀景, 侯明山, 等. 金属热处理, 2018, 43(11), 62.
3 Wan J. Hebei Metallurgy, 2018(10), 20 (in Chinese).
万佳. 河北冶金, 2018(10), 20.
4 Zhang T, Xu H, Li Z J, et al. Chinese Journal of Engineering, 2021, 43(1), 67 (in Chinese).
张婷, 许浩, 李仲杰, 等. 工程科学学报, 2021, 43(1), 67.
5 Ma Z X, Hu J, Li D F, et al. Chinese Journal of Rare Metals, 2003, 27(6), 799 (in Chinese).
马志新, 胡捷, 李德富, 等. 稀有金属, 2003, 27(6), 799.
6 Zhao S. Numerical simulationand experimental study of asymmetrical rolling composite process for 13Cr/Q235 stainless steel composite plate. Master’s Thesis, Yanshan University, China, 2018 (in Chinese).
赵帅. 13Cr/Q235不锈钢复合板异步轧制复合工艺数值模拟与实验研究. 硕士学位论文, 燕山大学, 2018.
7 Bao Y. The Study on the rolling process of bimetallic seamless steel tube. Master’s Thesis, Tianjin University of Technology, China, 2014 (in Chinese).
鲍岩. 双金属复合无缝钢管轧制成型过程的研究. 硕士学位论文, 天津理工大学, 2014.
8 Xie G L, Sheng H, Han J T, et al. Materials and Design, 2010, 31(6), 3062.
9 Chen L S, Zhang X L, Zheng X P, et al. Rare Metal Materials and Engineering, 2018, 47(10), 3243 (in Chinese).
陈连生, 张鑫磊, 郑小平, 等. 稀有金属材料与工程, 2018, 47(10), 3243.
10 Huang H T, Wang H. Hot Working Technology, 2019, 48(11), 57 (in Chinese).
黄海涛, 王辉. 热加工工艺, 2019, 48(11), 57.
11 Huang H G, Chen P, Ji C. Materials and Design, 2017, 118(3), 233.
12 Liu Y Z, Wang W Y, Huang Y B, et al. Journal of Materials Engineering and Performance, 2019, 28(12), 7241.
13 Ji C, Huang H G, Sun J N, et al. China Mechanical Engineering, 2019, 30(15), 1873 (in Chinese).
季策, 黄华贵, 孙静娜, 等. 中国机械工程, 2019, 30(15), 1873.
14 Shi S Q. Effect of cold rolling and annealing process on interface and properties of cast-rolling Ti/Al composite plate. Master’s Thesis, Henan University of Science and Technology, China, 2017 (in Chinese).
史士钦. 冷轧及退火工艺对铸轧钛铝复合板界面与性能的影响研究. 硕士学位论文, 河南科技大学, 2017.
15 Huang H G, Ji C, Dong Y K, et al. The Chinese Journal of Nonferrous Metals, 2016, 26(3), 623 (in Chinese).
黄华贵, 季策, 董伊康, 等. 中国有色金属学报, 2016, 26(3), 623.
16 Wang W Y, Shi S Q, Shang Z P, et al. Special Casting & Nonferrous Alloys, 2016, 36(10), 1084 (in Chinese).
王文焱, 史士钦, 尚郑平, 等. 特种铸造及有色合金, 2016, 36(10), 1084.
17 Xu J, Gao X, Jiang Z, et al. The International Journal of Advanced Manufacturing Technology, 2016, 86(1), 817.
18 Lu S L, Xiao F R, Guo Z H, et al. Applied Thermal Engineering, 2016, 93(1), 518.
19 Orozco K M, Dessi J G, Afonso C R M, et al. Journal of Manufacturing Processes, 2018, 32(3), 318.
20 Nazari J, Yousefi M, Kerahroodi M S A, et al. International Journal of Materials Lifetime, 2015, 1(1), 20.
21 Watanabe Y, Watanabe S, Matsuura K. Metallurgical and Materials Transactions A, 2004, 35(5), 1517.
22 He J A, Wang Y W, Tong M D, et al. Foundry, 1999 (4), 36 (in Chinese).
何奖爱, 王玉玮, 佟铭铎, 等. 铸造, 1999(4), 36.
23 Guo M H, Cai Y L, Sun H B, et al. Steel Pipe, 2008(1), 38 (in Chinese).
郭明海, 蔡玉丽, 孙红波, 等. 钢管, 2008(1), 38.
24 Yao S J. Special Casting & Nonferrous Alloys, 2002(2), 44 (in Chinese).
姚三九. 特种铸造及有色合金, 2002(2), 44.
25 Gao J Z. Welded Pipe and Tube, 2017, 40(7), 44 (in Chinese).
高建忠. 焊管, 2017, 40(7), 44.
26 Tian H W, Wang A Q, Xie J P, et al. Materials Reports, 2019, 33(10), 1706 (in Chinese).
田捍卫, 王爱琴, 谢敬佩, 等. 材料导报, 2019, 33(10), 1706.
27 Wang A Q, Chen Y, Tian H W, et al. Procedia Manufacturing, 2019, 37(1), 105.
28 Kang G, Li Y G, Chu Z B, et al. Forging & Stamping Technology, 2019, 44(1), 34 (in Chinese).
康庚, 李玉贵, 楚志兵, 等. 锻压技术, 2019, 44(1), 34.
29 Wang Q. Studies on properties and process optimization of stainless steel/aluminum/stainless steel laminated sheet. Master’s Thesis, Taiyuan University of Technology, China, 2011 (in Chinese).
王强. 不锈钢/铝/不锈钢复合板的性能研究与轧制工艺优化. 硕士学业论文, 太原理工大学, 2011.
30 Zhan Q, Zhang Z Y, Su N. Shanxi Metallurgy, 2016, 39(1), 14 (in Chinese).
詹琦, 张志远, 苏宁. 山西冶金, 2016, 39(1), 14.
31 ZhangJ P, Huang H G, Zhao R D, et al. Transactions of Nonferrous Metals Society of China, 2021, 31(3), 626.
32 Zhang J J. Preparation of Al/Mg/Al laminated composite fabricated by hot rolled and investigation of microstructure and mechnaical properties. Ph. D. Thesis, Taiyuan University of Technology, China, 2016 (in Chinese).
张建军. Al/Mg/Al热轧复合板的制备及其微观组织和力学性能研究. 博士学位论文, 太原理工大学, 2016.
33 Wang T X, Hu S J, Wu X B. Hot Working Technology, 2019, 48(3), 179 (in Chinese).
王天翔, 胡尚举, 武显斌. 热加工工艺, 2019, 48(3), 179.
34 Wang D Y. Rolling process and interface behavior of magnesium/aluminum explosive welding composite plate. Master’s Thesis, Taiyuan University of Technology, China, 2017 (in Chinese).
王东亚. 镁/铝爆炸复合板轧制工艺及界面行为研究. 硕士学位论文, 太原理工大学, 2017.
35 Liu W Z. Rolling deformation of magnesium/aluminum explosive welding composite plate. Master’s Thesis, Taiyuan University of Technology, China, 2016 (in Chinese).
刘文拯. 镁/铝爆炸焊接复合板的轧制变形. 硕士学位论文, 太原理工大学, 2016.
36 Qin F C, Qi H P, Li Y T, et al. Materials Reports, 2020, 34(10), 19152 (in Chinese).
秦芳诚, 齐会萍, 李永堂, 等. 材料导报, 2020, 34(10), 19152.
37 Qin F C, Qi H P, Li Y T, et al. Materials Reports, 2021, 35(9), 9049 (in Chinese).
秦芳诚, 齐会萍, 李永堂, 等. 材料导报, 2021, 35(9), 9049.
38 Hou L T, Chen W G, Liu Y B, et al. Transactions of Materials and Heat Treatment, 2014, 35(12), 20 (in Chinese).
侯林涛, 陈文革, 刘盈斌, 等. 材料热处理学报, 2014, 35(12), 20.
39 Liu J G, Han J T, Liu J, et al. Hot Working Technology, 2018, 47(12), 74 (in Chinese).
刘嘉庚, 韩静涛, 刘靖, 等. 热加工工艺, 2018, 47(12), 74.
40 Lyu Z Y. Journal of Plasticity Engineering, 2019, 26(4), 93 (in Chinese).
吕震宇. 塑性工程学报, 2019, 26(4), 93.
41 Yang Y, Li H Z, Liang X P, et al. Hunan Nonferrous Metals, 2020, 36(3), 40 (in Chinese).
杨勇, 李慧中, 梁霄鹏, 等. 湖南有色金属, 2020, 36(3), 40.
42 Wang C Y. Study on interfacial property of steel-Al bonding plate with warm rolling post treatment. Master’s Thesis, Beijing Jiaotong University, China, 2016 (in Chinese).
王晨阳. 钢/铝复合板界面力学性能温轧后处理研究. 硕士学位论文, 北京交通大学, 2016.
43 Xiao H, Qi Z C, Yu C, et al. Journal of Materials Processing Technology, 2017, 249(11), 285.
44 Asemabadi M, Sedighi M, Honarpisheh M. Materials Science & Enginee-ring A, 2012, 558(12), 144.
45 Wang Z Y, Gong X Y, Miao L, et al. Journal of Materials Science and Engineering, 2015, 33(3), 455 (in Chinese).
王泽宇, 龚潇雨, 苗龙, 等. 材料科学与工程学报, 2015, 33(3), 455.
46 Lin C M, Wang Y J, Xu W L, et al. Special Casting & Nonferrous Alloys, 2020, 40(10), 1126 (in Chinese).
林椿梅, 王于金, 徐维良, 等. 特种铸造及有色合金, 2020, 40(10), 1126.
47 Cui Z Q, Tan Y C. Metallurgy and heat treatment theory, Mechanical Industry Press, China, 2007 (in Chinese).
崔忠圻, 谭耀春. 金属学与热处理, 机械工业出版社, 2007.
48 Cai Y J, Yang C, Ren S X, et al. Hot Working Technology, 2021, 50(2), 87 (in Chinese).
蔡雨捷, 杨超, 任双星, 等. 热加工工艺, 2021, 50(2), 87.
49 Zhu Q, Pan D W, Zhang W Q, et al. Steel Rolling, 1989, 6(4), 19 (in Chinese).
朱泉, 潘大炜, 张文奇, 等. 轧钢, 1989, 6(4), 19.
50 Li M Q. Deformation and properties on steel/aluminum metal-laminate material. Master’s Thesis, Hunan University, China, 2009 (in Chinese).
李民权. 钢/铝复合板变形规律和性能的研究. 硕士学位论文, 湖南大学, 2009.
51 Burton M S. Welding Journal, 1954, 33(11), 1051.
52 Wang T, Qi Y Y, Liu J L, et al. Journal of Harbin Institute of Technology, 2020, 52(6), 42 (in Chinese).
王涛, 齐艳阳, 刘江林, 等. 哈尔滨工业大学学报, 2020, 52(6), 42.
53 Mohamed H A, Washburn J. Welding Journal, 1975, 54(9), 302.
54 Jiang L, Zheng X Q, Song J Y, et al. Heat Treatment of Metals, 2019, 44(2), 96 (in Chinese).
姜龙, 郑小平, 宋进英, 等. 金属热处理, 2019, 44(2), 96.
55 Chen Z Q, Tang W, Cao X Q, et al. Light Alloy Fabrication Technology, 2018, 46(12), 21 (in Chinese).
陈志青, 唐巍, 曹晓卿, 等. 轻合金加工技术, 2018, 46(12), 21.
56 Wang J, Lei Y, Liu X H, et al. Chinese Journal of Engineering, 2020, 42(2), 216 (in Chinese).
王珺, 雷宇, 刘新华, 等. 工程科学学报, 2020, 42(2), 216.
57 Chang D X, Wang P, Zhao Y Y, Journal of Northeastern University(Na-tural Science), 2019, 40(11), 1574 (in Chinese).
常东旭, 王平, 赵莹莹. 东北大学学报(自然科学版), 2019, 40(11), 1574.
58 Mao Z P. Study on interfacial structure evolution and bonding property of copper aluminum clad sheet produced by twin-roll casting. Master’s Thesis, Zhengzhou University, China, 2019 (in Chinese).
毛志平. 铜铝铸轧复合板界面结构演变及结合性能研究. 硕士学位论文, 郑州大学, 2019.
59 Sheng L Y, Yang F, Xia T F, et al. Composites:Part B, 2011, 42(9), 1468.
60 Chen J W, Ou Y L, Wen Y, et al. Journal of Net Shape Forming Engineering, 2019, 11(4), 134 (in Chinese).
陈嘉伟, 欧阳柳, 文宇, 等. 精密成形工程, 2019, 11(4), 134.
61 Yang S J. The research on the microstructures and mechanical properties of AZ31B/A356 composite plate fabricated by cast rolling. Master’s Thesis, Lanzhou University of Technology, China, 2019 (in Chinese).
杨世杰. 固-液铸轧AZ31B/A356复合板微观组织及力学性能研究. 硕士学位论文, 兰州理工大学, 2019.
62 Xie W F, Xie J P, Wang A Q, et al. Special Casting & Nonferrous Alloys, 2019, 39(12), 1294 (in Chinese).
谢文芳, 谢敬佩, 王爱琴, 等. 特种铸造及有色合金, 2019, 39(12), 1294.
63 Yu C, Wu Z H, Guo Z X, et al. Iron & Steel, 2018, 53(4), 42 (in Chinese).
余超, 吴宗河, 郭子楦, 等. 钢铁, 2018, 53(4), 42.
64 Liu Y Z, Wang W Y, Huang Y B, et al. Special Casting & Nonferrous Alloys, 2018, 38(11), 1230 (in Chinese).
刘亚洲, 王文焱, 黄亚博, 等. 特种铸造及有色合金, 2018, 38(11), 1230.
65 Huang H G, Dong Y K, Yan M, et al. Transactions of Nonferrous Metals Society of China, 2017, 27(5), 1019.
66 Lu W K, Xie J P, Wang A Q, et al. Materials for Mechanical Engineering, 2014, 38(3), 14 (in Chinese).
路王珂, 谢敬佩, 王爱琴, 等. 机械工程材料, 2014, 38(3), 14.
67 Cheng M Y, Wang A Q, Mao Z P, et al. Journal of Henan University of Science and Technology:Natural Science, 2017, 38(1), 10 (in Chinese).
程明阳, 王爱琴, 毛志平, 等. 河南科技大学学报(自然科学版), 2017, 38(1), 10.
68 Wang S H, Luo X B, Su H, et al. Journal of Iron and Steel Research, 2019, 31(10), 937 (in Chinese).
王世宏, 罗小兵, 苏航, 等. 钢铁研究学报, 2019, 31(10), 937.
69 Yu C. Study on microstructures and interfacial properties of hot-roll bonded titanium steel clad plate. Ph. D. Thesis, Yanshan University, China, 2019 (in Chinese).
余超. 热轧制备钛/钢复合板显微组织和界面性能研究. 博士学位论文, 燕山大学, 2019.
70 Tian S W, Jiang H T, Liu J X, et al. Materials Reports, 2019, 33(24), 4141 (in Chinese).
田世伟, 江海涛, 刘继雄, 等. 材料导报, 2019, 33(24), 4141.
[1] 聂浩, 徐洋, 柯黎明, 邢丽. 转速对厚板铝/镁异种材料搅拌摩擦焊摩擦产热及界面组织的影响[J]. 材料导报, 2023, 37(8): 21090144-6.
[2] 杨赟, 刘璇, 崔益华, 余彤, 武康乐, 潘蕾. 植物纤维增强树脂基复合材料界面纳米化改性的研究进展及应用[J]. 材料导报, 2023, 37(8): 21100069-11.
[3] 王振军, 阎凤凤, 张含笑, 梁晴陨. 乳化沥青与RAP再生界面融合特征研究进展[J]. 材料导报, 2023, 37(7): 21030199-10.
[4] 朱雪伟, 王海斗, 刘明, 朴钟宇. 等离子熔覆数值模拟研究现状[J]. 材料导报, 2023, 37(7): 21040228-9.
[5] 谭钦文, 邓黎鹏, 易润华, 程东海, 李东阳. Ni中间层镁/钛异种材料电阻点焊接头组织与性能[J]. 材料导报, 2023, 37(7): 21090077-4.
[6] 罗重阳, 李宇杰, 王丹琴, 刘双科, 陈宇方, 郑春满. 改性电解液促进均匀锂沉积的研究进展[J]. 材料导报, 2023, 37(6): 21070209-11.
[7] 张隽, 冯瑞成, 姚永军, 杨晟泽, 曹卉, 付蓉, 李海燕. 片层状TiAl-Nb合金中γ/γ界面体系拉伸行为的原子模拟[J]. 材料导报, 2023, 37(6): 21080280-6.
[8] 王群, 李晨宇, 周忠华, 曹文, 周子吉, 孙慧慧, 黄悦, 沈志奇. 化学钢化前后玻璃表面裂纹扩展的实验比较与数值模拟[J]. 材料导报, 2023, 37(5): 21050255-5.
[9] 谢吉林, 彭程, 谢菀新, 淦萌萌, 章文滔, 吴集思, 陈玉华. 铝/镁异种合金磁脉冲焊接接头组织与性能研究[J]. 材料导报, 2023, 37(5): 22010051-5.
[10] 张忠科, 蒋常铭, 李轩柏, 熊建强, 童辉. 汽车用铝钢无匙孔搅拌摩擦点焊接头组织及界面特征研究[J]. 材料导报, 2023, 37(5): 21070281-6.
[11] 杨医博, 夏英淦, 刘少坤, 肖祺枫, 郭文瑛, 王恒昌. 铣削型钢纤维与超高性能混凝土的界面粘结性能研究[J]. 材料导报, 2023, 37(4): 22020028-9.
[12] 邱继生, 朱梦宇, 周云仙, 高徐军, 李蕾蕾. 粉煤灰对煤矸石混凝土界面过渡区的改性效应[J]. 材料导报, 2023, 37(2): 21050280-7.
[13] 罗蓉, 王伟, 罗晶, 习磊. 多尺度评价相对湿度对沥青-集料黏附性的影响[J]. 材料导报, 2023, 37(2): 21060216-6.
[14] 杨薛明, 胡宗杰, 王炜晨, 刘强, 王帅. 利用蔗糖改性氮化硼提高环氧树脂复合材料的导热性能[J]. 材料导报, 2023, 37(2): 21110039-6.
[15] 梁梦, 黎振华, 刘美红, 罗心磊, 解靖伟. 选区激光熔化Fe-10Cu合金成形工艺优化研究[J]. 材料导报, 2023, 37(14): 21110123-7.
[1] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
[2] Haoqi HU,Cheng XU,Lijing YANG,Henghua ZHANG,Zhenlun SONG. Recent Advances in the Research of High-strength and High-conductivity CuCrZr Alloy[J]. Materials Reports, 2018, 32(3): 453 -460 .
[3] Yanchun ZHAO,Congyu XU,Xiaopeng YUAN,Jing HE,Shengzhong KOU,Chunyan LI,Zizhou YUAN. Research Status of Plasticity and Toughness of Bulk Metallic Glass[J]. Materials Reports, 2018, 32(3): 467 -472 .
[4] Xinxing ZHOU,Shaopeng WU,Xiao ZHANG,Quantao LIU,Song XU,Shuai WANG. Molecular-scale Design of Asphalt Materials[J]. Materials Reports, 2018, 32(3): 483 -495 .
[5] Yongtao TAN, Lingbin KONG, Long KANG, Fen RAN. Construction of Nano-Au@PANI Yolk-shell Hollow Structure Electrode Material and Its Electrochemical Performance[J]. Materials Reports, 2018, 32(1): 47 -50 .
[6] Ping ZHU,Guanghui DENG,Xudong SHAO. Review on Dispersion Methods of Carbon Nanotubes in Cement-based Composites[J]. Materials Reports, 2018, 32(1): 149 -158 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅠ:Raw Materials and Mix Proportion Design Method[J]. Materials Reports, 2018, 32(1): 159 -166 .
[8] Guiqin HOU,Yunkai LI,Xiaoyan WANG. Research Progress of Zinc Ferrite as Photocatalyst[J]. Materials Reports, 2018, 32(1): 51 -57 .
[9] Jianxiang DING,Zhengming SUN,Peigen ZHANG,Wubian TIAN,Yamei ZHANG. Current Research Status and Outlook of Ag-based Contact Materials[J]. Materials Reports, 2018, 32(1): 58 -66 .
[10] Jing WANG,Hongke LIU,Pingsheng LIU,Li LI. Advances in Hydrogel Nanocomposites with High Mechanical Strength[J]. Materials Reports, 2018, 32(1): 67 -75 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed