钎涂技术的研究进展

材料导报

2021, Vol. 35

Issue (z2): 333-340

金属与金属基复合材料

钎涂技术的研究进展

司浩¹, 秦建^1,2, 钟素娟¹, 龙伟民¹, 王自东², 沈元勋¹, 董显¹

1 郑州机械研究所有限公司新型钎焊材料与技术国家重点实验室,郑州 450001
2 北京科技大学材料科学与工程学院,北京 100000

Research Advancing in Brazing Coating Technology

SI Hao¹, QIN Jian^1,2, ZHONG Sujuan¹, LONG Weimin¹, WANG Zidong², SHEN Yuanxun¹, DONG Xian¹

1 State Key Laboratory of Advanced Brazing Filler Metals & Technology, Zhengzhou Research Institute of Mechanical Engineering Co., Ltd., Zhengzhou 450001, China
2 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100000, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 12048KB )
输出: BibTeX | EndNote (RIS)

摘要钎涂技术因其具有冶金结合强度高、复杂构件适应性好、制备涂层厚度范围大、涂层表面精度高等优点,广泛应用于航空航天、农业机械、石油钻探、矿山开采等领域,是近年来快速发展的一种表面涂层制备技术。本文首先介绍了钎涂的技术原理,其次详细综述了钎涂所用的钎焊材料、钎涂材料的预置方式与钎涂的焊接方法,然后对钎涂技术在各个领域中的应用进行了评述,最后指出钎涂技术现阶段存在的问题,并展望了钎涂技术未来发展的方向。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	司浩
	秦建
	钟素娟
	龙伟民
	王自东
	沈元勋
	董显

关键词: 钎涂镍基钎料金刚石碳化钨表面工程技术

Abstract: Brazing coating technology is widely used in aerospace, agricultural machinery, oil drilling, mining and other fields due to its advantages of high metallurgical bonding strength, good adaptability to complex components, large thickness range of prepared coatings, and high surface precision of coatings. It is a rapid development of surface coating preparation technology in recent years. This article firstly introduces the technical principles of brazing coating, and then it reviews in detail the brazing materials used in brazing, the preset methods of brazing materials and the welding methods of brazing coating, and then the application of brazing coating technology in various fields is reviewed. Finally, it pointed out the existing problems of brazing coating technology at this stage, and looked forward to the future development direction of brazing coating technology.

Key words: brazing coating Ni-based filler alloy diamond tungsten carbide surface engineering technology

发布日期: 2021-12-09

ZTFLH:

TG454

基金资助: 国家自然科学基金(U2004186)

通讯作者: qinjianzzu@163.com

作者简介: 司浩,硕士研究生,于2019年9月在机械科学总院郑州机械研究所学习,主要从事新型钎焊工艺开发。
秦建,硕士,工程师,主要从事焊接冶金与焊接新材料、焊接新工艺等领域的研究与开发。发表论文40余篇。

引用本文:

司浩, 秦建, 钟素娟, 龙伟民, 王自东, 沈元勋, 董显. 钎涂技术的研究进展[J]. 材料导报, 2021, 35(z2): 333-340.
SI Hao, QIN Jian, ZHONG Sujuan, LONG Weimin, WANG Zidong, SHEN Yuanxun, DONG Xian. Research Advancing in Brazing Coating Technology. Materials Reports, 2021, 35(z2): 333-340.

链接本文:

http://www.mater-rep.com/CN/ 或 http://www.mater-rep.com/CN/Y2021/V35/Iz2/333

1 徐滨士,谭俊,陈建敏,等.中国表面工程,2011,24(2),1.
2 Ma Q, Li Y, Wang J, et al. Journal of Alloys and Compounds, 2015, 645, 151.
3 Liu J, Yang S, Xia W, et al. Journal of Alloys and Compounds, 2016, 654, 63.
4 Gisario A, Puopolo M, Venettacci S, et al. International Journal of Refractory Metals and Hard Materials, 2015, 52, 123.
5 Berger L M. International Journal of Refractory Metals and Hard Materials, 2015, 49,350.
6 张启运,庄鸿寿.钎焊手册,机械工业出版社,2018
7 李凯,王飞,张超,等.热加工工艺,2017,46(13),19.
8 Sekulic D P. Advances in brazing, Woodhead Publishing, UK,2013.
9 王星星,武胜金,李帅,等.中国有色金属学报,2021,31(01),72.
10 徐德生. 仿生非光滑耐磨复合涂层的研究.博士学位论文,吉林大学,2004.
11 侯立宁.表面技术,2012,41(4),49.
12 Chattopadhyay A K, Chollet L, Hintermann H E. Surface and Coatings Technology, 1991, 45(1-3), 293.
13 迟静,王淑峰,李敏,等.中国表面工程,2021,34(01),85.
14 Lu S P, Kwon O Y. Surface and Coatings Technology, 2002, 153(1), 40.
15 陈川辉,张林进,李庆棠,等.南京工业大学学报(自然科学版),2012,34(06),42.
16 谭兵,赵宝荣,樊建勋,等.兵器材料科学与工程,2003(01),19.
17 Liu T, Joo H G, Gao L X, et al. International Journal of Refractory Metals and Hard Materials, 2012, 35,246.
18 樊帅奇,张蕾涛,李海涛,等.材料热处理学报,2021,42(06),157.
19 张蕾涛,段理,刘德鑫,等.金属热处理,2021,46(04),167.
20 王智慧,杨爱弟,张田,等.材料工程,2008(09),56.
21 闵婷,高义民,李烨飞,等.稀有金属材料与工程,2012,41(02),271.
22 张杰,魏天路,李大胜,等.材料热处理学报,2020,41(11),153.
23 Wang D, Wang W Q, Chen X G, et al. Surface and Coatings Technology, 2017, 325,200.
24 薛敏鹏,韩彬,王勇,等.激光与光电子学进展,2011,48(09),85.
25 王文琴,王昭漫,王德,等.焊接,2017(12),41.
26 杨贤群,王立楠,孙逸铭,等.聊城大学学报(自然科学版),2016,29(1),47.
27 秦建,龙伟民,路全彬,等.材料导报,2020,34(S2),1457.
28 Shen J Y, Li L J, Wu X, et al. International Journal of Refractory Metals and Hard Materials,2019,84, 104973.
29 Ma B J, Lou J P, Pang Q. Journal of Materials Engineering and Perfor-mance,2014,23(4),1505.
30 Ma B J, Yang G L, Bu F N. International Journal of Refractory Metals and Hard Materials,2017,62,58.
31 潘蕾,陈锋,陶杰,吴申庆.复合材料学报,2002(4),114.
32 徐德生,任露泉,邱小明,等.农业机械学报,2004(6),148.
33 周霞,王越,周继扬,等.金属学报,2007(4),433.
34 齐剑钊.WC增强Cu基钎涂涂层的绿色技术研究.硕士研究论文,机械科学研究总院,2011.
35 裴新军,张建纲,黄继华,等.粉末冶金技术,2006(1),8.
36 李伟强,程楠,黄继华,等.焊接,2015,(2),29.
37 胡亮亮,沈承金,董衍林,等.热处理,2013,28(1),37.
38 Zhou R, Jiang Y H, Lu D H. Wear,2003,255(1-6),134.
39 Bach F, Wilhelm L A, Wenz T. Modern Surface Technology, Wiley-VCH Verlag GmbH & Co. KGaA, Germany,2006.
40 潘凤洋.碳化钨柔性布涂层的制备及其性能研究.硕士学位论文,华东理工大学,2016.
41 陆善平,郭义,陈亮山.材料导报,1999,(6),58.
42 Lu S P, Kwon O Y, Guo Y. Wear, 2003, 254(5-6),421.
43 Xu X P, He L, Xia C Z, et al. High Temperature Materials and Processes, 2019, 38(2019),60.
44 Xu X, Ding H, Xia C, et al. Coatings, 2019, 9(4), 214.
45 Zhu J W, Zou J S, Qiao Y X, et al. Journal of the Korean Physical Society,2020,76(11),1035.
46 Xu X P, Wang Y, Liu C, et al. Coatings,2019,9(11),703.
47 张宝军,张长军.筑路机械与施工机械化,2020,37(05),11.
48 Yang Y L, Sun Y F, Shen J J, et al. Journal of Surface Engineered Materials and Advanced Technology, 2012,2(1),40.
49 黄本生,高钰枭,陈鹏,等.材料导报,2018,32(13),2272.
50 杜圣恩,林晨,姚永强,等.机械工程材料,2019,43(7),38.
51 张大伟,雷廷权,李强.中国表面工程,1999(3),1.
52 Long W, Liu D, Wu A, et al. Diamond and Related Materials, 2020, 110,108085.
53 Long W, Liu D, Dong X, et al. Surface Engineering, 2020, 36(12),1315.
54 赵龙志,邓楚祥,王震,等.表面技术,2020,49(10),39.
55 肖奇,孙文磊,刘金朵,等.材料导报,2021,35(8),8146.
56 Guo C, Zhou J, Chen J, et al. Wear, 2011, 270(7-8), 492.
57 周许升,邹伟,龙伟民,等.电焊机,2018,48(3),205.
58 丁天然,黄俊兰,路全彬,等.超硬材料工程,2018,30(05),20.
59 黄俊兰,龙伟民,路全彬,等.焊接,2018(11),26.
60 卜凡宁. WC/Ni复合钎涂工艺及单面涂层刀具自锐性的研究.硕士学位论文,青岛科技大学,2018.
61 Wang Y, Qiu X M, Sun D Q, et al. International Journal of Refractory Metals and Hard Materials, 2011, 29(2),293.62 李奇林,徐九华,苏宏华,等.工具技术,2016,50(10),15.
63 杨二娟,李勇,李巍,等.表面技术,2019,48(9),238.
64 沈婧怡,任维彬,薛亚平,等.红外与激光工程,2019,48(6),358.
65 黄弋力,朱平,孟氢钡.电焊机,2019,49(11),84.
66 王书文,廖玉红,王腾迪.中国表面工程,2021,34(2),94.
67 刘德辉,卢全国,晏建武,等.材料保护,2013,46(12),34.

[1]	段鹏, 彭燕, 王希玮, 韩晓桐, 王笃福, 胡小波, 徐现刚. 用于MPCVD金刚石薄膜生长的高表面质量HTHP金刚石的制备[J]. 材料导报, 2021, 35(4): 4034-4037.
[2]	吴磊, 浦娟, 吴铭方, 龙伟民, 钟素娟, 胡庆贤, 蓝阳. 不同碳化钨含量对等离子弧熔覆镍基碳化钨涂层组织及性能的影响[J]. 材料导报, 2021, 35(16): 16111-16114.
[3]	闫朋朋, 苏伟, 韦小凤, 朱学卫, 王府. 碳负载氮掺杂纳米碳化钨电催化剂的制备及析氢性能[J]. 材料导报, 2021, 35(14): 14007-14011.
[4]	李洪, 许伟, 苏一凡, 林松盛, 代明江, 石倩. 面向石墨模具精密加工的金刚石涂层结构及性能[J]. 材料导报, 2021, 35(14): 14030-14034.
[5]	魏运先, 段锋, 尹育航, 彭凯, 呼丹明, 丁冬海. 连铸烧成铝锆碳质滑板磨削用Fe-Cu-Sn-Ni基结合剂金刚石工具的性能[J]. 材料导报, 2021, 35(14): 14166-14170.
[6]	秦建, 龙伟民, 路全彬, 李胜男, 黄俊兰. 金刚石/NiCrBSi钎涂接头组织与耐磨性能分析[J]. 材料导报, 2020, 34(Z2): 457-461.
[7]	丛卓红, 陈恒达, 郑南翔, 周晚君. 水泥混凝土路面纹理的研究进展[J]. 材料导报, 2020, 34(9): 9110-9116.
[8]	龙伟民, 郝庆乐, 傅玉灿, 黄国钦, 吴铭方, 王裕昌. 金刚石工具钎焊用连接材料研究进展[J]. 材料导报, 2020, 34(23): 23138-23144.
[9]	肖长江, 窦志强, 朱振东. 氧化铁刻蚀金刚石表面形貌的表征及形成机理[J]. 材料导报, 2020, 34(14): 14045-14050.
[10]	侯明, 郭胜惠, 高冀芸, 杨黎, 王梁, 叶小磊. 预合金结合剂成分及烧结工艺对金刚石工具性能的影响[J]. 材料导报, 2019, 33(14): 2403-2407.
[11]	王仕发,李丹明,肖玉华,杨震春,李居平,郝剑,杨长青. 用于空间辐射环境探测的金刚石探测器研究综述[J]. 《材料导报》期刊社, 2018, 32(9): 1459-1468.
[12]	杨贵荣, 宋文明, 王建儒, 张玉福, 王富强, 马颖. 添加碳化钨和石墨改善真空熔覆Ni-Co基合金涂层的极化行为[J]. 材料导报, 2018, 32(6): 924-929.
[13]	张晓宇,许旻,曹生珠. 高导热金刚石/铜复合材料界面修饰研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 443-452.
[14]	张旺玺, 王艳芝, 梁宝岩, 李启泉, 罗伟, 孙长红, 成晓哲, 孙玉周. 纳米金刚石基于功能材料应用的研究现状[J]. 《材料导报》期刊社, 2018, 32(13): 2183-2188.
[15]	赵龙, 宋平新, 张迎九, 杨涛. 高导热金刚石/铜电子封装材料:制备技术、性能影响因素、界面结合改善方法[J]. 《材料导报》期刊社, 2018, 32(11): 1842-1851.

[1]	Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO₂/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2]	Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3]	Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4]	Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5]	Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6]	Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7]	Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8]	Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9]	Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10]	Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .

Viewed

Full text

Abstract

Cited

Shared

Discussed