激光辅助冷喷涂制备高硬度材料涂层的研究进展

doi:10.11896/j.issn.1005-023X.2018.03.011

Abstract
Figure/Table
References
Related Citation (15)

Download:

richhtml

Full Text ( PDF ) (2186KB)
Export: BibTeX | EndNote (RIS)

Abstract

Cold spray is a novel low-temperature and solid-state deposition technique, which is specially appropriate for fabricating the thermosensitive, phase-transition sensitive, oxidation sensitive materials coating. However, the hard material is impossible to deposit by single cold spray. In order to solve the problem, laser irradiation is introduced into the cold spray process to synchronously soften the spraying particles and substrate. The laser don’t only make the hard material deposit on the substrate, but also significantly improving the deposition efficiency, density and bonding strength of coating. The laser assisted cold spray composite technique can be used to fabricate more kinds of meateials. In this paper, the principles, features and advantages of the laser assisted cold spray technique were mainly introduced. The research progress of depositing the hard metal and metal-based composite material by composite technique was summarized.

Key words： cold spray laser composite technique hard metal

Published: 10 February 2018 Online: 2018-02-10

CLC number:	TG178
	TG174.44
	TN249

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Lijing YANG
	Zhengxian LI
	Chunliang HUANG
	Pei WANG
	Jianhua YAO

Cite this article:

Lijing YANG,Zhengxian LI,Chunliang HUANG, et al. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412-417.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.03.011 OR https://www.mater-rep.com/EN/Y2018/V32/I3/412

1	Alkhimov A P, Kosarev V F, Papyrin A N . A method of cold gas-dynamic spraying[J]. Doklady Akademii Nauk Sssr, 1990,315(5):1062.
2	Assadi H, Gartner F, Stoltenhoff T , et al. Bonding mechanism in cold gas spraying[J]. Acta Materialia, 2003,51(15):4379.
3	Li Changjiu . The state-of-art of research and development on cold spraying in China[J]. China Surface Engineering, 2009,22(4):5(in Chinese).
3	李长久 . 中国冷喷涂研究进展[J]. 中国表面工程, 2009,22(4):5.
4	Xie L D, Ma X Q, Jordan E H , et al. Identification of coating deposition mechanisms in the solution-precursor plasma-spray process using model spray experiments[J]. Materials Science and Enginee-ring, 2003,362(1-2):204.
5	Li S Q, Duan Y P, Gong S L , et al. Microstructure and deposition mechanism of laser-hybrid plasma spraying NiCr-Cr3C2 coating[J]. Rare Metal Materials and Engineering, 2013,42:106.
6	Grujicic M, Zhao C L, Derosset W S , et al. Adiabatic shear instabi-lity based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process[J]. Materials and Design, 2004,25(8):681.
7	Ajdelsztajn L, Lavernia E J, Jodoin B , et al. Cold gas dynamic spraying of iron-base amorphous alloy[J]. Journal of Thermal Spray Technology, 2006,15(4):495.
8	Li W Y, Zhang C, Guo X , et al. Ti and Ti-6Al-4V coatings by cold spraying and microstructure modification by heat treatment[J]. Advanced Engineering Materials, 2007,9(5):418.
9	Dosta S, Couto M, Guilemany J M . Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates[J]. Acta Materialia, 2013,61(2):643.
10	Bray M, Cockburn A , O'Neill W. The laser-assisted cold spray process and deposit characterisation[J]. Surface and Coatings Technology, 2009,203(19):2851.
11	Lupoi R, Sparkes M, Cockburn A , et al. High speed titanium coa-tings by supersonic laser deposition[J]. Materials Letters, 2011,65(21):3205.
12	Olakanmi E O, Doyoyo M . Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: A review[J]. Journal of Thermal Spray Technology, 2014,23(5):765.
13	Yao J H, Yang L J, Li B , et al. Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J]. Applied Surface Science, 2015,330:300.
14	Kulmala M, Vuoristo P . Influence of process conditions in laser-assisted low-pressure cold spraying[J]. Surface and Coatings Technology, 2008,202(18):4503.
15	Olakanmi E O, Tlotleng M, Meacock C , et al. Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt%Si coatings: Effects of laser power[J]. The Journal of The Minerals, Metals and Materials Society, 2013,65(6):776.
16	Li B, Yang L J, Li Z H , et al. Beneficial effects of synchronous laser irradiation on the characteristics of cold-sprayed copper coatings[J]. Journal of Thermal Spray Technology, 2015,24(5):1.
17	Luo Fang, Zhao Bing, Yao Jianhua . Numerical simulation of Cu particles impacting on medium steel in laser-assisted cold spraying[J]. Acta Armamentrall, 2015,36(11):2157(in Chinese).
17	骆芳, 赵兵, 姚建华 . 激光辅助冷喷涂Cu颗粒撞击45钢的数值模拟[J]. 兵工学报, 2015,36(11):2157.
18	Yuan Linjiang, Luo Fang, Yao Jianhua , et al. Research progress on supersonic laser deposition[J]. Applied Laser, 2012,32(4):331(in Chinese).
18	袁林江, 骆芳, 姚建华 , 等. 超音速激光沉积研究进展[J]. 应用激光, 2012,32(4):331.
19	Zhong Li, Wang Zhaoyin, Zhang Huadong . Research progress of precipitation mechanism and apparatus of cold spray[J]. Surface Technology, 2015,44(4):15(in Chinese).
19	钟厉, 王昭银, 张华东 . 冷喷涂沉积机理及其装备的研究进展[J]. 表面技术, 2015,44(4):15.
20	Liu Yuzhen, Gui Yewei . The properties and applications of stellite alloys Ⅰ[J]. Materials for Mechanical Engineering, 1992,16(5):1(in Chinese).
20	刘玉珍, 桂业炜 . 司太立合金的性能及应用Ⅰ[J]. 机械工程材料, 1992,16(5):1.
21	Liu Yuzhen, Gui Yewei . The properties and applications of stellite alloys Ⅱ[J]. Materials for Mechanical Engineering, 1992,16(6):1(in Chinese).
21	刘玉珍, 桂业炜 . 司太立合金的性能及应用Ⅱ[J]. 机械工程材料, 1992,16(6):1.
22	Luo F, Cockburn A, Cai D , et al. Simulation analysis of Stellite 6? particle impact on steel substrate in supersonic laser deposition process[J]. Journal of Thermal Spray Technology, 2015,24(3):1.
23	Luo Fang, Liu Jingsong, Zhao Bing , et al. Effect of incident angles of Stellite 6 particles on bonding performance in supersonic laser deposition process[J]. Journal of Zhejiang University of Technology, 2016,44(5):569(in Chinese).
23	骆芳, 刘景松, 赵兵 , 等. 激光沉积Stellite 6颗粒入射角度对涂层形成的影响[J]. 浙江工业大学学报, 2016,44(5):569.
24	Yuan L J, Luo F, Yao J H . Deposition behavior at different substrate temperatures by using supersonic laser deposition[J]. Journal of Iron and Steel Research, 2013,20(10):87.
25	Yuan Linjiang, Zhao Bing, Luo Fang , et al. Numerical simulation of stellite 6 multi particle deposition by laser-assisted cold spraying[J]. Light Industry Machinery, 2017,35(1):19(in Chinese).
25	袁林江, 赵兵, 骆芳 , 等. 激光辅助冷喷涂Stellite6多颗粒沉积的数值模拟[J]. 轻工机械, 2017,35(1):19.
26	Lu Y H, Yuan L J, Cai D B , et al. Effect of the process parameters on the indentation size of particle deposited using supersonic laser deposition[J]. Rare Metal Materials and Engineering, 2014,43(10):2349.
27	Luo Fang, Kong Fanzhi , William O’Neill, et al. Effect of laser heating temperature on coating characteristics of Stellite6 deposited by cold spray[J]. Acta Armamentrall, 2012,33(7):840(in Chinese).
27	骆芳, 孔凡志 , 威廉·欧尼尔,等.激光加热温度对冷喷涂Stellite6合金沉积层表面特性的影响[J]. 兵工学报, 2012,33(7):840.
28	Luo F, Lupoi R, Cockburn A , et al. Characteristics of stellite 6 deposited by supersonic laser deposition under optimized parameters[J]. Journal of Iron and Steel Research, 2013,20(2):52.
29	Luo F, Cockburn A, Lupoi R , et al. Performance comparison of Stellite 6 deposited on steel using supersonic laser deposition and laser cladding[J]. Surface and Coating Technology, 2012,212:119.
30	Li Zhihong, Yang Lijing, Zhang Qunli , et al. Comparative research of Stellite6 coatings prepared by supersonic laser deposition and laser cladding[J]. Chinese Journal of Lasers, 2015,42(5):0503008(in Chinese).
30	李祉宏, 杨理京, 张群莉 , 等. 超音速激光沉积与激光熔覆Stellite 6涂层的对比研究[J]. 中国激光, 2015,42(5):0503008.
31	Yao J H, Li Z H, Li B , et al. Characteristics and bonding behavior of Stellite 6 alloy coating processed with supersonic laser deposition[J]. Journal of Alloys and Compounds, 2016,661:526.
32	Liu Yanhong, Zhang Yingchun, Ge Changchun . Research progress on preparation technologies of tungsten coating[J]. Materials Science and Engineering of Powder Metallurgy, 2011,16(3):315(in Chinese).
32	刘艳红, 张迎春, 葛昌纯 . 金属钨涂层制备工艺的研究进展[J]. 粉末冶金材料科学与工程, 2011,16(3):315.
33	Jones M, Cockburn A, Lupoi R , et al. Solid-state manufacturing of tungsten deposits onto molybdenum substrates with supersonic laser depsition[J]. Materials Letters, 2014,134:295.
34	Gorunov A I, Gilmutdinov A . Investigation of coatings of austenitic steels produced by supersonic laser deposition[J]. Optics and Laser Technology, 2017,88:157.
35	Zhou Shengfeng, Dai Xiaoqin, Zheng Haizhong . Characteristics on structure and properties of WC-Ni60A coatings by laser cladding and laser-induction hybrid cladding[J]. Journal of Mechanical Enginee-ring, 2012,48(7):113(in Chinese).
35	周圣丰, 戴晓琴, 郑海忠 . 激光熔覆与激光-感应复合熔覆WC-Ni60A涂层的结构与性能特征[J]. 机械工程学报, 2012,48(7):113.
36	Yang Lijing, Li Zhihong, Li Bo , et al. Microstructure and deposition mechanism of Ni60 coatings prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 2015,42(3):0306005(in Chinese).
36	杨理京, 李祉宏, 李波 , 等. 超音速激光沉积制备Ni60涂层的显微组织及沉积机理[J]. 中国激光, 2015,42(3):0306005.
37	Yao J H, Yang L J, Li B , et al. Characteristics and performance of hard Ni60 alloy coating produced with supersonic laser deposition technique[J]. Materials and Design, 2015,83:26.
38	Yu Xiaohua, Shao Gangqin, Xie Jiren . Sintering of nano-composite WC-Co powder[J]. Materials Review, 2004,18(5):52(in Chinese).
38	余晓华, 邵刚勤, 谢济仁 . 纳米复合WC-Co粉末的烧结研究进展[J]. 材料导报, 2004,18(5):52.
39	Li Zhihong, Yang Lijing, Li Bo , et al. Microstructural characteristics of WC/Stellite 6 composite coating prepared by supersonic laser deposition[J].Chinese Journal of Lasers,2015(11):148(in Chinese).
39	李祉宏, 杨理京, 李波 , 等. 超音速激光沉积WC/Stellite 6复合涂层显微组织特征的研究[J].中国激光,2015(11):148.
40	Li B, Yao J H, Zhang Q L , et al. Microstructure and tribological performance of tungsten carbide reinforced stainless steel composite coatings by supersonic laser deposition[J]. Surface and Coatings Technology, 2015,275:58.
41	Li Penghui, Li Bo, Zhang Qunli , et al. Comparative study on microstructure and performance of WC/SS316L composite coatings prepared by supersonic laser deposition and laser cladding[J]. Chinese Journal of Lasers, 2016,43(11):1102002(in Chinese).
41	李鹏辉, 李波, 张群莉 , 等. 超音速激光沉积与激光熔覆WC/SS316L复合沉积层显微组织与性能的对比研究[J]. 中国激光, 2016,43(11):1102002.
42	Luo F, Cockburn A, Sparkes M , et al. Performance characterization of Ni60-WC coating on steel processed with supersonic laser deposition[J]. Defence Technology, 2015,11(1):35.
43	Feudis M D, Caricato A P, Taurino A , et al. Diamond graphitization by laser-writing for all-carbon detector applications[J]. Diamond and Related Materials, 2016,75:25.
44	Suo Xinkun, Yang Guanjun, Li Changjiu . Preparation of Ni-based alloy diamond composite coatings by cold spray[J]. Materials Research and Application, 2009,3(1):32(in Chinese).
44	所新坤, 杨冠军, 李长久 . 镍基金刚石复合涂层的冷喷涂制备[J]. 材料研究与应用, 2009,3(1):32.
45	Aldwell B, Yin S , McDonnell K, et al. A novel method for metal-diamond composite coating deposition with cold spray and formation mechanism[J]. Scripta Materialia, 2016,115:10.
46	Yao J H, Yang L J, Li B , et al. Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J]. Applied Surface Science, 2015,330:300.
47	Yang Lijing, Li Bo , et al. Microstructure of diamond/Ni60 compo-site coatings produced by supersonic laser deposition and laser cladding[J]. Transactions of Materials and Heat Treatment, 2016,37(6):221(in Chinese).
47	杨理京, 李波 , 等. 超音速激光沉积于激光熔覆金刚石强化涂层的组织形态[J]. 材料热处理学报, 2016,37(6):221.
48	Yang L J, Li B, Yao J H , et al. Effects of diamond size on the deposition characteristic and tribological behavior of diamond/Ni60 composite coating prepared by supersonic laser deposition[J]. Diamond and Related Materials, 2015,58:139.
49	Morimoto J, Onoda T, Sasaki Y , et al. Improvement of solid cold sprayed TiO2-Zn coating dire ct diode laser[J]. Vacuum, 2004,73:527.
50	Danlos Y, Costil S, Guo X , et al. Ablation laser and heating laser combined to cold spraying[J]. Surface and Coatings Technology, 2010,205:1055.
51	Rolland G, Sallamand P, Guipont V , et al. Laser-induced damage in cold-sprayed composite coatings[J]. Surface and Coatings Technology, 2011,205:4915.
52	Sova A, Grigoriev S, Okunkova A , et al. Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment[J]. Surface and Coatings Technology, 2013,235:283.
53	Poza P, Múnez C J , Garrido-Maneiro M A, et al. Mechanical pro-perties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysis[J]. Surface and Coatings Technology, 2014,243:51.
54	Pavel P, Sergei G, Shishkovsky I , et al. Laser post annealing of cold-sprayed Al/alumina-Ni composite coatings[J]. Surface and Coatings Technology, 2015,271:265.
55	Astaritaa A, Genna S, Leone C , et al. Study of the laser remelting of a cold sprayed titanium layer[J]. Procedia CIRP, 2015,33:452.