包埋渗技术在镍基高温合金中的应用

材料导报

2021, Vol. 35

Issue (Z1): 389-394

金属与金属基复合材料

包埋渗技术在镍基高温合金中的应用

唐紫苑¹, 张淑婷¹, 杜开平², 宣鹏举¹, 司丽娜¹

1 北方工业大学机械与材料工程学院,北京 100144
2 矿冶科技集团有限公司,北京 100160

Application of Pack Cementation Technology in Nickel-based Superalloys

TANG Ziyuan¹, ZHANG Shuting¹, DU Kaiping², XUAN Pengju¹, SI Lina¹

1 Department of Materials Science and Engineering, North China University of Technology, Beijing 100144, China
2 BGRIMM Technology Group, Beijing 100160, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 4450KB )
输出: BibTeX | EndNote (RIS)

摘要包埋渗是一种应用广泛的表面防护技术,包埋渗制备的渗层具有均匀性好、渗层致密、与基体粘结性好等优点,可为高温下服役的零件提供抗高温氧化及热腐蚀防护。文章简要介绍了镍基高温合金包埋渗剂的组成,系统阐述了表面渗层材料体系从单组元渗铝到多组元共渗的研究进展,对比了渗Al,Al-Co、Al-Si、Cr-Al、Pt-Al等二元共渗以及稀土复合渗等不同渗层体系对涂层高温综合性能的影响,并对稀土在包埋渗技术的作用机理进行了探讨,展望了包埋渗技术的发展方向。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	唐紫苑
	张淑婷
	杜开平
	宣鹏举
	司丽娜

关键词: 镍基合金高温防护包埋渗渗剂抗氧化性能

Abstract: Pack cementation is a widely used surface protection technology. The layer prepared by pack cementation has the advantages of good uniformity, good compactness and good adhesion with matrix, which can provide high-temperature oxidation resistance and thermal corrosion protection for parts in service at high temperature. In this paper, the embedding of impregnation agent was introduced, the research progress about cementation layer nickel-based superalloy material system was systematically reviewed, which from monopropellant aluminized to multiple sets of altogether permeability. The influence of different infiltration layer systems on the comprehensive properties of the coating at high temperature was compared, including Al, Al-Co, Al-Si ,Cr-Al, Pt-Al binary infiltration and rare earth compound infiltration. And also, the mechanism of rare earth in the pack cementation technology was discussed. The development direction of pack cementation technology was prospected in the end.

Key words: nickel-based superalloy high temperature protection pack cementation permeating agent oxidation resisitance

发布日期: 2021-07-16

ZTFLH:

TG174.445

基金资助: 北京市基金-市教委联合资助项目(KZ201910009010);北方工业大学高层次人才科研启动项目(XN277);毓杰团队项目(XN212/009)

通讯作者: zhangst@ncut.edu.cn

作者简介: 唐紫苑,2018年6月毕业于湖南人文科技学院。现为北方工业大学机械与材料工程学院硕士研究生,目前主要研究领域为高温防护涂层的制备。张淑婷,北方工业大学机械与材料工程学院教授、硕士研究生导师。2006年毕业于东北大学,获得有色金属冶金博士学位。主要从事高品质金属及合金粉末成分设计计算,航空、舰船发动机高温热端部件表面功能化工艺及失效机理研究,合金材料3D打印技术研究等工作,材料应用领域包括航空、舰船、电力、冶金等。近五年,共负责及参加的国家项目近30项,其中包括“国家自然科学基金”、国家重点研发计划、“863”、“国际合作”等项目,已完成的项目获省部级奖励共17项;在国家及省部级以上核心期刊发表论文多篇,申请国家发明专利近20 项。

引用本文:

唐紫苑, 张淑婷, 杜开平, 宣鹏举, 司丽娜. 包埋渗技术在镍基高温合金中的应用[J]. 材料导报, 2021, 35(Z1): 389-394.
TANG Ziyuan, ZHANG Shuting, DU Kaiping, XUAN Pengju, SI Lina. Application of Pack Cementation Technology in Nickel-based Superalloys. Materials Reports, 2021, 35(Z1): 389-394.

链接本文:

http://www.mater-rep.com/CN/ 或 http://www.mater-rep.com/CN/Y2021/V35/IZ1/389

1 Koo C H, Bai C Y, Luo Y J. Materials Chemistry & Physics, 2004, 86(2-3), 258
2 Goward G W, Cannon L W. J Eng. Gas Turbines Power, 1988,110 (1), 150.
3 Bose S. High Temperature Coatings, Butterworth-Heinemann, Oxford, UK, 2007.
4 Goward G W, Boone D H. Oxidation of Metals, 1971, 3 (5), 475.
5 Cava S, Tebcherani S M, Pianaro S A,et al.Materials Chemistry and Physics, 2006, 97, 102.
6 Mohammadi K, Haghi A K. Journal of Materials Processing Technology, 2008, 201, 669.
7 FrancescoBozza, Giovanni Bolelli, Carlo Giolli. et al.Surface & Coatings Technology, 2014, 239, 147.
8 Lu Tong, Yao Dengzun, Zhou Chungen. Chinese Journal of Aeronautics,2010,96,102.
9 Xiang Z D. Acta Materialia, 2006, 54 (5), 4453.
10 杨涵宇, 陈芊屹, 陈浩然, 等. 热加工工艺, 2016, 45(16), 141.
11 李玉春, 杜保成, 付保红, 等. 油气田地面工程, 2012, 31(8), 92.
12 李玉春, 曹丰慧, 吴广涛, 等. 大庆师范学院学报, 2012, 32(6), 85.
13 王福会. 材料保护, 1992(4), 45.
14 Rairden III J R. US Patent, 4101714.1997.
15 Min Qiao, Chungen Zhou. Corrosion Science, 2013, 75, 454.
16 李玉春, 崔莲, 车继馨, 等.大庆师范学院学报, 2018, 38(3), 19.
17 袁比飞, 卢贵武. 北京航空航天大学学报, 2011, 37(1), 122.
18 马春春, 孙建刚, 刘镇洋, 等. 热喷涂技术, 2016, 8(2), 30.
19 Beltran A M, Shores D A. The superalloys, Wiley-Interscience, New York, 1972, pp. 317.
20 Fan Q X, Jiang S M, Yu H J, et al. Applied Surface Science, 2014, 311, 214.
21 Fu C, Kong W K, Cao G H. Surface and Coatings Technology, 2014, 258, 347.
22 Datta P K, Xiang Z D. Materials Science and Engineering, 2003, 356(1-2), 136.
23 Xiang Z D, Datta P K. Materials Science and Engineering A, 2003, 356, 136.
24 付超, 任忠鸣, 操光辉. 稀有金属材料与工程, 2017, 46(6), 1612.
25 蔡玉林, 郑运荣, 莫龙生, 等. 航空学报, 1985, 63(6), 60.
26 任鑫. 几种高温防护涂层的高温氧化和热腐蚀行为研究. 硕士学位论文, 南京理工大学, 2005.
27 Xiao Yu, Peng Song, Xuan He, et al. Journal of Alloys and Compounds, 2019, 790, 228.
28 褚虎儿, 曹铁梁, 石声泰.中国腐蚀与防护学报,1987,7(2),4.
29 Xiang Z D, Burnell-Gray J S, Datta P K. Surface Engineering,2001, 17, 287.
30 Costa W Da, Gleeson B, Young D J, et al.Joumal of the Electrochemical Society, 1994, 10, 2690.
31 王明静. 镍基高温合金表面铬铝涂层的制备与抗高温腐蚀性能研究. 硕士学位论文, 西安科技大学, 2011.
32 R Q Lin, C Fu, M Liu, et al. Surface & Coatings Technology, 2017, 310, 273.
33 牛焱, 刘刚, 吴维. 腐蚀科学与防护技术, 2000(2), 3.
34 Pauletti E, et al. Surface & Coatings Technology, 2017, 332, 57.
35 宋鹏, 陆建生, 吕建国, 等. 稀有金属材料与工程, 2010, 39(4), 613.
36 刘刚, 牛焱, 王文, 等.中国腐蚀与防护学报, 2001(1), 55.
37 黄志荣, 徐宏, 李培宁. 稀土, 2002, 23(1), 38.
38 Zhang Haijun, Sun Jianfeng. RareMetal Materials and Engineering, 2017, 46(2), 0301.
39 Xiang Z D, Datta P K. Surface and Coatings Technology, 2004, 179, 95.
40 Cao G H,Yao P P , Fu C, et al. Surface & Coatings Technology, 2013, 224,57.
41 王福会. 材料保护, 1993(10),4.
42 曹将栋. 中国专利, CN201610154897.2, 2016.
43 Peng X, Li T, Pan W P. Scripta Materialia, 2001, 44(44), 1033.
44 帅文文. GH586镍基高温合金渗铝涂层抗高温氧化性能的研究. 硕士学位论文, 江苏大学, 2017.
45 Giggins C S, Pettit F S. Journal of the Electrochemical Society, 1971, 118, 1782.
46 Liu Yingtian,Guo Xiping. Progress in Natural Science: Materials International, 2013,23(2),190.
47 Liu Zongjie, Zhao Xiongsheng, Zhou Chungen.Corrosion Science, DOI:10.1016/j.corsci.2014.11.043.
48 Li Yongquan, Li Jilin, Qin Chun, et al.Journal of Central South University, 2020, 27, 381.
49 Li Haixia, Qiao Min, Zhou Chungen.Materials Chemistry and Physics, 2014, 143, 915.
50 Qiao Min, Zhou Chungen. Corrosion Science, 2013, 75, 454.
51 童福利.GH586镍基高温合金包埋渗涂层的抗高温氧化性能研究. 硕士学位论文, 江苏大学, 2017.
52 Pint B A. Journal of the Electrochemical Society, 2003, 86(4), 686.
53 黄太红.氧化物弥散强化CoNiCrAlY 和 FeCrAl高温合金的氧化行为研究. 硕士学位论文, 昆明理工大学,2018.
54 Cao Jiangdong, Gong Shaojun. Rare Metal Materials and Engineering, 2018, 389, 42.
55 姚艳斌. 包埋法等离子喷涂制备热障涂层抗高温氧化性能研究. 硕士学位论文, 江苏大学,2017.

[1]	封帆, 王美玲, 李振华, 陆永浩. 超超临界机组用HR3C奥氏体耐热钢研究进展[J]. 材料导报, 2021, 35(9): 9186-9195.
[2]	初铭强, 丁仁根, 张书彦, 郑江鹏, 张楠. 航空零部件加工表面完整性[J]. 材料导报, 2021, 35(7): 7183-7189.
[3]	张勇, 张耿飞, 张宇涛, 宁璠, 晁奕, 冯鹏发. CeO₂掺杂Si-B复合涂层的制备及氧化行为[J]. 材料导报, 2020, 34(18): 18035-18038.
[4]	姚宏伟, 卢一平, 曹志强, 王同敏, 李廷举. FCC/L1₂共格高熵高温合金的研究进展[J]. 材料导报, 2020, 34(17): 17041-17046.
[5]	马文彬, 郭京京, 骆红云, 唐君, 杨晓光. 低塑性加工对定向凝固镍基合金DZ125高温氧化性能的影响[J]. 材料导报, 2020, 34(10): 10093-10097.
[6]	范舟, 黄泰愚, 刘建仪. 硫对镍基合金825(100)电子结构影响的密度泛函研究[J]. 材料导报, 2019, 33(z1): 332-336.
[7]	平学龙, 符寒光, 孙淑婷. 激光熔覆制备硬质颗粒增强镍基合金复合涂层的研究进展[J]. 材料导报, 2019, 33(9): 1535-1540.
[8]	包鑫, 柏胜强, 吴子华, 吴汀, 顾明, 谢华清. CoSb₃基方钴矿热电材料保护涂层研究进展[J]. 材料导报, 2019, 33(5): 784-790.
[9]	朱红梅, 李柏春, 朱锦云, 邱长军, 唐忠锋. 熔盐堆用镍基合金在熔融氟盐中的腐蚀研究进展[J]. 材料导报, 2019, 33(11): 1813-1820.
[10]	苏义祥, 张志坚, 邱晓来, 刘解放, 申楠, 刘世铎. Cr₃C₂对45钢表面超音速火焰喷涂制备的Ni基合金涂层热态抗磨损性能的影响[J]. 材料导报, 2018, 32(6): 899-904.
[11]	王瑶, 赵雪妮, 党新安, 王旭东, 张黎, 杨建军, 何富珍, 张伟刚, 刘庆瑶. 海洋环境下钢材表面镀铝工艺的研究进展[J]. 材料导报, 2018, 32(21): 3805-3813.
[12]	卢国锋. Si-O-C界面对C/Si-C-N复合材料性能的影响^*[J]. 《材料导报》期刊社, 2017, 31(16): 121-124.

[1]	Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[2]	Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[3]	WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[4]	HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[5]	ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[6]	CHEN Bida, GAN Guisheng, WU Yiping, OU Yanjie. Advances in Persistence Phosphors Activated by Blue-light[J]. Materials Reports, 2017, 31(21): 37 -45 .
[7]	ZHANG Yong, WANG Xiongyu, YU Jing, CAO Weicheng,FENG Pengfa, JIAO Shengjie. Advances in Surface Modification of Molybdenum and Molybdenum Alloys at Elevated Temperature[J]. Materials Reports, 2017, 31(7): 83 -87 .
[8]	JIN Chenxin, XU Guojun, LIU Liekai, YUE Zhihao, LI Xiaomin,TANG Hao, ZHOU Lang. Effects of Bulk Electrical Resistivity and Doping Type of Silicon on the Electrochemical Performance of Lithium-ion Batteries with Silicon/Graphite Anodes[J]. Materials Reports, 2017, 31(22): 10 -14 .
[9]	FANG Sheng, HUANG Xuefeng, ZHANG Pengcheng, ZHOU Junpeng, GUO Nan. A Mechanism Study of Loess Reinforcing by Electricity-modified Sodium Silicate[J]. Materials Reports, 2017, 31(22): 135 -141 .
[10]	ZHOU Dianwu, HE Rong, LIU Jinshui, PENG Ping. Effects of Ge, Si Addition on Energy and Electronic Structure of ZrO₂ and Zr(Fe,Cr)₂[J]. Materials Reports, 2017, 31(22): 146 -152 .

Viewed

Full text

Abstract

Cited

Shared

Discussed