Please wait a minute...
材料导报  2022, Vol. 36 Issue (Z1): 21110265-8    
  无机非金属及其复合材料 |
钛合金表面抗氧化玻璃涂层研究进展
王伟, 郭鸽鸽, 丁士杰, 程鹏, 高原, 王快社
西安建筑科技大学冶金工程学院,西安 710055
Research Progress of Anti-oxidation Glass Coating on Titanium Alloy Surface
WANG Wei, GUO Gege, DING Shijie, CHENG Peng, GAO Yuan, WANG Kuaishe
School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China
下载:  全 文 ( PDF ) ( 13116KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 钛合金因其比强度高、密度低、耐蚀性能好等特性已广泛应用于航天、航空、石油化工等领域。然而,钛合金在高温下存在抗氧化性较差、塑韧性较低等缺点严重限制钛合金在高温环境中的应用。玻璃涂层因具有优异的高温稳定性、良好的化学惰性及较高的机械强度等优点可以显著提高钛合金的高温抗氧化性和服役性能,扩大钛合金在航空、航天等高温领域的应用。本文综述了硅酸盐玻璃涂层、硅硼酸盐玻璃涂层、铝硼硅酸盐涂层及硅铝酸盐涂层的研究现状,介绍了玻璃涂层的制备方法,重点分析了钛合金表面玻璃涂层的抗氧化机理,最后对钛合金表面玻璃涂层的发展进行总结和展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王伟
郭鸽鸽
丁士杰
程鹏
高原
王快社
关键词:  钛合金  抗氧化性  高温稳定性  玻璃涂层    
Abstract: Titanium alloy has been widely used in aerospace, petrochemical and other fields due to its high specific strength, low density, and excellent corrosion resistance. However, titanium alloy has some disadvantages such as poor oxidation resistance and low plastic toughness at high temperature, which severely restrict the application of titanium alloys in high temperature environments. Owing to the characteristics of the exceptional high temperature stability, favorable chemical inertness and high mechanical strength, the glass coating can significantly improve the oxidation resistance and the high temperature service performance of titanium alloy, and expand the development of titanium alloy as the parts in the fields of aerospace at high temperature. A series of glass coating including the silicate glass coating, borosilicate coatings, alumino-borosilicate glass coating and aluminosilicate coating were primarily reviewed in this article. And then, the performance characteristics and preparation me-thods of the glass coating were introduced. Subsequently, the anti-oxidation mechanism of the glass coating on the surface of titanium alloy were intensively analyzed. Finally, the future development of the glass coating on the surface of titanium alloy were summarized and prospected.
Key words:  titanium alloy    oxidation resistant    high temperature stability    glass coating
出版日期:  2022-06-05      发布日期:  2022-06-08
ZTFLH:  TG178  
基金资助: 陕西省科技新星基金(2021KJXX-32); 西安市创新能力强基计划-先进制造技术攻关项目(21XJZZ0031)
通讯作者:  gackmol@163.com   
作者简介:  王伟,西安建筑科技大学副教授,博士研究生导师。以第一作者/通讯作者发表SCI收录论文30余篇,主持科研项目20余项,荣获“天津市创新人才促进计划-青年科技优秀人才”、陕西省高校“杰出青年人才”、陕西省青年科技新星等荣誉称号。目前主要从事材料加工中的摩擦与润滑、金属材料表面涂层技术方面的研究工作。
郭鸽鸽,2019年6月毕业于西安建筑科技大学,获得工学学士学位。现为西安建筑科技大学材料加工工程专业硕士研究生。在王伟副教授的指导下进行研究,目前主要研究领域为金属材料的表面涂层技术。
引用本文:    
王伟, 郭鸽鸽, 丁士杰, 程鹏, 高原, 王快社. 钛合金表面抗氧化玻璃涂层研究进展[J]. 材料导报, 2022, 36(Z1): 21110265-8.
WANG Wei, GUO Gege, DING Shijie, CHENG Peng, GAO Yuan, WANG Kuaishe. Research Progress of Anti-oxidation Glass Coating on Titanium Alloy Surface. Materials Reports, 2022, 36(Z1): 21110265-8.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2022/V36/IZ1/21110265
1 Guo C H, Zhou J S, Zhao J R, et al. Tribology Transactions, 2010, 54(1), 80.
2 Rack H J, Qazi J I. Materials Science and Engineering: C, 2006, 26(8), 1269.
3 Mao Y S, Wang L. Wear, 2013, 297(1-2), 1032.
4 Zhang Y, Ma G R, Zhang X C, et al. Corrosion Science, 2017, 122, 61.
5 Cui C X, Hu B M, Zhao L C, et al. Materials and Design, 2011, 32(3), 1684.
6 Akhtar F, Lian Y D, Islam S H, et al. Ironmaking and Steelmaking, 2013, 34(4), 285.
7 Wanjara P, Jahazi M, Monajati H. Materials Science and Engineering, 2006, 416(1-2), 300.
8 Wanjara P, Jahazi M, Monajati H. Materials Science and Engineering, 2005, 396(1-2), 50.
9 Sinha P K, Kain V. Metallurgical and Materials Transactions A, 2020, 51(12), 1.
10 Fargas G, Roa J J, Sefer B, et al. Materials Characterization, 2018, 145, 218.
11 Zhao Q Y, Shi X H, Zeng W D, et al. Journal of Alloys and Compounds, 2015, 647, 740.
12 曾尚武, 江海涛, 赵爱民.稀有金属材料与工程 , 2015, 44(11), 2812.
13 黄明月, 辛社伟, 赵永庆, 等. 稀有金属材料与工程 , 2015, 44(5), 1163.
14 Zu X T, Wang Z G, Feng X D, et al. Surface and Coatings Technology, 2001, 140(2), 161.
15 赵宇光, 周伟, 秦庆东, 等.特种铸造及有色钛合金 , 2004(3), 34.
16 Zhou Y Y, Xie X Y, Song L X. Applied Physics A, 2017, 123(4), 1.
17 李晓楠.中国水运(下半月) , 2008(9), 132.
18 He H Y, Wang Z X, Wang W B, et al. Surface and Coatings Technology, 2007, 201(9), 5705.
19 隋欣梦, 胡记, 张林, 等.表面技术 , 2020, 49(10), 21.
20 Tran B H, Tieu A K, Wan S, et al. Corrosion Science, 2018, 140, 231.
21 Parchovianský M, Petríková I, Švančárek P, et al. International Journal of Applied Ceramic Technology, 2020, 17(4), 1675.
22 Liu P, Wei L Q, Ye S F, et al. Surface and Coatings Technology, 2011, 205(12), 3582.
23 Das S, Mukhopadhyay A K, Datta S, et al. Journal of the European Ceramic Society, 2008, 28(4), 729.
24 Das S, Datta S, Basu D, et al. Ceramics International, 2009, 35(4), 1403.
25 关志峰, 宁伟, 汪庆卫, 等.玻璃与搪瓷 , 2008 (5), 6.
26 何浩然, 许俊强, 苗欣, 等. 材料导报:综述篇, 2019, 33(10), 3227.
27 Shen M L, Zhu S L, Wang F H. Thin Solid Films, 2011, 519(15), 4884.
28 Zheng D Y, Zhu S L, Wang F H. Surface and Coatings Technology, 2006, 200(20-21), 5931.
29 Lopez-Estebana S, Saiza E, Fujinob S, et al. Journal of the European Ceramic Society, 2003, 23(15), 2921.
30 赵帆, 赵乙丞, 齐鹏, 等.工程科学学报 , 2021, 43(2), 232.
31 田鹏, 刘新年, 李争显, 等.中国陶瓷 , 2010, 46(4), 3.
32 宋晓岚, 叶昌, 余海湖.无机材料工艺学, 冶金工业出版社, 2007, pp.88.
33 李娜娜. 钛合金用高温防氧化涂层制备及其性能. 硕士学位论文, 大连理工大学, 2012 .
34 Sarkar S, Datta S, Das S, et al. Surface and Coatings Technology, 2009, 203(13), 1797.
35 Xiao Z Q, Tan F T, Wang W, et al. Surface and Coatings Technology, 2015, 41(1), 325.
36 Xiong Y M, Guan C H, Zhu S L, et al. Ceramics International, 2006, 15(5), 564.
37 周宏明, 贾洋, 李荐, 等.中南大学学报:自然科学版 , 2014, 45(1), 45.
38 Zhu D M, Lou X, Fa L, et al. Transactions of Nonferrous Metals Society of China, 2007, 17(S1), 766.
39 Fan Q, Zhou D L, Yang L, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, 559, 251.
40 Yang S, Zhou D L, Zhou J B, et al. Coatings , 2018, 8(5), 158.
41 Chen G Q, Li N N, Fu X S, et al. Powder Technology, 2012, 230, 134.
42 Zhang M W, Gao C, Ding Y X, et al. Key Engineering Materials, 2008, 373, 601.
43 Xiao Z Q, Tan F T, Wang W, et al. Ceramics International, 2014, 40(2), 3503.
44 Wang L J, Meng C G, Liu C H, et al. Journal of the American Ceramic Society, 2002, 85(11), 2867.
45 段素杰, 李锡春.锻压技术, 2010, 35(1), 114.
46 Li W B, Chen M G, Wang C, et al. Surface and Coatings Technology, 2013, 218, 30.
47 Li W B, Zhu S L, Chen M H, et al. Applied Surface Science, 2014, 292, 583.
48 Li W B, Zhu S L, Wang C, et al. Corrosion Science, 2013, 74, 367.
49 Li W B, Chen K, Liu L L, et al. Materials (Basel, Switzerland), 2020, 13(22), 5085.
50 Shen M L, Zhu S L,Wang F H. Corrosion Science, 2015, 91, 341.
51 Shen M L, Zhu S L, Chen M H, et al. International Journal of Applied Ceramic Technology / Functional Ceramics, 2011, 94(8), 2436.
52 Moskalewicz T, Smeacetto F, Czyrska-Filemonowicz A. Surface and Coa-tings Technology, 2009, 203(16), 2249.
53 Moskalewicz T, Smeacetto F, Cempura G, et al. Surface and Coatings Technology, 2010, 204(21-22), 3509.
54 王连军, 孟长功, 刘长厚, 等.稀有金属材料与工程 , 2003(2), 151.
55 Wang C, Wang W, Zhu S L, et al. Corrosion Science, 2013, 76, 284.
56 孙方红, 马壮, 李福永, 等.硅酸盐通报 , 2012, 31(4), 900.
57 陈玉华, 王勇, 韩 涛.石油大学学报(自然科学版 ) , 2003, 27(5),81.
58 陈玉华. 热加工工艺 , 2009, 38(2), 90.
59 韩涛, 王勇, 陈玉华, 等.石油大学学报(自然科学版) , 2002(5), 68.
60 刘新年, 高档妮, 郭宏伟.材料保护 , 2005(10), 8.
61 陈平虎, 邱长军, 陈勇, 等. 焊接学报 , 2013, 34(1), 4.
62 朱昱, 魏金栋, 张宇, 等.现代化工 , 2015, 35(8), 72.
63 占君, 陈桂明, 张倩.材料科学与工艺 , 2010, 18(3), 326.
64 王婧姝, 牛晓巍, 华伦, 等.材料热处理学报 , 2010, 31(5), 123.
65 Zhang A J, Li Z H, Li Z C, et al. Journal of Sol-Gel Science and Techno-logy, 2008, 49(1), 6.
66 刘伟, 曹俊, 朱鹏飞, 等.材料保护 , 2018, 51(10), 101.
67 黄顺其. TC4钛合金表面玻璃涂层的制备及其抗高温氧化性能表征. 硕士学位论文, 湘潭大学, 2017.
68 Li W B, Chen M H, Wu M Y, et al. Corrosion Science, 2014, 87, 179.
[1] 丁亚文, 肖国庆, 丁冬海, 臧云飞, 陈建军. 晶体硅切割废料对Al2O3-SiC-C铁沟浇注料性能的影响[J]. 材料导报, 2022, 36(6): 21010084-5.
[2] 徐楷昕, 雷振, 黄瑞生, 尹立孟, 方乃文, 邹吉鹏, 曹浩. 40 mm厚TC4钛合金窄间隙激光填丝焊接头组织及性能[J]. 材料导报, 2022, 36(2): 20120180-6.
[3] 姚刚, 刘衍腾, 邓云华, 续润洲, 赵伟. 钛合金蜂窝壁板楔形件静强度测试及失效模式分析[J]. 材料导报, 2021, 35(Z1): 367-370.
[4] 赖旭平, 李天方, 刘瑞, 孙红亮. 元素Nb、Hf、Zr对γ-TiAl合金抗氧化性能的影响[J]. 材料导报, 2021, 35(Z1): 374-377.
[5] 唐紫苑, 张淑婷, 杜开平, 宣鹏举, 司丽娜. 包埋渗技术在镍基高温合金中的应用[J]. 材料导报, 2021, 35(Z1): 389-394.
[6] 封帆, 王美玲, 李振华, 陆永浩. 超超临界机组用HR3C奥氏体耐热钢研究进展[J]. 材料导报, 2021, 35(9): 9186-9195.
[7] 王伟, 王萌, 蔡军, 张浩泽, 史亚鸣, 张晓锋, 黄海广, 王快社. EB炉熔炼TC4钛合金轧制过程中的组织演变与力学性能[J]. 材料导报, 2021, 35(8): 8140-8145.
[8] 初铭强, 丁仁根, 张书彦, 郑江鹏, 张楠. 航空零部件加工表面完整性[J]. 材料导报, 2021, 35(7): 7183-7189.
[9] 黄雪丽, 谭君国, 张腾飞, 莫锦君, 高则翠, 钟星, 王启民. 钛合金表面TiN/CrN纳米多层薄膜的制备及耐磨、耐腐蚀性能[J]. 材料导报, 2021, 35(4): 4139-4143.
[10] 黄子坤, 孙威. 钛合金动态塑性变形过程中绝热剪切带的形成机理[J]. 材料导报, 2021, 35(3): 3122-3128.
[11] 李睿, 周军, 梁武, 张春波, 乌彦全. 热处理制度对TC17钛合金线性摩擦焊接头组织及力学性能的影响[J]. 材料导报, 2021, 35(20): 20057-20061.
[12] 宋庆功, 董珊珊, 胡烨, 康建海, 严慧羽, 王明超, 刘志锋. Mo掺杂对γ-TiAl基合金能量稳定性和抗氧化性的影响[J]. 材料导报, 2021, 35(2): 2057-2063.
[13] 杨家坤, 包翔云, 张金钰, 刘刚, 孙军. 亚稳β钛合金的设计方法及室温变形机制的研究进展[J]. 材料导报, 2021, 35(19): 19170-19180.
[14] 易宗鑫, 李小强, 潘存良, 沈正章. 等轴细晶TC4钛合金应变补偿本构关系及热加工图的研究[J]. 材料导报, 2021, 35(18): 18146-18152.
[15] 陈刚, 罗涛, 沈书成, 陶韬, 唐啸天, 薛伟. 难熔高熵合金的研究进展[J]. 材料导报, 2021, 35(17): 17064-17080.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed