Abstract: This paper introduces some current design methods for metastable β-titanium alloys including alloy element method, molybdenum equivalency, d electronic alloy design and e/a electron concentration methods. In this paper, the research progress of deformation mechanism in metastable β-titanium alloy, such as slip, deformation twinning and stress-induced phase transformation, is summarized, and the relationship between deformation mechanisms and mechanical properties of β-titanium alloy are summarized. Finally, the effects of different factors on the deformation mechanism are discussed, including the β-phase stability, deformation processes, grain orientation/sizes and the second phase.
作者简介: 杨家坤,2019年6月本科毕业于西安交通大学材料科学与工程学院,获得工学学士学位。现为西安交通大学材料科学与工程学院一年级硕士研究生,在张金钰教授的指导下进行研究,目前主要研究领域为高强韧钛合金。 张金钰,西安交通大学材料科学与工程学院教授、博士研究生导师。2005年7月本科毕业于兰州理工大学金属材料专业,分别于2008年和2011年在西安交通大学获得硕士和博士学位。以第一/通讯作者发表SCI论文50余篇,包括Acta Materialia 16篇和International Journal of Plasticity 6篇。荣获了2017年国家自然科学二等奖和2016年教育部自然科学奖一等奖(排名第3),入选第四批“万人计划”中青年科技创新领军人才以及2018年陕西省青年科技新星。
引用本文:
杨家坤, 包翔云, 张金钰, 刘刚, 孙军. 亚稳β钛合金的设计方法及室温变形机制的研究进展[J]. 材料导报, 2021, 35(19): 19170-19180.
YANG Jiakun, BAO Xiangyun, ZHANG Jinyu, LIU Gang, SUN Jun. A Review on Design Methods and Deformation Mechanisms at Room Temperature of Metastable β-Titanium Alloys. Materials Reports, 2021, 35(19): 19170-19180.
1 Kolli R P, Devaraj A. Metals, 2018, 8(7), 506. 2 Cotton J D, Briggs R D, Boyer R R, et al. Jom, 2015, 67(6), 1281. 3 Balazic M, Kopac J, Jackson M J, et al. International Journal of Nano and Biomaterials, 2007, 1(1), 3. 4 Niinomi M. Materials Science and Engineering: A, 1998, 243(1-2), 231. 5 Banerjee D, Williams J. Acta Materialia, 2013, 61(3), 844. 6 Zhu W G, Lei J, Zhang Z, et al. Materials Science and Engineering: A, 2019, 762, 138086. 7 Zhu W G, Lei J, Tan C, et al. Materials & Design, 2019, 168, 107640. 8 Zhu W G, Kou W, Tan C, et al. Materials Science and Engineering: A, 2020, 771, 138611. 9 Ren L, Xiao W, Ma C, et al. Scripta Materialia, 2018, 156, 47. 10 Ren L, Xiao W, Kent D, et al. Scripta Materialia, 2020, 184, 6. 11 Zhang J Y, Sun F, Chen Z, et al. Materials Research Letters, 2019, 7(6), 251. 12 Zhang J Y, Li J S, Chen Z, et al. Journal of Alloys and Compounds, 2017, 699, 775. 13 Sun F, Zhang J Y, Marteleur M, et al. Acta Materialia, 2013, 61(17), 6406. 14 Zhang J Y, Li J S, Chen G F, et al. Materials Characterization, 2018, 139, 421. 15 Sun F, Zhang J Y, Marteleur M, et al. Scripta Materialia, 2015, 94, 17. 16 Abdel-Hady M, Hinoshita K, Morinaga M. Scripta Materialia, 2006, 55(5), 477. 17 Cui Y Y, Li D, Wan X J. Acta Metallurgica Sinica, 1993, 29(2), 13(in Chinese). 崔玉友, 李东, 万晓景. 金属学报, 1993, 29(2), 13. 18 Pang E L, Pickering E J, Baik S I, et al. Acta Materialia, 2018, 153, 62. 19 Abdel-Hady M, Fuwa H, Hinoshita K, et al. Scripta Materialia, 2007, 57(11), 1000. 20 Wu H, Zhao Y Q, Ge P, et al. Rare Metal Materials and Engineering, 2012, 41(5), 805(in Chinese). 吴欢, 赵永庆, 葛鹏, 等.稀有金属材料与工程, 2012, 41(5), 805. 21 Bania P J. Jom, 1994, 46(7), 16. 22 Zhang Z, Wang Q J, Mo W. Metallurgy and heat treatment of titanium, Metallurgical Industry Press, China, 2009(in Chinese). 张翥, 王群骄, 莫畏.钛的金属学和热处理, 冶金工业出版社, 2009. 23 Zhang W F, Huang X, Li X W, et al. Materials Reports, 2005(3), 9(in Chinese). 张旺峰, 黄旭, 李兴无, 等.材料导报, 2005(3), 9. 24 Kolli R P, Joost W J, Ankem S. Jom, 2015, 67(6), 1273. 25 Ge P, Zhao Y Q, Zhou L. Rare Metal Materials and Engineering, 2005,34(5), 790 (in Chinese). 葛鹏, 赵永庆, 周廉.稀有金属材料与工程, 2005,34(5), 790. 26 Hao Y L, Li S J, Sun S Y, et al. Applied Physics Letters, 2005, 87(9), 091906. 27 Wang Q, Dong C, Liaw P K. Metallurgical and Materials Transactions A, 2015, 46(8), 3440. 28 Morinaga M, Yukawa N, Adachi H. Journal of the Physical Society of Japan, 1984, 53(2), 653. 29 Morinaga M, Yukawa N, Ezaki H, et al. Philosophical Magazine A, 1985, 51(2), 247. 30 Decker R F. Steel strengthening mechanisms symposium zurich, Switzerlang, 1969. 31 Morinaga M, Kato M, Kamimura T, et al. Titanium 92: Science and technology, Warrendale, 1993, pp.217-224. 32 Kuroda D, Niinomi M, Morinaga M, et al. Materials Science and Engineering: A, 1998, 243(1-2), 244. 33 Zhang J S, Cui H, Hu Z Q. Materials Science and Engineering, 1993(3), 1 (in Chinese). 张济山, 崔华, 胡壮麒.材料科学与工程, 1993(3),1. 34 Zhang J S, Cui H, Hu Z Q. Acta Metallurgica Sinica, 1993, 29 (7), 5(in Chinese). 张济山, 崔华, 胡壮麒.金属学报, 1993, 29(7), 5. 35 Zhao L C, Cui C X, Liu S J, et al. Rare Metal Materials and Enginee-ring, 2008(1), 108(in Chinese). 赵立臣, 崔春翔, 刘双进, 等.稀有金属材料与工程, 2008 (1), 108. 36 Zhang J Y, Chen G F, Zhang S, et al. Rare Metal Materials and Engineering, 2020, 49(1), 370(in Chinese). 张金勇, 陈冠方, 张帅, 等.稀有金属材料与工程, 2020, 49(1), 370. 37 Ahmed M, Wexler D, Casillas G, et al. Acta Materialia, 2015, 84, 124. 38 Wang C H, Russell A M, Cao G H. Scripta Materialia, 2019, 158, 62. 39 Hickman B S. Journal of Materials Science, 1969, 4(6), 554. 40 Wang H L, Shah S A A, Hao Y L, et al. Journal of Alloys and Compounds, 2017, 700, 155. 41 Chen R, Qin G, Zheng H, et al. Acta Materialia, 2018, 144, 129. 42 Jawed S F, Rabadia C D, Liu Y J, et al. Materials & Design, 2019, 181, 108064. 43 Xu W, Kim K B, Das J, et al. Scripta Materialia, 2006, 54(11), 1943. 44 Yang R, Pan Y, Chen W, et al. Acta Metallurgica Sinica, 2016, 52 (2), 135(in Chinese). 杨蕊, 潘艳, 陈威, 等.金属学报, 2016, 52(2), 135. 45 Richman R. Deformation twinning, Gordon and Breach Science Publi-shers, USA, 1964. 46 Takemoto Y, Hida M, Sakakibara A. Nippon Kinzoku Gakkaishi, 1993, 57(12), 1471. 47 Takemoto Y, Hida M, Sakakibara A. Journal of the Japan Institute of Metals, 1996, 60(11), 1072. 48 Castany P, Yang Y, Bertrand E, et al. Physical Review Letters, 2016, 117(24), 245501. 49 Lai M J, Tasan C C, Raabe D. Acta Materialia, 2016, 111, 173. 50 Kawabata T, Kawasaki S, Izumi O. Acta materialia, 1998, 46(8), 2705. 51 Litvinov V S, Rusakov G M. The Physics of Metals and Metallography, 2000, 90,S96. 52 Tobe H, Kim H Y, Inamura T, et al. Acta Materialia, 2014, 64, 345. 53 Chen B, Sun W, Zhao J, et al. Journal of Materials Engineering, 2017, 45(1), 111(in Chinese). 陈斌, 孙威, 赵颉, 等.材料工程, 2017, 45(1), 111. 54 He T, Feng Y, Luo W Z, et al. Rare Metal Materials and Engineering, 2018, 47(2), 705(in Chinese). 何涛, 冯勇, 罗文忠, 等.稀有金属材料与工程, 2018, 47(2), 705. 55 Lin C, Yu J S, Yin G L, et al. Materials Reports, 2018,31(5), 72(in Chinese). 林成, 于佳石, 尹桂丽, 等.材料导报, 2018, 31(5), 72. 56 Hanada S, Izumi O. Metallurgical Transactions A, 1986, 17(8), 1409. 57 Yang Y, Wu S Q, Li G P, et al. Acta Materialia, 2010, 58(7), 2778. 58 Wu S Q, Ping D H, Yamabe-Mitarai Y, et al. Acta Materialia, 2014, 62, 122. 59 Chen B, Sun W. Journal of Alloys and Compounds, 2018, 766, 123. 60 Lai M J, Tasan C C, Zhang J, et al. Acta Materialia, 2015, 92, 55. 61 Lai M J, Li J S. The Chinese Journal of Nonferrous Metals, 2019(9), 17(in Chinese). 赖敏杰, 李金山.中国有色金属学报, 2019 (9), 17. 62 Gao J, Huang Y, Guan D, et al. Acta Materialia, 2018, 152, 301. 63 Zhang J Y, Li J S, Chen Z, et al. Rare Metal Materials and Enginee-ring, 2018(9), 31(in Chinese). 张金勇, 李金山, 陈正, 等.稀有金属材料与工程, 2018 (9), 31. 64 Min X, Chen X, Emura S, et al. Scripta Materialia, 2013, 69(5), 393. 65 Zhao G H, Xu X, Dye D, et al. Acta Materialia, 2020, 183, 155. 66 Mantri S A, Sun F, Choudhuri D, et al. Scientific reports, 2019, 9(1), 1. 67 Zhang J, Fu Y, Wu Y, et al. Materials Research Letters, 2020, 8(7), 247. 68 Besse M, Castany P, Gloriant T. Acta Materialia, 2011, 59(15), 5982. 69 Wang X L, Li L, Xing H, et al. Scripta Materialia, 2015, 96, 37. 70 Wang H L, Hao Y L, He S Y, et al. Acta Materialia, 2017, 135, 330. 71 Grosdidier T, Philippe M J. Materials Science and Engineering: A, 2000, 291(1-2), 218. 72 Huang C W, Zhao Y Q, Xin S W, et al. Rare Metal Materials and Engineering, 2016, 45(8), 2123(in Chinese). 黄朝文, 赵永庆, 辛社伟, 等.稀有金属材料与工程, 2016, 45(8), 2123. 73 Chen W, Sun Q Y, Xiao L, et al. The Chinese Journal of Nonferrous Metals, 2010, 20(11), 2124(in Chinese). 陈威, 孙巧艳, 肖林, 等.中国有色金属学报, 2010, 20(11), 2124. 74 Ma X, Li F, Cao J, et al. Materials Science and Engineering: A, 2018, 710, 1. 75 Ahmed M, Wexler D, Casillas G, et al. Acta Materialia, 2016, 104, 190. 76 Bertrand E, Castany P, Péron I, et al. Scripta materialia, 2011, 64(12), 1110. 77 Zhou X, Min X. Journal of materials science, 2018, 53(11), 8604. 78 Bhattacharjee A, Bhargava S, Varma V K, et al. Scripta Materialia, 2005, 53(2), 195. 79 Cai M H, Lee C Y, Lee Y K. Scripta Materialia, 2012, 66(8), 606. 80 Ramesh A, Ankem S. Metallurgical and Materials Transactions A, 2002, 33(4), 1137. 81 Wang Y B, Zhao Y H, Lian Q, et al. Scripta Materialia, 2010, 63(6), 613. 82 Neelakantan S, San Martin D, Rivera-Díaz-del-Castillo P E J, et al. Materials Science and Technology, 2009, 25(11), 1351. 83 Grosdidier T, Combres Y, Gautier E, et al. Metallurgical and Materials Transactions A, 2000, 31(4), 1095. 84 Lee S W, Park C H, Hong J K, et al. Journal of Alloys and Compounds, 2020, 813, 152102. 85 Chen W, Cao S, Kou W, et al. Acta Materialia, 2019, 170, 187. 86 Xiao J F, Nie Z H, Ma Z W, et al. Materials Science and Engineering: A, 2020, 772, 138687. 87 Lai M J, Li T, Raabe D. Acta Materialia, 2018, 151, 67. 88 Gao J, Knowles A J, Guan D, et al. Scripta Materialia, 2019, 162, 77. 89 Zhang J Y, Chen G F, Fu Y Y, et al. Journal of Alloys and Compounds, 2019, 799, 389.