CoCrFeNi-M系高熵合金的结构与相变

doi:10.11896/j.issn.1005-023X.2018.01.015

Abstract
Figure/Table
References
Related Citation (15)

Download:

richhtml

Full Text ( PDF ) (819KB)
Export: BibTeX | EndNote (RIS)

Abstract

High-entropy alloys, one of the three breakthroughs of metallic materials field in recent years, dash out the cage of traditional design concept about alloys, and could produce alloy materials with high strength, excellent wear resistance and anti-corrosion in proper proportion. The four elements of Fe, Co, Cr, Ni have been widely applied in the high-entropy alloys systems and gained a number of outstanding achievements. This paper demonstrate the feature of structures and transitions in CoCrFeNi-M high-entropy alloy systems. Furthermore, the effect of alloying elements on as-cast high-entropy alloys are illustrated, the heat treatment processes of high-entropy alloys are discussed. Finally, the current research status and existing problems of high entropy alloys are summarized.

Key words： high-entropy alloys CoCrFeNi microstructure phase transition

Published: 10 January 2018

CLC number:

TG14

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yaxiong GUO
	Qibin LIU
	Xiaojuan SHANG
	Peng XU
	Fang ZHOU

Cite this article:

Yaxiong GUO,Qibin LIU,Xiaojuan SHANG, et al. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122-127.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.01.015 OR http://www.mater-rep.com/EN/Y2018/V32/I1/122

[1]	Yeh J W, Chen S K, Lin S J , et al. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004,6(5):299.
[2]	Tong C J, Chen M R, Yeh J W , et al. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements[J]. Metallurgical and Materials Transactions A, 2005,36(5):1263.
[3]	Tsai M H, Yeh J W . High-entropy alloys: A critical review[J]. Materials Research Letters, 2014,2(3):107.
[4]	Liu L . Effect of alloying elements on microstructure and mechanical properties of high entropy alloys[D]. Changchun: Jilin University, 2012(in Chinese).
[4]	刘亮 . 合金元素对高熵合金组织与性能的影响[D]. 长春:吉林大学, 2012.
[5]	Miracle D B, Senkov O N . A critical review of high entropy alloys and related concepts[J]. Acta Materialia, 2016,122:448.
[6]	Tung C C, Yeh J W, Shun T T , et al. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system[J]. Materials Letters, 2007,61(1):1.
[7]	Lee C P, Chang C C, Chen Y Y , et al. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behavior in aqueous environments[J]. Corrosion Science, 2008,50:2053.
[8]	Wang Y F, Yang H Y . Evolution of microstructure of AlCoCrFeNiTi0.5 high-entropy alloys in the process of solidification[J].Rare Metal Materials and Engineering, 2014(10):2459(in Chinese).
[8]	王毅飞, 杨海彧 . 凝固过程中AlCoCrFeNiTi0.5高熵合金的组织结构演变[J].稀有金属材料与工程, 2014(10):2459.
[9]	Wang X F, Zhang Y, Qiao Y , et al. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys[J]. Intermetallics, 2007,15(3):357.
[10]	Zhang L, , Preparation of high entropy alloys and their structure and properties[D]. Changchun: Jilin University, 2012(in Chinese).
[10]	张力 . 高熵合金的制备及组织与性能[D]. 长春:吉林大学, 2007.
[11]	Dong Y, , Fundamental study on microstructure and mechanical properties in multi-phase Al-Cr-Fe-Ni-M high entropy alloys[D]. Dalian: Dalian University of Technology, 2016(in Chinese).
[11]	董勇 . Al-Cr-Fe-Ni-M系多相高熵合金微观组织与力学性能的基础研究[D]. 大连:大连理工大学, 2016.
[12]	CantorB, Chang I T H, Knight P, et al.Microstructural development in equiatomic multicomponent alloys[J].Materials Science and Engineering A , 2004, 375-377:213.
[13]	VaralakshmiS, Kamaraj M, Murty B S . Synjournal and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying[J]. Journal of Alloys and Compounds, 2008,460(1-2):253.
[14]	SenkovO N, Wilks G B, Scott J M , et al. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys[J]. Intermetallics, 2011,19(5):698.
[15]	YaoH W, Qiao J W, Hawk J A , et al. Mechanical properties of refractory high-entropy alloys: Experiments and modeling[J]. Journal of Alloys and Compounds, 2016,696:1139.
[16]	LuY, Dong Y, Guo S , et al. A promising new class of high-temperature alloys: Eutectic high-entropy alloys[J]. Scientific Reports, 2014,4:6200.
[17]	JiangL. Microstructure evolution and mechanical properties of CoFeNiV(Mo, Nb) high entropy alloys[D]. Dalian: Dalian University of Technology, 2016(in Chinese).
[17]	蒋丽 . CoFeNiV(Mo,Nb)高熵合金的组织演变及力学性能研究[D]. 大连:大连理工大学, 2016.
[18]	LuY, Gao X, Jiang L , et al. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range[J]. Acta Materialia, 2017,124:143.
[19]	LiuJ, Chen C, Xu Y , et al. Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ, TEM study[J]. ScriptaMaterialia, 2017,137:9.
[20]	ZhaoR F, Li H J, Ren B , et al. Microstructure and properties of AlCrMnMoNiZrB0.1 high entropy alloys prepared by powder metallurgy process Special Casting and Nonferrous Alloys, 2013,33(3):288(in Chinese).
[20]	赵瑞锋, 李红菊, 任波 , 等. 粉末冶金制备AlCrMnMoNiZrB0.1合金的组织与性能[J]. 特种铸造及有色合金, 2013,33(3):288.
[21]	ZhangS F, Yang X, Zhang Y . Processing and properties of AlCrCuFeNi single crystal high entropy alloy Acta Metallurgical Sinica, 2013,49(11):1473(in Chinese).
[21]	张素芳, 杨潇, 张勇 , 等. AlCrCuFeNi高熵合金单晶材料的制备及性能[J]. 金属学报, 2013,49(11):1473.
[22]	YaoC Z, Zhang P, Liu M , et al. Electrochemical preparation and magnetic study of Bi-Fe-Co-Ni-Mn high entropy alloy[J]. Electrochimica Acta, 2008,53(28):8359.
[23]	LaiC H, Lin S J, Yeh J W , et al. Preparation and characterization of AlCrTaTiZr multi-element nitride coatings[J]. Surface and Coatings Technology, 2006,201(6):3275.
[24]	FuZ, Chen W, Fang S , et al. Alloying behavior and deformation twinning in a CoNiFeCrAl0.6Ti0.4 high entropy alloy processed by spark plasma sintering[J]. Journal of Alloys and Compounds, 2013,553(3):316.
[25]	NiuX L, Wang L J, Sun D . Research on corrosion resistance of Al-Fe-Co-Cr-Ni-Cu high-entropy alloy coating by electron beam evaporation plating Journal of Dalian University of Technology, 2013,53(5):689(in Chinese).
[25]	牛雪莲, 王立久, 孙丹 , 等. 电子束蒸发沉积Al-Fe-Co-Cr-Ni-Cu高熵合金涂层耐蚀性研究[J]. 大连理工大学学报, 2013,53(5):689.
[26]	MaM X, Liu Y X, Gu Y , et al. Synjournal of AlxCoCrNiMo high entropy alloy coatings by laser cladding Applied Laser, 2010,30(6):433(in Chinese).
[26]	马明星, 柳沅汛, 谷雨 , 等. 激光制备AlxCoCrNiMo高熵合金涂层的研究[J]. 应用激光, 2010,30(6):433.
[27]	HaaseC, Tang F, Wilms M B , et al. Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys—Towards rapid alloy screening and design[J]. Materials Science and Engineering A, 2017,688:180.
[28]	ZhangY, Zuo T T, Tang Z , et al. Microstructures and properties of high-entropy alloys[J]. Progress in Materials Science, 2014,61(8):1.
[29]	TsaiK Y, Tsai M H, Yeh J W . Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys[J]. Acta Materialia, 2013,61(13):4887.
[30]	ShunT T, Hung C H, Lee C F . The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700 ℃[J]. Journal of Alloys and Compounds, 2010,495(1):55.
[31]	WuY D, Cai Y H, Chen X H , et al. Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys[J]. Materials and Design, 2015,83:651.
[32]	QiuX W, Zhang Y P, He L , et al. Microstructure and corrosion resistance of AlCrFeCuCo high entropy alloy[J]. Journal of Alloys and Compounds, 2013,549(2):195.
[33]	MaD, Yao M, Pradeep K G , et al. Phase stability of non-equiatomicCoCrFeMnNi high entropy alloys[J]. Acta Materialia, 2015,98:288.
[34]	TakeuchiA, Amiya K, Wada T , et al. Dual HCP structures formed in senaryScYLaTiZrHf multi-principal-element alloy[J]. Inter-metallics, 2016,69:103.
[35]	ZhaoY J, Qiao J W, Ma S G , et al. A hexagonal close-packed high-entropy alloy:The effect of entropy[J]. Materials and Design, 2016,96:10.
[36]	FuZ, Chen W, Wen H , et al. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy[J]. Acta Materialia, 2016,107:59.
[37]	TongC J, Chen Y L, Yeh J W , et al. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements[J]. Metallurgical and Materials Transactions A, 2005,36(4):881.
[38]	YuP F, Cheng H, Zhang L J , et al. Nanotwin’s formation and growth in an AlCoCuFeNi high-entropy alloy[J]. ScriptaMaterialia, 2016,114:31.
[39]	GuoS, Ng C, Lu J , et al. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys[J]. Journal of Applied Physics, 2011,109(10):645.
[40]	RenM X, Li B S , Phase analysis of CrFeCoNiCu high entropy alloy[J].Materials Engineering, 2012(1):9(in Chinese).
[40]	任明星, 李邦盛 . CrFeCoNiCu多主元高熵合金的相分析[J]. 材料工程, 2012(1):9.
[41]	41张勇 . 非晶和高熵合金[M]. 北京: 科学出版社, 2010.
[42]	WangW R, Wang W L, Yeh J W . Phases, microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys at elevated temperatures[J]. Journal of Alloys and Compounds, 2014,589(9):143.
[43]	MaS G, Zhang Y . Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy[J]. Materials Science and Engineering A, 2012,532(1):480.
[44]	StepanovN D, Yurchenko N Y, Tikhonovsky M A , et al. Effect of carbon content and annealing on structure and hardness of the CoCrFeNiMn-based high entropy alloys[J]. Journal of Alloys and Compounds, 2016,687:59.
[45]	LiuJ D . Microstructure and mechanism of in-situ synthesis of reinforcing phase in TiC/AlCrFeNi-M high-entropy alloy based composites[D]. Harbin:Harbin Institute of Technology, 2012(in Chinese).
[45]	刘俊东 . TiC/AlCrFeNi-M系高熵合金基复合材料显微组织及原位自生机理研究[D]. 哈尔滨:哈尔滨工业大学, 2012.
[46]	LiA M, Zhang X Y, Liu L L , et al. Effect of annealing on microstructure and properties of AlCrFeCoNiCu high-entropy alloy Materials for Mechanical Engineering, 2012,36(7):14(in Chinese).
[46]	李安敏, 张喜燕, 刘乐林 , 等. 退火对AlCrFeCoNiCu高熵合金组织与性能的影响[J]. 机械工程材料, 2012,36(7):14.
[47]	LiW, Liu G Z, Guo J J . Microstructure and electrochemical properties of AlFeCuCoNiCrTix high entropy alloys Special Casting and Nonferrous Alloys, 2009,29(10):941(in Chinese).
[47]	李伟, 刘贵仲, 郭景杰 . AlFeCuCoNiCrTix高熵合金的组织结构及电化学性能[J]. 特种铸造及有色合金, 2009,29(10):941.
[48]	PickeringE J, Mu?oz-Moreno R, Stone H J , et al. Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi[J]. ScriptaMaterialia, 2016,113:106.
[49]	PickeringE J, Stone H J, Jones N G . Fine-scale precipitation in the high-entropy alloy Al0.5CrFeCoNiCu[J]. Materials Science and Engineering A, 2015,645:65.
[50]	WengZ Q, Dong G, Zhang Q L , et al. Effect of annealing on microstructure and properties of FeCrNiCoMn high-entropy alloy coating prepared by Laser cladding Chinese Journal of Laser, 2014,41(3):59(in Chinese).
[50]	翁子清, 董刚, 张群莉 , 等. 退火对激光熔覆FeCrNiCoMn高熵合金涂层组织与性能的影响[J]. 中国激光, 2014,41(3):59.
[51]	ZhangH, Pan Y, He Y Z . Laser cladding FeCoNiCrAl2Si high-entropy alloy coating Acta Metallurgical Sinica, 2011,47(8):1075(in Chinese).
[51]	张晖, 潘冶, 何宜柱 . 激光熔覆FeCoNiCrAl2Si高熵合金涂层[J]. 金属学报, 2011,47(8):1075.
[52]	AnXulong, Liu Qibin, Zheng Bo . Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating Infrared and Laser Engineering, 2014,43(4):1140.
[52]	安旭龙, 刘其斌, 郑波 . 激光熔覆制备高熵合金MoFeCrTiWAlxSiy涂层的组织与性能[J]. 红外与激光工程, 2014,43(4):1140.
[53]	Zhouu Fang, Liu Qibin, Zheng Bo . Effect of silicon and aluminum on microstructure and properties of laser cladding MoFeCrTiW high-entropy alloy coating High Power Laser and Particle Beams, 2015,27(11):266.
[53]	周芳, 刘其斌, 郑波 . Si,Al对激光熔覆MoFeCrTiW高熵合金涂层组织性能的影响[J]. 强激光与粒子束, 2015,27(11):266.