激光选区熔化增材制造吸收率的研究进展

doi:10.11896/cldb.22040104

材料导报

2023, Vol. 37

Issue (24): 22040104-10 https://doi.org/10.11896/cldb.22040104

金属与金属基复合材料

激光选区熔化增材制造吸收率的研究进展

李舒玥¹, 傅广^1,2,3,*, 李泓历¹, 彭庆国¹, 肖华强¹, 张钧星², 张泽华¹

1 贵州大学机械工程学院,贵阳 550025
2 贵州大学省部共建公共大数据国家实验室,贵阳 550025
3 贵州省“互联网+”协同智能制造重点实验室,贵阳 550025

Research Progress on Absorptivity of Selective Laser Melting Additive Manufacturing

LI Shuyue¹, FU Guang^1,2,3,*, LI Hongli¹, PENG Qingguo¹, XIAO Huaqiang¹, ZHANG Junxing², ZHANG Zehua¹

1 College of Mechanical Engineering, Guizhou University, Guiyang 550025, China
2 State Key Laboratory of Public Big Data, Guizhou University, Guiyang 550025, China
3 ‘Internet Plus’ Key Laboratory of Collaborative Intelligent Manufacturing, Guizhou Province, Guiyang 550025, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 39242KB )
输出: BibTeX | EndNote (RIS)

摘要在研究激光选区熔化增材制造过程中材料吸收率是一个具有科学和实际意义的问题,它不仅是工艺过程精确性仿真的前提条件,而且为所选用的金属粉末材料定义一组工艺条件,使其更适合于激光选区熔化成形。本文首先介绍了激光与粉末床相互作用机理,然后总结了激光选区熔化过程中吸收率的常用测量方法,并在此基础上综述了国内外学者运用不同方法研究吸收率的进展和比较分析了各种方法的特点及测量时的注意事项。此外,重点对可能影响吸收率的因素进行了详细分类和阐述。最后就当前的研究进展及所面临的主要问题进行归纳总结,对未来吸收率的研究进行了展望。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李舒玥
	傅广
	李泓历
	彭庆国
	肖华强
	张钧星
	张泽华

关键词: 增材制造激光选区熔化吸收率实验检测数值模拟

Abstract: Material absorptivity in selective laser melting additive manufacturing is a problem with scientific and practical significance. Its study is a prerequisite for simulating process accuracy and defining a set of process conditions for the selected metal powder material to make it more suitable for selective laser melting and forming. This paper introduces the interaction mechanism between the laser and powder bed. It summari-ses widely used measurement methods of absorptivity in selective laser melting and reviews the progress of different methods in absorptivity research. The characteristics of various methods and their applications are comparatively analysed, focusing on the detailed discussion of the factors that may influence absorptivity. The paper concludes with a summary of the current research progress, significant problems, and an outlook on absorptivity research.

Key words: additive manufacturing selective laser melting absorptivity experimental detection numerical simulation

发布日期: 2023-12-19

ZTFLH:

TN249

基金资助: 国家自然科学基金(52065009);贵州省科技计划项目(黔科合基础-ZK[2021]一般268);国家重点研发计划(2020YFB1713300)

通讯作者: *傅广,贵州大学机械工程学院副教授、硕士研究生导师。2008年合肥学院材料成型及控制工程专业本科毕业,2013年重庆大学机械工程硕博连读,2015获国家留学基金委“国家公派奖学金”赴英国Exeter大学博士联合培养,2019年重庆大学机械工程专业博士毕业后到贵州大学工作至今。目前主要从事金属增材制造材料表征、工艺机理等方面的研究工作。申请专利10余项,发表论文10余篇,包括Materials & Design、Journal of Alloys and Compounds、International Journal of Mechanical Sciences、Materials Science and Engineering A等。edison_fu@163.com

作者简介: 李舒玥,2020年6月于南华大学获得工学学士学位。现为贵州大学机械工程学院硕士研究生,在傅广副教授的指导下进行研究。目前主要研究领域为增材制造。

引用本文:

李舒玥, 傅广, 李泓历, 彭庆国, 肖华强, 张钧星, 张泽华. 激光选区熔化增材制造吸收率的研究进展[J]. 材料导报, 2023, 37(24): 22040104-10.
LI Shuyue, FU Guang, LI Hongli, PENG Qingguo, XIAO Huaqiang, ZHANG Junxing, ZHANG Zehua. Research Progress on Absorptivity of Selective Laser Melting Additive Manufacturing. Materials Reports, 2023, 37(24): 22040104-10.

链接本文:

http://www.mater-rep.com/CN/10.11896/cldb.22040104 或 http://www.mater-rep.com/CN/Y2023/V37/I24/22040104

1 Abdulhameed O, Al-Ahmari A, Ameen W, et al. Advances in Mechanical Engineering, 2019, 11(2),754322720.
2 Dilberoglu U M, Gharehpapagh B, Yaman U, et al. Procedia Manufacturing, 2017, 11,545.
3 Gu D D, Dai D H, Xia M J, et al. Journal of Nanjing University of Aeronautics & Astronautics, 2017, 49(5),645(in Chinese).
顾冬冬,戴冬华,夏木建, 等. 南京航空航天大学学报, 2017, 49(5),645.
4 Liang M, Li Z H, Liu M H, et al. Materials Reports, 2023 (14),1 (in Chinese).
梁梦,黎振华,刘美红, 等. 材料导报, 2023(14),1.
5 Peng L, Zheng Z J. Materials Reports, 2023 (8),1(in Chinese).
彭乐,郑志军. 材料导报, 2023 (8),1.
6 Fereiduni E, Ghasemi A, Elbestawi M. Aerospace, 2020, 7(6),77.
7 Wang D, Wang Y, Yang Y, et al. Journal of Materials Processing Technology, 2019, 273,116227.
8 Attarilar S, Ebrahimi M, Djavanroodi F, et al. International Journal of Bioprinting, 2021, 7(1), 203.
9 Tian J, Huang Z H, Qi W J, et al. Materials Reports, 2017, 31(S1),90 (in Chinese).
田杰,黄正华,戚文军, 等. 材料导报, 2017, 31(S1),90.
10 Sing S L, Yeong W Y, Wiria F E, et al. Rapid Prototyping Journal, 2017, 23, 611.
11 Lupone F, Padovano E, Casamento F, et al. Materials, 2021, 15(1),183.
12 Zhao D C, Lin F. China Mechanical Engineering, 2018, 29(17),2100 (in Chinese).
赵德陈,林峰. 中国机械工程, 2018, 29(17),2100.
13 Santecchia E, Spigarelli S, Cabibbo M. Metals, 2020, 10(3),341.
14 Trapp J, Rubenchik A M, Guss G, et al. Applied Materials Today, 2017, 9,341.
15 Boley C D, Khairallah S A, Rubenchik A M. Applied Optics, 2015, 54(9),2477.
16 Karlsson B, Ribbing C G. Journal of Applied Physics, 1982, 53(9),6340.
17 Dausinger F, Shen J. ISIJ International, 1993, 33(9),925.
18 Bergström D, Powell J, Kaplan A. Journal of Applied Physics, 2008, 103(10),103515.
19 Reddy P, Patel V, Yadav A, et al. IOP Conference Series:Materials Science and Engineering, 2018, 310,12092.
20 Le K Q, Tang C, Wong C H. International Journal of Thermal Sciences, 2019, 145,105992.
21 Bayat M, Thanki A, Mohanty S, et al. Additive Manufacturing, 2019, 30,100835.
22 Tang C, Le K Q, Wong C H. International Journal of Heat and Mass Transfer, 2020, 149,119172.
23 Zhu Y, Zou J, Yang H. Journal of Zhejiang University-Science A, 2018, 19(2),95.
24 Cao L C, Zhou Q, Han Y F, et al. Acta Aeronautica et Astronautica Sinica, 2021, 42(10),199 (in Chinese).
曹龙超,周奇,韩远飞, 等. 航空学报, 2021, 42(10),199.
25 Song C H, Weng C W, Yang Y Q, et al. Mechanical & Electrical Engineering Technology, 2017, 46(10),1 (in Chinese).
宋长辉,翁昌威,杨永强, 等. 机电工程技术, 2017, 46(10),1.
26 Li Y, Založnik M, Zollinger J, et al. Journal of Materials Processing Technology, 2021, 289,116930.
27 Martukanitz R P, Melnychuk R M, Stefanski M S, et al. In: International Congress on Applications of Lasers & Electro-Optics. America, 2004, pp. 1404
28 Fischer P, Romano V, Weber H, et al. Acta Materialia, 2003, 51(6),1651.
29 Chen J, Zhang Q L, Yao J H, et al. Journal of Applied Optics, 2008 (5),793(in Chinese).
陈君,张群莉,姚建华, 等. 应用光学, 2008 (5),793.
30 Haag M, Hügel H, Albright C E, et al. Journal of Applied Physics, 1996, 79(8),3835.
31 Youn S J, Rho T H, Min B I, et al. Physica Status Solidi (b), 2007, 244(4),1354.
32 Dorney T D, Baraniuk R G, Mittleman D M. Journal of the Optical Society of America A Optics Image Science & Vision, 2001, 18(7), 1562.
33 Tolochko N K, Khlopkov Y V, Mozzharov S E, et al. Rapid Prototyping Journal, 2000, 6(3), 155.
34 Rubenchik A, Wu S, Mitchell S, et al. Applied Optics, 2015, 54(24),7230.
35 Simonds B J, Garboczi E J, Palmer T A, et al. Physical Review Applied, 2020, 13(2),24057.
36 Van Gestel C. Study of physical phenomena of selective laser melting towards increased productivity. Ph. D. Thesis, École Polytechnique Fédérale de Lausanne, Switzerland, 2015.
37 Simonds B J, Sowards J, Hadler J, et al. Physical Review Applied, 2018, 10(4),44061.
38 Li J W, Chen H Y, Zhang L M, et al. Acta Optica Sinica, 2021, 41(20),92(in Chinese).
李佳伟,陈洪耀,张黎明, 等. 光学学报, 2021, 41(20),92.
39 Tolochko N K, Arshinov M K, Gusarov A V, et al. Rapid Prototyping Journal, 2003, 9(5),314.
40 Mcvey R W, Melnychuk R M, Todd J A, et al. Journal of Laser Applications, 2007, 19(4),214.
41 Wallace N J, Jones M R, Crane N B. In: Proceedings of the Utah NASA Space Grant Consortium. USA, 2020.
42 Fabbro R, Slimani S, Coste F, et al. Journal of Physics D: Applied Phy-sics, 2005, 38(12),1881.
43 Norris J T, Robino C V. In: 27th International Congress on Laser Mate-rials Processing, Laser Microprocessing and Nanomanufacturing. California, 2008, pp. 149.
44 Simonds B J, Sowards J, Hadler J, et al. Physical Review Applied, 2018, 10(4),44061.
45 Allen T R, Huang W, Tanner J R, et al. Physical Review Applied, 2020, 13(6),64070.
46 Tang C, Meyer M, Darby B L, et al. Applied Optics, 2018, 57(7),1581.
47 Yu X, Li Z G, Liu J X, et al. Acta Optica Sinica, 2021, 41(16),1612002 (in Chinese).
于欣,李振钢,刘家祥, 等. 光学学报, 2021, 41(16),1612002.
48 Tang S Q, Zhu Z F. Metrological Technology, 2005(12),30(in Chinese).
汤顺青,朱正芳. 计量技术, 2005(12),30.
49 Matthews M, Trapp J, Guss G, et al. Journal of Laser Applications, 2018, 30(3),32302.
50 Boley C D, Mitchell S C, Rubenchik A M, et al. Applied Optics, 2016, 55(23),6496.
51 Ye J, Khairallah S A, Rubenchik A M, et al. Advanced Engineering Materials, 2019, 21(7),1900185.
52 Silva E, Monteiro W A, Rossi W, et al. Journal of Materials Science Letters, 2000.
53 Wirth F, Eisenbarth D, Wegener K. Physics Procedia, 2016, 83,1424.
54 Rubenchik A M, Wu S S, Kanz V K, et al. Optical Engineering, 2014, 53(12),122506.
55 Lia F, Park J, Tressler J, et al. Additive Manufacturing, 2017, 18,31.
56 Fuerschbach P W, Maccallum D O. Office of Scientific & Technical Information Technical Reports, 1995.
57 Willamowski U, Ristau D, Welsch E. Applied Optics, 1998, 37(36),8362.
58 Gusarov A V, Kruth J. International Journal of Heat and Mass Transfer, 2005, 48(16),3423.
59 Chen Q, Guillemot G, Gandin C, et al. Additive Manufacturing, 2017, 16,124.
60 Khairallah S A, Anderson A T, Rubenchik A, et al. Acta Materialia, 2016, 108,36.
61 Soundararajan B, Sofia D, Barletta D, et al. Additive Manufacturing, 2021, 47,102336.
62 Ren Z, Zhang D Z, Fu G, et al. Materials & Design, 2021, 207,109857.
63 Laoui T, Wang X, Childs T, et al. International Journal of Engineering Simulation, 2000.
64 Laoui T, Wang X, Kruth J, et al. Revue Internationale de CFAO et d’informatique Graphique, 2000, 15(2-4),185.
65 Wang X C, Laoui T, Bonse J, et al. The International Journal of Advanced Manufacturing Technology, 2002, 19(5),351.
66 Osmanlic F, Wudy K, Laumer T, et al. Polymers, 2018, 10(7),784.
67 Streek A, Regenfuss P, Exner H. Physics Procedia, 2013, 41,858.
68 Boley C D, Rubenchik A M. Applied Optics, 2013, 52(14),3329.
69 Yang Y, Gu D, Dai D, et al. Materials & Design, 2018, 143,12.
70 Liu B, Fang G, Lei L, et al. Applied Mathematical Modelling, 2020, 79,506.
71 Kouraytem N, Li X, Cunningham R, et al. Physical Review Applied, 2019, 11(6),64054.
72 Cho J, Na S. Journal of Physics D: Applied Physics, 2006, 39(24),5372.
73 Ahn J, Na S. Applied Surface Science, 2013, 283,115.
74 Gu D, Yang Y, Xi L, et al. Optics & Laser Technology, 2019, 119,105600.
75 Ge Q, Gu D, Dai D, et al. Journal of Physics D: Applied Physics, 2021, 54(11),115103.
76 Gong H, Dilip J J S, Yang L, et al. In: IOP Conference Series: Materials Science and Engineering. Atlanta, 2017, pp. 012024.
77 Markl M, Körner C. Annual Review of Materials Research, 2016, 46(1),93.
78 Indhu R, Vivek V, Sarathkumar L, et al. Lasers in Manufacturing and Materials Processing, 2018, 5(4),458.
79 Körner C, Attar E, Heinl P. Journal of Materials Processing Technology, 2011, 211(6),978.
80 Ji Z, Han Q. The International Journal of Advanced Manufacturing Technology, 2020, 110(11),2955.
81 Vorndran E, Moseke C, Gbureck U. MRS Bulletin, 2015, 40(2),127.
82 Yang Y, Gu D, Dai D, et al. Materials & Design, 2018, 143,12.
83 Zhang J, Gu D, Yang Y, et al. Engineering, 2019, 5(4),736.
84 Furumoto T. International Journal of the Japan Society for Precision Engineering, 2007, 73(5),558.
85 Coe H G, Pasebani S. Journal of Manufacturing and Materials Proces-sing, 2020, 4(1), 8.
86 Gu D, Yang Y, Xi L, et al. Optics & Laser Technology, 2019, 119,105600.
87 Huang Y L, Yang F H, Liang G Y, et al. Chinese Journal of Lasers, 2003, 30(5),449 (in Chinese).
黄延禄,杨福华,梁工英, 等. 中国激光, 2003, 30(5),449.
88 Mei L, Chen G, Zhang B, et al. Optics & Laser Technology, 2009, 41(6),770.
89 Xiao B, Zhang Y. International Journal of Heat and Mass Transfer, 2007, 50(11-12),2161.
90 Osmanlic F, Wudy K, Laumer T, et al. Polymers, 2018, 10(7),784.
91 Niu C, Zhu T, Lv Y. International Journal of Photoenergy, 2019, 2019,1476217.
92 Wang J, Weng C, Chang J, et al. Journal of Applied Physics, 2000, 87(7),3245.
93 Nath A K, Sridhar R, Ganesh P, et al. Sadhana, 2002, 27(3),383.
94 Ursu I, Apostol I, Craciun D, et al. Journal of Physics D: Applied Phy-sics, 1984, 17(4),709.
95 Leung C L A, Marussi S, Towrie M, et al. Acta Materialia, 2019, 166,294.
96 Bloehs W, Grünenwald B, Dausinger F, et al. Journal of Laser Applications, 1996, 8(2),65.
97 Bergström D, Powell J, Kaplan A. Journal of Applied Physics, 2008, 103(10),103515.
98 Matsuyama H, Sakamoto H, Shibata K. Transactions of the Japan Society of Mechanical Engineers, 1993, 59(559),876.
99 Walters C T, Barnes R H, Beverly I R E. Journal of Applied Physics, 1978, 49(5),2937.
100 Bloembergen N. Applied Optics, 1973, 12(4),661.
101 Vorobyev A Y, Guo C. Applied Physics A, 2007, 86(3),321.
102 Yan T Q, Chen B Q, Tang P J, et al. Chinese Journal of Lasers, 2021, 48(10),1002106 (in Chinese).
闫泰起,陈冰清,唐鹏钧, 等. 中国激光, 2021, 48(10),1002106.
103 de Souza A F, Al-Rubaie K S, Marques S, et al. Materials Science and Engineering A, 2019, 767,138425.
104 Gusarov A V, Smurov I. Physics Procedia, 2010, 5,381.
105 Körner C, Bauereiß A, Attar E. Modelling and Simulation in Materials Science and Engineering, 2013, 21(8),85011.
106 Hu X L, Wang Z L, Wang M Y, et al. Applied Laser,2022, 42(1),21 (in Chinese).
胡雪兰,王智隆,王梦媛, 等. 应用激光, 2022, 42(1),21.
107 Wang D, Yu C, Zhou X, et al. Applied Sciences, 2017, 7(4),430.
108 Yang S P, Zhang A F, Liang S R, et al. Aeronautical Manufacturing Technology, 2017(17),97 (in Chinese).
严深平,张安峰,梁少端, 等. 航空制造技术, 2017(17),97.
109 King W E, Barth H D, Castillo V M, et al. Journal of Materials Processing Technology, 2014, 214(12),2915.
110 Bertoli U S, Wolfer A J, Matthews M J, et al. Materials & Design, 2017, 113,331.
111 Eagar T W, Tsai N S. Welding Journal, 1983, 62(12),346.
112 Aboulkhair N T, Maskery I, Tuck C, et al. Journal of Materials Processing Technology, 2016, 230,88.
113 Ren Z H, Zhang Z W, Ma X Y, et al. Chinese Journal of Lasers, 2022, 49(14),1402203 (in Chinese).
任治好,张正文,马翔宇, 等. 中国激光, 2022, 49(14),1402203.
114 Qi T, Zhu H, Zhang H, et al. Materials & Design, 2017, 135,257.
115 Tang C, Tan J L, Wong C H. International Journal of Heat and Mass Transfer, 2018, 126,957.
116 Le K Q, Tang C, Wong C H. International Journal of Thermal Sciences, 2019, 145,105992.
117 Allen T R, Huang W, Tanner J R, et al. Physical Review Applied, 2020, 13(6),64070.
118 Simonds B J, Tanner J, Artusio-Glimpse A, et al. Applied Materials Today, 2021, 23,101049.
119 Kim H, Nam K, Kim Y, et al. Journal of Manufacturing Processes, 2022, 80,75.
120 Boyden S B, Zhang Y. Journal of Thermophysics and Heat transfer, 2006, 20(1),9.
121 Brandau B, Da Silva A, Wilsnack C, et al. Materials & Design, 2022, 216,110591.
122 Nordet G, Gorny C, Mayi Y, et al. Optics & Laser Technology, 2022, 147,107612.
123 Díaz D, Molina A, Hahn D. Spectrochimica Acta Part B: Atomic Spectroscopy, 2018, 145,86.
124 Moser D, Pannala S, Murthy J. JOM, 2015, 67(5),1194.
125 Sun D, Tong Y G, He X N. Hot Working Technology, 2010, 39(19),165 (in Chinese).
孙岱,童彦刚,贺晓娜. 热加工工艺, 2010, 39(19),165.
126 Zhang Z, Modest M F. Journal of Heat Transfer, 1998, 120(2),322.
127 Sainte-Catherine C, Jeandin M, Kechemair D, et al. Le Journal de Physique IV, 1991, 1(C7),C7.
128 Heeling T, Wegener K. Additive Manufacturing, 2018, 22,334.
129 Qian Q D, Wang Q T, Qian H Y. In: Proceedings of the 28th National Conference on Structrual Engineering. Nanchang, China, 2019, pp. 459 (in Chinese).
钱秋冬,汪庆桃,钱浩勇. 第28届全国结构工程学术会议. 南昌, 2019, pp. 459.

[1]	李欢, 刘千喜, 曹彪, 张长鑫, 钱利勤, 周亢. 铝/铜超声波焊接与连接的研究进展[J]. 材料导报, 2023, 37(S1): 23040197-11.
[2]	姜琴, 刁珂龙, 杨谋存, 朱跃钊. 纳米流体中温热稳定性研究进展[J]. 材料导报, 2023, 37(S1): 23040330-10.
[3]	彭乐, 郑志军. 激光选区熔化成形金属件的缺陷类型及表征方法概述[J]. 材料导报, 2023, 37(8): 21050053-7.
[4]	朱雪伟, 王海斗, 刘明, 朴钟宇. 等离子熔覆数值模拟研究现状[J]. 材料导报, 2023, 37(7): 21040228-9.
[5]	王群, 李晨宇, 周忠华, 曹文, 周子吉, 孙慧慧, 黄悦, 沈志奇. 化学钢化前后玻璃表面裂纹扩展的实验比较与数值模拟[J]. 材料导报, 2023, 37(5): 21050255-5.
[6]	李丹, 王启伟, 韩国峰, 张保国, 朱胜, 李卫. 横向交变磁场对铝合金电弧增材成形组织与性能的影响[J]. 材料导报, 2023, 37(4): 21050158-6.
[7]	耿汝伟, 程延海, 杜军, 魏正英. 2319铝合金电弧增材制造温度场与应力演变研究[J]. 材料导报, 2023, 37(23): 22060214-8.
[8]	方静, 祁文军, 胡国玉. 8 mm中厚板TC4钛合金TIG焊数值模拟及实验研究[J]. 材料导报, 2023, 37(22): 22030018-6.
[9]	王利卿, 凌子涵, 赵占勇, 张震, 白培康. 增材制造Ti-6Al-4V合金晶粒形貌调控研究进展[J]. 材料导报, 2023, 37(22): 22030266-7.
[10]	吴嘉伦, 夏敏, 王军峰, 葛昌纯. 电极感应熔炼气雾化法制备粉末冶金增材制造原材料金属粉末的研究综述[J]. 材料导报, 2023, 37(21): 22040132-8.
[11]	刘婷, 朱宇, 胡晓, 张松. 超声增材制造在航空航天领域的应用进展[J]. 材料导报, 2023, 37(2): 21040295-8.
[12]	易家俊, 左晓宝, 黎亮, 邹欲晓. 水泥水化过程的概率模型及其微结构演变的数值模拟[J]. 材料导报, 2023, 37(18): 22040014-7.
[13]	罗晓宇, 冯曰海, 赵鑫, 刘思余. 镁合金摆动多道增材层成形特征参数与尺寸控制规律研究[J]. 材料导报, 2023, 37(18): 22040093-7.
[14]	聂文, 许长炜, 彭慧天, 张少波. 矿井新型增润促凝喷雾降尘剂的研制与抑尘性能研究[J]. 材料导报, 2023, 37(15): 22030228-9.
[15]	黄健康, 吴昊盛, 于晓全, 刘光银, 余淑荣. 钛合金电弧增材制造工艺及微观组织调控的研究现状[J]. 材料导报, 2023, 37(14): 21100070-6.

[1]	Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO₂/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2]	Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3]	Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4]	Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5]	Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6]	Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7]	Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8]	Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9]	Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10]	Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .

Viewed

Full text

Abstract

Cited

Shared

Discussed