Please wait a minute...
材料导报  2019, Vol. 33 Issue (18): 3170-3174    https://doi.org/10.11896/cldb.19040022
  第20届全国高技术陶瓷学术年会 |
Al2O3-SiO2复合气凝胶的制备与表征
李华鑫, 陈俊勇, 乐弦, 向军辉
中国科学院大学材料科学与光电技术学院,北京 101400
Preparation and Characterization of Al2O3-SiO2 Composite Aerogels
LI Huaxin, CHEN Junyong, YUE Xian, XIANG Junhui
College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 101400
下载:  全 文 ( PDF ) ( 2892KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本实验以六水合氯化铝(AlCl3·6H2O)和正硅酸四乙酯(TEOS)为前驱体,采用溶胶-凝胶法,通过真空冷冻干燥制备Al2O3-SiO2复合气凝胶。采用扫描电子显微镜(SEM)、傅里叶红外光谱(FTIR)仪、X射线衍射(XRD)仪、透射电子显微镜(TEM)等手段分析了Si含量对气凝胶的微观形貌、结构等性能的影响。傅里叶红外光谱分析表明,在单组分Al2O3气凝胶中引入硅后,Al-OH结构部分吸收峰消失,出现大量的Al-O-Si结构;当铝与硅物质的量为4:1时,复合气凝胶经过1 000 ℃高温热处理后,其比表面积仍高达253 m2/g;经过1 200 ℃高温热处理并保温2 h后,XRD图表明出现大量莫来石相衍射峰,未出现α-Al2O3相,引入-Si基团可以抑制Al2O3的晶型转变,显著提高气凝胶的高温热稳定性。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
李华鑫
陈俊勇
乐弦
向军辉
关键词:  Al2O3-SiO2  复合气凝胶  真空冷冻干燥  热稳定性    
Abstract: In this paper, Al2O3-SiO2 composite aerogels were prepared by vacuum freeze-drying method using hexahydrate aluminum chloride (AlCl3·6H2O) and tetraethyl orthosilicate (TEOS) as precursors. Scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) were used to analyze the effects of Si content on the micromorphology structure and other properties of aerogels. FTIR analysis showed that after the introduction of silicon into the Al2O3 aerogels, the partial absorption peak of Al-OH structure disappeared and a large number of Al-O-Si structures appeared. When the ratio of Al to Si is 4:1, the specific surface area of the composite aerogel is still as high as 253 m2/g after 1 000 ℃ high temperature heat treatment. After heat treatment at 1 200 ℃ for 2 h, the XRD diagram showed that a large number of mullite phase diffraction peaks and no α-Al2O3 phase appear. The introduction of -Si group can inhibit the crystal transformation of Al2O3 and greatly improve the thermal stability of aerogels at high temperature.
Key words:  Al2O3-SiO2    composite aerogels    vacuum freeze-drying    thermal stability
               出版日期:  2019-09-25      发布日期:  2019-07-31
ZTFLH:  TB34  
通讯作者:  xiangjh@ucas.ac.cn   
作者简介:  李华鑫,2017年6月毕业于河南理工大学,获得工学学士学位。现为中国科学院大学材料科学与光电技术学院硕士研究生,在向军辉教授的指导下进行研究。目前主要研究领域为功能材料。
向军辉,中国科学院大学,教授。2002年2月毕业于清华大学材料科学与工程系,获得博士学位。2005年加入中国科学院大学工作至今,主要从事纳米功能材料领域的研究,重点研究超轻纳米材料的制备、表征及应用研究。在国内外重要期刊发表论文30余篇。
引用本文:    
李华鑫, 陈俊勇, 乐弦, 向军辉. Al2O3-SiO2复合气凝胶的制备与表征[J]. 材料导报, 2019, 33(18): 3170-3174.
LI Huaxin, CHEN Junyong, YUE Xian, XIANG Junhui. Preparation and Characterization of Al2O3-SiO2 Composite Aerogels. Materials Reports, 2019, 33(18): 3170-3174.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.19040022  或          http://www.mater-rep.com/CN/Y2019/V33/I18/3170
[1] Kistler S S. Nature, 1931, 127, 741.
[2] Wang X B, Luan Z Q, Li K et al. Materials Review A: Review Papers, 2018, 32(7), 2214(in Chinese).王馨博, 栾志强, 李凯, 等. 材料导报:综述篇, 2018, 32(7), 2214.
[3] Yoldas B E. American Ceramic Society Bulletin, 1975, 54(3), 289.
[4] Poco J F, Satcher J H, Hrubesh L W. Journal of Non-Crystalline Solids, 2001, 285(1-3), 57.
[5] Mizushima Y, Hori M. Journal of Materials Research, 1993, 8(11), 2992.
[6] Wen P G, Chao X Y, Yuan W H, et al. Materials Review A: Review Papers, 2016, 30(8), 51(in Chinese).温培刚, 巢雄宇, 袁武华, 等. 材料导报:综述篇, 2016, 30(8), 51.
[7] Alphonse P, Faure B. Microporous & Mesoporous Materials, 2014, 196, 191.
[8] Ponthieu E, Grimblot J, Elaloui E, et al. Journal of Materials Chemistry, 1999, 3(3), 287.
[9] Laudise R A, Johnson D W. Journal of Non-Crystalline Solids, 1986, 79(1), 155.
[10] Hüsing N, Schubert U. Angewandte Chemie International Edition, 1998, 37(1-2), 22.
[11] Abdelwahe W, Degobert G, Stainmesse S, et al. Advanced Drug Delivery Reviews, 2006, 58(15), 1688.
[12] Yang M M, Zhao N F, Cui Y, et al. ACS Nano, 2017, 11(7), 6817.
[13] Wu X D, Shao G F, Cui S, et al. Ceramics International, 2016, 42(1), 874.
[14] Baumann T F, Gash A E, Chinn S C, et al. Chemistry of Materials, 2004, 17(2), 395.
[15] Leventis N, Sotiriou-Leventis C, Zhang G H, et al. Nano Letters, 2002, 2(9), 957.
[16] Janosovits U, Ziegler G, Scharf U, et al. Journal of Non-Crystalline So-lids, 1997, 210(1), 1.
[17] Yang J F, Wang Q H, Wang T M, et al. Journal of Porous Materials, 2016, 24(4), 1.
[18] Zu G Q, Shen J, Wei X Q, et al. Journal of Non-Crystalline Solids, 2011, 357(15), 2903.
[19] Cao F C, Ren L L, Li X A. RSC Advances, 2015, 5(23), 18025.
[1] 谢鹏飞, 陈勰, 丁峰, 张乃文, 李建波, 任杰. 缩聚法制备热固性聚乳酸及其力学性能和热稳定性研究[J]. 材料导报, 2019, 33(6): 1042-1046.
[2] 王子博, 刘满平, 姜奎, 秦希, 章勇, 王圣楠, 陈健. 退火时间对高压扭转Al-1.0Mg铝合金组织及性能的影响[J]. 材料导报, 2019, 33(2): 321-324.
[3] 王策, 马爱斌, 刘欢, 黄河, 孙甲鹏, 杨振权, 江静华. LPSO相增强镁稀土合金耐热性能研究进展[J]. 材料导报, 2019, 33(19): 3298-3305.
[4] 刘泓吟, 杨宏宇, 陈明凤. 异氰酸酯指数对聚氨酯硬泡阻燃、热稳定性及燃烧性能的影响[J]. 材料导报, 2019, 33(12): 2071-2075.
[5] 施渊吉, 吴晓春, 闵娜. Fe-Cr-Mo-W-V系热作模具钢高温热稳定性机理研究[J]. 材料导报, 2018, 32(6): 930-936.
[6] 费志方, 李昆锋, 杨自春, 高文杰, 陈国兵. APTES交联型聚酰亚胺气凝胶的制备与表征[J]. 材料导报, 2018, 32(20): 3623-3627.
[7] 胡德超,贾志欣,钟邦超,董焕焕,丁勇,罗远芳,贾德民. 废印刷电路板非金属粉负载二氧化硅杂化填料的制备及其在不饱和聚酯中的应用[J]. 《材料导报》期刊社, 2018, 32(2): 278-281.
[8] 邓莉萍, 鲁世强, 林彦. 合金元素Ni对NbCr2/Nb合金热稳定性的影响[J]. 《材料导报》期刊社, 2018, 32(14): 2442-2447.
[9] 刘莹莹, 陈子勇, 金头男, 柴丽华. 600 ℃高温钛合金发展现状与展望[J]. 《材料导报》期刊社, 2018, 32(11): 1863-1869.
[10] 刘建国, 安振涛, 张倩, 杜仕国, 姚凯, 王金. 硝酸羟胺的热稳定性评估及热分解机理研究*[J]. 《材料导报》期刊社, 2017, 31(4): 145-152.
[11] 雷若姗, 陈广润, 徐时清, 王焕平, 汪明朴. 大塑性变形工艺制备纳米晶过饱和固溶体的研究进展*[J]. 《材料导报》期刊社, 2017, 31(21): 130-134.
[12] 吴唯, 陈诗英, 宗孟静子. 纳米Al2O3/聚醚砜-环氧树脂复合材料的介电性能及热稳定性能[J]. 《材料导报》期刊社, 2017, 31(20): 21-24.
[13] 曾艳, 吴晓春, 夏书文, 左鹏鹏. 镍元素对新型压铸模具钢热稳定性的影响*[J]. 《材料导报》期刊社, 2017, 31(16): 72-75.
[1] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[2] Ming HE,Yao DOU,Man CHEN,Guoqiang YIN,Yingde CUI,Xunjun CHEN. Preparation and Characterization of Feather Keratin/PVA Composite Nanofibrous Membranes by Electrospinning[J]. Materials Reports, 2018, 32(2): 198 -202 .
[3] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[4] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[5] LI Jiawei, LI Dayu, GU Yixin, XIAO Jinkun, ZHANG Chao, ZHANG Yanjun. Research Progress of Regulating Anatase Phase of TiO2 Coatings Deposited by Thermal Spray[J]. Materials Reports, 2017, 31(3): 26 -31 .
[6] ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[7] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[8] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[9] DU Wenbo, YAO Zhengjun, TAO Xuewei, LUO Xixi. High-temperature Anti-oxidation Property of Al2O3 Gradient Composite Coatings on TC11 Alloys[J]. Materials Reports, 2017, 31(14): 57 -60 .
[10] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed