Automobile Air Intake Grille Material Processing Technology and Structure Design:a Review
QIU Baojin1, WU Guorong2,*, LI Xuekun3
1 School of Art, Donghua University of chnology, Nanchang 330013, China 2 School of Art and Design, Nanchang University, Nanchang 330031, China 3 Art College of Guizhou Institute of Engineering and Applied Technology, Bijie 551700, Guizhou, China
Abstract: The development and application of new materials and technologies, as well as the improvement of processing technology level, make the structure design of automobiles have a broader space. As an important part of the front face of the vehicle, the intake grille is not only related to the structural composition, component molding and various performances of the vehicle, but also affects its appearance recognition to a large extent. This paper firstly introduces the evolution of the component structure and material of intake grille in the car, as well as the forming process of the grille material, and then analyzes the main structure type, the relationship between structure and materials, and the relationship between material and performance of the current intake grille in the car. The performance of intake grille in the car is related to the structure design and materials using, and the safety and heat dissipation in performance requirements are the primary factors to be considered in the design process of intake grille in the car. Lightweight materials such as carbon fiber can better meet the designability of device structure, and have the characteristics of light weight and beauty, but it is more challenging for the processing and manufacturing, while it is the research focus in the future.
1 Wu G R, Yang M L. Product modeling design, Wuhan University of Technology Press, China, 2010, pp. 3(in Chinese). 吴国荣, 杨明朗. 产品造型设计, 武汉理工大学出版社, 2010, pp.3. 2 Tian Y Q, Li W, Zheng X P, et al. Materials Reports A: Review Papers, 2019, 33(4), 1109(in Chinese). 田亚强, 黎旺, 郑小平, 等. 材料导报:综述篇, 2019, 33(4), 1109. 3 Zang X, Cai M, Sun B Z. Materials Reports, 2022, 36(5), 20100169(in Chinese). 张显, 蔡明, 孙宝忠. 材料导报, 2022, 36(5), 20100169. 4 Li R, Pu Z Z . Mechanical Design, 2022, 39 (1), 135(in Chinese). 李苒, 朴正株. 机械设计, 2022, 39(1), 135. 5 Gong C, Shen J, Yu Y, et al. International Journal of Green Energy, 2020, 17(10), 591. 6 Petrov A. In:Safety in Aviation and Space Technologies: Select Procee-dings of the 9th World Congress" Aviation in the XXI Century". Springer, Cham, 2022, pp. 381. 7 Yoshitake K, Tateyama H, Ogawa A. SAE International Journal of Passenger Cars-Mechanical Systems, 2017, 10(2). 8 Wu G R, Chen X H. Materials Reports, 2021, 35(19), 19181(in Chinese). 吴国荣, 陈旭辉. 材料导报, 2021, 35(19), 19181. 9 De Medio F. Impact on new aerodynamic solutions for the front-end on the engine bay thermal performance. Master's Thesis, University of Windsor, Canada, 2014. 10 Ahmad M, Berthoud G, Mercier P. International Journal of Heat and Mass Transfer, 2009, 52(1-2), 442. 11 Yang F, Guo G, Dong Y, et al. Journal of Computational and Theoretical Nanoscience, 2016, 13(8), 5375. 12 Liu C B, Liu K, Zhan K, et al. Mechanical Design and Manufacturing, 2021 (9), 160(in Chinese). 刘传波, 刘康, 占魁, 等. 机械设计与制造, 2021(9), 160. 13 Liu C H. Study on the influence of air inlet grille on aerodynamic characteristics of car. Master's Thesis, Wuhan University of technology, China, 2017(in Chinese). 刘春华. 进气格栅对轿车气动特性影响研究. 硕士学位论文, 武汉理工大学, 2017. 14 Wang C L, Hu H, Qiao W Y, et al. Plastics Industry, 2021, 49(10), 42 (in Chinese). 王晨蕾, 胡浩, 乔雯钰,等. 塑料工业, 2021, 49(10), 42. 15 Zhou X W. Research on the integration of car front face image into modeling design based on Gestalt psychology. Master's Thesis, Jiangsu University, China, 2021(in Chinese). 周西望. 基于格式塔心理学的轿车前脸意象融入造型设计研究. 硕士学位论文, 江苏大学, 2021. 16 Li W, Tu J, Liu Y, et al. International Journal of Refrigeration, 2021, 131, 834. 17 Zhang Y F, Duan L B, Lu J, et al. Journal of Shenzhen University (Science and Technology Edition), 2022, 39(6), 7(in Chinese). 张亚芳, 段莉斌, 卢娟, 等. 深圳大学学报(理工版), 2022, 39(6), 7. 18 Yin L, Huang L Q, Li M Z . Packaging Engineering, 2021, 42 (20), 159(in Chinese). 尹磊, 黄黎清, 李明珠. 包装工程, 2021, 42(20), 159. 19 Yu X B, Tao L, Zhang W Y. Modern Coatings and Coatings, 2022, 25(1), 69(in Chinese). 余晓波, 陶磊, 张皖阳. 现代涂料与涂装, 2022, 25(1), 69. 20 Cheng Y S, Xu X Q, Chen Guoqiang, et al. Computer Integrated Manufacturing System, 2021, 27 (4), 1135(in Chinese). 程永胜, 徐骁琪, 陈国强, 等. 计算机集成制造系统, 2021, 27(4), 1135. 21 Wang H H, Chu S N, Gu J W. Journal of Graphics, 2021, 42 (4), 688(in Chinese). 王欢欢, 初胜男, 顾经纬. 图学学报, 2021, 42(4), 688. 22 Xu Z M . Journal of Lanzhou University (Social Science Edition), 2022, 50 (2), 100(in Chinese). 徐子淼. 兰州大学学报(社会科学版), 2022, 50(2), 100. 23 Cai K W, Li Q F, Wang C P. Plastics, 2022, 51 (1), 89(in Chinese). 蔡凯武, 李秋奋, 王春鹏. 塑料, 2022, 51(1), 89. 24 Zhang X F. Research and design of automobile modeling style. Master's Thesis, Tsinghua University, China, 2019(in Chinese). 张旭峰. 汽车造型风格研究与设计. 硕士学位论文, 清华大学, 2019. 25 Huo J X, Li X. Research on Philosophy of Science and Technology, 2021, 38 (4), 109(in Chinese). 霍佳鑫, 李侠. 科学技术哲学研究, 2021, 38(4), 109. 26 Deportee Yohan, Ghasemnejad Hessam. Open Journal of Composite Materials, 2020, 11(1), 1. 27 Li Y, Wu Y L. Packaging Engineering, 2020, 41(6), 72(in Chinese). 李勇, 武银路. 包装工程, 2020, 41(6), 72. 28 Dang Y, Qin P, Yan S. Chinese Journal of Automotive Engineering, 2021, 11(6), 442(in Chinese). 党岩, 秦鹏, 闫石. 汽车工程学报, 2021, 11(6), 442. 29 Scafà M, Marconi M, Germani M. Journal of Computational Design and Engineering, 2020, 7(3), 269. 30 Bao J S, Zhang R, Li J, et al. Chinese Journal of Mechanical Engineering, 2022, 58(18), 103(in Chinese). 鲍劲松, 张荣, 李婕, 等. 机械工程学报, 2022, 58(18), 103. 31 Zhou X H, Song W. Triggered Journal of Nanjing Academy of Arts (Art and Design), 2021(6), 69(in Chinese). 周笑寒, 宋武. 南京艺术学院学报(美术与设计), 2021(6), 69. 32 Li R, Piao Z Z. Mechanical Design, 2022, 39(1), 135(in Chinese). 李苒, 朴正株. 机械设计, 2022, 39(1), 135. 33 Long R, Zhu W Q, Li J, et al. Mechanical Design, 2021, 38(11), 115(in Chinese). 龙韧, 朱文强, 李珺, 等. 机械设计, 2021, 38(11), 115. 34 Ju Q H, Huang J, Ruan J K. Journal of Hubei Institute of Automotive Industry, 2021, 35(3), 68(in Chinese). 鞠清绘, 黄杰, 阮景奎. 湖北汽车工业学院学报, 2021, 35(3), 68. 35 Li Y, Qi E D. Creativity and Design, 2021(1), 26(in Chinese). 李勇, 戚恩东. 创意与设计, 2021(1), 26. 36 Cheng Y S, Xu X Q, Bu J, et al. Modern Manufacturing Engineering, 2020(7), 102(in Chinese). 程永胜, 徐骁琪, 卜俊, 等. 现代制造工程, 2020(7), 102. 37 Yang J M, Li S, Gong C. Packaging Engineering, 2021, 42(20), 29(in Chinese). 杨建明, 李洒, 巩超. 包装工程, 2021, 42(20), 29. 38 Li C, Zhang B C, Wang Y Q, et al. Packaging Engineering, 2020, 41(6), 211(in Chinese). 李闯, 张丙辰, 王艳群, 等. 包装工程, 2020, 41(6), 211. 39 Li Y, Wu Y L. Packaging Engineering, 2020, 41(6), 72(in Chinese). 李勇, 武银路. 包装工程, 2020, 41(6), 72. 40 Jiang X L R, Gu H M, Xiao K, et al.In:The 14th International Forum of Automotive Traffic Safety. Changsha, China, 2017, pp.187 ( in Chinese). 蒋熊力忍, 顾海明, 肖克. 第十四届国际汽车交通安全论坛. 长沙, 2017, pp.187. 41 Jing C H, Zhang J. Mechanical Design, 2016, 33(7), 121(in Chinese). 景春晖, 张晶. 机械设计, 2016, 33(7), 121.
渝公网安备50019002502923号 版权所有：《材料导报》编辑部
2023, Vol. 37 
