Please wait a minute...
材料导报  2022, Vol. 36 Issue (15): 20120220-7    https://doi.org/10.11896/cldb.20120220
  无机非金属及其复合材料 |
钎焊金刚石工具失效机理及其抑制策略研究进展
张健*, 李鑫, 徐琦, 胡永乐, 毛聪, 张明军
长沙理工大学机械装备高性能智能制造湖南省重点实验室,长沙 410114
Research Progress on Failure Mechanisms and Failure Inhibition Strategies of Brazed Diamond Tools
ZHANG Jian*, LI Xin, XU Qi, HU Yongle, MAO Cong, ZHANG Mingjun
Hunan Provincial Key Laboratory of Intelligent Manufacturing Technology for High-performance Mechanical Equipment, Changsha University of Science and Technology, Changsha 410114, China
下载:  全 文 ( PDF ) ( 17440KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 随着《中国制造2025》战略的实施,制造领域对先进工具的加工精度与加工效率要求不断提升。钎焊金刚石工具因金刚石与钎料合金间具有良好的界面结合特性而备受学术与工业界的广泛关注。如何有效增强金刚石与基体间的界面结合强度并同时减少钎焊过程中金刚石的热损伤,是当前钎焊金刚石工具的研究焦点。本文详细阐述了钎焊金刚石的界面结合机理、金刚石热损伤机制以及钎焊金刚石工具失效抑制策略方面的国内外研究进展,并对未来钎焊金刚石工具的研究方向进行了展望,以期为高性能加工工具的设计开发提供参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张健
李鑫
徐琦
胡永乐
毛聪
张明军
关键词:  钎焊金刚石  界面结合机理  热损伤  失效  抑制策略    
Abstract: With the implementation of ‘Made in China 2025’ strategy, the requirements for processing accuracy and efficiency of advanced tools in manufacturing field are continuously improved. Brazed diamond tools have attracted extensive attention from academia and industry because of the good interfacial bonding characteristics between diamond and filler alloys. How to effectively enhance the interfacial bonding strength between the diamond and the matrix and to reduce the thermal damage of the diamond during the brazing process is the current research focus of brazed diamond tools. In this paper, the research progress on the interfacial bonding mechanisms, thermal damage mechanisms of brazed diamond and failure inhibition strategies of brazed diamond tools are elaborated, and the future research direction of brazed diamond tools is suggested, which is expected to provide reference for the design and development of high-performance machining tools.
Key words:  brazed diamond    interfacial bonding mechanism    thermal damage    failure    inhibition strategy
出版日期:  2022-08-10      发布日期:  2022-08-15
ZTFLH:  TG454  
基金资助: 国家自然科学基金(51875050; 51641502);长沙市科技计划项目(kq1907089)
通讯作者:  *zj4343@163.com   
作者简介:  张健,长沙理工大学汽车与机械工程学院教授。2002年、2009年分别于中南大学获得学士学位、湖南大学获得博士学位。目前主要从事异质材料连接方面的理论与技术研究。
引用本文:    
张健, 李鑫, 徐琦, 胡永乐, 毛聪, 张明军. 钎焊金刚石工具失效机理及其抑制策略研究进展[J]. 材料导报, 2022, 36(15): 20120220-7.
ZHANG Jian, LI Xin, XU Qi, HU Yongle, MAO Cong, ZHANG Mingjun. Research Progress on Failure Mechanisms and Failure Inhibition Strategies of Brazed Diamond Tools. Materials Reports, 2022, 36(15): 20120220-7.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.20120220  或          http://www.mater-rep.com/CN/Y2022/V36/I15/20120220
1 Chen Y, Fu Y C, Su H H, et al. International Journal of Refractory Me-tals and Hard Materials, 2014, 42, 23.
2 Azarhoushang B. The International Journal of Advanced Manufacturing Technology, 2014, 74(9-12), 1293.
3 Rommel D, Scherm F, Kuttner C, et al. Surface and Coatings Technology, 2016, 291, 62.
4 Qi W C, Lu J B, Li Y, et al. Journal of Materials Engineering and Performance, 2017, 26(8), 4112.
5 Lu J B, Cao Z Y, Qi F J, et al. Diamond and Related Materials, 2018, 90, 116.
6 Duan D Z, Xiao B, Wang B, et al. International Journal of Refractory Metals and Hard Materials, 2015, 48, 427.
7 Mukhopadhyay P, Simhan D R, Ghosh A. Journal of Materials Processing Technology, 2017, 250, 390.
8 Xiao H Z, Xiao B, Wu H H. Journal of Alloys and Compounds, 2019, 781, 226.
9 Gan J, Gao H, Wen S F, et al. International Journal of Refractory Metals and Hard Materials, 2020, 87, 105144.
10 Xiao H Z, Xiao B, Liu S X, et al. Vacuum, 2019, 164, 158.
11 Artini C, Muolo M L, Passerone A. Journal of Materials Science, 2012, 47(7), 3252.
12 Yang Z B, Liu A J, Yang R Y, et al. Rare Metal Materials and Enginee-ring, 2016, 45(5), 1152.
13 Duan D Z, Sun L, Lin Q J, et al. International Journal of Refractory Metals and Hard Materials, 2019, 80, 253.
14 Li M, Chen J C, Lin Q L, et al. Diamond and Related Materials, 2019, 97, 107440.
15 Chen J C, Mu D K, Liao X J, et al. International Journal of Refractory Metals and Hard Materials, 2018, 74, 52.
16 Wang C Y, Zhou Y M, Zhang F L, et al. Journal of Alloys and Compounds, 2009, 476(1), 884.
17 Zhang Z Y, Xiao B, Duan D Z, et al. International Journal of Refractory Metals and Hard Materials, 2017, 66, 211.
18 Wu Q P, Luo Z, Deng Z H, et al. Transactions of Materials and Heat Treatment, 2018, 39(3), 151 (in Chinese).
伍俏平, 罗舟, 邓朝晖, 等.材料热处理学报, 2018, 39(3), 151.
19 Mukhopadhyay P, Ghosh A. International Journal of Refractory Metals and Hard Materials, 2018, 72, 236.
20 Lu J B, Tang F, Meng P, et al. Transactions of the China Welding Institution, 2010, 31(8), 25 (in Chinese).
卢金斌, 汤峰, 孟普, 等.焊接学报, 2010, 31(8), 25.
21 Guo X G, Liu T, Zhai C H, et al. Journal of Mechanical Engineering, 2016, 52(20), 23 (in Chinese).
郭晓光, 刘涛, 翟昌恒, 等.机械工程学报, 2016, 52(20), 23.
22 Chen Y, Xu H J, Fu Y C, et al. Transactions of the China Welding Institution, 2009, 30(9), 21 (in Chinese).
陈燕, 徐鸿钧, 傅玉灿, 等.焊接学报, 2009, 30(9), 21.
23 Duan D Z, Li C S, Sun L, et al. Journal of Alloys and Compounds, 2020, 816, 152630.
24 Zhang W, Zhang M Y, Peng Y B, et al. Entropy, 2019, 21(2), 164.
25 Sun B J, Xiao B. Diamond and Related Materials, 2018, 85, 98.
26 Buhl S, Leinenbach C, Spolenak R, et al. Journal of Materials Science, 2010, 45(16), 4358.
27 Buhl S, Leinenbach C, Spolenak R, et al. International Journal of Refractory Metals and Hard Materials, 2012, 30(1), 16.
28 Lu J B, Li H, Liu W, et al. China Mechanical Engineering, 2018, 29(3), 353 (in Chinese).
卢金斌, 李华, 刘威, 等.中国机械工程, 2018, 29(3), 353.
29 Lu J B, Qi W C, Li Y, et al. International Journal of Refractory Metals and Hard Materials, 2017, 67, 141.
30 Lu J B, Qi W C, Zhang W X, et al. The International Journal of Advanced Manufacturing Technology, 2017, 90(1-4), 649.
31 Duan D Z, Ma Y S, Ding J J, et al. Ceramics International, 2020, 46(10), 16684.
32 Zhao J, Guo M, Hu S P, et al. Diamond and Related Materials, 2020, 109,108004.
33 Duan D Z, Sun L, Fang X D, et al. Diamond and Related Materials, 2019, 93, 216.
34 Duan D Z, Li C S, Ding J J, et al. Ceramics International, 2020, 46(9), 13180.
35 Duan D Z, Xiao B, Wang W, et al. Journal of Alloys and Compounds, 2015, 644, 626.
36 Ma B J, Lian F. International Journal of Refractory Metals and Hard Materials, 2013, 41, 339.
37 Zhang C, Cai Z Y, Wang R, et al. Materials & Design, 2016, 95, 39.
38 Peng Y B, Kong Y, Zhang W, et al. Journal of Alloys and Compounds, 2021, 852, 157023.
39 Shen J Y, Li L J, Wu X, et al. International Journal of Refractory Metals and Hard Materials, 2019, 84, 104973.
40 Liu F, Yang Y, Pan B S. Surface Engineering, 2019, 35(1), 29.
41 Zhao X J, Duan L C. Metals, 2018, 8(5), 307.
42 Xu Q, Zhang J, Hu Y L, et al. Journal of Alloys and Compounds, 2020, 822, 153652.
43 Zhang J, Xu Q, Hu Y L, et al. Carbon, 2019, 153, 104.
[1] 王好平, 张蒙祺, 莫继良. 盾构/TBM滚刀刀圈性能强化研究现状[J]. 材料导报, 2022, 36(7): 22010052-9.
[2] 窦学铮, 蒋立武, 宋尽霞, 赵云松. 镍基单晶高温合金力学性能各向异性的研究进展[J]. 材料导报, 2022, 36(24): 21040222-15.
[3] 邓云飞, 安静丹, 任光辉, 魏刚. 铝合金圆波纹夹芯板对半球形体的低速冲击响应特性及失效机制[J]. 材料导报, 2022, 36(24): 21080249-6.
[4] 邹雄辉, 高维成, 刘伟, 周睿. 复合材料工型梁压缩失效模式试验与仿真分析研究[J]. 材料导报, 2022, 36(24): 21060263-7.
[5] 王文权, 王苏煜, 徐宇欣, 张新戈, 毕英超, 石磊. 胶接与钎焊铝蜂窝板力学性能研究[J]. 材料导报, 2022, 36(23): 21070282-6.
[6] 刘文超, 高峰, 曲江英, 籍少敏, 霍延平. 高镍三元正极材料失效机制与改性[J]. 材料导报, 2022, 36(21): 20100053-9.
[7] 武多多, 郑会龙, 康振亚, 习常清, 张谭. 基于金属骨架的复合材料混合结构拉伸性能与失效机理分析[J]. 材料导报, 2022, 36(20): 21050214-7.
[8] 杨旭东, 刘冠甫, 胡琪, 邹田春, 沙军威, 纵荣荣. 泡沫铝疲劳性能研究进展[J]. 材料导报, 2022, 36(2): 20030052-5.
[9] 乔敏, 单广程, 高南箫, 陈健, 吴井志, 朱伯淞, 冉千平. 混凝土气泡调控型表面活性剂的研究进展[J]. 材料导报, 2022, 36(18): 20090232-7.
[10] 孟云蛟, 张有宏, 常新龙, 胡宽, 齐重阳, 王震, 朱雪蒙. 含双孔国产T800碳纤维复合材料层合板失效模式研究[J]. 材料导报, 2022, 36(14): 21030285-7.
[11] 房玉鑫, 王优强, 张平, 罗恒. SiCp/Al复合材料切削加工中颗粒失效及表面缺陷形成机理仿真研究[J]. 材料导报, 2022, 36(13): 21010146-8.
[12] 刘腾, 朱政强, 吴蔺峰. 中锰TRIP钢电阻点焊研究进展与展望[J]. 材料导报, 2022, 36(10): 20080023-7.
[13] 倪嘉, 史昆, 薛松海, 赵军, 刘时兵, 刘鸿羽, 李重阳. 航空发动机用热障涂层陶瓷材料的发展现状及展望[J]. 材料导报, 2021, 35(Z1): 163-168.
[14] 鲁明远, 韩保红, 赫万恒, 倪新华, 于金凤. 孔隙对陶瓷基复合材料强度影响的研究进展[J]. 材料导报, 2021, 35(Z1): 180-185.
[15] 董振东, 童志, 周洪宇, 王慧敏, 郑文跃, 孙晓冉, 丁辉. 抽油杆钢材的发展和抽油杆的服役失效[J]. 材料导报, 2021, 35(19): 19161-19169.
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[3] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[4] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[5] Yingke WU,Jianzhong MA,Yan BAO. Advances in Interfacial Interaction Within Polymer Matrix Nanocomposites[J]. Materials Reports, 2018, 32(3): 434 -442 .
[6] Zhengrong FU,Xiuchang WANG,Qinglin JIN,Jun TAN. A Review of the Preparation Techniques for Porous Amorphous Alloys and Their Composites[J]. Materials Reports, 2018, 32(3): 473 -482 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅡ: Durability and Life Prediction Model[J]. Materials Reports, 2018, 32(3): 496 -502 .
[8] Lixiong GAO,Ruqian DING,Yan YAO,Hui RONG,Hailiang WANG,Lei ZHANG. Microbial-induced Corrosion of Concrete: Mechanism, Influencing Factors,Evaluation Indices, and Proventive Techniques[J]. Materials Reports, 2018, 32(3): 503 -509 .
[9] Ningning HE,Chenxi HOU,Xiaoyan SHU,Dengsheng MA,Xirui LU. Application of SHS Technique for the High-level Radioactive Waste Disposal[J]. Materials Reports, 2018, 32(3): 510 -514 .
[10] Haoran CHEN, Yingdong XIA, Yonghua CHEN, Wei HUANG. Low-dimensional Perovskites: a Novel Candidate Light-harvesting Material for Solar Cells that Combines High Efficiency and Stability[J]. Materials Reports, 2018, 32(1): 1 -11 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed