Please wait a minute...
材料导报  2020, Vol. 34 Issue (Z1): 111-115    
  无机非金属及其复合材料 |
巯基-双键点击反应制备光固化红光转光膜及其性能
吕展衡1, 陈品鸿1, 许冰1, 罗颖1,2, 周武艺1,2, 董先明1,2
1 华南农业大学材料与能源学院,生物质3D打印材料研究中心,广州 510642;
2 岭南现代农业科学与技术广东省实验室,广州 510642
Preparation and Properties of Light Curable Red Light Conversion Filmby Sulfhydryl-Double Bond Click Reaction
LYU Zhanheng1, CHEN Pinhong1, XU Bing1, LUO Ying1, 2, ZHOU Wuyi1,2, DONG Xianming1,2
1 Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, China;
2 Guangdong Laboratory of Lingnan Modern Agricultural Science and Technology, Guangzhou 510642, China
下载:  全 文 ( PDF ) ( 6356KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本研究将不同含量的稀土转光剂与含巯基和双键单体共混制备了光固化树脂,然后经巯基-双键或双键-双键点击反应制备了两种农用转光膜,通过荧光光谱、UV光谱、SEM、拉伸性能测试等对转光膜的结构与性能进行表征。研究结果表明,添加0.5%(质量分数)稀土转光剂的转光膜能将波长为353 nm的紫外光转换为波长为613 nm和617 nm的红光,且该转光膜具有良好的透光性能和力学性能,拉伸强度达到12.72 MPa,在农业大棚、玻璃温室等方面具有良好的应用前景。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
吕展衡
陈品鸿
许冰
罗颖
周武艺
董先明
关键词:  稀土转光剂  光固化树脂  农用转光膜  转光性能  力学性能    
Abstract: In this paper, the light curing resin was prepared by blending rare earth light conversion agent with sulfhydryl and double bond monomers. Two kinds of agricultural light conversion films were prepared by sulfhydryl-double bond or double bond-double bond click reaction. The structure and properties of the films were characterized by fluorescence spectrum, UV spectrum, SEM and tensile propertytest. The results show that the UV light at 353 nm can be converted into red light at 613 nm and 617 nm by using light conversion film which have been prepared by adding 0.5% rare earth light conversion into light curing resin, sulfhydryl-double bond click reaction. The film has good light transmittance and light conversion performance, and mechanical properties with tensile strength of 12.72 MPa, which has good application in agricultural greenhouses, glass greenhouses and other aspects.
Key words:  rare earth light conversion agent    light curing resin    agricultural light conversion film    light conversion performance    mechanical property
                    发布日期:  2020-07-01
ZTFLH:  TQ437  
基金资助: 广东省科技计划项目应用型科技研发专项重点项目(2015B020237009)
作者简介:  吕展衡,硕士研究生。研究方向为光固化涂料及胶粘剂;董先明,博士,教授,硕士研究生导师。研究方向为聚合物基复合材料及功能材料。
引用本文:    
吕展衡, 陈品鸿, 许冰, 罗颖, 周武艺, 董先明. 巯基-双键点击反应制备光固化红光转光膜及其性能[J]. 材料导报, 2020, 34(Z1): 111-115.
LYU Zhanheng, CHEN Pinhong, XU Bing, LUO Ying, ZHOU Wuyi, DONG Xianming. Preparation and Properties of Light Curable Red Light Conversion Filmby Sulfhydryl-Double Bond Click Reaction. Materials Reports, 2020, 34(Z1): 111-115.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2020/V34/IZ1/111
1 Lian S, Rong C, Yin D, et al. Journal of Physical Chemistry C,2009,113(15),6298.
2 Lian S, Qi Y, Rong C, et al. Journal of Physical Chemistry C,2010,114(15),7196.
3 Zhang H, Zhang H, Zhuang J, et al. Ceramics International,2016,42(11),13011.
4 Engelen-Eigles G, Holden G, Cohen J D, et al. Journal of Agricultural and Food Chemistry,2006,54(2),328.
5 Jia Y, Zhang X J, Hao X J, et al. Biomaterials,2014,35(10),3356.
6 Gao J Q, Jiang R Z, Wang J, et al. Chemical Engineering Journal,2011,168(3),1041.
7 Zhao W, White J M. Applied Physics Letters,2005,87(10),1.
8 Duan C J, Delsing A C A, Hintzen H T. Chemistry of Materials,2009,40(25),1010.
9 Bachmann V, Ronda C, Oeckler O, et al. Chemistry of Materials,2009,40(17),316.
10 Watanabe H, Kijima N. Journal of Alloys & Compounds,2009,475(1),434.
11 Qiu Z, Rong C, Zhou W, et al. Journal of Alloys and Compounds,2014,583,335.
12 叶孔敦,光昭,范文慧.光子学报,2001,30(4),487.
13 Wang Y T, Yu Y J, Liu W J, et al. Journal of Agricultural and Food Chemistry,2018,66(50),13295.
14 Yu Y, Xu P, Jia S et al. International Journal of Biological Macromolecules,2019,127,210.
15 Wang D, Meng X, Xu B, et al. Chemical Physics Letters,2017,677,148.
16 Fan H T, Sun We, Jiang B, et al. Chemical Engineering Journal,2016,286,128.
17 Okutsu R, Ando S, Ueda M, et al. Chemistry of Materials,2008,20(12),4017.
18 Terraza C A, Liu J G, Nakamura Y, et al. Journal of Polymer Science: Part A Polymer Chemistry,2010,46,1510.
19 Damián P Q, Alfredo S, Hierro I D, et al. Journal of Colloid and Interface Science,2007,313(2),551.
[1] 王枭, 郭伟, 胡月阳, 陈芹, 仇佳琳, 李正阳, 陈佳彬, 管荣成. 硫硅酸钙的合成及水化性能的研究[J]. 材料导报, 2020, 34(Z1): 169-172.
[2] 吴昊宇, 吴培红, 卞立波, 陶志. 纤维珠链在混凝土抗裂性能设计中的应用研究[J]. 材料导报, 2020, 34(Z1): 193-198.
[3] 李文杰, 陈宜虎, 范理云, 吕海波. 钙质砂水泥砂浆力学性能试验研究及微观结构分析[J]. 材料导报, 2020, 34(Z1): 224-228.
[4] 江雯, 蒋璐瑶, 黄伟九, 郭非, 董海澎. 退火处理对搅拌摩擦加工LZ91双相镁锂合金微观组织及力学性能的影响[J]. 材料导报, 2020, 34(Z1): 307-311.
[5] 宋文杰, 刘洁, 董会萍, 张光, 王彤. 超轻镁锂合金熔炼工艺研究[J]. 材料导报, 2020, 34(Z1): 316-321.
[6] 黄同瑊, 晁代义, 宋晓霖, 张伟, 王志雄, 张华, 吕正风. 热轧工艺对Al-Cu-Mg合金组织及性能的影响[J]. 材料导报, 2020, 34(Z1): 322-324.
[7] 陈姝敏, 吴迪, 何文浩, 陈勇. 银纳米粒子负载的石墨烯基环氧树脂复合材料的制备及性能[J]. 材料导报, 2020, 34(Z1): 503-506.
[8] 汪知文, 李碧雄. 稻壳灰应用于水泥混凝土的研究进展[J]. 材料导报, 2020, 34(9): 9003-9011.
[9] 徐翔宇, 郑勇, 吴昊, 丁青军, 王丽珠, 欧阳杰. 无磁金属陶瓷的研究进展[J]. 材料导报, 2020, 34(9): 9064-9068.
[10] 李世磊, 胡平, 段毅, 左烨盖, 邢海瑞, 李辉, 邓洁, 冯鹏发, 王快社, 胡卜亮. 掺杂方式对钼合金组织与力学性能影响的研究进展[J]. 材料导报, 2020, 34(9): 9132-9142.
[11] 靳贺松, 李福海, 何肖云峰, 王江山, 胡丁涵, 胡志明. 聚丙烯纤维水泥基复合材料的抗冻性能研究[J]. 材料导报, 2020, 34(8): 8071-8076.
[12] 陶继闯, 卢一平. Mo含量对Al0.1CoCrCu0.5FeNiMox高熵合金的组织结构、力学性能及耐蚀性能的影响[J]. 材料导报, 2020, 34(8): 8096-8099.
[13] 徐道芬, 陈康华, 胡桂云, 陈送义. 微量稀土Ce对Al-Zn-Mg铝合金组织和腐蚀性能的影响[J]. 材料导报, 2020, 34(8): 8100-8105.
[14] 信思树, 王镇华, 李春玲, 王清. 体心立方BCC基多元合金中的共格析出及强化[J]. 材料导报, 2020, 34(7): 7130-7137.
[15] 袁小亚, 彭一豪, 孙立涛, 郑旭煦, 秦泽海. 热还原氧化石墨烯在水泥水化介质中的分散及其增强砂浆的性能与机理研究[J]. 材料导报, 2020, 34(6): 6075-6080.
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[3] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[4] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[5] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[6] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[7] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[8] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[9] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[10] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed