Please wait a minute...
材料导报  2023, Vol. 37 Issue (8): 21090231-5    https://doi.org/10.11896/cldb.21090231
  金属与金属基复合材料 |
退火温度对耐热型取向硅钢组织与磁性能的影响
何承绪1,*, 高洁1, 毛航银2, 马光1, 陈新1, 祝志祥1, 张一航2, 胡卓超3
1 全球能源互联网研究院有限公司, 先进输电技术国家重点实验室, 北京 102211
2 国网浙江省电力公司, 浙江 金华 310007
3 宝钢股份中央研究院硅钢所, 上海 200000
Effect of Annealing Temperature on Microstructure and Magnetic Properties of Heatproof Grain-oriented Silicon Steel
HE Chengxu1,*, GAO Jie1, MAO Hangyin2, MA Guang1, CHEN Xin1, ZHU Zhixiang1, ZHANG Yihang2, HU Zhuochao3
1 State Key Laboratory of Advanced Power Transmission Technology, Global Energy Interconnection Research Institute Co., Ltd., Beijing 102211, China
2 State Grid Zhejiang Electric Power Co., Ltd., Jinhua 310007,Zhejiang, China
3 Baosteel Central Research Institute, Shanghai 200000, China
下载:  全 文 ( PDF ) ( 6060KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用OM和EBSD技术对两种耐热型取向硅钢的微观组织进行了检测分析,研究了不同退火温度下组织的变化规律及耐热机理。结果表明:齿状辊沟槽法是在带材表层形成小晶粒组织和“缝隙”,激光照射法是在带材表层形成“V”字型沟槽。激光照射法取向硅钢耐热温度约为850 ℃,齿状辊沟槽法取向硅钢耐热温度约为800 ℃,前者耐热性更为优异。随着退火温度的升高,两种带材的损耗逐渐升高。齿状辊沟槽法取向硅钢损耗升高主要是刻痕区与两侧的Goss晶粒取向差降低所致,而激光照射法取向硅钢损耗升高可能与沟槽附近处Goss晶粒取向的变化有关。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
何承绪
高洁
毛航银
马光
陈新
祝志祥
张一航
胡卓超
关键词:  取向硅钢  耐热刻痕  微观组织  织构  Goss  退火温度  磁性能    
Abstract: In this work, microstructures of two kinds of heatproof grain-oriented silicon steel were investigated by OM and EBSD technique, and the change evolution of microstructure and heatproof mechanism under different annealing temperatures were studied. The results show that small grains and ‘gap’ were formed in the strip surface by toothed roll groove method, and ‘V’ shaped groove was formed in the strip surface by laser irradiation method. The heatproof temperature of laser irradiation grain-oriented silicon steel was about 850 ℃, and the heatproof temperature of toothed roll groove grain-oriented silicon steel was about 800 ℃. The former has better heatroof. With annealing temperatures increased, the iron loss of two strips increased gradually. For toothed roll groove grain-oriented silicon steel, it's mainly due to the decrease of misorientation difference between the notch area and the Goss grains on both sides, while for laser irradiation grain-oriented silicon steel may be related to the change of Goss orientation near the groove.
Key words:  grain-oriented silicon steel    heatproof grooving    microstructure    texture    Goss    annealing temperature    magnetic property
出版日期:  2023-04-25      发布日期:  2023-04-24
ZTFLH:  TG142.77  
基金资助: 国家电网公司科技项目(5500-202058251A-0-0-00)
通讯作者:  *何承绪,高级工程师。2013—2017年在北京科技大学获得博士学位,主要从事取向硅钢研究。目前以第一作者发表文章8篇,申请专利4项,其中授权1项。ustbhechengxu@163.com   
引用本文:    
何承绪, 高洁, 毛航银, 马光, 陈新, 祝志祥, 张一航, 胡卓超. 退火温度对耐热型取向硅钢组织与磁性能的影响[J]. 材料导报, 2023, 37(8): 21090231-5.
HE Chengxu, GAO Jie, MAO Hangyin, MA Guang, CHEN Xin, ZHU Zhixiang, ZHANG Yihang, HU Zhuochao. Effect of Annealing Temperature on Microstructure and Magnetic Properties of Heatproof Grain-oriented Silicon Steel. Materials Reports, 2023, 37(8): 21090231-5.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.21090231  或          http://www.mater-rep.com/CN/Y2023/V37/I8/21090231
1 Hayakawa Y, Szpunar J A. Acta Materialia, 1997, 45(11), 4713.
2 Lee D N, Jeong H T.Scripta Materialia, 1998, 38(8), 1219.
3 Homma H, Hutchinson B, Kubota T.Journal of Magnetism and Magnetic Materials, 2003, 254-255, 331.
4 Takahashi N, Suga Y, Kobayashi H.Journal of Magnetism and Magnetic Materials, 1996, 160, 98.
5 Li X H, Meng X T, Zhao P F, et al.China Metallurgy, 2019, 29(1) , 1 (in Chinese).
黎先浩, 孟小涛, 赵鹏飞, 等.中国冶金, 2019, 29(1), 1.
6 Kumano T, Haratani T, Fujii N.ISIJ International, 2005, 45(1), 95.
7 Sakai T, Shiozaki M, Takashina K.Journal of Applied Physics, 1979, 50(3),2369.
8 Xia Z S, Kang Y L, Ni X J, et al.Journal of University of Science and Technology Beijing, 2009, 31(4), 439 (in Chinese).
夏兆所, 康永林, 倪献娟, 等.北京科技大学学报, 2009, 31(4), 439.
9 Krause R F, Rauch G C, Kasner W H, et al.Journal of Applied Physics, 1984, 55(6),2121.
10 Yabumoto M, Kobayashi H, Nozawa T.IEEE Transactions on Magnetics, 1987, 23(5), 3062.
11 Zhu Y C, Wang L F, Qiao X L.Research on Iron & Steel, 2006, 34(6), 50 (in Chinese).
朱业超, 王良芳, 乔学亮. 钢铁研究, 2006, 34(6), 50.
12 Wang Y.Metal World, 2017(3), 16 (in Chinese).
王媛. 金属世界, 2017(3), 16.
13 Kobayashi H, Kuroki K, Sasaki E, et al.Physica Scripta, 1988, T24, 36.
14 Kosuge K, Hirose K, Kuroki K. Journal of Materials Engineering and Performance, 1994, 3(6), 706.
15 He Z Z, Zhao Y, Luo H W.Electrical steel, Metallurgical Industry Press,China, 2012(in Chinese).
何忠治, 赵宇, 罗海文.电工钢, 冶金工业出版社, 2012.
16 Sun F J, Peng X J, Li C J.Journal of Materials Science and Technology, 2000, 16(2), 163.
17 Yang Y L, Sun F J, Zhang R F, et al.Journal of Northeastern University(Natural Science), 2002, 23(2),189 (in Chinese).
杨玉玲, 孙凤久, 张瑞峰, 等. 东北大学学报(自然科学版), 2002, 23(2),189.
18 Sun F J, Zhang D, Yang Y L, et al. Journal of Functional Materials, 2001(10) , 1840 (in Chinese).
孙凤久, 张多, 杨玉玲, 等. 功能材料, 2001(10), 1840.
19 Zhu H, Guo L, Zhang Q M.Applied Laser, 2015, 35(1), 83 (in Chinese).
朱虹, 郭亮, 张庆茂. 应用激光, 2015, 35(1), 83.
20 Ma C, Hou Y F, Wang T, et al. Electronics Quality, 2017(6), 6 (in Chinese).
马冲, 侯仰风, 王田, 等.电子质量, 2017(6), 6.
21 Qi Y X, Song D J, Zheng L.Transformer, 2018, 55(6), 32 (in Chinese).
戚宇祥, 宋丹菊, 郑玲.变压器, 2018, 55(6), 32.
22 Li H J, Yang P, Jiang Q W, et al.Metallic Functional Material, 2015, 22(1),11 (in Chinese).
李海蛟, 杨平, 蒋奇武, 等.金属功能材料, 2015, 22(1),11.
23 Li H J, Yang P, Jiang Q W, et al.Transactions of Materials and Heat Treatment, 2015, 36(3),182 (in Chinese).
李海蛟, 杨平, 蒋奇武, 等.材料热处理学报, 2015, 36(3),182.
24 Zhu Y C, Luo Z H, Cheng X W, et al.Steel Rolling, 2018, 35(S2), 70 (in Chinese).
朱业超, 骆忠汉, 程祥威, 等. 轧钢, 2018, 35(S2), 70.
[1] 陈磊, 徐荣正, 张利, 刘亚光, 李正坤, 张海峰, 张波. Zr基非晶夹层对Al/TA1异种金属电子束焊接头组织和性能的影响[J]. 材料导报, 2023, 37(8): 21100079-4.
[2] 乔丽学, 曹睿, 车洪艳, 李晌, 王铁军, 董浩, 王彩芹, 闫英杰. M390高碳马氏体不锈钢与304奥氏体不锈钢CMT对接焊连接机理[J]. 材料导报, 2023, 37(7): 21090294-6.
[3] 张冠星, 董宏伟, 钟素娟, 薛行雁, 刘晓芳, 常云峰. BAg30CuZnSn退火过程中组织性能演变[J]. 材料导报, 2023, 37(6): 21070103-4.
[4] 谢吉林, 彭程, 谢菀新, 淦萌萌, 章文滔, 吴集思, 陈玉华. 铝/镁异种合金磁脉冲焊接接头组织与性能研究[J]. 材料导报, 2023, 37(5): 22010051-5.
[5] 郝思洁, 褚强, 李文亚, 杨夏炜, 邹阳帆. 电脉冲处理对金属材料组织、力学性能影响的研究进展[J]. 材料导报, 2023, 37(4): 21030039-9.
[6] 杨亚苹, 李艳辉, 张伟. 脱合金化法制备纳米多孔铂合金的研究进展[J]. 材料导报, 2023, 37(3): 21020061-7.
[7] 罗翔, 米振莉, 吴彦欣, 杨永刚, 江海涛, 胡宽辉. 退火温度对LH800空冷强化钢组织与力学性能的影响[J]. 材料导报, 2023, 37(3): 21080047-6.
[8] 闫丹丹, 单忠德, 臧勇. 多材质混合砂型性能及其对A356铝合金凝固组织的影响研究[J]. 材料导报, 2023, 37(1): 21080212-5.
[9] 阎亚雯, 余竹焕, 高炜, 费祯宝, 刘旭亮, 王晓慧. 共晶高熵合金力学性能的研究进展[J]. 材料导报, 2022, 36(Z1): 21050264-7.
[10] 郭瑞琪, 王秀琦, 刘国怀, 李天瑞, 王昭东. Ti-44Al-5Nb-1Mo-(V,B)合金热变形过程中的相变、再结晶行为及组织调控[J]. 材料导报, 2022, 36(Z1): 22010111-6.
[11] 史天宇, 孔维雄, 陈雨琳, 宁保群, 董治中. 新型高氮马氏体耐热铸钢的热处理及相变解析[J]. 材料导报, 2022, 36(Z1): 20120084-6.
[12] 李伟, 曹睿, 闫英杰. 不同热处理态下粉末冶金花纹钢的组织性能及拉伸断裂行为[J]. 材料导报, 2022, 36(9): 21020104-7.
[13] 付兵, 项利, 乔家龙, 刘静, 仇圣桃. 薄板坯连铸连轧流程制备低温Hi-B钢织构的演变及Goss晶粒的发展[J]. 材料导报, 2022, 36(9): 20120130-8.
[14] 郑皓天, 王子龙, 李翔. 基于纳米晶结构的非晶合金成分设计[J]. 材料导报, 2022, 36(7): 20090031-7.
[15] 汪勇, 李光强, 刘玉龙, 高洋, 郭小龙, 朱诚意. Nb微合金化对取向硅钢常化板中析出物特征及组织和织构的影响[J]. 材料导报, 2022, 36(7): 20110126-6.
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[3] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[4] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[5] Yingke WU,Jianzhong MA,Yan BAO. Advances in Interfacial Interaction Within Polymer Matrix Nanocomposites[J]. Materials Reports, 2018, 32(3): 434 -442 .
[6] Zhengrong FU,Xiuchang WANG,Qinglin JIN,Jun TAN. A Review of the Preparation Techniques for Porous Amorphous Alloys and Their Composites[J]. Materials Reports, 2018, 32(3): 473 -482 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅡ: Durability and Life Prediction Model[J]. Materials Reports, 2018, 32(3): 496 -502 .
[8] Lixiong GAO,Ruqian DING,Yan YAO,Hui RONG,Hailiang WANG,Lei ZHANG. Microbial-induced Corrosion of Concrete: Mechanism, Influencing Factors,Evaluation Indices, and Proventive Techniques[J]. Materials Reports, 2018, 32(3): 503 -509 .
[9] Ningning HE,Chenxi HOU,Xiaoyan SHU,Dengsheng MA,Xirui LU. Application of SHS Technique for the High-level Radioactive Waste Disposal[J]. Materials Reports, 2018, 32(3): 510 -514 .
[10] Haoran CHEN, Yingdong XIA, Yonghua CHEN, Wei HUANG. Low-dimensional Perovskites: a Novel Candidate Light-harvesting Material for Solar Cells that Combines High Efficiency and Stability[J]. Materials Reports, 2018, 32(1): 1 -11 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed