材料导报 2022, Vol. 36 Issue (Z1): 21120203-9
金属与金属基复合材料
|
不锈钢基超疏水表面的研究现状及发展趋势
杨喜臻1 , 宋原吉2 , 于思荣2 , 王康2 , 王珺2
1 长春大学理学院,长春 130022 2 中国石油大学(华东)材料科学与工程学院,山东 青岛 266580
Research Status and Development Trend of Superhydrophobic Surface on Stainless Steel
YANG Xizhen1 , SONG Yuanji2 , YU Sirong2 , WANG Kang2 , WANG Jun2
1 School of Science, Changchun University, Changchun 130022, China 2 School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
摘要 随着人们对不锈钢材料性能的要求越来越高,在不锈钢基体上制备具有特殊润湿性的表面成为研究热点之一。本文简要介绍了超疏水表面的相关理论,综述了近些年在不锈钢表面获得超疏水性能的多种方法,如电沉积法、化学沉积法、水热法、刻蚀法、溶胶-凝胶法、喷涂法等,对不同方法具有的优势及局限性进行了讨论,提出了不锈钢基超疏水表面目前存在的问题与解决思路,对其在多功能、高稳定性、更绿色环保的发展趋势进行了展望,希望为不锈钢基超疏水表面的研究与发展提供参考。
关键词:
不锈钢基体
超疏水性
制备工艺
机械稳定性
自修复性
Abstract: With the increasing demand for the performance of stainless steel materials, the preparation of surface with special wettability on stainless steel substrate has become one of the research hotspots.This paper briefly introduces the related theories of superhydrophobic surface and summarized several methods to obtain superhydrophobic properties on stainless steel surface in recent years, such as electrodeposition, chemical deposition, hydrothermal method, etching method, sol-gel method, spraying method, etc. The advantages and limitations of different methods are discussed, and the existing problems and solutions of stainless steel-based superhydrophobic surface are presented. The development trend of stainless steel-based superhydrophobic surface towards multifunction, high stability, and greener environmental protection is prospected, hoping to provide reference for future research and development of stainless steel-based superhydrophobic surface.
Key words:
stainless steel substrate
superhydrophobicity
preparation process
mechanical stability
self-healing
出版日期: 2022-06-05
发布日期: 2022-06-08
基金资助: 吉林省发展改革委员会项目(2021C039-5)
通讯作者:
yusr@upc.edu.cn
作者简介: 杨喜臻,长春大学理学院材料加工工程研究员,硕士研究生导师。1990年7月、2004年6月分别在东北师范大学、吉林大学获得学士学位、硕士学位,2009年获得吉林大学材料加工工程学科博士学位。目前从事金属材料表面改性方面的研究工作。发表论文10多篇,包括Materials Research Bulletin、Acta Physica Polonica A 等。 于思荣,中国石油大学(华东)材料科学与工程学院教授、博士研究生导师,享受国务院政府特殊津贴。1986年于吉林工业大学铸造专业本科毕业,1989年于吉林工业大学铸造专业硕士毕业,1996年于哈尔滨工业大学铸造专业博士毕业。目前主要从事金属基复合材料、表面工程及摩擦学等方面的研究工作。发表学术论文370余篇,授权国家发明专利29件。
引用本文:
杨喜臻, 宋原吉, 于思荣, 王康, 王珺. 不锈钢基超疏水表面的研究现状及发展趋势[J]. 材料导报, 2022, 36(Z1): 21120203-9.
YANG Xizhen, SONG Yuanji, YU Sirong, WANG Kang, WANG Jun. Research Status and Development Trend of Superhydrophobic Surface on Stainless Steel. Materials Reports, 2022, 36(Z1): 21120203-9.
链接本文:
http://www.mater-rep.com/CN/
或
http://www.mater-rep.com/CN/Y2022/V36/IZ1/21120203
1 白鹤, 王伯健.特殊钢, 2009, 30(2), 30. 2 赵振业, 李春志, 李志, 等.中国有色金属学报, 2004, 14(S1), 202. 3 Wang Y, Tang Z, Lu S, et al. Holzforschung , 2020, 74(8), 799. 4 陈和平, 郭乐凡, 曾跃兵, 等.纺织科学与工程学报, 2021, 38(3), 30. 5 Li X, Yin S, Huang S, et al. Vacuum , 2020, 173, 109172. 6 Chen J, Chen J, Li L, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects , 2021, 630, 127552. 7 Wang C, Guo J, Yu H, et al. Ceramics International , 2021, 47(22), 32456. 8 翟广坤, 李曙林, 陈素素, 等.工程科学学报, 2018, 40(7), 864. 9 王军军, 王贤明, 吴连锋, 等.化学通报, 2021, 84(6), 515. 10 冯放, 沈虎, 赵宏伟, 等.工程热物理学报, 2021, 42(5), 1168. 11 王霞, 王辉, 侯丽, 等.材料工程, 2020, 48(6), 73. 12 Qian H, Xu D, Du C, et al. Journal of Materials Chemistry A , 2017, 5(5), 2355. 13 Zang D, Zhu R, Wu C, et al. Scripta Materialia , 2013, 69(8), 614. 14 任刘珍, 胡海豹, 宋保维, 等.数字海洋与水下攻防, 2021, 3(3), 204. 15 赵一鸣, 汪怀远, 陶瑞丰, 等.化学工程师, 2018, 32(3), 33. 16 王争闯, 张芳芳, 张亚楠, 等.平顶山学院学报, 2013, 28(5), 61. 17 Callies M, Quere D. Soft Matter , 2005, 1(1), 55. 18 Barthlott W, Neinhuis C. Planta , 1997, 202(1), 1. 19 Guo Z, Zhou F, Hao J, et al. Journal of Colloid and Interface Science , 2006, 303(1), 298. 20 刘双平, 俞熹.大学物理, 2011, 30(9), 50. 21 高雪峰, 江雷.物理, 2006, 35(7), 559. 22 胡锦辉. 316L 不锈钢超疏水表面的制备及性能研究.硕士学位论文, 中国石油大学(华东), 2019. 23 Young T III. Philosophical Transactions of the Royal Society of London , 1805, 95, 65. 24 Kijlstra J, Reihs K. Colloids and Surfaces A, Physicochemical and Engineering Aspects , 2002, 206(1-3), 521. 25 Wenzel R N. Industrial & Engineering Chemistry , 1936, 28(8), 988. 26 Cassie A B D, Baxter S. Transactions of the Faraday Society , 1944, 40, 546. 27 Patankar N A. Langmuir , 2004, 20(19), 8209. 28 Liu T, Yin Y, Chen S, et al. Electrochimica Acta , 2007, 52(11), 3709. 29 Bartell F E, Shepard J W. The Journal of Physical Chemistry , 1953, 57(2), 211. 30 蒋斌, 曾利兰, 梁涛, 等.中国腐蚀与防护学报, 2018, 38(5), 438. 31 周通, 陈晶晶, 涂春朝, 等.化工学报, 2021, 72(7), 3814. 32 Isimjan T T, Wang T, Rohani S. Chemical Engineering Journal , 2012, 210, 182. 33 Huang L, Song J, Lu Y, et al. Micro & Nano Letters , 2017, 12(2), 76. 34 Laudise R A, Nielsen J W. Solid State Physics, 1961, 12, 149. 35 徐姝颖, 赵莹莹, 宋秋实, 等.人工晶体学报, 2018, 47(8),1560. 36 Wang K, Yu S, Yin X, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects , 2021, 633, 127871. 37 Garcia-Giron A, Romano J M, Liang Y, et al. Applied Surface Science , 2018, 439, 516. 38 Kim J H, Mirzaei A, Kim H W, et al. Applied Surface Science , 2018, 439, 598. 39 Fu T, Wen C S, Lu J, et al. Vacuum , 2012, 86(9), 1402. 40 尹成勇, 李澄, 彭晓燕, 等. 中国腐蚀与防护学报, 2014, 34(3), 257. 41 余俊. 超疏水不锈钢网的制备及其油水分离的应用研究.硕士学位论文, 武汉工程大学, 2018. 42 刘涛. 不锈钢超疏水表面制备及其防冰性能研究.硕士学位论文, 南昌航空大学, 2017. 43 Guo D, Hou K, Xu S, et al. Journal of Materials Science , 2018, 53(9), 6403. 44 Li H, Yu S, Han X. Chemical Engineering Journal , 2016, 283, 1443. 45 Lee M W, An S, Latthe S S, et al. ACS Applied Materials & Interfaces , 2013, 5(21), 10597. 46 田光远. 铝基与不锈钢基超疏水表面制备技术研究.硕士学位论文, 哈尔滨工业大学, 2014. 47 赵欢. 不锈钢超疏水性表面的制备及性能研究.硕士学位论文, 山东科技大学, 2017. 48 Tang Y, Yang J, Yin L, et al. Colloids and Surfaces A:Physicochemical and Engineering Aspects , 2014, 459, 261. 49 Yin X, Yu S, Wang K, et al. Chemical Engineering Journal , 2020, 394, 124925. 50 Yin X, Yu S, Wang L, et al. Separation and Purification Technology , 2020, 234, 116126. 51 盛宇, 徐丽慧, 孟云, 等.纺织学报, 2019, 40(7), 90. 52 Wu W, Wang X, Liu X, et al. ACS Applied Materials & Interfaces , 2009, 1(8), 1656. 53 Zhang L, Xue C H, Cao M, et al. Chemical Engineering Journal , 2017, 320, 244.
[1]
Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2 /C Composite Materials [J]. Materials Reports, 2018, 32(3): 357
-361
.
[2]
Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts [J]. Materials Reports, 2018, 32(3): 362
-367
.
[3]
Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials [J]. Materials Reports, 2018, 32(3): 384
-390
.
[4]
Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review [J]. Materials Reports, 2018, 32(3): 412
-417
.
[5]
Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application [J]. Materials Reports, 2018, 32(1): 102
-109
.
[6]
Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials [J]. Materials Reports, 2018, 32(1): 116
-121
.
[7]
Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries [J]. Materials Reports, 2018, 32(1): 12
-33
.
[8]
Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding [J]. Materials Reports, 2018, 32(1): 128
-134
.
[9]
Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles [J]. Materials Reports, 2018, 32(1): 41
-46
.
[10]
Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials [J]. Materials Reports, 2018, 32(1): 76
-85
.
Viewed
Full text
Abstract
Cited
Shared
Discussed