Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (2): 333-336    https://doi.org/10.11896/j.issn.1005-023X.2018.02.034
  物理   计算模拟 |材料 |
Si/Ti掺杂对AlCrCoFeNiMoTixSiy高熵合金力学性能影响的
第一性原理计算
2关键词 第一性原理 高熵合金 Si/Ti掺杂 力学性能
下载:  全 文 ( PDF ) ( 1599KB ) 
输出:  BibTeX | EndNote (RIS)      
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
第一性原理计算
               出版日期:  2018-01-25      发布日期:  2018-01-25
ZTFLH:  TG146.2+2  
基金资助: 山西省教育厅材料科学与工程重点扶持学科资助项目(2016-6);山西省青年科技研究基金面上项目(201601D202028);太原工业学院青年学术带头人支持计划(2016)
引用本文:    
第一性原理计算. Si/Ti掺杂对AlCrCoFeNiMoTixSiy高熵合金力学性能影响的[J]. 《材料导报》期刊社, 2018, 32(2): 333-336.
. . Materials Reports, 2018, 32(2): 333-336.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.02.034  或          http://www.mater-rep.com/CN/Y2018/V32/I2/333
Sample Al Cr Co Fe Ni Mo Ti Si
AlCrCoFeNiMoSi 1 1 1 1 1 1 0 1
AlCrCoFeNiMo-
Ti0.25Si0.75
1 1 1 1 1 1 0.25 0.75
AlCrCoFeNiMo-
Ti0.5Si0.5
1 1 1 1 1 1 0.5 0.5
AlCrCoFeNiMo-
Ti0.75Si0.25
1 1 1 1 1 1 0.75 0.25
AlCrCoFeNiMoTi 1 1 1 1 1 1 1 0
表1  高熵合金成分设计
Lattice
constant
nm
Density
g/cm3
Cohesive
energy
eV/atom
AlCrCoFeNiMoSi 0.279 3 8.197 3 -123.80
AlCrCoFeNiMoTi0.25Si0.75 0.279 9 8.254 1 -129.77
AlCrCoFeNiMoTi0.5Si0.5 0.279 9 8.361 2 -139.64
AlCrCoFeNiMoTi0.75Si0.25 0.280 4 8.423 0 -152.87
AlCrCoFeNiMoTi 0.279 0 8.661 1 -169.98
表2  高熵合金晶格参数、密度以及结合能
C11/GPa C12/GPa C44/GPa
AlCrCoFeNiMoSi 73.32 119.30 87.20
AlCrCoFeNiMoTi0.25Si0.75 79.48 121.79 92.10
AlCrCoFeNiMoTi0.5Si0.5 96.58 125.02 103.48
AlCrCoFeNiMoTi0.75Si0.25 88.20 122.80 104.27
AlCrCoFeNiMoTi 88.86 134.91 114.61
表3  高熵合金弹性常数Cij
E/GPa G/GPa B/GPa G/B ν
AlCrCoFeNiMoSi -74.46 -25.98 103.98 -0.25 0.62
AlCrCoFeNiMoTi0.25Si0.75 -67.91 -16.94 107.69 -0.16 0.61
AlCrCoFeNiMoTi0.5Si0.5 -44.48 5.82 115.54 0.05 0.56
AlCrCoFeNiMoTi0.75Si0.25 -54.74 -0.97 111.27 -0.01 0.58
AlCrCoFeNiMoTi -73.82 -11.42 119.56 -0.10 0.60
表4  高熵合金的杨氏模量E、剪切模量G、体积模量B、G/B和泊松比ν
AlCrCoFeNiMoTixSiy
x=0,
y=1
x=0.25,
y=0.75
x=0.5,
y=0.5
x=0.75,
y=0.25
x=1,
y=0
Average
hardness
The original sample after melting 41.5 45.5 47.0 46.4 45.6 45.2
Annealed sample 50.5 52.0 48.6 52.5 51.5 51
表5  高熵合金硬度测试结果(HRC)
图1  熔炼后高熵合金杨氏模量E、剪切模量G、泊松比v及洛氏硬度
图2  熔炼后AlCrCoFeNiMoTixSiy高熵合金的微观组织: (a)x=0,y=1;(b)x=0.25,y=0.75;(c)x=0.5,y=0.5;(d)x=0.75,y=0.25;(e)x=1,y=0
1 Zhou Y J, Zhang Y, Wang Y L , et al. Microstructure characterization of Alx(TiVCrMnFeCoNiCu)100-x high-entropy alloy system with multi-principal elements[J]. Rare Metal Materials and Engineering, 2007,36(12):2136(in Chinese).
2 周云军, 张勇, 王艳丽 , 等. 多组元Alx(TiVCrMnFeCoNiCu)100-x高熵合金系微观组织研究[J]. 稀有金属材料与工程, 2007,36(12):2136.
3 Li K . Microstructure and hydrogen storage properties of the lightweight and containing magnesium high entropy alloys[D]. Lanzhou: Lanzhou University of Technology, 2013(in Chinese).
4 李凯 . 轻质及含镁高熵合金的微观组织及储氢性能研究[D]. 兰州:兰州理工大学, 2013.
5 Yang X, Zhang Y, Liaw P K . Microstructure and compressive pro-perties of NbTiVTaAlx high entropy alloys[J]. Procedia Enginee-ring, 2012,36(6):292.
6 Yu Y, Xie F Q, Zhang T B , et al. Microstructure control and corrosion properties of AlCoCrFeNiTi0.5 high-entropy alloy[J]. Rare Metal Materials and Engineering, 2012,41(5):862(in Chinese).
7 于源, 谢发勤, 张铁邦 , 等. AlCoCrFeNiTi0.5高熵合金的组织控制和腐蚀性能[J]. 稀有金属材料与工程, 2012,41(5):862.
8 Varalakshmi S, Kamaraj M, Murty B S . Synjournal and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying[J]. Journal of Alloys and Compounds, 2008,460(1-2):253.
9 Wu J M, Lin S J, Yeh J W , et al. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content[J]. Wear, 2006,261(5-6):513.
10 7 Yang J Y,Zhou Y J,Zhang Y,et al. Research progress of high-entropy alloys with multiprincipal components[J].Chinese Materials Science Technology and Equipment, 2007(6):16(in Chinese).
11 阳隽觎, 周云军, 张勇 , 等. 多组元高熵合金的研究现状及前景展望[J].中国材料科技与制备, 2007(6):16.
12 Zhang Y, Zuo T T, Tang Z , et al. Microstructures and properties of high-entropy alloys[J]. Progress in Materials Science, 2014,61(8):1.
13 Yang X M . First-principles study on structure and properties of Mg-Al based strengthening phase and solid solution[D]. Taiyuan: North University of China, 2014(in Chinese).
14 杨晓敏 . Mg-Al基强化相及固溶体结构和性能的第一性原理研究[D]. 太原:中北大学, 2014.
15 Ju S P, Huang H H, Wu T Y , et al. Investigation of the local structural rearrangement of Mg67Zn28Ca5 bulk metallic glasses during tensile deformation:A molecular dynamics study[J]. Computational Materials Science, 2015,96:56.
16 Jung G S, Zhao Q, Buehler M J . Molecular mechanics of polycrystalline graphene with enhanced fracture toughness[J]. Extreme Mechanics Letters, 2015,2(1):52.
17 Hizhnyakov V, Haas M , Shelkan, et al. Theory and MD simulations of intrinsic localized modes and defect formation in solids[J]. Physica Scripta, 2013,89(4):044003.
18 Wang L X, Yao S, Wen B . First-principle studies of AlCoCrCuxFeNi high entropy alloys with different mole fractions of Cu[J]. Materials Review, 2014,28(s2):159(in Chinese).
19 王兰馨, 姚山, 温斌 . 第一性原理计算Fe元素含量对高熵合金AlCoCrCuFexNi的影响[J]. 材料导报, 2014,28(专辑24):159.
20 Qiu Y, Wang H P, Kong Y , et al. Progress in first-principles calculations and experimental observations of the interface in cemented carbides[J]. Materials Review A: Review Papers, 2016,30(5):136(in Chinese).
21 邱玥, 王辉平, 孔毅 , 等. 硬质合金界面的实验观测与第一性原理计算研究进展[J]. 材料导报:综述篇, 2016,30(5):136.
22 Jiang Y . First principles computation methods and applications for metal/metal-oxide interfaces[J]. Chinese Journal of Nature, 2015,37(4):261(in Chinese).
23 江勇 . 金属与金属氧化物界面第一性原理计算研究方法及其应用[J]. 自然杂志, 2015,37(4):261.
24 Wang C Y, Wang Z Q, Meng Q Y . Comparative study of the first-principles and empirical potential simulation of vacancies in silicon[J]. Acta Physica Sinica, 2010,59(5):3370(in Chinese).
25 王超营, 王振清, 孟庆元 . 空位的第一性原理及经验势函数的对比研究[J]. 物理学报, 2010,59(5):3370.
26 Li Y, Zhang W P, Yang Q . The first principles calculation of cubic boron nitride electronic structure and optical properties[J]. Materials Review, 2011,25(s2):251(in Chinese).
27 李耀, 张卫平, 杨强 . 立方氮化硼电子结构和光学性质的第一性原理计算[J]. 材料导报, 2011,25(专辑18):251.
28 Han P D, Bai J G, Li H F . First principle investigation on the alloying effect and Mg/Li interface structure[J]. Journal of Taiyuan University of Technology, 2012,43(3):251(in Chinese).
29 韩培德, 白晋纲, 李洪飞 . Mg-Li合金界面结构及合金化效应的第一性原理研究[J]. 太原理工大学学报, 2012,43(3):251.
30 Nakamura K, Ohnuma T, Ogata T . First-principles study of structure,vacancy formation,and strength of bcc Fe/V4C3 interface[J]. Journal of Materials Science, 2011,46(12):4206.
31 Fang L H, Wang L, Gong J H , et al. First-principles study of bulk and (001) surface of TiC[J]. Transactions of Nonferrous Metals Society of China, 2010,20(5):857.
32 Fang C M, Van Huis M A, Sluiter M H F , et al. Stability,structure and electronic properties of γ-Fe23C6 from first-principles theory[J]. Acta Materialia, 2010,58(8):2968.
33 Fu C L, Wang X, Ye Y Y , et al. Phase stability, bonding mechanism,and elastic constants of Mo5Si3 by first-principles calculation[J]. Intermetallics, 1999,7(2):179.
34 Gao L, Zhou J, Sun Z M , et al. First-principles calculations of the β-Mg7Gd precipitate in Mg-Gd binary alloys[J]. Chinese Science Bulletin, 2011,56(11):1142.
35 4 Mattesini M, Ahuja R, Johansson B . Cubic Hf3N4 and Zr3N4: A class of hard materials[J]. Physical Review B, 2003,68(18):184108.
[1] 程鹏, 陈云贵, 丁武成, 王春明. 热挤压Mg-3Sn-1Zn-xCu合金的显微组织与力学性能[J]. 材料导报, 2018, 32(20): 3562-3565.
[2] 唐昌平, 左国良, 刘文辉, 朱美韵, 李志云, 李权, 刘筱, 卢立伟. 挤压-T5态Mg-8Gd-4Y-Nd-Zr合金的动态冲击行为[J]. 《材料导报》期刊社, 2018, 32(14): 2437-2441.
[3] 袁秋红,周国华,廖 琳. 石墨烯纳米片/AZ91镁基复合材料的显微组织与力学性能[J]. 《材料导报》期刊社, 2018, 32(10): 1663-1667.
[4] 徐志超, 冯中学, 史庆南, 杨应湘, 王效琪, 起华荣. 定向凝固制备Mg98.5Zn0.5Y1合金中LPSO相的结构及其对合金电磁屏蔽性能的影响[J]. 材料导报, 2018, 32(6): 865-869.
[5] 徐志超, 冯中学, 史庆南, 杨应湘. Mg-Zn-Y合金中14H-LPSO相与W相的电子结构与弹性性能的第一性原理计算[J]. 材料导报, 2018, 32(6): 1026-1031.
[6] 唐昌平, 李国栋, 李志云, 孙玹琪. 铸造Mg-Gd-Y-Nd-Zr合金在时效过程中的组织与性能演变[J]. 《材料导报》期刊社, 2018, 32(4): 574-578.
[7] 朱利敏, 李全安. Mg-8.08Gd-2.41Sm-0.3Zr合金热压缩变形及热加工图[J]. 《材料导报》期刊社, 2018, 32(4): 593-597.
[8] 孙翠翠, 周吉学, 赵东清, 马百常, 杨院生. Sn对镁及镁合金显微组织和性能影响的研究现状及展望*[J]. 《材料导报》期刊社, 2017, 31(19): 60-65.
[9] 董鹏, 陈鼎, 陈振华, 章凯. 新型Mg-8Li-5Al-5Ca合金的微观组织、力学及耐腐蚀性能*[J]. 《材料导报》期刊社, 2017, 31(18): 64-71.
[10] 唐昌平, 李国栋, 刘文辉, 陈宇强, 刘筱, 李方伟. 析出相对Mg-Gd-Y-Nd-Zr合金室温压缩行为的影响*[J]. 《材料导报》期刊社, 2017, 31(16): 103-106.
[11] 蒲治军,陈东杰,张奎,李兴刚,李永军,马鸣龙,石国梁,袁家伟,李蒙. 关于镁合金中长周期有序结构的研究综述*[J]. 《材料导报》期刊社, 2017, 31(7): 79-82.
[12] 叶俊华,汤爱涛,马仕达,陈巧旺,王玉容,徐安莲. 搅拌摩擦焊接Mg-6Al-1Sn合金组织与性能研究*[J]. 材料导报编辑部, 2017, 31(22): 79-84.
[13] 彭鹏, 汤爱涛, 佘加, 周世博, 潘复生. 超细晶镁合金的研究现状及展望[J]. 材料导报, 2019, 33(9): 1526-1534.
[14] 蒙毅, 杨越, 曹雷刚, 孙健, 张海涛, 崔建忠. Al含量对Mg-Al亚共晶合金热收缩行为的影响[J]. 材料导报, 2018, 32(18): 3185-3189.
[15] 唐昌平, 左国良, 李志云, 孙玹琪, 李权. Mg-Gd系合金的合金化研究进展[J]. 材料导报, 2018, 32(21): 3760-3767.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed