Microstructure and Mechanical Property Evolution of Mg-Gd-Y-Nd-Zr Casting Alloy During Aging Treatment
TANG Changping1, 2, LI Guodong3, LI Zhiyun4, SUN Xuanqi4
1 School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan 411201; 2 High Temperature Wear Resistant Materials and Preparation Technology of Hunan Province National Defence Science and Technology Laboratory, Xiangtan 411201; 3 Equipment Management Department, Suzhou Nuclear Power Research Institute Company Limited, Shenzhen, 518124; 4 Science and Technology Company Limited of No. 608 Research Institute, Zhuzhou, 412002
Abstract: Microstructure and mechanical property evolution of Mg-Gd-Y-Nd-Zr casting alloy during aging treatment were investigated by means of optical microscopy (OM), hardness testing, uniaxial tensile testing, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). The results indicated that the alloy exhibited good ductility and low strength after solution treatment, and the elongation exceeded 10%. As the aging time prolonged, the strength increased while the ductility decreased. The sample was in under-aged state when treated at 225 ℃ for 3 h, and β″was the main strengthening phase, which was coherent with the matrix. The fracture surface of the sample featured cleavage planes, dimples, tea-ring ridges and grain boundaries. In the peak-aged state, the strengthening phase was β', which is semi-coherent with the matrix. The ultimate tensile strength of the peak-aged sample exceeded 300 MPa, while the ductility decreased sharply. The fracture surface of the sample featured cleavage planes, tearing ridges and grain boundaries. The proportion of cleavage planes was obviously higher than that in under-aged sample, and the cleavage plane and the grain boundary were smooth. The strength increased but the ductility decreased when the sample was over-aged. Grain boundaries and cleavage planes were the main characterization of the fracture surface.
1 Zhang X M, Peng Z K, Chen J M, et al. Heat-resistant magnesium alloys and their development[J].The Chinese Journal of Nonferrous Me-tals,2004,14(9):1443(in Chinese). 张新明,彭卓凯,陈健美,等.耐热镁合金及其研究进展[J].中国有色金属学报,2004,14(9):1443. 2 Wu G H, Chen Y S, Ding W J. Current research, application and future prospect of magnesium alloys in aerospace industry[J].Manned Spaceflight,2016,22(3):281(in Chinese). 吴国华,陈玉狮,丁文江.镁合金在航空航天领域研究应用现状与展望[J].载人航天,2016,22(3):281. 3 Chen Q W, Tang A T, Xu T Y, et al. High performance cast magne-sium rare-earth alloys: retrospect and prospect[J].Materials Review A:Review Papers,2016,30(9):1(in Chinese). 陈巧旺,汤爱涛,许婷熠,等.高性能铸造稀土镁合金的发展[J].材料导报:综述篇,2016,30(9):1. 4 Zhang D F, Zhang H J, Lan W, et al. Some research progress of high-strength magnesium alloys[J].Transactions of Materials and Heat Treatment,2016,33(6):1(in Chinese). 张丁非,张红菊,兰伟,等.高强镁合金的研究进展[J].材料热处理学报,2016,33(6):1. 5 Rokhlin L L. Magnesium alloys containing rare earth metals: structure and properties[M].London:Taylor & Francis,2003. 6 Friedrich H E, Mordike B L. Magnesium technology: metallurgy, design data, applications[M].Berlin:Springer,2006. 7 Czerwinski F, Trojanova Z, Szaraz Z, et al. Magnesium alloys—Design, processing and properties[M].Rijeka,Croatia:InTech,2011. 8 Honma T, Ohkubo T, Kamado S, et al. Effect of Zn additions on the age-hardening of Mg-2.0Gd-1.2Y-0.2Zr alloys[J].Acta Materialia,2007,55(12):4137. 9 Xu C, Zheng M Y, Chi Y Q, et al. Microstructure and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy fabricated by semi-continuous casting[J].Materials Science and Engineering:A,2012,549:128. 10 Zhang S, Liu W C, Gu X Y, et al. Effect of solid solution and aging treatments on the microstructures evolution and mechanical properties of Mg-14Gd-3Y-1.8Zn-0.5Zr alloy[J].Journal of Alloys and Compounds,2013,557(1):91. 11 Wu Y J, Xu C, Zheng F Y, et al. Formation and characterization of microstructure of as-cast Mg-6Gd-4Y-xZn-0.5Zr (x=0.3, 0.5 and 0.7 wt.%) alloys[J].Materials Characterization,2013,79:93. 12 Jafari Nodooshan H R, Liu W C, Wu G H, et al. Microstructure cha-racterization and high-temperature shear strength of the Mg-10Gd-3Y-1.2Zn-0.5Zr alloy in the as-cast and aged conditions[J].Journal of Alloys and Compounds,2015,619:826. 13 Chen J, Wang Q D, Zhao Z, et al. Microstructure and mechanical pro-perties of Mg-8.5Gd-2.0Y-1.0Ag-0.4Zr alloy with high strength and ductility[J].High Technology Letters,2010,20(4):427(in Chinese). 陈杰,王渠东,赵政,等.高强高韧Mg-8.5Gd-2.0Y-1.0Ag-0.4Zr合金的组织与性能[J].高技术通讯,2010,20(4):427. 14 Wang Q D, Chen J, Zhao Z, et al. Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy[J].Materials Science and Engineering: A,2010,528(1):323. 15 Tang C P, Liu W H, Chen Y Q, et al. Effects of thermal treatment on microstructure and mechanical properties of a Mg-Gd-based alloy plate[J].Materials Science and Engineering:A,2016,659:63.