Effect of PANI/SiO2 Particle Size on Anti-corrosion Properties of Epoxy Coating
FENG Jiangbo1, WANG Jingping1, YUAN Huiying2, REN Qinbo1, CAO Jin'an1, WANG Xuechuan3
1 College of Chemistry and Chemical Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China 2 Oil and Gas Technology Research Institute of Changqing Oilfield Company, Xi'an 710018, China 3 College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
Abstract: Silicon dioxide (SiO2) particles with different sizes were coated by polyaniline (PANI) using in-situ polymerization and then the appearance of SiO2 changed from white to dark green. The results of FTIR showed that PANI had coated on the surface of SiO2 particles. The coating rate of PANI was studied by thermogravimetry and the results showed that the coating rate increased with the decrease of SiO2 particle size. The PANI coating rate of 1 250 meshes SiO2 particles reached 1.76% (mass fraction, the same below). Anti-corrosion coating was prepared by adding PANI/SiO2 particles into the epoxy resin matrix. It was found that the particle size of PANI/SiO2 has an important influence on the mechanical and anti-corrosion properties of the coating. With the increase of particle size, the adhesion, impact resistance and wear resistance of the coating increased but the hardness of the coating decreased. The structure of coating by adding 400 meshes PANI/SiO2 particles was compact and this coating still showed good anti-corrosion properties immersing in 3.5% NaCl solution after 30 days, which should be related to the PANI passivation to metal.
1 Guo J L, Guo W Y, X R J, et al. Journal of Functional Materials, 2010, 41(S1), 20.
2 Thomas C, Borges P H R, Panzera T H, et al. Composites Part B, Engineering, 2014, 59, 260.
3 Zhen G, Wen G Z, Chao H, et al. Materials, 2018, 11(6), 932.
4 Yu K S, Yang J,Wang H H. Fine Chemicals, 2016, 33(10), 1176(in Chinese).
于凯烁, 杨军, 王海花.精细化工, 2016, 33(10), 1176.
5 Zhao Y T, Rao Q H, Zhang H L. Thermosetting Resin, 2017, 32(2), 48(in Chinese).
赵宇泰, 饶秋华, 张海浪.热固性树脂, 2017, 32(2), 48.
6 Li C W. Guangdong Chemical Industry, 2017, 044(21), 97(in Chinese).
李蔡伟.广东化工, 2017, 044(21), 97.
7 Wessling B. Mater Corrosion, 1996, 47, 439.
8 Deberry D W. Journal of the Electronchem Society, 1985, 132, 102.
9 Sun Y,Zhong F C, Shu Y J, et al. Materials Reports A: Review Papers, 2009(7), 65(in Chinese).
孙毅, 钟发春, 舒远杰, 等.材料导报:综述篇, 2009(7), 65.
10 Tunc T. Progress in Organic Coatings, 2005, 55(1),60.
11 Song H, Wang H, Qian C. Electroplating & Finishing, 2018, 37(2), 54(in Chinese).
宋航,王华,钱晨.电镀与涂饰, 2018, 37(2), 54.
12 Grgur B N, Gvozdenović M M, MićKović-Stanković V B, et al.Progress in Organic Coatings, 2006, 56(2-3), 214.
13 Gao H F, Zhang S T, Liu T, et al. Corrosion and Protection, 2009, 30(4), 267(in Chinese).
高焕方, 张胜涛, 刘通,等.腐蚀与防护, 2009, 30(4),267.
14 Zhang S, Zhou L N, Jian L, et al. Journal of Chinese Society for Corrosion and Protection,2016(36), 66(in Chinese).
张山, 周丽娜, 简璐,等.中国腐蚀与防护学报, 2016(36), 66.
15 Wang S G, He Q, Si S H. Fine Chemicals, 2009, 26(8), 804(in Chinese).
王树国, 何秦, 司士辉.精细化工, 2009, 26(8), 804.
16 Saravanan K, Sathiyanarayanan S, Muralidharan S, et al. Progress in Organic Coatings, 2007, 59(2),160.
17 Reza N, Adib K S, Ghasem H M. Progress in Organic Coatings, 2018, 124, 110.
18 Jing X L, Wang Y Y, Zhang D H. Journal of Materials Engineering, 2004(1), 20(in Chinese).
井新利, 王杨勇, 张东华.材料工程, 2004(1), 20.
19 Wang L, Zhang Y H, Lan H D. Chemical Journal of Chinese Universities, 2019, 40(8),1562(in Chinese).
王琳, 张艳慧, 兰海蝶.高等学校化学学报, 2019, 40(8),1562.
20 Gao L, Miao Y, Zhang X H, et al. Chemical Journal of Chinese Universities, 2013, 34(12), 2845(in Chinese).
高磊, 廖奕, 张小华,等.高等学校化学学报, 2013, 34(12), 2845.
21 Li Z, Wang J J, Gao H T, et al. Chemical Journal of Chinese Universities, 2019, 40(8), 1784(in Chinese).
李泽, 王建江, 高海涛,等.高等学校化学学报, 2019, 40(8), 1784.
22 Ren W, Zhang G L, Yan H, et al. Chemical Journal of Chinese Universities, 2020, 41(4), 846(in Chinese).
任文, 张国立, 闫涵,等.高等学校化学学报, 2020, 41(4), 846.
23 Wang J T, Zhong Z M. Chemical Enterprise Management, 2018, 487(16), 50(in Chinese).
王俊婷, 钟志梅.化工管理, 2018, 487(16), 50.
24 Liu C, Wang S, Shi J, et al. Applied Surface Science, 2011, 258(2), 761.
25 Zhang P P, Huang L, Jin L, et al. Polymer Materials Science & Engineering, 2020, 36(1),111(in Chinese).
张盼盼, 黄惠, 金磊,等.高分子材料科学与工程, 2020, 36(1),111.
26 Ding L, Wang X, Gregory R V. Synthetic Metals, 1999, 104(2),73.
27 Seok K, In Jae C. Synthetic Metals, 1998, 97, 127.
28 Zeng X R, Gong K C. Synthetic Materials Aging and Application. 2001(4), 8(in Chinese).
曾幸荣, 龚克成.合成材料老化与应用, 2001(4),8.
29 Bao J J, Cheng X, He Q J. Polymer Materials Science & Engineering, 2004(5),121(in Chinese).
包建军, 成煦, 何其佳,等.高分子材料科学与工程, 2004(5),121.
30 Hao P, Yan L S, Dong J L. Paint & Coatings Industry, 2020(4),20(in Chinese).
郝朋, 闫林森, 东继莲.涂料工业, 2020(4),20.
31 Wang X M, Feng L Y, Guo C X. Modern Paint and Finishing, 2019(9),16(in Chinese).
王向梅, 冯立云, 郭彩霞.现代涂料与涂装, 2019(9),16.
32 Jiang X W, Zhu H Q, Ji G Z, et al. Engineering Plastics Application, 2007(8),13(in Chinese).
蒋学文, 朱红旗, 季根忠,等.工程塑料应用, 2007(8),13.
33 Wu B Z, Shen J P, Xu Q W, et al. Coatings Technology & Abstracts, 2017, 38(3),50(in Chinese).
吴丙照, 沈剑平, 许乾慰, 等.涂料技术与文摘, 2017, 38(3),50.
34 Park J H, Lee G D, Nishikata A, et al. Corr Sci, 2002, 44(5), 1087.
35 Tang Y, Zeng H, Li H Y. Surface Technology, 2020, 49(8), 275(in Chinese).
唐园, 曾皓, 黎红英, 等.表面技术, 2020, 49(8), 275.
36 Wang Y L. Progress in Organic Coatings, 2019, 137, 105327.
37 Wang Y L. Journal of the Taiwan Institute of Chemical Engineers, 2019, 103, 190.