Please wait a minute...
材料导报  2023, Vol. 37 Issue (19): 22030127-7    https://doi.org/10.11896/cldb.22030127
  高分子与聚合物基复合材料 |
FRP制孔分层形成机理及抑制工艺方法研究
石文天, 闫天明, 刘玉德, 李杰*, 王林, 庞庆超
北京工商大学人工智能学院,北京 100048
Study on the Delaminations Formation Mechanism and Inhibition Method of FRP Hole Machining
SHI Wentian, YAN Tianming, LIU Yude, LI Jie*, WANG Lin, PANG Qingchao
School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China
下载:  全 文 ( PDF ) ( 8223KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本文论述了钻削纤维增强复合材料(Fiber reinforced polymer,FRP)过程中产生分层的类型及形成机理;阐述了各种分层的有限元仿真分析和FRP制孔的试验研究进展,论述了超声振动辅助加工、磨料水射流加工、激光加工及水射流辅助激光加工技术对FRP制孔分层缺陷的抑制效果;分析了FRP钻削中刀具类型、工艺参数及辅助工艺对分层缺陷的影响;从特种加工工艺和传统工艺两种方法提出了分层缺陷抑制准则;最后总结了FRP制孔工艺研究存在的不足并展望了未来的发展。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
石文天
闫天明
刘玉德
李杰
王林
庞庆超
关键词:  FRP  钻削  分层  形成机理  抑制分层    
Abstract: The types and forming mechanism of delamination in the process of drilling FRP are discussed. The finite element simulation analysis of various delaminations and the experimental research progress of FRP hole machining are expounded. The effects of ultrasonic vibration assisted machining, abrasive water jet machining, laser machining and water jet assisted laser machining technologies on delamination defects in FRP hole machining are discussed. The effects of tool types, process parameters and auxiliary processes in FRP drilling on delamination defects are analyzed. The delamination defect suppression criterion is presented by two methods of traditional technology and non-traditional machining technology. Finally, the shortcomings and future prospects of FRP hole machining technology research are summarized.
Key words:  FRP    drilling    delamination    formation mechanism    inhibition delamination
出版日期:  2023-10-10      发布日期:  2023-09-28
ZTFLH:  TH16  
基金资助: 国家自然科学基金(51975006;51505006)
通讯作者:  *李杰,2012年12月取得大连海事大学工学博士学位。2013年9月就职于北京工商大学,现为北京工商大学人工智能学院硕士研究生导师、副教授。研究方向为机械制造技术、工程表面改性。发表论文30余篇,获批国家发明专利6项。 lijie0739@btbu.edu.cn   
作者简介:  石文天,2009年6月获北京理工大学工学博士学位,现为北京工商大学人工智能学院教授、硕士研究生导师。研究方向为微细切削加工和3D打印技术。主持国家自然科学基金项目2项,出版专著2 部,发表论文60余篇,其中被SCI/EI收录的论文30余篇,已授权发明专利10项,获中国循环经济协会科学技术一等奖。
引用本文:    
石文天, 闫天明, 刘玉德, 李杰, 王林, 庞庆超. FRP制孔分层形成机理及抑制工艺方法研究[J]. 材料导报, 2023, 37(19): 22030127-7.
SHI Wentian, YAN Tianming, LIU Yude, LI Jie, WANG Lin, PANG Qingchao. Study on the Delaminations Formation Mechanism and Inhibition Method of FRP Hole Machining. Materials Reports, 2023, 37(19): 22030127-7.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.22030127  或          http://www.mater-rep.com/CN/Y2023/V37/I19/22030127
1 Shetty N, Shahabaz S M, Sharma S S, et al. Composite Structures, 2017, 176, 790.
2 Cepero-Mejias F, Curiel-Sosa J L, Blazquez A, et al. Composite Structures, 2020, 240, 112006.
3 Basso I, Batista M F, Jasinevicius R G, et al. Composite Structures, 2019, 228, 111312.
4 Ismail S O, Ojo S O, Dhakal H N. Composites Part B-Engineering, 2017, 108, 45.
5 Tang W, Chen Y, Yang H, et al. Applied Composite Materials, 2018, 25(6), 1419.
6 Anand R S, Patra K. Cirp Journal of Manufacturing Science and Techno-logy, 2017, 16, 55.
7 Diaz-Alvarez A, Rodriguez-Millan M, Diaz-Alvarez J, et al. Composite Structures, 2018, 202, 1136.
8 Geng D, Liu Y, Shao Z, et al. Composite Structures, 2019, 216, 168.
9 Krishnadasan C K, Shanmugam N S, Rao B N, et al. Journal of Materials Engineering and Performance, 2021, 30(12), 9440.
10 Karatas M A, Gokkaya H. Defence Technology, 2018, 14, 318.
11 Saleem M, Toubal L, Zitoune R, et al. Composites Part A-Applied Science and Manufacturing, 2013, 55, 169.
12 Yang X F, Li Y S, Yan G H, et al. Manufacturing Technology and Machine Tools, 2014(12), 165(in Chinese).
杨小璠, 李友生, 鄢国洪, 等. 制造技术与机床, 2014(12), 165.
13 Xu W, Zhang L C, Wu Y. Composites Science and Technology, 2014, 92, 103.
14 Thakur R K, Singh K K, Ramkumar J. Materials Today-Proceedings, 2020, 33(8), 5653.
15 Khashaba U A, El-Sonbaty I A, Selmy A I, et al. Composites Part A-Applied Science and Manufacturing, 2010, 41(9), 1130.
16 Kumar D, Singh K K. Advanced Composite Materials, 2015, 241, 49.
17 Wang Q, Wu Y, Bitou T, et al. International Journal of Advanced Manufacturing Technology, 2018, 94(9-12), 4221.
18 Zhang Y, Liu D, Zhang W, et al. International Journal of Advanced Manufacturing Technology, 2022, 119, 41.
19 Chen S, Zou P, Mao L. Chinese Journal of Construction Machinery, 2018, 16(2), 125(in Chinese).
陈硕, 邹平, 毛亮. 中国工程机械学报, 2018, 16(2), 125.
20 Ning F, Wang H, Hu Y, et al. Procedia Manufacturing, 2017, 10, 557.
21 Shi W T, Liu H L, Zhang J B, et al. Chinese Plastics, 2013, 27(4), 71(in Chinese).
石文天, 刘汉良, 张加波, 等. 中国塑料, 2013, 27(4), 71.
22 Zhang Z, Zhang S, Zheng H, et al. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2020, 67, 2085.
23 Kumar M, Kumar P, Bhadauria S S. Polymer-Plastics Technology and Materials, 2020, 59(10), 1041.
24 Jain S, Yang D C H. Journal of Engineering for Industry, 1993, 115(4), 398.
25 Thakur A, Pal S A, Sharma M. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2021, 235(1SI), 136.
26 Xu W, Zhang L C. International Journal of Machine Tools & Manufacture, 2014, 80-81, 1.
27 Wang D, Jiao F. Journal of Mechanical Engineering, 2021, 57(3), 255(in Chinese).
王东, 焦锋. 机械工程学报, 2021, 57(3), 255.
28 Wang F, Zhao M, Yan J, et al. Materials, 2020, 13(23), 5457.
29 Shyha I, Soo S L, Aspinwall D, et al. Journal of Materials Processing Technology, 2010, 210(8), 1023.
30 Quan Y, Sun L. Manufacturing Engineering and Automation I, 2011, 139-141(1-3), 55.
31 Bonnet C, Benmohammed B, Poulachon G, et al. Modelling of Machining Operations, 2011, 223, 111.
32 Tsao C C, Hocheng H, Chen Y C. Cirp Annals-Manufacturing Technology, 2012, 61(1), 91.
33 Sapiai N, Jumahat A, Jawaid M, et al. Polymers, 2021, 13(18), 3032.
34 Wan M, Li S, Yuan H, et al. Composites Part A:Applied Science and Manufacturing, 2019, 117, 34.
35 Han D, Yang K, Meschut G. Journal of Materials Processing Technology, 2021, 296, 117182.
36 Qin X D, Li Y X, Wang B, et al. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(3), 472(in Chinese).
秦旭达, 李永行, 王斌, 等. 机械科学与技术, 2016, 35(3), 472.
37 Mathern A, Yang J. Materials, 2021, 14(3), 506.
38 Zhang H, An L B, Zhang Y X. Journal of Hefei University of Technology(Natural Science), 2019, 42(12), 1608(in Chinese).
张浩, 安立宝, 张迎信. 合肥工业大学学报(自然科学版), 2019, 42(12), 1608.
39 Lu M, Zhang C, Wang X X. Aeronautical Manufacturing Technology, 2018, 61(17), 85(in Chinese).
卢明, 张臣, 王晓雪. 航空制造技术, 2018, 61(17), 85.
40 Liu Z, Li Z, Huang C, et al. Mechanics of Advanced Materials and Structures, 2022, 29, 3646.
41 Ning F D, Cong W L, Pei Z J, et al. Ultrasonics, 2016, 66, 125.
42 Qiu J P, Chen J X, Hao H J. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(3), 484(in Chinese).
邱建平, 陈金祥, 郝浩杰. 机械科学与技术, 2020, 39(3), 484.
43 Li Y X, Jiao F, Zhang S J, et al. Acta Aeronautica ET Astronautica Sinica, 2021(10), 337(in Chinese).
李远霄, 焦锋, 张世杰, 等. 航空学报, 2021(10), 337.
44 Xu W X, Zhang L C. International Journal of Machine Tools and Manufacture, 2014, 80-81, 1.
45 Thakur R K, Singh K K. Journal of the Brazilian Society of Mechanical Sciences and Engineering, DOI:10. 1007/s40430-020-02463-7.
46 Alberdi A, Suarez A, Artaza T, et al. Procedia Engineering, 2013, 63, 421.
47 Ming I W M, Azmi A I, Chuan L C, et al. International Journal of Advanced Manufacturing Technology, 2018, 95(9-12), 3809.
48 Wong I M M, Azmi A I, Lee C C, et al. International Journal of Advanced Manufacturing Technology, 2018, 94(5-8), 1727.
49 Hejjaji A, Singh D, Kubher S, et al. Composites Part A:Applied Science and Manufacturing, 2016, 82, 42.
50 Bhaskar V, Kumar D, Singh K K. Australian Journal of Mechanical Engineering, 2019, 17(2), 95.
51 Solati A, Hamedi M, Safarabadi M. Optics and Laser Technology, 2019, 113, 104.
52 Kim W, Lim S H, Kang D, et al. Functional Composites and Structures, 2021, 3(2), 022001.
53 Solati A, Hamedi M, Safarabadi M. International Journal of Advanced Manufacturing Technology, 2019, 102(1-4), 791.
54 Zhu C F, Chen X C, Bao J S. Modern Manufacturing Engineering, 2020(1), 10(in Chinese).
朱超凡, 陈晓川, 鲍劲松. 现代制造工程, 2020(1), 10.
55 Wang J X, Wu Y W, Zhang G Y, et al. China Mechanical Engineering, 2021, 32(13), 1608(in Chinese).
汪建新, 吴耀文, 张广义, 等. 中国机械工程, 2021, 32(13), 1608.
56 Zhang Y, Qiao H, Zhao J, et al. Materials Today Communications, 2020, 25, 101456.
57 Zhang Y N, Qiao H C, Cao Z H, et al. Acta Aeronautica ET Astronautica Sinica, 2022(4), 521(in Chinese).
张旖诺, 乔红超, 曹治赫, 等. 航空学报, 2022(4), 521.
58 Liu S, Yang T, Liu C, et al. International Journal of Advanced Manufacturing Technology, 2020, 109(1-2), 33.
59 Karpat Y, Deer B, Bahtiyar O. The International Journal of Advanced Manufacturing Technology, 2014, 71(5-8), 1295.
60 Liu D, Tang Y, Cong W L. Composite Structures, 2012, 94(4), 1265.
61 Rajakumar I P T, Hariharan P, Vijayaraghavan L. International Journal of Materials & Product Technology, 2012, 43, 43.
62 Zhang H J, Chen W Y, Chen D C. Journal of Mechanical Engineering, 2004(7), 150(in Chinese).
张厚江, 陈五一, 陈鼎昌. 机械工程学报, 2004(7), 150.
63 Shan C W, Lyu X B. Aeronautical Manufacturing Technology, 2016(15), 34(in Chinese).
单晨伟, 吕晓波. 航空制造技术, 2016(15), 34.
64 Bao Y J, Gao H, Dong B, et al. Aerospace Materials and Technology, 2010, 40(4), 47(in Chinese).
鲍永杰, 高航, 董波, 等. 宇航材料工艺, 2010, 40(4), 47.
65 Schulze V, Becke C, Weidenmann K, et al. Journal of Materials Proces-sing Technology, 2011, 211(3), 329.
66 Ismail S O, Dhakal H N, Dimla E, et al. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture, 2017, 231(14), 2527.
67 Merino-Pérez J L, Royer R, Merson E, et al. Composite Structures, 2016, 140, 621.
68 Feito N, Álvarez J D, Cantero J L, et al. Procedia Engineering, 2015, 132, 632.
69 Babu N S M, Mathivanan N R, Kumar K V. Australian Journal of Mechanical Engineering, 2022, 20, 285.
70 Jenarthanan M P, Jeyapaul R, Kumar S R. Australian Journal of Mechanical Engineering, 2017, 15(2), 111.
71 Mathivanan N R, Mahesh B S, Shetty H A. Measurement, 2016, 91, 39.
72 Hou G, Luo B, Zhang K, et al. International Journal of Advanced Manufacturing Technology, 2021, 115(5-6), 1529.
73 Soltanieh G, Yam M C H. Smart Structures and Systems, 2021, 28(6), 745.
[1] 黄燕, 胡翔, 史才军, 吴泽媚. 混凝土中水泥浆体与骨料界面过渡区的形成和改进综述[J]. 材料导报, 2023, 37(1): 21050009-12.
[2] 李胤, 宋远佳, 刘春华. 基于热成像的CFRP损伤检测与演化规律研究综述[J]. 材料导报, 2022, 36(Z1): 22010161-9.
[3] 李斌, 周薇. CFRP管约束混凝土柱轴压性能试验及有限元分析研究[J]. 材料导报, 2022, 36(Z1): 22040146-6.
[4] 杨荣周, 陈佩圆, 葛进进, 徐颖, 王佳, 刘家兴, 谢昊天. 增幅循环荷载下CFRP约束型橡胶砂浆的疲劳特征[J]. 材料导报, 2022, 36(9): 21040223-10.
[5] 邹雄辉, 高维成, 刘伟, 周睿. 复合材料工型梁压缩失效模式试验与仿真分析研究[J]. 材料导报, 2022, 36(24): 21060263-7.
[6] 李鹏, 杜艺博, 黄培炜, 丁瀛, 刘根柱. 基于无壁型微脉管的光能损伤自修复复合材料[J]. 材料导报, 2022, 36(2): 20090371-5.
[7] 王超, 陈琪, 肖述广, 董仕节, 谢志雄, 罗平, 解剑英. 316奥氏体不锈钢高频感应焊接技术及缺陷形成机理[J]. 材料导报, 2022, 36(19): 21020063-5.
[8] 于长帅, 罗忠, 骆海涛, 何凤霞. 分层多孔材料声学建模和吸声性能预测方法研究[J]. 材料导报, 2022, 36(16): 21040182-5.
[9] 仇伟夷, 祝祥辉, 黄伟九, 杨绪盛, 汪鑫. 晶界特征对AA2099铝锂合金疲劳加载分层断裂影响探究[J]. 材料导报, 2022, 36(10): 21030256-5.
[10] 于冬雪, 于化杰, 黎红兵, 梁爽. FRP建筑材料的结构性能及应用综述[J]. 材料导报, 2021, 35(z2): 660-66.
[11] 徐可, 陆春华, 宣广宇, 倪铭志, 张灵灵, 周隽, 徐荣进. 温度老化对GFRP/BFRP筋残余弯曲性能的影响[J]. 材料导报, 2021, 35(4): 4053-4060.
[12] 井德胜, 白晓宇, 冯志威, 张明义, 李翠翠. 玄武岩纤维增强聚合物锚杆用于地下结构抗浮的可行性研究[J]. 材料导报, 2021, 35(19): 19223-19229.
[13] 高婧, 罗城. 基于SWT模型和威布尔分布的CFRP环带微动疲劳寿命预测[J]. 材料导报, 2021, 35(16): 16015-16020.
[14] 魏凤春, 李明哲, 张晓, 关春龙. 碳纤维增强砂轮基体的有限元模态分析研究[J]. 材料导报, 2020, 34(Z2): 590-593.
[15] 高治峰, 董丽虹, 王海斗, 吕振林, 郭伟, 王博正. 振动红外热成像技术用于不同类型缺陷检测的研究进展[J]. 材料导报, 2020, 34(9): 9158-9163.
[1] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
[2] Haoqi HU,Cheng XU,Lijing YANG,Henghua ZHANG,Zhenlun SONG. Recent Advances in the Research of High-strength and High-conductivity CuCrZr Alloy[J]. Materials Reports, 2018, 32(3): 453 -460 .
[3] Yanchun ZHAO,Congyu XU,Xiaopeng YUAN,Jing HE,Shengzhong KOU,Chunyan LI,Zizhou YUAN. Research Status of Plasticity and Toughness of Bulk Metallic Glass[J]. Materials Reports, 2018, 32(3): 467 -472 .
[4] Xinxing ZHOU,Shaopeng WU,Xiao ZHANG,Quantao LIU,Song XU,Shuai WANG. Molecular-scale Design of Asphalt Materials[J]. Materials Reports, 2018, 32(3): 483 -495 .
[5] Yongtao TAN, Lingbin KONG, Long KANG, Fen RAN. Construction of Nano-Au@PANI Yolk-shell Hollow Structure Electrode Material and Its Electrochemical Performance[J]. Materials Reports, 2018, 32(1): 47 -50 .
[6] Ping ZHU,Guanghui DENG,Xudong SHAO. Review on Dispersion Methods of Carbon Nanotubes in Cement-based Composites[J]. Materials Reports, 2018, 32(1): 149 -158 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅠ:Raw Materials and Mix Proportion Design Method[J]. Materials Reports, 2018, 32(1): 159 -166 .
[8] Guiqin HOU,Yunkai LI,Xiaoyan WANG. Research Progress of Zinc Ferrite as Photocatalyst[J]. Materials Reports, 2018, 32(1): 51 -57 .
[9] Jianxiang DING,Zhengming SUN,Peigen ZHANG,Wubian TIAN,Yamei ZHANG. Current Research Status and Outlook of Ag-based Contact Materials[J]. Materials Reports, 2018, 32(1): 58 -66 .
[10] Jing WANG,Hongke LIU,Pingsheng LIU,Li LI. Advances in Hydrogel Nanocomposites with High Mechanical Strength[J]. Materials Reports, 2018, 32(1): 67 -75 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed