Please wait a minute...
材料导报  2023, Vol. 37 Issue (10): 22100263-8    https://doi.org/10.11896/cldb.22100263
  无机非金属及其复合材料 |
金刚石/碳化硅复合材料的研究进展
朱万利1,2, 包建勋1,2,*, 张舸1,2, 崔聪聪1,2
1 中国科学院长春光学精密机械与物理研究所,长春 130033
2 中国科学院光学系统先进制造技术重点实验室,长春 130033
Research Progress of Diamond/SiC Composites
ZHU Wanli1,2, BAO Jianxun1,2,*, ZHANG Ge1,2, CUI Congcong1,2
1 Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China
2 Key Laboratory of Optical System Advanced Manufacturing Technology, Chinese Academy of Sciences, Changchun 130033, China
下载:  全 文 ( PDF ) ( 8447KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 金刚石/碳化硅复合材料综合了碳化硅与金刚石的优点,具有高热导率、低热膨胀系数、高比刚度、高硬度以及耐磨损等优异性能,具有广阔的应用前景,是陶瓷基复合材料领域研究的重点之一。金刚石/碳化硅复合材料的制备最早采用高温高压法,该方法可以有效避免金刚石颗粒石墨化带来的有害影响。随着技术的不断发展,出现了多种制备方法。不同的制备工艺下,金刚石/碳化硅复合材料内部的主要相含量、界面相结构及微观组织等因素决定了复合材料的整体性能水平。本文综述了国内外金刚石/碳化硅复合材料的研究与发展现状,从制备方法、性能特点、微观组织及界面反应机制等方面进行了阐述,分析了当前金刚石/碳化硅复合材料研究存在的问题,并对该复合材料的未来发展方向进行了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
朱万利
包建勋
张舸
崔聪聪
关键词:  金刚石/碳化硅复合材料  制备方法  性能特点  微观组织  界面反应机制    
Abstract: Diamond/SiC composites combine the advantages of SiC and diamond, and have excellent properties such as high thermal conductivity, low thermal expansion coefficient, high specific stiffness, high hardness and wear resistance, which have broad application prospects, and are one of the key research focuses in the field of ceramic matrix composites. Diamond/SiC composites are first prepared by high temperature and high pressure method, which can effectively avoid the harmful effects of graphitization of diamond particles. With the continuous development of technology, a variety of preparation methods have emerged. The properties of diamond/SiC composites are determined by the major phase content, interfacial phase structure and microstructure under different preparation methods. This paper reviews the research and development status of diamond/SiC composites at home and abroad, describes the preparation method, performance characteristics, microstructure and interfacial reaction mechanism, analyzes the current problems of diamond/SiC composites, and gives an outlook on the future development of this composites.
Key words:  diamond/SiC composite    preparation method    performance characteristic    microstructure    interfacial reaction mechanism
出版日期:  2023-05-25      发布日期:  2023-05-23
ZTFLH:  TB332  
基金资助: 长春市重点研发计划项目(21ZY04); 吉林省科技发展计划项目(20210509067RQ)
通讯作者:  *包建勋,中国科学院长春光学精密机械与物理研究所光学技术研究中心副研究员。2007年和2009年毕业于华中科技大学材料科学与工程专业,分别获工学学士和工学硕士学位。毕业后在中国科学院长春光学精密机械与物理研究所工作至今,目前主要从事光学精密结构级碳化硅及其复合材料研究工作。发表论文10余篇,收录于Ceramics International、SPIE Newsroom、《光学精密工程》《中国光学》等期刊。baojianxun@ciomp.ac.cn   
作者简介:  朱万利,2017年6月、2020年5月于华北电力大学获得工学学士学位和硕士学位。毕业后在中国科学院长春光学精密机械与物理研究所工作至今。目前主要研究领域为金刚石/碳化硅复合材料。
引用本文:    
朱万利, 包建勋, 张舸, 崔聪聪. 金刚石/碳化硅复合材料的研究进展[J]. 材料导报, 2023, 37(10): 22100263-8.
ZHU Wanli, BAO Jianxun, ZHANG Ge, CUI Congcong. Research Progress of Diamond/SiC Composites. Materials Reports, 2023, 37(10): 22100263-8.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.22100263  或          http://www.mater-rep.com/CN/Y2023/V37/I10/22100263
1 Sumiya H, Toda N, Satoh S. Diamond and Related Materials, 1997, 6(12), 1841.
2 Blank V, Popov M, Pivovarov G, et al. Diamond and Related Materials, 1999, 8(8-9), 1531.
3 Slack G A. Journal of Physics and Chemistry of Solids, 1973, 34(2), 321.
4 Moelle C, Klose S, Szücs F, et al. Diamond and Related Materials, 1997, 6(5-7), 839.
5 Brazhkin V V, Lyapin A G, Popova S V, et al. Physical Review B, 1997, 56(18), 11465.
6 Richard B K, John J G, Sarah H T. Science, 2005, 308(5726), 1268.
7 Li Q, Zhan G D, Li D, et al. Scientific Reports, 2020, 10(1), 1.
8 Field J E. Reports on Progress in Physics, 2012, 75(12), 1.
9 Zhang W X, Mu Y C, Liang B Y, et al. Superhard Material Enginee-ring, 2014, 26(3), 10 (in Chinese).
张旺玺, 穆云超, 梁宝岩, 等. 超硬材料工程, 2014, 26(3), 10.
10 Zhang C, Wang R C, Cai Z Y, et al. Surface and Coatings Technology, 2015, 277, 299.
11 Muhammad Z, Kabeer R, Fazal A K, et al. Materials & Design, 2015, 86, 248.
12 Yue X B, Wu R J, Zhang G D. Materials Reports, 1994, 8(3), 64 (in Chinese).
喻学斌, 吴人洁, 张国定. 材料导报, 1994, 8(3), 64.
13 Fahrenholtz W G, Hilmas G E. Scripta Materialia, 2017, 129, 94.
14 Talwar D N, Sherbondy J C. Applied Physics Letters, 1995, 67(22), 3301.
15 Slack G A. Journal of Applied Physics, 1964, 35(12), 3460.
16 Mitchell J S, Zorman C A, Kicher T, et al. Journal of Aerospace Engineering, 2003, 16(2), 46.
17 Chai W, Deng Q F, Wang Y Y, et al. Light Industry Machinery, 2012, 30(4), 117 (in Chinese).
柴威, 邓乾发, 王羽寅, 等. 轻工机械, 2012, 30(4), 117.
18 Akbas M A, Mastrobattisto D, Vance B, et al. Ceramic Engineering & Science Proceedings, 2013, 33(2), 135.
19 Svendsen L, Zheng J, Meurling F, et al. U. S. patent application, US20080199388, 2008.
20 He P B. Preparation and characterization of diamond/SiC composites. Master's Thesis, National University of Defense Technology, China, 2008 (in Chinese).
贺鹏博. Diamond/SiC陶瓷基复合材料的制备及性能研究. 硕士学位论文, 国防科学技术大学, 2008.
21 Li Q H, Peng F, Wu Q, et al. Diamond and Abrasives Engineering, 2010, 30(2), 54 (in Chinese).
李庆华, 彭放, 武琪, 等. 金刚石与磨料磨具工程, 2010, 30(2), 54.
22 Zhang Y Y, Wang T S, Hsu C Y, et al. Ceramics International, 2021, 47(12), 17084.
23 Bundy F P. Physica A:Statistical Mechanics and Its Applications, 1989, 156(1), 169.
24 Nauyoks S, Wieligor M, Zerda T W, et al. Composites Part A:Applied Science and Manufacturing, 2009, 40(5), 566.
25 Wu Q, Peng F, Li Q H, et al. Diamond and Abrasives Engineering, 2011, 31(2), 40 (in Chinese).
武琪, 彭放, 李庆华, 等. 金刚石与磨料磨具工程, 2011, 31(2), 40.
26 Chen L, Yang X, Su Z A, et al. Ceramics International, 2018, 44(8), 9601.
27 Yang Z L, He X B, Zhang H M, et al. Rare Metal Materials and Engineering, 2011, 40(S1), 383 (in Chinese).
杨振亮, 何新波, 张昊明, 等. 稀有金属材料与工程, 2011, 40(S1), 383.
28 Cavaliere P. In:Spark Plasma Sintering of Materials, Cavaliere P, ed. , Springer, Switzerland, 2019, pp.3.
29 Zhu C X, Lang J, Ma N G. Ceramics International, 2012, 38(8), 6131.
30 Zhou X L. Fabrication of diamond composites by spark plasma sintering. Master's Thesis, Yanshan University, China, 2013 (in Chinese).
周小琳. 放电等离子体烧结制备金刚石复合材料. 硕士学位论文, 燕山大学, 2013.
31 Ohtaka O, Shimono M, Ohnishi N, et al. Physics of the Earth and Planetary Interiors, 2004, 143-144(1), 587.
32 Ohtaka O, Ohnishi N, Kubo K, et al. High Pressure Research, 2005, 25(1), 11.
33 Ohtaka O, Funakoshi K I, Shimono M. Journal of the Society of Materials Science Japan, 2012, 61(5), 407
34 Hirota K, Aoki M, Kato M, et al. Journal of the Japan Society of Powder and Powder Metallurgy, 2019, 66(1), 37.
35 Liu Y S, Hu C H, Feng W, et al. Journal of the European Ceramic Society, 2014, 34(15), 3489.
36 Nishihora R K, Rachadel P L, Quadri M, et al. Journal of the European Ceramic Society, 2017, 38(4), 988.
37 Chen C, Liu Y S, Wang C H, et al. Advanced Engineering Materials, 2018, 21(5), 1800640.
38 Mlungwane K, Herrmann M, Sigalas I. Journal of the European Ceramic Society, 2008, 28(1), 321.
39 Mathhey B, Kunze S, Hörner M, et al. Journal of Materials Research, 2017, 32(17), 3362.
40 Wang X L. Preparation and properties of diamond/silicon carbide composites by silicon liquid infiltration. Ph. D. Thesis, University of Science and Technology Beijing, China, 2021 (in Chinese).
王旭磊. 液相硅熔渗制备金刚石/碳化硅复合材料及性能研究. 博士学位论文, 北京科技大学, 2021.
41 Yang Z L, He X B, Wu M, et al. Ceramics International, 2013, 39(3), 3399.
42 Zheng W. Preparation and properties of diamond/SiC composites by silicon vapor infiltration. Ph. D. Thesis, University of Science and Techno-logy Beijing, China, 2019 (in Chinese).
郑伟. 气相渗硅制备金刚石/碳化硅复合材料及其性能研究. 博士学位论文, 北京科技大学, 2019.
43 Ambrosi A, Pumera M. Chemical Society Reviews, 2016, 45(10), 2740.
44 Chen R G, Lian Q, Li D C, et al. Ceramics International, 2021, 47(10), 14009.
45 Tang Y H, Zhou J J, Zou Y, et al. Chemistry & Bioengineering, 2021, 38(9), 42 (in Chinese).
唐弋昊, 周佳骏, 邹阳, 等. 化学与生物工程, 2021, 38(9), 42.
46 Tang J, Yang Y, Huang Z R. Materials Reports, 2021, 35(Z1), 172 (in Chinese).
唐杰, 杨勇, 黄政仁. 材料导报, 2021, 35(Z1), 172.
47 Herrmann M, Matthey B, Hörner S, et al. Journal of the European Ceramic Society, 2012, 32(9), 1915.
48 Zheng W, He X B, Wu M, et al. Applied Physics A, 2018, 124(12), 804.
49 Carrete J, Vermeersch B, Katre A, et al. Computer Physics Communications, 2017, 220, 351.
50 Zheng W, He X B, Wu M, et al. Vacuum, 2019, 159, 507.
51 Voronin G A, Zerda T W, Qian J, et al. Diamond and Related Materials, 2003, 12(9), 1477.
52 Ko Y S, Tsurumi T, Fukunaga O, et al. Journal of Materials Science, 2001, 36(2), 469.
53 Li Y Y, Cao X X, Yu Y, et al. Journal of Applied Physics, 2020, 128(24), 245091.
54 He X B, Zhang Z J, Liu P F, et al. Journal of the European Ceramic Society, 2022, 42(7), 3127.
55 Mathhey B, Höhn S, Wolfrum A K, et al. Journal of the European Ceramic Society, 2017, 37(5), 1917.
56 Zhang Y Y, Hsu C Y, Karandikar P, et al. Journal of the European Ceramic Society, 2019, 39(16), 5190.
57 Fitzer E, Fritz W, Gadow R. Chemie Ingenieur Technik, 1985, 57(9), 737.
58 Yang Z L, He X B, Wu M, et al. Journal of the European Ceramic Society, 2013, 33(4), 869.
59 Pampuch R, Walasek E, Bialoskórski J. Ceramics International, 1986, 12(2), 99.
60 Shevchenko V Y, Perevislov S N, Ugolkov V L. Glass Physics and Che-mistry, 2021, 47(3), 197.
[1] 陈磊, 徐荣正, 张利, 刘亚光, 李正坤, 张海峰, 张波. Zr基非晶夹层对Al/TA1异种金属电子束焊接头组织和性能的影响[J]. 材料导报, 2023, 37(8): 21100079-4.
[2] 何承绪, 高洁, 毛航银, 马光, 陈新, 祝志祥, 张一航, 胡卓超. 退火温度对耐热型取向硅钢组织与磁性能的影响[J]. 材料导报, 2023, 37(8): 21090231-5.
[3] 乔丽学, 曹睿, 车洪艳, 李晌, 王铁军, 董浩, 王彩芹, 闫英杰. M390高碳马氏体不锈钢与304奥氏体不锈钢CMT对接焊连接机理[J]. 材料导报, 2023, 37(7): 21090294-6.
[4] 张冠星, 董宏伟, 钟素娟, 薛行雁, 刘晓芳, 常云峰. BAg30CuZnSn退火过程中组织性能演变[J]. 材料导报, 2023, 37(6): 21070103-4.
[5] 谢吉林, 彭程, 谢菀新, 淦萌萌, 章文滔, 吴集思, 陈玉华. 铝/镁异种合金磁脉冲焊接接头组织与性能研究[J]. 材料导报, 2023, 37(5): 22010051-5.
[6] 郝思洁, 褚强, 李文亚, 杨夏炜, 邹阳帆. 电脉冲处理对金属材料组织、力学性能影响的研究进展[J]. 材料导报, 2023, 37(4): 21030039-9.
[7] 王兰喜, 何延春, 王虎, 吴春华, 李林. 石墨烯导热纸研究进展[J]. 材料导报, 2023, 37(3): 20110183-9.
[8] 闫丹丹, 单忠德, 臧勇. 多材质混合砂型性能及其对A356铝合金凝固组织的影响研究[J]. 材料导报, 2023, 37(1): 21080212-5.
[9] 闫时雨, 纪文涛, 谢克强, 袁晓磊. 宽禁带半导体β-Ga2O3单晶制备工艺研究进展[J]. 材料导报, 2022, 36(Z1): 21050183-6.
[10] 阎亚雯, 余竹焕, 高炜, 费祯宝, 刘旭亮, 王晓慧. 共晶高熵合金力学性能的研究进展[J]. 材料导报, 2022, 36(Z1): 21050264-7.
[11] 郭瑞琪, 王秀琦, 刘国怀, 李天瑞, 王昭东. Ti-44Al-5Nb-1Mo-(V,B)合金热变形过程中的相变、再结晶行为及组织调控[J]. 材料导报, 2022, 36(Z1): 22010111-6.
[12] 陈杰, 樊正阳, 毛华明, 尹俊刚, 李耀, 代伟, 杨宏伟. 镀银铜纳米颗粒的制备与应用研究进展[J]. 材料导报, 2022, 36(Z1): 21090201-4.
[13] 史天宇, 孔维雄, 陈雨琳, 宁保群, 董治中. 新型高氮马氏体耐热铸钢的热处理及相变解析[J]. 材料导报, 2022, 36(Z1): 20120084-6.
[14] 李伟, 曹睿, 闫英杰. 不同热处理态下粉末冶金花纹钢的组织性能及拉伸断裂行为[J]. 材料导报, 2022, 36(9): 21020104-7.
[15] 肖棚, 高杰维, 刘里根, 韩靖. 激光熔覆修复EA4T车轴钢显微组织和强度评价[J]. 材料导报, 2022, 36(7): 21070180-7.
[1] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4] Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5] Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6] Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7] Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8] Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9] Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10] Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed