双相钢与铝合金异种金属激光焊接技术研究进展

doi:10.11896/cldb.23090075

材料导报

2024, Vol. 38

Issue (22): 23090075-9 https://doi.org/10.11896/cldb.23090075

金属与金属基复合材料

双相钢与铝合金异种金属激光焊接技术研究进展

李昂¹, 曾一达^1,*, 李智勇², 贺荣³, 郭正华¹, 陈玉华¹, 江一¹, 杨子睿⁴

1 南昌航空大学航空制造工程学院,南昌 330063
2 江西昌河航空工业有限公司,江西景德镇 333002
3 江铃汽车股份有限公司,南昌 330200
4 伯明翰大学冶金与材料学院,英国伯明翰 B15 2SE

Advances in Laser Welding Technology for Dissimilar Metal Joining of Dual-phase Steel and Aluminium Alloy

LI Ang¹, ZENG Yida^1,*, LI Zhiyong², HE Rong³, GUO Zhenghua¹, CHEN Yuhua¹, JIANG Yi¹, YANG Zirui⁴

1 School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang 330063, China
2 Jiangxi Changhe Aviation Industry Co., Ltd., Jingdezhen 333002, Jiangxi, China
3 Jiangling Motors Co., Ltd., Nanchang 330200, China
4 School of Metallurgy and Materials, University of Birmingham, Birmingham B15 2SE, United Kingdom

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 4295KB )
输出: BibTeX | EndNote (RIS)

摘要随着汽车行业对减重、节能需求的增加,近年来铝合金等轻质材料广泛应用在车身结构件中。双相钢与铝合金异种金属激光焊接中,材料物化性能差异大导致焊缝成形差、接头强度低,主要原因是钢/铝界面处生成的Fe-Al金属间化合物(Intermetallic compounds,IMC)脆性大、硬度高,焊接接头存在较大的残余应力,致使焊接接头性能恶化。本文综述了工艺窗口和冶金调控对焊缝成形的影响规律,并阐述了飞溅、烧损、裂纹等焊接缺陷的控制措施,总结了焊接参数和不同中间层元素对界面中间相的种类、数量以及接头力学性能的影响规律,分析了不同中间层元素(Pb、Sn、Ti、Cu、Mn、Si等)在焊接过程的作用和特点,并展望了双相钢/铝合金异种金属激光焊接的未来发展趋势。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李昂
	曾一达
	李智勇
	贺荣
	郭正华
	陈玉华
	江一
	杨子睿

关键词: 激光焊接双相钢异种金属中间相

Abstract: With the increasing demand for weight reduction and energy saving in the automotive industry, lightweight materials such as aluminium alloys have been widely used in body structures in recent years. In dissimilar metal laser welding of dual-phase steel and aluminium alloy, poor weld formation and low joint strength due to large differences in material physical and chemical properties are mainly attributed to the high brittleness and hardness of Fe-Al intermetallic compounds(IMC) generated at the steel/aluminium interface, which large residual stresses in welded joints deteriorate the performance of welded joints. In this paper, the influence laws of process window and metallurgical regulation on weld formation are reviewed, and the control measures of welding defects such as spatters, loss, cracks, etc. are illustrated. The influence laws of welding parameters and different intermetallic elements on the types and quantities of interfacial intermetallic phases as well as the mechanical properties of joints are summarised, and the roles and characteristics of different intermetallic elements(Pb, Sn, Ti, Cu, Mn, Si, etc.) in the welding process are analysed, and the role and characteristics of different intermetallic elements in the weld process are presented. It also looks forward to the future development trend of laser welding of dissimilar metals of dual-phase steel/aluminium alloy.

Key words: laser welding dual-phase steel dissimilar metal intermediate phase

出版日期: 2024-11-25 发布日期: 2024-11-22

ZTFLH:

TG44

基金资助: 国家自然科学基金(52105451);江西省杰出青年基金(20232ACB214013);江西省重大科技研发专项(20194ABC28001);江西省重点研发计划重点项目(20212BBE51007)

通讯作者: *曾一达,南昌航空大学航空制造工程学院副教授、硕士研究生导师。2010年海南大学材料科学与工程专业本科毕业,2014年江苏大学材料学专业硕士毕业,2018年天津大学材料加工工程专业博士毕业,美国南卡罗来纳大学(University of South Carolina)联合培养博士。目前主要从事高性能有色金属新材料、金属功能材料、高能束焊接理论与技术、金属3D打印等方面的研究。发表学术论文10余篇,包括Journal of Nanoparticle Research、Applied Surface Science等。zyd_welding@163.com

作者简介: 李昂,2022年7月于沈阳理工大学获得工学学士学位。现为南昌航空大学航空制造工程学院硕士研究生,在曾一达副教授的指导下进行研究。目前主要研究领域为激光焊接。

引用本文:

李昂, 曾一达, 李智勇, 贺荣, 郭正华, 陈玉华, 江一, 杨子睿. 双相钢与铝合金异种金属激光焊接技术研究进展[J]. 材料导报, 2024, 38(22): 23090075-9.
LI Ang, ZENG Yida, LI Zhiyong, HE Rong, GUO Zhenghua, CHEN Yuhua, JIANG Yi, YANG Zirui. Advances in Laser Welding Technology for Dissimilar Metal Joining of Dual-phase Steel and Aluminium Alloy. Materials Reports, 2024, 38(22): 23090075-9.

链接本文:

http://www.mater-rep.com/CN/10.11896/cldb.23090075 或 http://www.mater-rep.com/CN/Y2024/V38/I22/23090075

1 Khan M S, Ali S, Westerbaan D, et al. Journal of Manufacturing Processes, 2022, 78, 242.
2 Khan M S, Soleimani M, Midawi A R H, et al. Journal of Manufacturing Processes, 2023, 102, 663.
3 Kuziak R, Kawalla R, Waengler S. Archives of Civil and Mechanical Engineering, 2008, 8(2), 103.
4 Cao Z J, Wang Z T. Light Alloy Fabrication Technology, 2013, 41(3), 1(in Chinese).
曹景竹, 王祝堂. 轻合金加工技术, 2013, 41(3), 1.
5 Sun W L. The research of lightweight technology of lightweight materials applied in electric vehicle hub. Master's Thesis, Beijing Institute of Technology, China, 2016(in Chinese).
孙文龙. 轻质材料应用于汽车轮毂的轻量化技术研究. 硕士学位论文, 北京理工大学, 2016.
6 Pan B, Sun H, Shang S L, et al. Journal of Manufacturing Processes, 2021, 70, 608.
7 Ashiri R, Mostaan H, Park Y D. Metallurgical and Materials Transactions A, 2018, 49(12), 6161.
8 Kim J W, Murugan S P, Yoo J H, et al. Science and Technology of Welding and Joining, 2020, 25(3), 235-242.
9 Mei L F, Yan D B, Chen G Y, et al. Materials & Design, 2015, 78, 107.
10 Sun J H, Yan Q, Gao W, et al. Materials & Design, 2015, 83, 120.
11 Zhang Y T, Wang W X, Li Z Y, et al. Optics & Laser Technology, 2023, 163, 109319.
12 Kotadia H R, Franciosa P, Jabar S, et al. Journal of Materials Research and Technology, 2022, 19, 449.
13 Kotadia H R, Franciosa P, Ceglarek D. MATEC Web of Conferences, 2019, 269, 02012.
14 Wang M, Yu Z S, Zhang P L, et al. Hot Working Technology, 2017, 46(23), 10(in Chinese).
王曼, 于治水, 张培磊, 等. 热加工工艺, 2017, 46(23), 10.
15 Zhuo L X, Zhang D N, Yan Q Z, et al. Aeronautical Manufacturing Technology, 2021, 64(15), 14(in Chinese).
栗卓新, 张冬妮, 言奇株, 等. 航空制造技术, 2021, 64(15), 14.
16 Zhang Y. Study on microstructures and properties of laser welded joints of Titanium alloy/stainless steel dissimilar materials. Ph. D. Thesis, Jilin University, China, 2019(in Chinese).
张岩. 钛合金/不锈钢异种材料激光焊接头微观组织及力学性能的研究. 博士学位论文, 吉林大学, 2019.
17 Chen B X. Effect of dual beam laser welding process on microstructure and mechanical properties of steel/aluminum alloy dissimilar metal joints. Master's Thesis, Beijing University of Technology, China, 2018(in Chinese).
陈勃旭. 双光束激光焊接工艺对钢/铝合金异种金属接头组织和力学性能的影响. 硕士学位论文, 北京工业大学, 2018.
18 Cui L, Chen B X, Chen L, et al. Journal of Materials Processing Technology, 2018, 256, 87.
19 Zhou X H, Zhao H Y, Liu F Y, et al. Journal of Materials Research and Technology, 2021, 15, 4487.
20 Yang S B, Wang D X, Yang L, et al. Optik, 2022, 268, 169795.
21 Shi M X, Chen S J, Hu Q X, et al. Electric Welding Machine, 2017, 47(5), 12(in Chinese).
石铭霄, 陈书锦, 胡庆贤, 等. 电焊机, 2017, 47(5), 12.
22 Sadeghian A, Iqbal N. Optics & Laser Technology, 2022, 146, 107595.
23 Li T, Zhou D W, Yan Y R T, et al. Optics & Laser Technology, 2021, 141, 107114.
24 Peng C, Liu G Q, et al. Machine Tool & Hydraulics, 2021, 49(7), 22(in Chinese).
彭聪, 高向东, 刘桂谦, 等. 机床与液压, 2021, 49(7), 22.
25 Liu G Q, Gao X D, Peng C, et al. Transactions of Nonferrous Metals Society of China, 2020, 30(10), 2639.
26 Indhu R, Soundarapandian S, Vijayaraghavan L. Journal of Materials Processing Technology, 2018, 262, 411.
27 Pan J C. Study on the behavior and mechanism of molten pool in laser deep fusion welding of steel/aluminum dissimilar metals. Master's Thesis, Hunan University, China, 2018(in Chinese).
潘井春. 钢/铝异种金属激光深熔焊过程中熔池行为及机理研究. 硕士学位论文, 湖南大学, 2018.
28 Yuce C, Karpat F, Yavuz N. The International Journal of Advanced Ma-nufacturing Technology, 2019, 104(5), 2693.
29 Li T. Mechanism study of the effect of interfacial intermetallic compounds on the properties of steel/aluminum laser welded joints. Ph. D. Thesis, Hunan University, China, 2021(in Chinese).
李田. 钢/铝激光焊接界面金属间化合物影响接头性能的作用机制研究. 博士学位论文, 湖南大学, 2021.
30 Zhou D W, Xu, S H, Li P, et al. International Journal of Advanced Manufacturing Technology, 2016, 86, 2231.
31 Zhou D W, Jiang D F, Liu J S, et al. The Chinese Journal of Nonferrous Metals, 2019, 29(5), 942(in Chinese).
周惦武, 姜德福, 刘金水, 等. 中国有色金属学报, 2019, 29(5), 942.
32 Zhou D W, Liu J S, Lu Z Y, et al. Journal of Mechanical Engineering. 2018, 54(14), 58(in Chinese).
周惦武, 刘金水, 卢源志, 等. 机械工程学报, 2018, 54(14), 58.
33 Chen X M, Wang X N, Yan Q, et al. Chinese Journal of Lasers, 2018, 45(11), 36(in Chinese).
陈夏明, 王晓南, 颜倩, 等. 中国激光, 2018, 45(11), 36.
34 van Bohemen S M C, Sietsma J. Metallurgical and Materials Transactions A, 2009, 40(5), 1059.
35 Wang X N, Chen X M, Weng W P, et al. Light metals 2019, Springer International Publishing, 2019, pp.385.
36 Indhu R, Divya S, Tak Manish, et al. Procedia Manufacturing, 2018, 26, 495.
37 Wang C M, Cui L Y, Mi G Y, et al. Journal of Alloys and Compounds, 2017, 726, 556.
38 Xie X G, Zhou J X, Long J Q. Optics & Laser Technology, 2021, 140, 107085.
39 Li T, Zhou D W, Yan Y R T, et al. Materials Science and Engineering A, 2020, 796, 139929.
40 Zhou D W, Liu J S, Lu Y Z, et al. Optics & Laser Technology, 2017, 94, 171.
41 Sumer A, Smith J F. Journal of Applied Physics, 1962, 33(7), 2283.
42 Mattesini M, Ahuja R, Johansson B. Physical Review B, 2003, 68(18), 184108.
43 Pugh S F. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 1954, 45(367), 823.

[1]	魏一帆, 夏会聪, 张佳楠. 钠离子存储器件中界面效应作用机制研究[J]. 材料导报, 2024, 38(8): 23120085-9.
[2]	龚浩, 程东海, 刘钊泽, 李文杰, 邹鹏远. CFRP/TC4激光连接工艺及接头组织和性能[J]. 材料导报, 2024, 38(7): 22110267-5.
[3]	陈磊, 徐荣正, 张利, 刘亚光, 李正坤, 张海峰, 张波. Zr基非晶夹层对Al/TA1异种金属电子束焊接头组织和性能的影响[J]. 材料导报, 2023, 37(8): 21100079-4.
[4]	张忠科, 蒋常铭, 李轩柏, 熊建强, 童辉. 汽车用铝钢无匙孔搅拌摩擦点焊接头组织及界面特征研究[J]. 材料导报, 2023, 37(5): 21070281-6.
[5]	陈轩, 李萌蘖, 卜恒勇, 左汉宁. 7系铝合金焊接技术的研究现状及展望[J]. 材料导报, 2023, 37(13): 21010106-9.
[6]	徐旭, 刘玉龙, 宿再春, 付迎, 黄健康, 樊丁. 添加SiO₂纳米粉末AC辅助Al/Cu等离子弧熔钎焊接头组织及性能分析[J]. 材料导报, 2023, 37(11): 21110015-7.
[7]	马才女, 高雪云, 邢磊, 王海燕, 呼陟宇, 翟亭亭. 铁素体/马氏体双相钢拉伸变形过程中应力应变不均匀性分析[J]. 材料导报, 2023, 37(11): 21100187-4.
[8]	姚诗言, 曾立艳, 刘军. 高性能锂金属电池负极结构设计及界面强化研究进展[J]. 材料导报, 2022, 36(16): 21010216-11.
[9]	时尚, 刘丰刚, 黄春平, 舒宗富. 激光复合热源焊接技术的研究进展[J]. 材料导报, 2022, 36(11): 20100230-8.
[10]	田飞, 蔺宏涛, 江海涛. 高强度钢QP980激光焊接头的微观组织与力学性能[J]. 材料导报, 2021, 35(Z1): 447-453.
[11]	邓德伟, 吕捷, 马玉山, 张勇, 黄治冶. FV520B钢激光焊接工艺参数优化及组织性能[J]. 材料导报, 2021, 35(8): 8127-8133.
[12]	秦丰, 李睿, 张春波, 周军, 赵衍华. 铝/钢异种金属轴向摩擦焊研究现状[J]. 材料导报, 2021, 35(21): 21228-21235.
[13]	吴正刚, 李熙, 李忠涛. 高熵合金应用于异种金属焊接的研究现状及发展趋势[J]. 材料导报, 2021, 35(17): 17031-17036.
[14]	李岩, 胡志力, 于海洋, 庞秋. 铝与钢异种材料连接技术及其研究进展[J]. 材料导报, 2020, 34(13): 13167-13174.
[15]	温俊霞, 曹睿, 李骏鹏, 曾茂燕, 陈璟. 球墨铸铁表面CMT堆焊H08Mn2Si焊丝的研究[J]. 材料导报, 2019, 33(Z2): 447-451.

[1]	Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO₂/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2]	Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3]	Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4]	Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5]	Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6]	Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7]	Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8]	Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9]	Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10]	Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .

Viewed

Full text

Abstract

Cited

Shared

Discussed