Please wait a minute...
材料导报  2022, Vol. 36 Issue (Z1): 22030150-4    
  无机非金属及其复合材料 |
蒸压加气混凝土板研究与应用综述
唐凌霄1, 姚华彦1, 徐马云龙2, 刘玉亭3, 陈传明3, 周璟1, 吴叙言1
1 合肥工业大学土木与水利工程学院,合肥 230009
2 安徽省建筑科学研究设计院,合肥 230088
3 安徽省高迪循环经济产业园股份有限公司,安徽 六安 237010
Review on the Research and Application of Autoclaved Aerated Concrete Slab
TANG Lingxiao1, YAO Huayan1, XU Mayunlong2, LIU Yuting3, CHEN Chuanming3, ZHOU Jing1, WU Xuyan1
1 School of Civil Engineering, Hefei University of Technology, Hefei 230009, China
2 Anhui Architectural Research and Design Institute, Hefei 230088, China
3 Anhui Gaodi Circular Economy Industrial Park Co., Ltd., Lu’an 237010, Anhui, China
下载:  全 文 ( PDF ) ( 1994KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 蒸压加气混凝土是一种发气后在高温高压下蒸汽养护所制成的轻质混凝土。蒸压加气混凝土制品主要分为砌块和板材,板材相较于砌块整体性好、施工便捷、经济效益高,在实际工程中运用更广泛。本文主要介绍了蒸压加气混凝土板的发展及应用概况;总结分析了蒸压加气混凝土板的物理力学性能、防水性能、抗冻性能、耐火性能、连接节点和施工技术的研究现状;阐述了蒸压加气混凝土板的研究与应用发展趋势,以期为蒸压加气混凝土板的发展提供参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
唐凌霄
姚华彦
徐马云龙
刘玉亭
陈传明
周璟
吴叙言
关键词:  蒸压加气混凝土板  力学性能  防水性能  抗冻性能  耐火性能  连接节点  施工技术    
Abstract: Autoclaved aerated concrete is a kind of lightweight concrete made by steam curing at high temperature under high pressure after air ge-neration. Autoclaved aerated concrete products are mainly divided into blocks and slabs.Compared with blocks, slabs have good integrity, convenient construction and high economic benefit, so it is more popular in practical engineering.This paper mainly introduces the development and application of autoclaved aerated concrete slab. The physical and mechanical properties, waterproof performanc, frost resistance, fire resis-tance, connection and construction technology of autoclaved aerated concrete slab are summarized and analyzed. The application and development tendency of autoclaved aerated concrete slab are presented, which is expected to provide reference for the development of autoclaved aerated concrete slab.
Key words:  autoclaved aerated concrete slab    mechanical property    waterproof performance    frost resistance    fire resistance    connection    construction technology
出版日期:  2022-06-05      发布日期:  2022-06-08
ZTFLH:  TU528.2  
基金资助: 安徽省重点研究与开发计划项目(202004a07020027;202104h04020024)
通讯作者:  yaohuayan@hfut.edu.cn   
作者简介:  唐凌霄,现为合肥工业大学土木与水利工程学院土木工程专业建筑工程方向本科生,在姚华彦副教授的指导下进行研究。目前主要研究领域为土木工程材料。
姚华彦,合肥工业大学土木与水利工程学院,副教授。2008 年毕业于中国科学院武汉岩土力学研究所,获岩土工程博士学位。同年进入合肥工业大学工作至今,主要从事岩土工程、土木工程材料方面的教学和科研工作,目前已发表论文60余篇。
引用本文:    
唐凌霄, 姚华彦, 徐马云龙, 刘玉亭, 陈传明, 周璟, 吴叙言. 蒸压加气混凝土板研究与应用综述[J]. 材料导报, 2022, 36(Z1): 22030150-4.
TANG Lingxiao, YAO Huayan, XU Mayunlong, LIU Yuting, CHEN Chuanming, ZHOU Jing, WU Xuyan. Review on the Research and Application of Autoclaved Aerated Concrete Slab. Materials Reports, 2022, 36(Z1): 22030150-4.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2022/V36/IZ1/22030150
1 赵田田, 杨赞中, 王涵, 等.广东化工, 2015, 42(12), 83.
2 苗启松, 卢清刚, 刘华, 等.建筑结构, 2019, 49(S1), 645.
3 张继能, 顾同曾.加气混凝土生产工艺, 武汉工业大学出版社, 1992, pp. 06.
4 代德伟, 刘京丽, 王钰. 混凝土世界, 2013, 34(4), 30.
5 刘艳军, 陈伯田, 陈玉. 建筑节能, 2013, 41(3), 30.
6 吴会阁, 赵彦. 防灾科技学院学报, 2012, 14(2), 38.
7 姜勇, 齐子刚.蒸压加气混凝土生产技术, 中国建材工业出版社, 2021, pp. 04.
8 Qu X L, Zhao X G. Construction and Building Materials, 2017, 135, 505.
9 曲秀姝, 陈志华, 孙国军.建筑材料学报, 2012, 15(2), 268.
10 Yardim Y, Waleed A, Jaafar M S, et al. Construction and Building Materials, 2013, 40, 405.
11 张国伟, 陈博珊, 肖伟,等. 建筑结构, 2016, 46(13), 97.
12 苏立勇, 罗平, 路清泉, 等. 科学技术与工程, 2020, 20(13), 5255.
13 徐春一, 徐怡婷, 孟祥君. 新型建筑材料, 2019, 46(4), 55.
14 陈艺顺, 王波, 周健南, 等. 振动与冲击, 2019, 38(18), 201.
15 周耀, 俞斌, 郭全全,等. 振动与冲击, 2019, 38(22), 79.
16 Arslan M E, Aykanat B, Suba S, et al.Engineering Structures, 2021, 240(1), 112431.
17 李国强, 方明霁, 刘宜靖, 等. 土木工程学报, 2005, 52(10), 31.
18 周薛霞, 杨赞中, 徐艳娇,等. 材料导报:综述篇, 2019, 33(8), 2546.
19 黄国宏, 陈福林, 谢水兰, 等. 工业建筑, 2012, 42(9), 06.
20 侯兆新, 陈福林, 曾昭波, 等. 工业建筑, 2012, 42(9), 01.
21 王秀芬. 加气混凝土性能及优化的试验研究. 硕士学位论文, 西安建筑科技大学, 2006.
22 李书进, 钱红萍, 黄小红, 等. 建筑材料学报, 2017, 20(6), 970.
23 刘玉亭, 陈传明, 田野, 等.中国建筑防水, 2021, 444(S1), 05.
24 钱彦磊. 混凝土刚性自防水材料的制备与性能研究. 硕士学位论文, 安徽建筑大学, 2021.
25 贾兴文, 钱觉时. 新型建筑材料, 2007, 34(1), 20.
26 李庆繁, 高连玉.墙材革新与建筑节能, 2014(8), 41.
27 王迪, 王玉山.混凝土, 2018, 40(7), 137.
28 梁晓前, 黄榜彪, 黄秉章,等. 材料导报, 2021, 35(S2), 200.
29 丁向群, 董越.硅酸盐通报, 2014, 33(10), 2631.
30 Ropelewski L, Neufeld R D.Journal of Energy Engineering, 1999, 125(2), 59.
31 李志远,蒋首超. 建筑钢结构进展, 2021, 23(1), 68.
32 叶继红, 陈伟, 汪正流, 等.建筑结构学报, 2015, 36(8), 108.
33 Wakili K G, Hugi E, Karvonen L, et al. Cement and Concrete Compo-sites, 2015, 62, 52.
34 高连玉, 李繁庆.蒸压加气混凝土建筑制品生产及应用, 中国建材工业出版社, 2015, pp. 120.
35 孙静, 张敬.同济大学学报(自然科学版), 2017, 45(6), 891.
36 梁晓婕, 王燕. 建筑钢结构进展, 2022, 24(1), 01.
37 周冲, 刘若南, 王羽, 等. 施工技术, 2020, 49(8), 27.
38 陈萌, 李学稼, 于秋波, 等. 建筑结构, 2019, 49(21), 99.
39 邓宇, 马富强, 吴贤情, 等. 混凝土, 2021(2), 127.
40 Asadzadeh S A, Mohammadi M, Attari N K A, et al. Advances in Structural Engineering, 2019, 23(4), 642.
41 Cao Z G, Du P, Fan F, et al. Advances in Structural Engineering, 2017, 20(4), 629.
42 王月栋, 张泽宇, 郭剑云,等. 建筑钢结构进展, 2021, 23(10), 75.
43 李国强, 王城.钢结构, 2005, 20(1), 52.
44 Casafont M, Arnedo A, Roure F, et al. Thin-Walled Structures, 2006, 44(2), 197.
45 刘华, 卢清刚, 苗启松,等. 建筑结构, 2019, 49(18), 32.
46 张艳霞, 程啸天, 张爱林,等. 建筑钢结构进展, 2021, 23(10), 67.
47 乔文涛, 张海影. 天津大学学报(自然科学与工程技术版), 2018, 51(S1), 127.
48 Asadzadeh S A, Mohammadi M, Attari N K A, et al. Advances in Structural Engineering, 2019, 23(4), 642.
49 苏永波, 张小富, 陈家平.混凝土与水泥制品, 2013(11), 75.
50 侯兆新, 陈福林, 谢水兰,等. 施工技术, 2011, 40(13), 01.
51 阳芬. 蒸压加气混凝土泛霜机理及防治技术研究. 硕士学位论文,中南林业科技大学, 2020.
52 Dow C, Glasser F.P. Cement and Concrete Research, 2003, 33(1), 147.
53 贺素仁, 詹炳根, 周安, 等. 合肥工业大学学报(自然科学版), 2012, 35(1), 99.
54 Matalkah F. Journal of Materials in Civil Engineering, 2021, 33(6), 04021119.
55 李志成.工程技术研究, 2021, 6(5), 11.
[1] 张曦挚, 崔红, 胡杨, 邓红兵, 王昊. SiC-ZrC陶瓷含量对C/C-SiC-ZrC复合材料性能的影响[J]. 材料导报, 2022, 36(Z1): 21120073-5.
[2] 张雷, 李姗姗, 庄毅, 唐毓婧, 罗欣. 碳纤维与玻-碳层间混杂2.5维机织复合材料的力学性能对比研究[J]. 材料导报, 2022, 36(Z1): 21100025-5.
[3] 王鹏. 机场道面混凝土性能提升研究[J]. 材料导报, 2022, 36(Z1): 22040083-4.
[4] 马帅, 金珊珊. 碳纤维增强复合材料对钢筋混凝土的加固作用[J]. 材料导报, 2022, 36(Z1): 22030217-5.
[5] 成俊辰, 赵志曼, 张晖, 全思臣, 吴磊, 廖仕雄. 稻壳磷建筑石膏抹灰砂浆技术性能研究[J]. 材料导报, 2022, 36(Z1): 21090274-5.
[6] 阎亚雯, 余竹焕, 高炜, 费祯宝, 刘旭亮, 王晓慧. 共晶高熵合金力学性能的研究进展[J]. 材料导报, 2022, 36(Z1): 21050264-7.
[7] 于江, 丁红瑜, 耿遥祥, 许俊华, 宰春凤. 选区激光熔化金属零件后处理技术研究进展[J]. 材料导报, 2022, 36(Z1): 22010033-9.
[8] 周港明, 杭美艳, 路兰, 王浩, 蒋明辉. 风积沙3D打印砂浆材料参数与各向异性研究[J]. 材料导报, 2022, 36(9): 21020081-5.
[9] 李伟, 曹睿, 闫英杰. 不同热处理态下粉末冶金花纹钢的组织性能及拉伸断裂行为[J]. 材料导报, 2022, 36(9): 21020104-7.
[10] 张文健, 郑浩, 李博文, 宋国君, 马丽春. 超支化磷腈衍生物修饰GO及其环氧复合材料的力学性能研究[J]. 材料导报, 2022, 36(8): 20110164-4.
[11] 杨来东, 李全安, 陈晓亚, 兖利鹏. Mg-Sm系镁合金的研究进展[J]. 材料导报, 2022, 36(7): 20070180-9.
[12] 于天阳, 马国政, 郭伟玲, 何鹏飞, 黄艳斐, 刘明, 王海斗. 冷喷涂不同陶瓷含量Cu-Ti3SiC2复合涂层的微观组织及性能研究[J]. 材料导报, 2022, 36(7): 21120172-6.
[13] 杨浩, 李尧, 郝建民. 激光增材制造Inconel 718高温合金的研究进展[J]. 材料导报, 2022, 36(6): 20080021-10.
[14] 褚洪岩, 高李, 秦健健, 汤金辉, 蒋金洋. 磺化石墨烯对再生砂超高性能混凝土力学性能和耐久性能的影响[J]. 材料导报, 2022, 36(5): 20090345-5.
[15] 张显, 蔡明, 孙宝忠. 植物纤维增强复合材料的湿热老化研究进展[J]. 材料导报, 2022, 36(5): 20100169-11.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed