Abstract: Cement-based tubes are widely used in the municipal, industrial, energy and other fields, and the accurate determination of the mechanical properties is very important to the structural performance evaluation and quality control of the tube components. To solve the difficult technical issues for the mechanical determination of the cement-based tubes, the analytic formulas of the elastic modulus and bending strength were deduced based on the theory of material mechanics for the split ring and closed ring samples, respectively. The split ring method, closed ring method and three-point bending method were used to evaluate the elastic modulus and bending strength of the split ring, closed ring and beam pieces which were prepared by the sulphoaluminate cement mortar, respectively. The experimental results show that the elastic modulus and bending strength measured by the three methods are very close, and demonstrate the validity and correctness of the split ring method and closed ring method.
1 Rostami V, Shao Y, Boyd A J. Durability of concrete pipes subjected to combined steam and carbonation curing[J]. Construction and Building Materials,2011,25:3345. 2 Fuente A, Escariz R C, Figueiredo A D, et al. A new design method for steel fibre reinforced concrete pipes[J]. Construction and Buil-ding Materials,2012,30:547. 3 Binici H, Durgun M Y, R zaolu T, et al. Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates[J]. Scientia Iranica,2012,19(3):366. 4 He T, Duan M L, Wang J L, et al. On the external pressure capacity of deepwater sandwich pipes with inter-layer adhesion conditions[J]. Applied Ocean Research,2015,52:115. 5 Noushini A, Aslani F, Castel A, et al. Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete[J]. Cement and Concrete Composites,2016,73:136. 6 Nath P, Sarker P K. Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete[J]. Construction and Building Materials,2017,130:22. 7 Chen B, Cai Y B, Ding J T, et al. Measurement of early age concrete elastic modulus based on thermal stress test[J]. Journal of Building Materials,2016,19(4):785(in Chinese). 陈波,蔡跃波,丁建彤,等.基于温度-应力试验的早龄期混凝土弹性模量量测[J].建筑材料学报,2016,19(4):785. 8 Tang J Y, Gao D Y, Zhu H T, et al. Influence of steel fiber on fle-xural property of high strength concrete[J]. Journal of Building Materials,2010,13(1):85(in Chinese). 汤寄予,高丹盈,朱海堂,等.钢纤维对高强混凝土弯曲性能影响的试验研究[J].建筑材料学报,2010,13(1):85. 9 Emirolu M, Beyciolu A, Yildiz S. ANFIS and statistical based approach to prediction the peak pressure load of concrete pipes including glass fiber[J]. Expert Systems with Applications,2012,39:2877. 10 中国建筑科学研究院.GB/T 50082-2009普通混凝土长期性能和耐久性能试验方法研究[S].北京:中国建筑工业出版社,2009. 11 Rao S K, Sravana P, Rao T C. Experimental studies in ultrasonic pulse velocity of roller compacted concrete pavement containing fly ash and M-sand[J]. International Journal of Pavement Research and Technology,2016,9:289. 12 ASTM Committe. ASTM C580-02 Standard test method for flexural strength and modulus of elasticity of chemical resistant mortars, grouts, monolithic surfacings, and polymer concretes[S].US:ASTM International,2012:3. 13 全国水泥标准化技术委员会.GB/T 17671-1999水泥胶砂强度检验方法(ISO法)[S].北京:中国标准出版社,1999:9. 14 中国建筑科学研究院.GB/T 50081-2002普通混凝土力学性能试验方法标准[S].北京:中国建筑工业出版社,2003:21. 15 Hajali M, Alavinasab A, Shdid C A. Structural performance of bu-ried prestressed concrete cylinder pipes with harnessed joints interaction using numerical modeling[J]. Tunnelling and Underground Space Technology,2016,51:11. 16 Huang J, Zhou Z D, Zhang D S, et al. Online monitoring of wire breaks in prestressed concrete cylinder pipe utilising fibre bragg gra-ting sensors[J]. Measurement,2016,79:112. 17 全国水泥制品标准化技术委员会.GB/T 11836-2009混凝土和钢筋混凝土排水管[S].北京:中国标准出版社,2009:2. 18 刘鸿文.材料力学 下册[M].第3版.北京:高等教育出版社,1992:183. 19 Wan D T, Bao Y W, Liu X G, et al. Evaluation of elastic modulus and strength of glass and brittle ceramic materials by compressing a notched ring specimen[J]. Advanced Materials Research,2011,177:114. 20 Liu Z, Bao Y W, Wan D T, et al. A novel method to evaluate Young’s modulus of ceramics at high temperature up to 2 100 ℃[J]. Ceramics International,2015,41:12835. 21 International Organization of standardization. ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings[S]. Switzerland: ISO,2015:5.