Preparation of Titanium-lithium Ion Sieve by the Inorganic Precipitation-peptization Method and Its Adsorption Performance
ZHANG Liyuan1,2, YOU Yaohui1,2, LIU Yiwu1,2, RUAN Shangquan1,2
1 College of Chemistry and Chemical Engineering, Neijiang Normal University, Neijiang 641112 2 Key Laboratory of Fruit Waste Treatment and Resource Recycling of the Sichuan Provincial College, Neijiang 641112
Abstract: H2TiO3-titanium-lithium adsorbent was prepared with titanium sulfate and lithium acetate as main materials via inorganic precipitation-peptization method. The specific surface area, pore structure, crystal phase, composition of chemical elements and concentrations of Li+ and Ti4+ were decided by BET, XRD, XPS and ICP-OES, respectively. The adsorption isotherm and kinetics were also studied. The results indicated that the number of mesoporous structure, the pore volume and the specific surface area of the product increased effectively after the addition of so-dium dodecyl benzene sulfonate (SDBS). The adsorption of lithium ion by the adsorbent accorded better with the Freundlich model as compared with the Langmuir model, which indicated that the adsorption of Li+ was not monolayer adsorption. The kinetic process of adsorption was coincident with the pseudo-second-order kinetic model, indicating that the adsorption style was chemical adsorption.
张理元, 由耀辉, 刘义武, 阮尚全. 无机沉淀胶溶法制备钛锂离子筛及其吸附性能研究[J]. 材料导报, 2019, 33(24): 4056-4061.
ZHANG Liyuan, YOU Yaohui, LIU Yiwu, RUAN Shangquan. Preparation of Titanium-lithium Ion Sieve by the Inorganic Precipitation-peptization Method and Its Adsorption Performance. Materials Reports, 2019, 33(24): 4056-4061.
Luo Y Z, Xu X, Zhang Y X, et al. Advanced Energy Materials, 2014, 4, 1400107.2 Huang H, Faulkner T, Barker J, et al. Journal of Power Sources, 2009, 189, 748.3 Luo Q P, Guo P C, Li C Z, et al. Hydrometallurgy of China, 2012, 31(2), 67(in Chinese).罗清平, 郭朋成, 李存增, 等. 湿法冶金, 2012, 31(2), 67.4 Zhao X, Wu H H, Duan M S, et al. Fluid Phase Equilibria, 2018, 459, 129.5 Zhang L C, Li L J, Shi D, et al. Separation and Purification Technology, 2017, 188, 167.6 Shi C L, Jing Y, Xiao J, et al. Hydrometallurgy, 2017, 169, 314.7 Xiang W, Liang S K, Zhou Z Y, et al. Hydrometallurgy, 2016, 166, 9.8 Wang S L, Zheng S L, Wang Z M, et al. Chemical Engineering Journal, 2018, 332, 160.9 Paranthaman M P, Li L, Luo J Q, et al. Environmental Science Technology, 2017, 51, 13481.10 Song J F, Nghiem L D, Li X M, et al. Environmental Science: Water Research & Technology, 2017, 3, 93.11 He L H, Xu W H, Song Y F, et al. Separation and Purification Techno-logy, 2017, 187, 214.12 Swain B. Separation and Purification Technology, 2017, 172, 388.13 Li S P, Yin X S, Sun S Y, et al. Chemical Engineering Science, 2010, 65, 169.14 Xu H, Chen C G, Song Y H, et al. The Chinese Journal of Nonferrous Metals, 2013, 28, 2868.15 Ji Z Y, Yuan J S, Li X G. Chemical Engineering, 2007, 35, 9.16 Hagh N M, Amatucci G G. Journal of Power Sources, 2014, 256, 457.17 Zheng J G. Study on preparation and Li+ adsorption exchange property of titanium and zirconium compound oxides. Master’s Thesis, Qingdao University of Science and Technology, China, 2016(in Chinese).郑建国. 钛、锆复合氧化物的合成及对Li+的吸附交换性能研究. 硕士学位论文, 青岛科技大学, 2016.18 Shi X C, Zhang Z B, Zhou D F, et al. Transactions of Nonferrous Metals Society of China, 2013, 23, 253.19 Yu C L, Yanagisawa K, Kamiya S. Ceramics International, 2014, 40(1), 1901.20 Zhang L Y, Zhou D L, Yao Q Q, et al. Applied Surface Science, 2016, 368, 82.21 Zhang L Y, Zhou D L, He G, et al. Materials Letters, 2014, 135, 206.22 Ma L W, Chen B Z, Chen Y. Microporous and Mesoporous Materials, 2011, 142, 147.23 Zhang L Y, Zhou D L, He G, et al. Materials Letters, 2015, 145, 351.24 Zhang L Y, Liu Y W, Huang L, et al. RSC Advances, 2018, 8, 1385.25 Tkalya E E, Ghislandi M, With G D. Current Opinion in Colloid and Interface Science, 2012, 17, 225.26 Dai Y M, Mao I H, Chen C C. Journal of the Taiwan Institute of Chemical Engineers, 2017, 70, 260.27 Barbosa L I, González J A, Ruiz M D C. Thermochimica Acta, 2015, 605, 63.28 Ma Y F, Zhang J L, Tian B Z, et al. Journal of Hazardous Materials, 2010, 182, 386.29 Tielens F, Calatayud M, Beltrán A, et al. Journal of Electroanalytical Chemistry, 2005, 581(2), 216.30 Marcus Y. Journal of the Chemical Society Faraday Transactions, 1991, 87, 2995.31 Vijaykumar M, Kerisit S, Yang Z, et al. Journal of Physical Chemistry C, 2009, 113, 20108.32 Hosogi Y, Kato H, Kudo A. Journal of Materials Chemistry, 2008, 18, 647.33 Denisova T A, Maksimova L G, Polyakov E V, et al. Russian Journal of Inorganic Chemistry, 2006, 51(5), 691.34 Ariza M J, Jones D J, Roziere J, et al. Chemistry of Materials, 2006, 18, 1885.35 Ye J, Cong X, Wu Y, et al. Applied Surface Science, 2015, 356, 128.36 Wang L, Meng C G, Han M, et al. Journal of Colloid and Interface Scie-nce, 2008, 325(1), 31.37 Han R, Zou W, Wang Y, et al. Journal of Environmental Radioactivity, 2007, 93, 127.