Please wait a minute...
材料导报  2022, Vol. 36 Issue (23): 21030191-8    https://doi.org/10.11896/cldb.21030191
  高分子与聚合物基复合材料 |
复合材料液体成型树脂流动前锋监测技术研究进展
禹岳1,2,3, 王喆4, 姚沛衡1, 姚文胜2,3, 杨辰龙1,*
1 浙江大学流体动力与机电系统国家重点实验室,杭州 310027
2 浙江省特种设备科学研究院,杭州 310020
3 浙江省特种设备安全检测技术研究重点实验室,杭州 310020
4 武汉第二船舶设计研究所,武汉 430200
Research Progress on Monitoring Methods for Resin Flow Front During Liquid Composite Molding Process
YU Yue1,2,3, WANG Zhe4, YAO Peiheng1, YAO Wensheng2,3, YANG Chenlong1,*
1 State Key Lab of Fluid Power and Mechatronic Systems,Zhejiang University, Hangzhou 310027, China
2 Zhejiang Academy of Special Equipment Science, Hangzhou 310020, China
3 Key Laboratory of Safety Testing Technology for Special Equipment in Zhejiang Province, Hangzhou 310020, China
4 Wuhan Second Ship Design and Research Institute, Wuhan 430200, China
下载:  全 文 ( PDF ) ( 17644KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 纤维复合材料是一种被广泛应用于航空航天工业的材料。复合材料液体成型(LCM)工艺是一种常见的纤维复合材料制备工艺。而使用LCM工艺生产的纤维复合材料可能会由于超前-迟滞效应产生缺陷,影响纤维复合材料的使用性能。通过监测LCM工艺中树脂流动前锋可以优化树脂注入策略,减少内部缺陷的产生,提升纤维复合材料制成品的质量。本文介绍了光纤传感器监测技术、CCD(电荷耦合器件)摄像机监测技术、热电偶监测技术、压力传感器监测技术和超声传感器监测技术这五种树脂流动前锋监测技术的国内外研究现状,并重点介绍了超声传感器监测技术主要使用的两种监测方法,即超声纵波监测法和超声Lamb波监测法。最后,分析总结了在纤维预成型体中树脂流动前锋超声监测系统研究中目前存在的难点以及未来的发展方向。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
禹岳
王喆
姚沛衡
姚文胜
杨辰龙
关键词:  纤维复合材料  复合材料液体成型  树脂流动前锋监测  超声监测    
Abstract: Fibrous composite is widely used in the space industry. Liquid composite molding (LCM) is a common fabrication of fibrous composite. And there might be defects in the fibrous composite fabricated through LCM process due to the lead-lag effect, which would affect the perfor-mance of the fibrous composite. By monitoring the resin flow front during LCM process, the injection of resin can be optimized to reduce the internal defects and improve the quality of the fibrous composite. This review introduces the research status on five types of resin flow front monitoring method: fiber optic sensor monitoring method, CCD camera monitoring method, thermocouple monitoring method, pressure sensor monitoring method and ultrasonic monitoring method, and introduces two main monitoring methods used in ultrasonic monitoring method, which are longitudinal wave method and Lamb wave method. Finally, this review summarizes the difficulties in the research of ultrasonic monitoring systems for resin flow fronts during LCM process and forecasts the possible future research directions.
Key words:  fibrous composite    liquid composite molding    resin flow front monitoring    ultrasonic monitoring
发布日期:  2022-12-09
ZTFLH:  TB553  
基金资助: 山西省科技重大专项项目(20201102003)
通讯作者:  *yclzju@163.com   
作者简介:  禹岳,2019年6月毕业于浙江大学,获得工学学士学位。2022年9月毕业于浙江大学,获得工学硕士学位。目前就职于浙江省特种设备科学研究院,主要研究领域为超声无损检测。
杨辰龙,浙江大学机械工程学院副教授,1999年、2002年于太原科技大学分别获得学士、硕士学位,2005年于浙江大学获得博士学位,主要从事复合材料超声检测及成像方面的研究。近年来在Nondestructive Testing and Evaluation、Journal of Sound and Vibration、Applied Sciences、Sensors、Journal of Wuhan University of Technology-Mater. Sci. Ed、Russian Journal of Nondestructive Testing、《光学精密工程》《振动与冲击》等期刊发表SCI/EI论文20多篇。
引用本文:    
禹岳, 王喆, 姚沛衡, 姚文胜, 杨辰龙. 复合材料液体成型树脂流动前锋监测技术研究进展[J]. 材料导报, 2022, 36(23): 21030191-8.
YU Yue, WANG Zhe, YAO Peiheng, YAO Wensheng, YANG Chenlong. Research Progress on Monitoring Methods for Resin Flow Front During Liquid Composite Molding Process. Materials Reports, 2022, 36(23): 21030191-8.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.21030191  或          http://www.mater-rep.com/CN/Y2022/V36/I23/21030191
1 Du S Y. Science & Technology Review, 2013, 31(7),3 (in Chinese).
杜善义. 科技导报,2013,31(7),3.
2 Zhao A A, Wang L W, Wang H J, et al. Engineering Plastics Application, 2018, 46(4),145(in Chinese).
赵安安, 王林文, 王浩军, 等. 工程塑料应用, 2018, 46(4),145.
3 Crowley D M, Wardc, Potter K. SAE Technical Paper, 2013, 7(1),2144.
4 Li L. Aeronautical Manufacturing Technology, 2017(11),105(in Chinese).
李林. 航空制造技术, 2017(11),105.
5 Xu Z. Synthetic Materials Aging and Application, 2016, 45(2),83(in Chinese).
徐竹. 合成材料老化与应用,2016,45(2),83.
6 Li C S, Liang J, Zhang B M, et al. Journal of Tsinghua University (Science and Technology), 2002(2),161(in Chinese).
李辰砂, 粱吉, 张博明, 等. 清华大学学报(自然科学版), 2002(2),161.
7 Riad K, Obaidallah E, Rofaida B. Automation in Construction, 2018(72), 88
8 Wang Y S, Qing X L. Acta Materiae Compositae Sinica, 2016, 33(1),1(in Chinese).
王奕首, 卿新林. 复合材料学报, 2016, 33(1),1.
9 Michael W, Nielsen, et al. Journal of Composite Materials, 2014, 48(3), 365.
10 Hu Y, Huang G F, Liang K, et al. Composites Science and Engineering, 2017(5),11(in Chinese).
胡焱, 黄贵飞, 梁科, 等. 玻璃钢 /复合材料, 2017(5),11.
11 Tang Y, He B B, Li L J, et al. China Plastics Industry, 2007(S1),25(in Chinese).
唐渊, 何波兵, 李兰军, 等. 塑料工业, 2007(S1),25.
12 Zhang X Y. Study on the curing behavior of civil aircraft composite based on ultrasonic on-line monitoring. Master's Thesis, Civil Aviation Flight University of China, China, 2015 (in Chinese).
张骁亚. 基于超声在线监测的民机复合材料固化行为研究. 硕士学位论文, 中国民用航空飞行学院, 2015.
13 Liu Z H, Mu Y L, Song G R, et al. Chinese Journal of Scientific Instrument, 2015, 36(9),1961(in Chinese).
刘增华, 穆云龙, 宋国荣, 等. 仪器仪表学报, 2015, 36(9),1961.
14 Laurenzi S, Casini A, Pocci D. Composites Part A: Applied Science and Manufacturing, 2014, 67,221.
15 Luo C Y, Xiong J J, Yi X S, et al. Acta Materiae Compositae Sinica, 2011, 28(3),203(in Chinese).
罗楚养, 熊峻江, 益小苏, 等. 复合材料学报, 2011, 28(3),203.
16 Li L T. Research on resin flow front of vacuum infusion molding process. Master's Thesis, Dalian University of Technology, China, 2013 (in Chinese).
李龙涛. 真空导入模塑工艺树脂流动前沿研究. 硕士学位论文, 大连理工大学, 2013.
17 Yang J S, Xiao J Y, Zeng J C. et al. Aerospace Materials & Technology, 2010, 40(1),5(in Chinese).
杨金水,肖加余,曾竟成,等. 宇航材料工艺, 2010, 40(1),5.
18 Yang J S. Study on VIMP manufacturing and performance for thick-section carbon fiber composites. Ph.D. Thesis, National University of Defense Technology, China, 2012 (in Chinese).
杨金水. 厚截面碳纤维复合材料VIMP工艺制备与性能研究. 博士学位论文, 国防科学技术大学, 2012.
19 Sanchez D M, Gresil M, Soutis C. Composites Science and Technology, 2015, 120, 49.
20 Zhu Y D. Research on the on-line sensing and monitoring system in liquid composites molding. Ph.D. Thesis, Wuhan University of Technology, China, 2005 (in Chinese).
祝颖丹. LCM技术在线监控体系的研究. 博士学位论文, 武汉理工大学,2005.
21 Montés N, Sánchez F, García J A, et al. AIP Conference Proceedings, 2007, 907(1),902.
22 Wang P, Demirel M, Drapier I S, Molimard J. Canada: the 9th International Conference on Flow Processes in Composite Materials, 2008, 8(7),62.
23 Spiridon K, Alexander M, Maximilian T, et al. Journal of Reinforced Plastics & Composites, 2015, 34(12),1015.
24 Tuncol G, Danisman M, Kaynar A. Composites Part A: Applied Science and Manufacturing, 2007, 38(5),1363.
25 Maryam K M. Embedded Sensors to Monitor Production of Composites: From Infusion to Curing of Resin. Ph.D. Thesis, Bremen university, Germany,2017.
26 Stephen L W. Reinforced Plastics, 2008, 52(10),28.
27 Stephen L W. Reinforced Plastics, 2001, 44(2),32.
28 Maryam, Kahali, Moghaddam, et al. Journal of Composite Materials, 2017, 51(25),3585.
29 Kahali M, Moghaddam, Arne, et al. Sensors (Basel, Switzerland), 2015, 15(4),7499.
30 Kahali M M, Arne B, Adli D, et al. Proceedings, 2017, 1(4),339.
31 Schmachtenberg E, Schulte zur H J, Töpke J. Polymer Testing, 2005, 24(3),330.
32 Shepard D D, Smith K R. Sensor Review, 1997, 90(6),187.
33 Konstantopoulos S, Fauster E , Schledjewski R. Express Polymer Letters, 2014, 8(11),823.
34 Hilmer P, Weiland M. Advanced Aerostructure Technology Forum 2016,2016,1.
35 Nalla A R. Close-loop flow control approaches for VARTM. Ph.D. Thesis, University of Delaware, USA,2005.
36 William L C. Resin transfer molding process monitoring and control. Ph.D. Thesis, the University of Dayton, USA, 2008.
37 Luthy. Three-dimensional permeability measurements based on direct current and ultrasound monitoring techniques. Ph.D. Thesis, Swiss Federal Institute of Technology Zurich, Swiss,2003.
38 Yao W Y. Research on ultrasonic monitoring technology of resin flow front in fiber reinforced composite perform. Master's Thesis, Zhejiang University, China, 2021 (in Chinese).
姚文胜. 纤维增强复合材料预成型体中树脂流动前锋超声监测技术研究. 硕士学位论文,浙江大学, 2021.
39 Schmachtenberg E, Heide J S Z, Topker J. Polymer Testing, 2005, 24(3),330.
40 Lionetto F, Rizzo R, Luprano V A M, et al. Materials Science and Engineering: A, 2004, 370(1),284.
41 Pindinelli C, Montagna G, Luprano V A M, et al. Macromolecular Symposia, 2002, 180(1),73.
42 Liebers N, Stefaniak D, Kleineberg M, et al. International Conference on Composite Materials (ICCM). 2013(11), 2111.
43 Huang G F. Study on monitoring curing process of epoxy resin under medium temperature condition by ultrasonic technique. Master's Thesis, Civil Aviation Flight University of China, China, 2018 (in Chinese).
黄贵飞. 环氧树脂中温固化的超声波监测研究. 硕士学位论文, 中国民用航空飞行学院,2018.
44 Wang Y S, Li Y K, Wu D, et al. Aeronautical Manufacturing Technology, 2017(19),50(in Chinese).
王奕首, 李煜坤, 吴迪, 等. 航空制造技术,2017(19),50.
45 Li Y K. Real-time monitoring technology of liquid composite molding process based on piezoelectric sensor network. Master's Thesis, Xiamen University, China, 2018 (in Chinese).
李煜坤. 基于压电传感网络的复合材料液体成型过程实时监测技术. 硕士学位论文, 厦门大学,2018.
46 Victor G. Structural health monitoring with piezoelectric wafer active sensors, Academic Press, UK, 2014.
47 Xiao L, Yukun L, Jianjian Z, et al. Polymer Composites, 2020, 42(1),1.
[1] 张勇, 高相东, 姚佳祺, 吴永庆, 赵祥. SiO2-Al2O3气凝胶及纤维增强复合材料制备技术研究进展[J]. 材料导报, 2022, 36(23): 21030207-9.
[2] 丁叁叁, 刘克健. 高速列车用碳纤维复合材料结构损伤修复门槛值研究[J]. 材料导报, 2021, 35(Z1): 613-616.
[3] 陈琨, 张祥林, 安子乾, 程羽佳, 程小全, 冯振宇. 温度对碳纤维平纹布正交层合板拉伸疲劳性能的影响[J]. 材料导报, 2021, 35(16): 16195-16200.
[4] 魏玉鹏, 朱俊志, 蔺景鹏, 申永前, 江恬恬, 李庆林, 王海燕, 喇培清. 碳微/纳米纤维复合微波吸收材料的研究进展[J]. 材料导报, 2021, 35(15): 15205-15211.
[5] 张少辉, 王艳, 牛荻涛. 废旧纤维在水泥基材料中的应用研究进展[J]. 材料导报, 2020, 34(23): 23042-23050.
[6] 张绪, 冯瑞, 张晔, 郭卫, 刘富. 民机复合材料帽型长桁压缩承载力分析与试验[J]. 材料导报, 2019, 33(Z2): 215-221.
[7] 韩艳, 王龙龙, 刘志浩. CFRP板加固含I型裂纹混凝土的断裂扩展规律[J]. 材料导报, 2019, 33(Z2): 304-308.
[8] 李红, 刘旭升, 张宜生, JacekSenkara, 李光瀛, 马鸣图. 新能源电动汽车异种材料连接技术的挑战、趋势和进展[J]. 材料导报, 2019, 33(23): 3853-3861.
[9] 杨洁, 吴宁, 潘月秀, 朱世鹏, 焦亚男, 陈利. 环氧改性水性聚氨酯上浆剂对碳纤维/氰酸酯树脂复合材料界面性能的影响[J]. 材料导报, 2019, 33(10): 1762-1767.
[10] 崔海坡, 张梦雪, 张阿龙. 碳纤维复合材料假脚冲击后疲劳性能影响因素分析*[J]. 《材料导报》期刊社, 2017, 31(18): 150-154.
[1] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4] Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5] Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6] Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7] Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8] Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9] Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10] Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed