Abstract: The photothermal sterilization coating was prepared by using sulfuric acid doped polyaniline (PANI) as photothermal material for the first time. The photothermal sterilization experiments was carried out, taking the flash light as light source. The UV-Vis absorption and photothermal conversion performance of PANI coatings were investigated. The effects of the different flash distances on the PANI coatings and the sterilization performance of the coating were explored. The results showed that the doping of sulfuric acid was beneficial for improving the visible light absorption and photothermal conversion performance of the material. Too close irradiation would make the material melt and dedoped. It could be found in the sterilization experiment that sulfuric acid-doped PANI coating exerted marvelous sterilization effect through a millisecond flash. Under va-rious irradiation distances, there existed a “Trade Off” relationship between the sterilization rate and reusability of the coating. When the irradiation distance was 3 cm, the coating presented both favorable sterilization performance and satisfactory reusability.
1 Li W Y, Zhao G J, Zhang Q H. Materials Review A:Review Papers,2015,29(10),11(in Chinese). 李为义, 赵广杰, 张求慧. 材料导报:综述篇,2015, 29(10),11. 2 Vikesland P J, Wigginton K R.Environmental Science & Technology, 2010, 44(10),3656. 3 Ma T, Li Y G .Materials Review A:Review Papers,2015,29(7), 98(in Chinese). 马涛, 李运刚. 材料导报:综述篇,2015,29(7),98. 4 Ray P C, Khan S A, Singh A K, et al. Chemical Society Reviews, 2012, 41(8),3193. 5 Yuan Q K. Chinese Journal of Disinfection, 2010, 27(2),234(in Chinese). 袁洽劻. 中国消毒学杂志, 2010, 27(2),234. 6 Shi N L, Liu B Y, Zhang Y Y, et al.Journal of Chienese Society for Corrosion and Protection, 2011,31(5), 385(in Chinese). 石南林, 刘宝蕴, 张彦英,等. 中国腐蚀与防护学报, 2011, 31(5),385. 7 Hsiao C W, Chen H L, Liao Z X, et al.Advanced Functional Materials, 2015, 25(5),721. 8 Dong X L, Tang Y A, Wu M, et al. Journal of Biological Engineering, 2013, 7(1),1. 9 Tian T F, Shi X Z, Cheng L, et al.ACS Applied Materials & Interfaces, 2014, 6(11), 8542. 10 Norman Orman R S, Stone Tone J W, Gole A, et al.Nano Letters, 2008, 8(1),302. 11 Song X, Chen Q, Liu Z.Nano Research, 2015, 8(2), 340. 12 Albuquerquelbuquerque J E D, Melo W L B, Fariaaria R M. Review of Scientific Instruments, 2003, 74(1), 306. 13 Huang W C, Tsai P J, Chen Y C. Small, 2009, 5(1),51. 14 Zhou J, Lu Z, Zhu X, et al. Biomaterials, 2013, 34(37), 9584. 15 Huang J X, Kaner R B. Nature Materials, 2004, 3(11),783. 16 Albuquerque J E D, Melo W L B, Faria R M. Molecular Crystals and Liquid Crystals, 2002, 374,379. 17 Kim S H, Kang E B, Jeong C J, et al. ACS Applied Materials & Interfaces, 2015, 7(28),15600. 18 Ju E, Dong K, Liu Z, et al. Advanced Functional Materials, 2015, 25(10),1574. 19 Motheo A J, Santos J R, Venancio E C, et al. Polymer, 1998, 39(26),6977. 20 Li Z Y, Yang J, Xiao C F.Textile Science Research, 2006(3),21(in Chinese). 李志勇, 杨喆, 肖长发. 纺织科学研究, 2006(3),21. 21 Li D, Kaner R B. Chemical Communications, 2005, 26(26),3286. 22 Xia Y N. Nature Materialsr, 2004, 3(11), 753. 23 Huang J, Kaner R B. Angewandte Chemie, 2004, 43(43), 5817. 24 Qian Q, Wang J, Yan F, et al. Angewandte Chemie, 2014, 53(17), 4465. 25 Kim B J, Oh S G, Han M G, et al. Synthetic Metals, 2001, 122(2),297. 26 Wessling B, Srinivasan D, Rangarajan G, et al.European Physical Journal E, 2000, 2(3), 207. 27 Xing C J, Zhang Z M, Yu L M, et al. Progress in Organic Coatings, 2014, 77,354.