Please wait a minute...
材料导报  2024, Vol. 38 Issue (21): 23070147-6    https://doi.org/10.11896/cldb.23070147
  无机非金属及其复合材料 |
全程老化沥青中温抗疲劳性能及预测模型研究
刘亚敏*, 韩旭晖, 高晨光, 钟国亮
长安大学公路学院,西安 710064
Study on Fatigue Resistance and Prediction Model of Whole Process Aged Asphalt at Medium Temperature
LIU Yamin*, HAN Xuhui, GAO Chenguang, ZHONG Guoliang
School of Highway, Chang'an University, Xi'an 710064, China
下载:  全 文 ( PDF ) ( 6394KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 为分析老化沥青胶结料的中温抗疲劳性能,以三种基质沥青和两种改性沥青为试验材料,基于线性振幅扫描试验和黏弹性连续损伤模型,建立了预测模型。结果表明,在线性振幅扫描试验中,随着频率的增大和老化时间的延长,沥青的复合剪切模量增大,相位角减小;改性沥青的相位角明显小于基质沥青,表明改性剂可以增强沥青胶结料的弹性;基质沥青的疲劳寿命随老化时间延长而缩短,其变化存在一个平缓过渡期;精度检验结果表明,建立的非线性预估模型拟合程度高,可用于不同老化时间沥青胶结料疲劳寿命的预测;推荐采用残留疲劳寿命作为老化沥青胶结料中温抗疲劳性能工程的判断指标,并针对不同类型沥青提出了相应技术要求。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘亚敏
韩旭晖
高晨光
钟国亮
关键词:  道路工程  沥青胶结料  中温抗疲劳性能  线性振幅扫描试验  黏弹性连续损伤模型    
Abstract: In order to analyze the medium temperature fatigue resistance of aged asphalt binders, three matrix asphalts and two modified asphalts were used as test materials, based on linear amplitude scanning tests and viscoelastic continuum damage models, a prediction model was created. The findings demonstrate that in the linear amplitude scanning test, the asphalt's composite shear modulus increases with frequency and aging time while the phase angle decreases; the phase angle of the modified asphalt is significantly smaller than that of the matrix asphalt, demonstrating that the modifier can increase the elasticity of the asphalt binder; the fatigue life of the matrix asphalt decreases with the increase of aging time, and there is a gentle transition period for its change. The accuracy test results reveal that the residual fatigue life is advised as an indicator of the medium temperature fatigue resistance of ageing asphalt binders, and the corresponding technical requirements are proposed for various types of asphalt. The results of the accuracy tests demonstrate that the non-linear prediction model is a good fit and can be used to predict the fatigue life of asphalt binders at different aging times.
Key words:  road engineering    asphalt binder    medium temperature fatigue resistance    linear amplitude sweep test    viscoelastic continuous damage model
出版日期:  2024-11-10      发布日期:  2024-11-11
ZTFLH:  U414  
基金资助: 国家自然科学基金(52278431;51608048);福建省交通科技项目(202236)
通讯作者:  *刘亚敏,工学博士,长安大学公路学院副教授、硕士研究生导师,主要研究方向为道路材料、道路表面功能评价与改善技术等。目前主持国家自然科学基金青年项目、陕西省交通科技项目以及国家级大学生创新创业项目各1项;在国内外高水平期刊公开发表学术论文近20篇,其中SCI/EI检索10余篇,获国家授权专利6项。liuyamin@chd.edu.cn   
引用本文:    
刘亚敏, 韩旭晖, 高晨光, 钟国亮. 全程老化沥青中温抗疲劳性能及预测模型研究[J]. 材料导报, 2024, 38(21): 23070147-6.
LIU Yamin, HAN Xuhui, GAO Chenguang, ZHONG Guoliang. Study on Fatigue Resistance and Prediction Model of Whole Process Aged Asphalt at Medium Temperature. Materials Reports, 2024, 38(21): 23070147-6.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.23070147  或          http://www.mater-rep.com/CN/Y2024/V38/I21/23070147
1 Tangella S, Craus J, Deacon J A, et al. Strategic highway research program project A-003-A, Institute of Transportation Studies, University of California Berkeley, United States, 1990.
2 Wen H, Kim Y R. Transportation Research Record: Journal of the Transportation Research Board, 2002, 1789, 66.
3 Kim Y R, Baek C, Underwood B S, et al. Korean Society of Civil Engineers Journal of Civil Engineering, 2008, 12(2), 109.
4 Wen H, Li X. American Society of Civil Engineers Journal of Materials in Civil Engineering, 2013, 25(8), 1006.
5 Wen H. International Journal of Pavement Engineering, 2013, 14(6), 561.
6 Wen H, Bhusal S, Sun R. American Society of Civil Engineers Journal of Materials in Civil Engineering, 2014, 26(5), 04014024.
7 Zheng J, Lyu S, Tian X. Journal of China & Foreign Highway, 2005, 25(3), 94(in Chinese).
郑健龙, 吕松涛, 田小革. 中外公路, 2005, 25(3), 94.
8 Zheng J, Lyu S. China Journal of Highway and Transport, 2009, 22(5), 21(in Chinese).
郑健龙, 吕松涛. 中国公路学报, 2009, 22(5), 21.
9 Zheng J, Ma J, Lyu S. Engineering Mechanics, 2010, 27(3), 116. (In Chinese)
郑健龙, 马健, 吕松涛. 工程力学, 2010, 27(3), 116.
10 Anderson D A,Christensen D W, Bahia H U, et al. Strategic highway research program-A-369, National Research Council, United States, 1994.
11 Peterson J C, Robertson R E, Branthaver J F, et al. National corporation for housing partnerships report 459, Transportation Research Board, National Research Council, United States, 1994.
12 Bahia H U, Hanson D I, Zeng M, et al. National corporation for housing partnerships report 459, Transportation Research Board, National Research Council, United States, 2001.
13 Johnson C M. Estimating asphalt binder fatigue resistance using an acce-lerated test method. Ph.D. Thesis, University of Wisconsin-Madison, United States, 2010.
14 Hintz C, R Velasquez A, Johnson C M, et al. Transportation Research Record: Journal of the Transportation Research Board, 2011, 2207(1), 99.
15 Hintz C. Understanding mechanisms leading to asphalt binder fatigue. Ph.D. Thesis, University of Wisconsin-Madison, United States, 2012.
16 Hintz C, Bahia H. Transportation Research Record: Journal of the Transportation Research Board, 2013, 2370(1), 10.
17 Botella R, Pérez-Jiménez F E, Miró R. Construction and Building Mate-rials, 2012, 36, 906.
18 Kim Y, Lee H J, Little D N, et al. Journal of Association of Asphalt Pa-ving Technologists. 2006, 75, 755.
19 Cao W, Wang Y, Wang C. Construction and Building Materials. 2019, 208, 686.
20 Liang B, Lan F, Zheng J. Materials Reports, 2021, 35(9), 9083(in Chinese).
梁波, 兰芳, 郑健龙.材料导报, 2021, 35(9), 9083.
21 Zhu H, Fan S, Lu Z, et al. Journal of Highway and Transportation Research and Development, 2019, 36 (9), 8(in Chinese).
朱洪洲, 范世平, 卢章天, 等. 公路交通科技, 2019, 36(9), 8.
22 Zhou S, Shi J, Zhang R, et al. Petroleum Asphalt,2018,32 (2), 27(in Chinese).
周水文, 时敬涛, 张蓉,等. 石油沥青, 2018, 32(2), 27.
23 JTG E20-2011, Standard test methods of bitumen and bituminous mixtures for highway engineering, China Communication Press, China, 2011(in Chinese).
JTG E20-2011,公路工程沥青及沥青混合料试验规程, 人民交通出版社, 2011.
24 Cheng X, Han S, Liu Y, et al. Construction and Building Materials, 2019, 229, 116850.
25 Johnson C M. Estimating asphalt binder fatigue resistance using an accelerated test method. Ph.D. Thesis, University of Wisconsin-Madison, United States, 2010.
26 Zhang C, Ren Q, Qian Z, et al. Materials, 2019, 12, 1508.
27 Bahia H, Tabatabaee H A, Faheem A. Wisconsin highway research program project: 0092-13-02 Final Report, University of Wisconsin Madison, United States, 2013.
[1] 田威, 云伟, 党可欣, 李腾. 不同钙源EICP溶液改良路基黄土动力特性研究[J]. 材料导报, 2024, 38(9): 22110275-9.
[2] 王超, 宋立昊, 孙彦广, 宫官雨. 道路沥青疲劳与断裂特性研究进展及发展趋势[J]. 材料导报, 2024, 38(9): 22090197-9.
[3] 延西利, 郑涛, 蒋双全, 李卫成. 沥青温拌技术分类及温拌效果的试验评价方法[J]. 材料导报, 2024, 38(4): 22080003-8.
[4] 兰添晖, 刘旭, 贾存兴, 王凌一, 张军朝, 马国伟, 张默. 沥青胶结料应变延迟恢复特性的动态剪切流变试验表征[J]. 材料导报, 2024, 38(4): 22020138-7.
[5] 郑直, 郭乃胜, 金鑫, 房辰泽, 尤占平, 谭忆秋. 水性丙烯酸交通标线涂料研究现状与发展趋势[J]. 材料导报, 2024, 38(21): 22120007-12.
[6] 唐杰, 赵华, 高红成. 碳化硅粉填充沥青混合料微波自愈合性能及合理掺量[J]. 材料导报, 2024, 38(20): 23080070-10.
[7] 张磊, 王鹏, 杨永志, 邢超, 谭忆秋. 基于LCA的不同设计寿命沥青路面能耗排放分析[J]. 材料导报, 2024, 38(20): 23080071-10.
[8] 王超, 任正阳, 周波超, 宫官雨, 季晓斌. 不同种类道路沥青材料异味特征及析源分析[J]. 材料导报, 2024, 38(2): 22040368-5.
[9] 况栋梁, 马小军, 马晓燕, 袁斌, 侯俊鹏, 蔡军. 废机油残留物再生剂对老化沥青动态力学性能和组分迁移的影响[J]. 材料导报, 2024, 38(2): 22050182-8.
[10] 王志臣, 孙雅珍, 郭乃胜. 基于连续时间谱的沥青混合料黏弹性参数换算[J]. 材料导报, 2024, 38(18): 22120218-6.
[11] 董仕豪, 韩森, 宿金菲, 陈德, 苏会锋. 沥青路面表面纹理三维评价方法及其计算边界条件分析[J]. 材料导报, 2024, 38(18): 23050210-9.
[12] 赵晓康, 张久鹏, 胡勤石, 裴建中, 程科, 张柳. 长余辉水性道面标线涂料的制备与路用性能[J]. 材料导报, 2024, 38(15): 23020088-7.
[13] 关博文, 张硕文, 吴佳育, 王发平, 陈晓堃. 基于残余砂浆附着特征的再生混凝土硫酸盐传输模型[J]. 材料导报, 2024, 38(15): 23040046-8.
[14] 张庆宇, 罗京, 赵毅, 刘英, 张新永. 微波加热集料的传热特性及其影响因素[J]. 材料导报, 2023, 37(8): 21110074-8.
[15] 王梦浩, 王朝辉, 高璇, 高峰, 肖绪荡. 公路路面乳化沥青冷再生技术综述[J]. 材料导报, 2023, 37(7): 21080241-11.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed