Please wait a minute...
材料导报  2024, Vol. 38 Issue (3): 22060075-7    https://doi.org/10.11896/cldb.22060075
  无机非金属及其复合材料 |
新材料引领支撑绿色低碳经济发展
王镇1,2, 肖丽俊1,*, 干勇1,3,*
1 中国钢研科技集团有限公司,北京 100081
2 中国产业基础能力发展战略研究院,北京 100081
3 中国工程院,北京 100088
Advanced Materials Lead and Support the Development of Green and Low-carbon Economy
WANG Zhen1,2, XIAO Lijun1,*, GAN Yong1,3,*
1 Central Iron and Steel Research Institute, Beijing 100081, China
2 Chinese Academy of Strategic Studies on Industrial Competency, Beijing 100081, China
3 Chinese Academy of Engineering, Beijing 100088, China
下载:  全 文 ( PDF ) ( 4395KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 绿色低碳是社会经济发展的必然趋势,新材料在绿色经济发展过程中发挥了重要的支撑和引领作用。本文从工艺流程进步、产品技术开发、前瞻领域布局等方面分析了新材料在绿色低碳发展中的重要作用和发展方向。针对新材料绿色低碳发展面临的需求,从产业结构调整、产业链协同创新发展等方面对未来趋势进行总结研判,并提出发展全生命周期循环经济、完善标准体系、强化政策支持等促进新材料绿色发展的实施路径,为实现新材料产业绿色低碳发展提供观点支撑和参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王镇
肖丽俊
干勇
关键词:  新材料  绿色  低碳  发展    
Abstract: Green and low-carbon innovation is an inevitable trend toward social and economic development. Advanced materials play a pivotal role in supporting the realization of green economy. The paper analyzes the role of advanced materials in green and low-carbon development based on process improvement, product technology development, and vision field layout. It describes the requirements for green low-carbon development and the future development trend for advanced materials—considering factors ranging from the adjustment of structure to collaborative innovation within the industrial chain. It proposes an implementation path for the green development of advanced materials, such as promoting the extended life cycles via a circular economy, perfecting our own standard system, and strengthening policy support. This proposition provides support and reference for envisioning and realizing green and low-carbon development of the advanced materials industry.
Key words:  advanced material    green economy    low-carbon    development
出版日期:  2024-02-10      发布日期:  2024-02-19
ZTFLH:  T-1  
通讯作者:  *肖丽俊, 钢铁研究总院高级工程师。2010年1月在钢铁研究总院冶金工程专业获博士学位, 2010年7月至2013年6月在钢铁研究总院材料科学与工程专业博士后流动站工作。主要从事冶金工艺和新材料的研究工作, 发表论文30余篇。lijxiao@163.com;
干勇,中国工程院院士,中国工程院原副院长,国家新材料产业发展专家咨询委员会主任委员,中国科协先进材料学会联合体主席,中国金属学会理事长和钢铁行业技术创新战略联盟理事长、科技创新驱动2030“重点新材料研发及应用”重大项目编制专家组组长,先后获得国家科技进步二等奖2项及省部级科技进步一等奖5项,主导多项国家规划及项目方案编制工作。wz2005101101@163.com   
作者简介:  王镇,2013年1月毕业于北京科技大学,获得材料科学与工程专业硕士学位。中国产业基础能力发展战略研究院高级工程师,国家产业基础专家委员会秘书处成员。从事新材料等领域行业分析与战略研究工作,参与国家及地方规划咨询项目30余项。
引用本文:    
王镇, 肖丽俊, 干勇. 新材料引领支撑绿色低碳经济发展[J]. 材料导报, 2024, 38(3): 22060075-7.
WANG Zhen, XIAO Lijun, GAN Yong. Advanced Materials Lead and Support the Development of Green and Low-carbon Economy. Materials Reports, 2024, 38(3): 22060075-7.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.22060075  或          http://www.mater-rep.com/CN/Y2024/V38/I3/22060075
1 National Advanced Material Industry Development Expert Advisory Committee. China new material industry development annual report (2017), Metallurgical Industry Press, China, 2018(in Chinese).
国家新材料产业发展专家咨询委员会. 中国新材料产业发展年度报告(2017), 冶金工业出版社, 2018.
2 Gang Y. Journal of Iron and Steel Research, 2021, 33(10), 997(in Chinese).
干勇. 钢铁研究学报, 2021, 33(10), 997.
3 Wang Z, Xiao L J. Materials Reports, 2021, 35(23), 23020(in Chinese).
王镇, 肖丽俊. 材料导报, 2021, 35(23), 23020.
4 Shangguan F Q, Liu Z D, Yin R Y. China Metallurgy, 2021, 31(9), 15(in Chinese).
上官方钦, 刘正东, 殷瑞钰. 中国冶金, 2021, 31(9), 15.
5 Zhang C X, Wang H F, Zhang S R, et al. Iron and Steel, 2015, 50(10), 1(in Chinese).
张春霞, 王海风, 张寿荣, 等. 钢铁, 2015, 50(10), 1.
6 Wang R H, Huang P F, Wang S H. Journal of Salt and Chemical Industry, 2019, 48(11), 1(in Chinese).
王锐浩, 黄鹏飞, 王生辉. 盐科学与化工, 2019, 48(11), 1.
7 Cui H Y, Yu X Z. Scientific and Technological Innovation, 2018(9), 51(in Chinese).
崔红岩, 喻小珍. 科学技术创新, 2018(9), 51.
8 Feng Z Y, Wang M, Zhao L S, et al. Journal of Chinese Society Rare Earths, 2021, 39(3), 469(in Chinese).
冯宗玉, 王猛, 赵龙胜, 等. 中国稀土学报, 2021, 39(3), 469.
9 Huang X W, Feng Z Y, Zhao L S, et al. In: China Rare Earth Society 2017 Academic Annual Meeting. Beijng, 2017, pp.26(in Chinese).
黄小卫, 冯宗玉, 赵龙胜, 等. 中国稀土学会2017学术年会, 北京, 2017, pp.26.
10 Li S S. Chemical Enterprise Management, 2016(25), 17(in Chinese).
李寿生. 化工管理, 2016(25), 17.
11 He J D, Peng Z L, Wang C, et al. Bulletin of Chinese Academy of Sciences, 2019, 34(10), 1136(in Chinese).
何京东, 彭子龙, 王春, 等. 中国科学院院刊, 2019, 34(10), 1136.
12 Xue M, Lu M X, Zhang X F, et al. Environmental Protection, 2021, 49(Z2), 30(in Chinese).
薛明, 卢明霞, 张晓飞, 等. 环境保护, 2021, 49(Z2), 30.
13 Chen G Q. China National Building Materials, 2022(1), 28(in Chinese).
陈国庆. 中国建材, 2022(1), 28.
14 Zhu B J. Economic Daily, 2022, 01, 21(6).
祝君壁. 经济日报, 2022, 01, 21(6).
15 建材行业节能环保绿色低碳典型企业经验分享(二). 中国建材, 2020(6), 48.
16 强化能效约束作用稳妥有序推动建材行业绿色低碳高质量发展. 中国建材, 2021(12), 33.
17 Liu Z D, Chen Z Z, He X K, et al. Acta Metallurgica Sinica, 2020, 56(4), 539(in Chinese).
刘正东, 陈正宗, 何西扣, 等. 金属学报, 2020, 56(4), 539.
18 Qin Z W. Chinese Journal of Science, 2020, 01, 16(3) (in Chinese).
秦志伟. 中国科学报, 2020, 01, 16(3).
19 Zhao J. Gas Separating, 2013(4), 2.
赵俊. 气体分离, 2013(4), 2.
20 Sun J F, Zhang H, Liang J S, et. al. Materials Reports, 2021, 35(13), 13075(in Chinese).
孙剑锋, 张红, 梁金生, 等. 材料导报, 2021, 35(13), 13075.
21 Lu A H. Acta Petrologica ET Mineralogica, 2015, 34(6), 795(in Chinese) .
鲁安怀.岩石矿物学杂志 , 2015, 34(6), 795.
22 Dong G Y. Study on preparation of zinc silicate composite by iron ore tai-lings and adsorption for dyes and antibiotics in water. Master's Thesis, Hebei University of Technology, China, 2020(in Chinese).
董功越. 铁尾矿制备硅酸锌复合材料及其去除水中染料和抗生素研究. 硕士学位论文, 河北工业大学, 2020.
23 Li D, Xiao J S, Ma L. Advanced Materials Industry, 2019(3), 20(in Chinese).
李丹, 肖劲松. 马琳. 新材料产业, 2019(3), 20.
24 Xin Y, Hou B . Wire & Cable, 2004(1), 3(in Chinese).
信赢, 侯波. 电线电缆, 2004 (1), 3.
25 Sun Y L, Hu Z H, Qin A N, et al. World Science-Technology Research & Development, 2020, 42(4), 455(in Chinese).
孙玉玲, 胡智慧, 秦阿宁, 等. 世界科技研究与展, 2020, 42(4), 455.
26 Hu X N. Research on the intensive development of new material industry in China, Ph.D. Thesis, Jilin University, China, 2019 (in Chinese).
胡续楠. 中国新材料产业集约化发展研究. 博士学位论文, 吉林大学, 2019.
[1] 聂松, 周健, 徐名凤, 李辉. 低碳胶凝材料的研究进展[J]. 材料导报, 2024, 38(2): 22050304-9.
[2] 史志铭. 利用沙漠砂合成陶瓷的研究进展与应用前景[J]. 材料导报, 2023, 37(24): 22040360-11.
[3] 徐鹏, 张轩翰, 明高林, 施诗. 纳米改性水泥基材料功能化研究进展[J]. 材料导报, 2023, 37(16): 21080265-10.
[4] 苏允海, 魏祖勇, 张桂清, 张祥稳. 不同补焊次数下ZG06Cr13Ni4Mo的组织演变规律[J]. 材料导报, 2023, 37(16): 22020127-6.
[5] 肖建庄, 叶涛华, 隋同波, 潘智生. 废弃混凝土再生微粉的基本问题及应用[J]. 材料导报, 2023, 37(10): 22120116-10.
[6] 马帅, 金珊珊. 碳纤维增强复合材料对钢筋混凝土的加固作用[J]. 材料导报, 2022, 36(Z1): 22030217-5.
[7] 彭龙生, 刘春泉, 周浩, 林英华. 电渣重熔新技术的研究现状及发展趋势[J]. 材料导报, 2022, 36(Z1): 21100138-9.
[8] 王旭昊, 侯鑫, 甘珑, 汪愿, 边庆华, 张久鹏. 凝灰岩石粉在复合胶凝材料中的火山灰活性及水化性能评估[J]. 材料导报, 2022, 36(16): 22040394-8.
[9] 冯斯桐, 王林杰, 欧金法, 罗劭娟, 严凯, 吴传德. 钙钛矿量子点与金属有机框架复合材料的研究进展[J]. 材料导报, 2021, 35(z2): 298-305.
[10] 宋少民, 王宇杰, 李统彬. 新型胶凝材料体系的抗裂性能[J]. 材料导报, 2021, 35(Z1): 206-210.
[11] 马力, 赵赫, 昝宇宁, 肖伯律, 王东, 王全兆, 王文广. 耐热铝合金及其复合材料的制备、应用和强化机制[J]. 材料导报, 2021, 35(Z1): 414-420.
[12] 王镇, 肖丽俊. 企业是新材料科技创新的主体[J]. 材料导报, 2021, 35(23): 23020-23024.
[13] 骆吉源, 肖国庆, 丁冬海, 种小川, 任金翠. 二硼化锆粉体合成研究现状与展望[J]. 材料导报, 2021, 35(21): 21159-21168.
[14] 吴国荣, 陈旭辉. 汽车轮毂材料轻量化与造型设计研究[J]. 材料导报, 2021, 35(19): 19181-19185.
[15] 孙剑锋, 张红, 梁金生, 王菲, 段昕辉, 王亚平. 生态环境功能材料领域的研究进展及学科发展展望[J]. 材料导报, 2021, 35(13): 13075-13084.
[1] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
[2] Haoqi HU,Cheng XU,Lijing YANG,Henghua ZHANG,Zhenlun SONG. Recent Advances in the Research of High-strength and High-conductivity CuCrZr Alloy[J]. Materials Reports, 2018, 32(3): 453 -460 .
[3] Yanchun ZHAO,Congyu XU,Xiaopeng YUAN,Jing HE,Shengzhong KOU,Chunyan LI,Zizhou YUAN. Research Status of Plasticity and Toughness of Bulk Metallic Glass[J]. Materials Reports, 2018, 32(3): 467 -472 .
[4] Xinxing ZHOU,Shaopeng WU,Xiao ZHANG,Quantao LIU,Song XU,Shuai WANG. Molecular-scale Design of Asphalt Materials[J]. Materials Reports, 2018, 32(3): 483 -495 .
[5] Yongtao TAN, Lingbin KONG, Long KANG, Fen RAN. Construction of Nano-Au@PANI Yolk-shell Hollow Structure Electrode Material and Its Electrochemical Performance[J]. Materials Reports, 2018, 32(1): 47 -50 .
[6] Ping ZHU,Guanghui DENG,Xudong SHAO. Review on Dispersion Methods of Carbon Nanotubes in Cement-based Composites[J]. Materials Reports, 2018, 32(1): 149 -158 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅠ:Raw Materials and Mix Proportion Design Method[J]. Materials Reports, 2018, 32(1): 159 -166 .
[8] Guiqin HOU,Yunkai LI,Xiaoyan WANG. Research Progress of Zinc Ferrite as Photocatalyst[J]. Materials Reports, 2018, 32(1): 51 -57 .
[9] Jianxiang DING,Zhengming SUN,Peigen ZHANG,Wubian TIAN,Yamei ZHANG. Current Research Status and Outlook of Ag-based Contact Materials[J]. Materials Reports, 2018, 32(1): 58 -66 .
[10] Jing WANG,Hongke LIU,Pingsheng LIU,Li LI. Advances in Hydrogel Nanocomposites with High Mechanical Strength[J]. Materials Reports, 2018, 32(1): 67 -75 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed