Please wait a minute...
材料导报  2022, Vol. 36 Issue (17): 21030063-13    https://doi.org/10.11896/cldb.21030063
  无机非金属及其复合材料 |
集料形态特征对沥青混合料性能影响规律的研究进展
王凤1, 肖月1,*, 崔培德2, 磨炼同1, 方明镜3
1 武汉理工大学硅酸盐建筑材料国家重点实验室,武汉 430070
2 东南大学交通学院,南京 211189
3 武汉理工大学土木工程与建筑学院,武汉 430070
Review on the Characterization of Aggregate Morphology and Its Influence on Asphalt Mixture Properties
WANG Feng1, XIAO Yue1,*, CUI Peide2, MO Liantong1, FANG Mingjing3
1 State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China
2 School of Transportation, Southeast University, Nanjing 211189, China
3 School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
下载:  全 文 ( PDF ) ( 5428KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 集料是公路工程中需求量最大的原材料。宏观形状和微观纹理等形态特征,是工程集料最重要的物理性质之一,直接决定了沥青混合料骨架互锁结构和内摩擦力的传递路径与分布,对沥青混合料性能及其最终的路面服役行为影响显著。集料形态特征的精确表征对提升沥青混合料性能和路面服役状态及延长寿命意义重大。目前,表征集料形态特征的方法种类繁多,但缺乏系统的分类和比较。此外,集料的形态特征对沥青混合料性能的具体影响规律尚缺乏详细、完整的归纳和汇总。本文概述了当前国内外开展集料形态特征研究时采用的主要表征参数(以纵横比、矩形度、Form2D、球形度、针片状和形状因子为主的宏观形状特征,以棱角性、分形维数、微观纹理系数等为主的表面纹理特征)及其对应的测试-计算方法,并归纳了各形态特征参数的物理意义及其测试方法与适用条件等。同时,总结分析了集料宏观形状、细观棱角和微观纹理参数对沥青混合料性能的影响规律,并对目前用虚拟仿真计算集料形态与混合料性能进行了综述,以期为公路工程设计中集料的优选和沥青混合料的性能优化提供理论指导和设计参考。最后,针对未来对长寿命沥青路面及沥青混合料智能设计的高需求,对未来围绕沥青混合料中集料形态特征研究提出了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王凤
肖月
崔培德
磨炼同
方明镜
关键词:  沥青路面  集料形态  棱角性  纹理  路用性能  抗滑性能    
Abstract: Aggregate ranks the biggest amount of needing materials in road engineering. Its morphology, mainly macro shapes and micro-texture, is one of the most important physical properties of aggregates, which directly determines the interlocking of the asphalt mixture skeleton as well as the transmission path and distribution of internal friction. And it has a significant influence on the properties and service behavior of asphalt mixture. The accurate evaluation of the morphological characteristics of aggregates is of great significance to enhance the service performance of asphalt mixture and prolong the service life of asphalt pavement. At present, there are many kinds of methods to characterize aggregate morphologies, while systematic classification and comparison are absent. Meanwhile, the impact of aggregate morphologies on the service performance of asphalt mixture lacks a detailed and complete summary. This paper summarizes the comprehensive testing and analysis methods of aggregate morphologies (macro shapes mainly include aspect ratio, rectangularity, Form2D, sphericity, flat and elongated and shape factor, and micro textures mainly include angularity, fractal dimension and micro-texture coefficient) at home and abroad, and the correponding test-calculation methods. The physical meaning of each morphological characteristic parameter and applicable conditions of its testing method are summarized. Furthermore, the effects of macro-shape, meso-angularity and micro-texture on service performance of asphalt mixture are analyzed. And the aggregate morphologies based on computer science are summarized, in order to provide engineering guidance and design reference for aggregate selection and performance optimization of asphalt mixture. Finally, in the view of the high demand for long-life pavement and smart design of asphalt mixture in the future, further study on the aggregate morphological characteristics in asphalt mixture are prospected.
Key words:  asphalt pavement    aggregate shape    angularity    texture    service performance    skid-resistance
出版日期:  2022-09-10      发布日期:  2022-09-10
ZTFLH:  U414  
  TB332  
基金资助: 国家自然科学基金(U1733121)
通讯作者:  *xiaoy@whut.edu.cn   
作者简介:  王凤,2019年6月在武汉理工大学材料科学与工程学院取得硕士学位。现为武汉理工大学博士研究生。主要研究领域为集料细观形态和路面抗滑机理等相关研究。已发表学术论文8篇。
肖月,研究员,博士研究生导师,绿色建筑材料及制造教育部工程研究中心副主任。博士毕业于代尔夫特理工大学,曾获教育部霍英东青年教师奖。一直从事沥青基道路材料设计等研究工作,在低烟气排放沥青材料、抗滑罩面和固废道材资源化利用等方面取得了系列原创研究成果。近五年主持国家自然科学基金项目3项,发表学术论文57篇。
引用本文:    
王凤, 肖月, 崔培德, 磨炼同, 方明镜. 集料形态特征对沥青混合料性能影响规律的研究进展[J]. 材料导报, 2022, 36(17): 21030063-13.
WANG Feng, XIAO Yue, CUI Peide, MO Liantong, FANG Mingjing. Review on the Characterization of Aggregate Morphology and Its Influence on Asphalt Mixture Properties. Materials Reports, 2022, 36(17): 21030063-13.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.21030063  或          http://www.mater-rep.com/CN/Y2022/V36/I17/21030063
1 Liu G Q, Zhao Y L, Zhou J, et al. Construction and Building Materials, 2017, 148, 599.
2 Chen A Q, Liu G Q, Zhao Y L, et al. Construction and Building Mate-rials, 2018, 167, 177.
3 Tan Y Q, Li G N, Shan L Y, et al. Journal of Traffic and Transportation Engineering, 2020, 20(6), 1 (in Chinese).
谭忆秋, 李冠男, 单丽岩, 等.交通运输工程学报, 2020, 20(6), 1.
4 Bi J F, Zheng N X, Dong S, et al. Materials Reports B:Research Papers, 2019, 33(12), 4098 (in Chinese).
毕洁夫, 郑南翔, 董是, 等.材料导报:研究篇, 2019, 33(12), 4098.
5 Castillo D, Caro S, Darabi M K, et al. Road Materials and Pavement Design, 2018, 19(4), 972.
6 Anderson R M, Christensen D W, Bonaquist R, et al. In: Technical Sessions of the Association-of-Asphalt-Paving-Technologists. Lexington, 2003, pp. 126.
7 Zhang Z Q, Zhao Z L, Zhang W P. Journal of Chang'an University (Na-tural Science Edition), 2005(2), 1 (in Chinese).
张争奇, 赵战利, 张卫平.长安大学学报(自然科学版), 2005 (2), 1.
8 Garcia V M, Barros L, Garibay J, et al. Journal of Materials in Civil Engineering, 2020, 32(5), 04020102.
9 Zhu X W, Li B, Wei D B, et al. Journal of China & Foreign Highway, 2020, 40(3), 43 (in Chinese).
朱旭伟, 李波, 魏定邦, 等.中外公路, 2020, 40(3), 43.
10 Chen J S, Wong S Y, Chen J S. Materials and Structures, 2005, 38(277), 395.
11 Al-Rousan T, Masad E, Tutumluer E, et al. Construction & Building Materials, 2007, 21(5), 978.
12 Wang L S, Shen A Q, Yao J L. Construction and Building Materials, 2020, 262, 120030.
13 Valdes-Vidal G, Calabi-Floody A, Sanchez-Alonso E, et al. Construction and Building Materials, 2019, 224, 124.
14 Pan T Y, Tutumluer E, Carpenter S H. Journal of Transportation Engineering-ASCE, 2006, 132(7), 580.
15 Zhang D, Huang X M, Zhao Y L. Construction and Building Materials, 2012, 34, 330.
16 Liu P F, Hu J, Wang D W, et al. Construction & Building Materials, 2017, 133, 196.
17 Qin X. Research on shape characteristics and distribution characteristics of aggregate based on image analysis. Master's Thesis, Qingdao University of Technology, China, 2016 (in Chinese).
秦雪. 基于图像分析的集料形状特征与分布特征研究. 硕士学位论文, 青岛理工大学, 2016.
18 Xie X G, Lu G Y, Liu P F, et al. Construction and Building Materials, 2017, 139, 1.
19 Wang D W, Chen X H, Oeser M, et al. Wear, 2014, 318(1-2), 1.
20 Zhu H, Nodes J E. Mechanics of Materials, 2000, 32(3), 193.
21 Huang B S, Chen X W, Shu X, et al. International Journal of Pavement Engineering, 2009, 10(1), 19.
22 Chen J K, Gao J F, Wang H N, et al. Road Machinery & Construction Mechanization, 2019, 36(9), 100 (in Chinese).
陈甲康, 高俊锋, 汪海年, 等.筑路机械与施工机械化, 2019, 36(9), 100.
23 Liu Y F, Sun W J, Nair H, et al. Journal of Materials in Civil Enginee-ring, 2016, 28(8), 04016046.
24 Wang H N, Bu Y, Wang Y Z, et al. Advances in Materials Science and Engineering, 2016, 2016, 6264317.
25 Ju H Y, Li W, Tighe S, et al. Journal of Materials in Civil Engineering, 2020, 32(6), 04020140.
26 Mahmoud E, Gates L, Masad E, et al. Journal of Materials in Civil Engineering, 2010, 22(4), 369.
27 Bloom M, Corriveau J, Giordano P, et al. IEEE Transactions on Instrumentation and Measurement, 2010, 59(9), 2365.
28 Su D, Yan W M. Construction and Building Materials, 2018, 161, 547.
29 Liang Z Y, Nie Z H, An A J, et al. Powder Technology, 2019, 353, 156.
30 Gong F Y, Zhou X D, You Z P, et al. Construction and Building Mate-rials, 2018, 189, 338.
31 Liu Y, You Z P. Journal of Engineering Mechanics, 2011, 137(4), 294.
32 Xiao Y J, Ni F J, Kuai H D, et al. Journal of Zhengzhou University (Engineering Science), 2006(4), 44 (in Chinese).
肖源杰, 倪富健, 蒯海东, 等.郑州大学学报(工学版), 2006 (4), 44.
33 Ji L, Li J, Zhang L, et al. Journal of Harbin Institute of Technology, 2019, 51(3), 61 (in Chinese).
纪伦, 李俊, 张磊, 等.哈尔滨工业大学学报, 2019, 51(3), 61.
34 Ji L, Liu H Q, Zhang L, et al. Journal of Harbin Institute of Technology, 2018, 50(9), 40(in Chinese).
纪伦, 刘海权, 张磊, 等.哈尔滨工业大学学报, 2018, 50(9), 40.
35 Xiong Q. Research on digital image technology of coarse aggregate morphology characteristics. Master's Thesis, Chongqing Jiaotong University, China, 2011 (in Chinese).
熊琴. 粗集料形状特征的数字图像分析. 硕士学位论文, 重庆交通大学, 2011.
36 Wang Y Z. The study of the effect of coarse aggregate of microstructure characteristic on the performance of asphalt mixture. Master's Thesis, Chang'an University, China, 2012 (in Chinese).
王彦喆. 粗集料细观结构特征对沥青混合料性能的影响研究. 硕士学位论文, 长安大学, 2012.
37 Su W C. Experimental study on gravel particle shape effect on the performance of asphalt mixture. Master's Thesis, Changsha University of Science & Technology, China, 2013 (in Chinese).
苏文超. 碎石颗粒形状对沥青混合料性能影响的试验研究. 硕士学位论文, 长沙理工大学, 2013.
38 Tao J L. Research on characteristics of mineral aggregate and its effect on high and low temperature viscoelastic performance of asphalt mixture. Ph.D. Thesis, Jilin University, China, 2017 (in Chinese).
陶敬林.矿料性质及其对沥青混合料高低温粘弹性能的影响研究. 博士学位论文, 吉林大学, 2017.
39 Pei J Z, Bi Y Q, Zhang J P, et al. Construction and Building Materials, 2016, 126, 165.
40 Arasan S, Akbulut S, Hasiloglu A S. KSCE Journal of Civil Engineering, 2011, 15(7), 1219.
41 Wang D Q. Research on representation of fine aggregate geometric characteristics parameters and its influence on asphalt mixture performance. Ph.D. Thesis, Harbin Institute of Technology, China, 2013 (in Chinese).
王大庆. 细集料几何特征参数的表征及对沥青混合料性能影响研究. 博士学位论文, 哈尔滨工业大学, 2013.
42 Cui Z, Zhang S R. Journal of Traffic and Transportation Engineering, 2017, 17(5), 39 (in Chinese).
崔喆, 张生瑞.交通运输工程学报, 2017, 17(5), 39.
43 Zhang D D. Geometric characteristics study of aggregates for asphalt mixture. Master's Thesis, Chang'an University, China, 2010 (in Chinese).
张冬冬. 沥青混合料集料几何特性研究. 硕士学位论文, 长安大学, 2010.
44 Liao Y P. The study of aggregate shape and its distribution in HMX based on DIP method. Master's Thesis, University of South China, China, 2015 (in Chinese).
廖一平. 基于数字图像处理的沥青混合料集料形状及分布研究. 硕士学位论文, 南华大学, 2015.
45 Zhang Y. Research on skid resistance mechanism of asphalt pavement based on characteristics of aggregate surface texture. Master's Thesis, Chongqing Jiaotong University, China, 2014 (in Chinese).
张毓. 基于集料表面纹理构造特征的沥青路面抗滑机理研究. 硕士学位论文,重庆交通大学, 2014.
46 Wang H N, Hao P W, Hu S T. Highway, 2008 (10), 180 (in Chinese).
汪海年, 郝培文, 胡世通.公路, 2008 (10), 180.
47 Lin H. Quantitative study of shape characteristics for coarse aggregate based on digital image processing. Master's Thesis, Hunan University, China, 2007 (in Chinese).
林辉. 基于数字图像处理技术的粗集料形状特征量化研究. 硕士学位论文, 湖南大学, 2007.
48 Wang L B, Wang X. Journal of Materials in Civil Engineering, 2005, 17, 498.
49 Zhang L. Investigation about Impacts of coarse aggregate gradation and morphology on asphalt mixture structure and performance. Master's Thesis, Harbin Institute of Technology, China, 2017 (in Chinese).
张磊. 粗集料级配及形貌对沥青混合料结构和性能的影响研究. 硕士学位论文, 哈尔滨工业大学, 2017.
50 Bessa I S, Branco V T F C, Soares J B, et al. Journal of Materials in Civil Engineering, 2015, 27(7), 04014212.
51 Singh D, Zaman M, Commuri S. Road Materials and Pavement Design, 2012, 13(2), 327.
52 Cui P D, Xiao Y, Yan B X, et al. Construction and Building Materials, 2018, 186, 303.
53 Yang X, You Z P, Jin C, et al. International Journal of Geomechanics, 2018, 18(10), 06018024.
54 He X, Yin J, Yang J W, et al. Materiali in Tehnologije, 2019, 53, 171.
55 Masad E, Button J W. Computer-Aided Civil and Infrastructure Enginee-ring, 2000, 15(4), 273.
56 Chen J S, Hsieh W C, Liao M C. International Journal of Pavement Research & Technology, 2013, 6(5), 595.
57 Gong X B. Mechanical behavior and united models of asphalt pavement materials within multi scales. Ph.D. Thesis, Harbin Institute of Technology, China, 2017 (in Chinese).
龚湘兵. 沥青路面材料多尺度域力学行为及统一模型. 博士学位论文, 哈尔滨工业大学, 2017.
58 Zhao Z J. Study on the evaluation method of coarse aggregate angularity and its influence on the road performance of asphalt mixture. Master's Thesis, Chang'an University, China, 2018 (in Chinese).
赵振军. 粗集料棱角性的评价方法及对混合料性能影响研究. 硕士学位论文, 长安大学, 2018.
59 Kuang D L, Wang X T, Jiao Y, et al. Construction and Building Mate-rials, 2019, 200, 681.
60 Masad E, Olcott D, White T, et al. In: 80th Annual Meeting of the Transportation-Research-Board. Washington, 2001, pp. 148.
61 Al-Rousan T, Masad E, Myers L, et al. Geology and Properties of Earth Mate-rials. 2005, 1913, 11.
62 Liu Y F, Huang Y C, Sun W J, et al. Construction and Building Mate-rials, 2017, 152, 48.
63 Wang H N, Wang C H, Bu Y, et al. Construction and Building Mate-rials, 2020, 242, 118150.
64 Yang X, Chen S Y, You Z P. Journal of Materials in Civil Engineering, 2017, 29(7), 04017031.
65 Wang W N, Xu Q J, Zhou S X, et al. Materials Reports A:Review Papers, 2019(7), 2197 (in Chinese).
王威娜, 徐青杰, 周圣雄, 等.材料导报:综述篇, 2019(7), 2197.
66 Yu J M, Zhou W L. Materials Reports, 2021(2), 2052 (in Chinese).
虞将苗, 周文理.材料导报, 2021(2), 2052.
67 Liu T. Study on the microstructure and skid resistance of asphalt pavement's coarse aggregate. Master's Thesis, South China University of Technology, China, 2013 (in Chinese).
刘涛. 沥青路面粗集料的微观构造及抗滑性能研究. 硕士学位论文, 华南理工大学, 2013.
68 Zhang X N, Sun Y Y. Computer Engineering, 2010(23), 277 (in Chinese).
张肖宁, 孙杨勇.计算机工程, 2010(23), 277.
69 Zhang X N, Sun Y Y. Highway, 2010 (12), 124 (in Chinese).
张肖宁, 孙杨勇.公路, 2010 (12), 124.
70 Wang L. Investigation of the Interface structure and adhesion mechanism between asphalt and aggregate. Master's Thesis, Chang'an University, China, 2014 (in Chinese).
王璐. 沥青—集料界面相结构和粘附机理研究. 硕士学位论文, 长安大学, 2014.
71 Xiong R, Yang F, Guan B W, et al. Materials Reports B:Research Papers, 2019, 33(10), 3436 (in Chinese).
熊锐, 杨发, 关博文, 等. 材料导报:研究篇, 2019, 33(10), 3436.
72 Zhang X N, Sun Y Y. Journal of Highway and Transportation Research and Development, 2011, 28(1), 19 (in Chinese).
张肖宁, 孙杨勇.公路交通科技, 2011, 28(1), 19.
73 Dong W J. Research on the effect of aggregate morphology on affnity between bitumen and aggregate. Master's Thesis, Yangzhou University, China, 2013 (in Chinese).
董文姣. 集料形貌对沥青—集料黏附性影响研究. 硕士学位论文, 扬州大学, 2013.
74 Li D M. Journal of Fujian University of Technology, 2009(3), 241 (in Chinese).
李冬梅.福建工程学院学报, 2009(3), 241.
75 Wang C F. Study of image-based aggregate morphological characteristics and mixture gradation analysis techniques. Master's Thesis, Chang'an University, China, 2011 (in Chinese).
王超凡. 集料形态特征与混合料级配的图像法分析技术研究. 硕士学位论文, 长安大学, 2011.
76 Kim H, Haas C T, Rauch A F, et al. Journal of Computing in Civil Engineering, 2002, 16(3), 175.
77 Lanaro F, Tolppanen P. Engineering Geology, 2002, 65(1), 17.
78 Cui P D, Wu S P, Xiao Y, et al. Construction and Building Materials, 2019, 228, 116658.
79 Liu Y, Gong F Y, You Z P, et al. Journal of Materials in Civil Enginee-ring, 2018, 30(1), 04017248.
80 Moaveni M, Wang S N, Hart J M, et al. Transportation Research Record, 2013, 2335(1), 50.
81 Rao C, Tutumluer E, Stefanski J A. Journal of Testing and Evaluation, 2001, 29(5), 461.
82 Li Z, Liu T, Liu C L. Journal of South China University of Technology (Natural Science Edition), 2013(2), 88 (in Chinese).
李智, 刘涛, 刘春雷. 华南理工大学学报(自然科学版), 2013(2), 88.
83 Lin C, Wang T J. Construction and Building Materials, 2018, 168, 41.
84 Liu L. Numerical relation study on three-dimensional texture structure and skid resistance of road surface. Master's Thesis, Xinjiang University, China, 2019 (in Chinese).
刘林. 沥青路表三维纹理构造与抗滑性能数值关系研究. 硕士学位论文, 新疆大学, 2019.
85 Wang F, Cui P D, Zhang X S, et al. Materials, 2020, 13(12), 2679.
86 Xiao Y, Wang F, Cui P D, et al. Materials, 2018, 11(6), 920.
87 Zhu X Y, Pang Y F, Yang J, et al. China Journal of Highway and Transport, 2020, 33(10), 159 (in Chinese).
朱兴一, 庞亚凤, 杨健, 等.中国公路学报, 2020, 33(10), 159.
88 Guo Y L, Markine V, Qiang W L, et al. Construction and Building Materials, 2019, 212, 210.
89 Liu H Y, Sun Z Y, Li W, et al. IEEE Access, 2020, 8, 143241.
90 Zhang D, Huang X M, Zhao Y L. Journal of Testing and Evaluation, 2015, 43(3), 554.
91 Wei L, Ju H Y, Tighe S L, et al. Road Materials and Pavement Design, 2019, 20(1), 132.
92 Limodin N, Salvo L, Suery M, et al. Scripta Materialia, 2009, 60, 325.
93 Hoehner D, Wirtz S, Scherer V. Powder Technology, 2014, 253, 256.
94 Chen S Y, Yang X, You Z P, et al. Construction and Building Materials, 2016, 120, 442.
95 Peng Y, Wan L, Sun L J. International Journal of Pavement Engineering, 2019, 20(6), 724.
96 Liu Y, Zhou X D, You Z P, et al. Construction and Building Materials, 2017, 143, 169.
97 Wang H N, Wang C H, You Z P, et al. International Journal of Pavement Engineering, 2018, 19(3), 307.
98 Li J, Zhang J H, Qian G P, et al. Journal of Materials in Civil Enginee-ring, 2019, 31(3), 04019004.
99 Zheng J L, Lyu S T, Liu C C. Chinese Science Bulletin, 2020, 65(30), 3219 (in Chinese).
郑健龙, 吕松涛, 刘超超.科学通报, 2020, 65(30), 3219.
100 Wang S J, Ma T, Zhang W G, et al.Chinese Science Bulletin, 2020, 65(30), 3228 (in Chinese).
汪双杰, 马涛, 张伟光, 等.科学通报, 2020, 65(30), 3228.
101 Ge H T, Sha A M, Han Z Q, et al.Construction and Building Materials, 2018, 188, 58.
102 Wang D H, Ding X H, Ma T, et al.Applied Sciences-Basel, 2018, 8, 738.
103 Zhu H J, Fang H Y, Cai Y Y, et al.Particuology, 2020, 50, 181.
104 Xing C, Tan Y Q, Zhang K, et al.China Journal of Highway and Transport, 2020, 33(10), 76 (in Chinese).
邢超, 谭忆秋, 张凯, 等.中国公路学报, 2020, 33(10), 76.
[1] 丁滔, 金珊珊, 索智, 季节, 张扬. 嵌锁式沥青稳定碎石配合比设计及性能研究[J]. 材料导报, 2022, 36(Z1): 22030296-5.
[2] 屠艳平, 陈国夫, 程子扬, 程书凯. 纳米SiO2对再生骨料沥青混凝土性能的影响[J]. 材料导报, 2022, 36(Z1): 22030139-5.
[3] 周雯怡, 易军艳, 陈卓, 冯德成. 泡沫沥青冷再生混合料界面黏附性提升原理与路用性能验证[J]. 材料导报, 2022, 36(16): 21110120-9.
[4] 朱月风, 赵向臻, 司春棣, 闫涛, 李彦伟. 自修复型微胶囊在沥青路面中的受力分析及破裂机制[J]. 材料导报, 2022, 36(10): 20120095-6.
[5] 凌天清, 崔立龙, 张意, 田波, 李定珠. 考虑沥青层表面细观构造的探地雷达空隙率检测研究[J]. 材料导报, 2021, 35(24): 24081-24087.
[6] 张争奇, 强亚奎, 张世豪, 王东, 赵富强. 沥青路面超疏水抗凝冰涂层设计及性能[J]. 材料导报, 2021, 35(10): 10073-10079.
[7] 赵毅, 秦旻, 文凯琪, 梁乃兴, 王亚茹. 沥青路面超疏水抗凝冰材料研究进展[J]. 材料导报, 2021, 35(1): 1141-1153.
[8] 柴金玲, 栗威. 基于GTM的沥青混合料配合比设计方法试验研究[J]. 材料导报, 2020, 34(Z2): 283-287.
[9] 丛卓红, 陈恒达, 郑南翔, 周晚君. 水泥混凝土路面纹理的研究进展[J]. 材料导报, 2020, 34(9): 9110-9116.
[10] 杨海鹏, 石玗, 林巧力, 慈文娟, 张刚. 铜表面微结构化对惰性润湿和反应润湿的影响[J]. 材料导报, 2020, 34(16): 16109-16113.
[11] 王兆仑, 刘朝晖, 高建华. 高粘度抗滑封装薄层沥青路面长效协同作用机理分析[J]. 材料导报, 2019, 33(Z2): 242-246.
[12] 陈玉静, 沙爱民, 胡魁, 刘状壮, 曹世豪, 张华. 青藏地区路用遮热涂层的制备及性能[J]. 材料导报, 2019, 33(14): 2319-2325.
[13] 王选仓, 孙耀宁, 王文强, 赵伦, 周爱国. 粘层材料剪切疲劳特性及层间设计方法研究[J]. 材料导报, 2018, 32(16): 2750-2756.
[14] 王泳丹, 刘子铭, 郝培文. 废旧玻璃在沥青混合料中的应用研究进展[J]. 材料导报, 2018, 32(15): 2626-2634.
[15] 胡力群, 贠迪, 杨周晓政. 开级配沥青磨耗层宏观构造特征及其降雨条件下抗滑性能研究*[J]. 《材料导报》期刊社, 2017, 31(8): 113-117.
[1] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4] Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5] Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6] Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7] Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8] Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9] Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10] Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed