Effect of Work Hardening on Mechanical Properties of Stress Corrosion Crack Tip of 304 Stainless Steel
ZHANG Jianlong1,2, XUE He1, CUI Yinghao1, CHEN Hao1
1 College of Mechanical Engineering, Xi’an University of Science and Technology, Xi’an 710054 2 Xi’an Special Equipment Inspection Institute, Xi’an 710065
Abstract: Stress corrosion cracking (SCC) is one of the main failure mode of austenitic steel in pressure piping, and cold working deformation has a certain influence on the material mechanical properties and the crack propagation. Firstly, the constitutive parameters of 304 stainless steel under different cold working hardening conditions were obtained by fatigue stretching machine, and then finite element simulation method was adopted to establish the SCC crack tip analysis model and sub-model in this paper. The SCC crack tip stress strain, J-integration and crack growth rate of 304 austenitic stainless steel were studied under different work hardening. Results show that with the increasing of the material work har-dening degree, the Mises stress and J integral at the SCC tip increase gradually, but the crack tip strain (PEEQ) gradually decreases. To some extent, the work hardening promotes and accelerates the stress corrosion cracking of 304 stainless steel.
Xue H, Sato Y, Shoji T.Journal of Pressure Vessel Technology,2009,131(1),61.2 Ma Cheng, Peng Qunjia, Han Enhou, et al.Journal of Chinese Society for Corrosion and Protection, 2014, 34(1),37(in Chinese).马成, 彭群家, 韩恩厚, 等. 中国腐蚀与防护学报, 2014, 34(1),37.3 Hou J, Peng Q, Testuo S, et al.Acta Metallurgica Sinica, 2010, 46(10),1258(in Chinese).侯娟, 彭群家, 庄子哲雄, 等. 金属学报, 2010, 46(10),1258.4 Zhou Z X,Jin S S,Liu C L,et al.Physical Testing and Chemical Analysis(Part A:Physical Testing),2015, 51(10),721.邹章雄, 金少申, 刘昌禄,等. 理化检验(物理分册), 2015, 51(10),721.5 Christopher J, Choudhary B K. International Journal of Pressure Vessels & Piping, 2016, 146(10),151.6 Zhao Lingyan, Cui Yinghao, Yang Fuqiang. In:IOP Conference Series Material Science and Engineering, 2018(in Chinese).赵凌燕, 崔英浩, 杨富强. 英国物理学会会议系列: 材料科学与工程, 2018.7 Han Fei.Study on cold work hardening and annealing softening of 304 austenitic stainless steel.Master’s Thesis,Central South University, 2004 (in Chinese).韩飞. 304奥氏体不锈钢冷加工硬化及退火软化的研究. 硕士学位论文,中南大学, 2004.8 Hou Xiaozhen, Zheng Wenjie, Song Zhigang.Journal of Iron and Steel Research, 2013, 25(7),53 (in Chinese).侯小振, 郑文杰, 宋志刚, 等. 钢铁研究学报, 2013, 25(7),53.9 Yang Fuqiang, Xue He, Zhao Lingyan, et al. Rare Metal Materials and Engineering, 2016, 45(7),1641(in Chinese).杨富强, 薛河, 赵凌燕,等.稀有金属材料与工程, 2016, 45(7),1641.10 Yang Hongliang, Xue He, Ni Chenqiang. Journal of Xi’an University of Science and Technology, 2018(3),484(in Chinese).杨宏亮, 薛河, 倪陈强. 西安科技大学学报, 2018(3),484.11 Lu Z, Shoji T, Takeda Y, et al. Corrosion Science, 2008, 50(2),561.12 Karlsen W, Dyck S V. Journal of Nuclear Materials, 2010, 406(1),127.13 Arioka K, Yamada T, Terachi T, et al. Corrosion, 2007, 63(12),1114.14 Raquet O, Herms E, Vaillant F, et al. Advances in Materials Science, 2007, 7(1), 33.15 Byun T S, Hashimoto N, Farrell K.Acta Materialia, 2004, 52(13),3889.16 Ramberg W, Osgood W R. Description of stress-strain curves by three parameters. NASA Scientific and Technical Information Facility, Washington D.C.,1943.17 Ma Yinghua. Research on stress and strain field and plastic zone at tip of small crack.Master’s Thesis, Xi’an University of Science and Technology, 2014(in Chinese).马颖化. 小裂纹裂尖应力应变场分析及塑性区修正. 硕士学位论文,西安科技大学, 2014.18 Ford P. International Journal of Pressure Vessels and Piping, 1989, 40(55),343.19 He X, Shoji T. Journal of Pressure Vessel Technology, 2007, 129(3),460.20 Peng Q J, Kwon J, Shoji T.Journal of Nuclear Materials, 2004, 324(1), 52.