Please wait a minute...
材料导报  2020, Vol. 34 Issue (Z1): 466-468    
  金属与金属基复合材料 |
风电机组叶片翼型设计与气动性能分析
于洪明1,2, 孙鸿1
1 运城学院应用化学系,运城 044000;
2 水发集团有限公司,济南 250100
Airfoil Design and Aerodynamic Performance Analysis of Wind Turbine Blade
YU Hongming1,2, SUN Hong1
1 Department of Applied Chemistry, Yucheng University, Yucheng 044000, China;
2 Shuifa Group Co., Ltd, Jinan 250100, China
下载:  全 文 ( PDF ) ( 2568KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本研究介绍了风力发电机组叶片设计动量理论、叶素理论及其Glauert修正方法,并以某风场2.0 MW-D111风电机组为研究对象,通过Bladed软件建模计算了该叶片的气动设计和整机功率曲线等性能,并与实测数据进行了对比。结果表明,理论设计与实测数据结果比较符合,说明叶片翼型参数和设计方法是可行的。本研究对风电叶片的设计有一定的参考价值和实际意义。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
于洪明
孙鸿
关键词:  风电机组  叶片设计  分析验证    
Abstract: Wnd turbine blade design methods of momentum theory, bladed element theory and the amendatory Glauert theory were described in this paper. The blade models of turbine were founded in the software of bladed, the aerodynamics performance of airfoil and the wind turbine power curves were obtained by the 2.0 MW-D111 wind turbine. The results show that the original design is accord with the calculation results, indicates that the blade airfoil parameters and design method are feasible, which has certain reference value to the design of wind turbine blade.
Key words:  wind turbine    blade design    analytical validation
                    发布日期:  2020-07-01
ZTFLH:  TM614  
作者简介:  于洪明,教授级高级工程师,济南市能源领域技术专家,泉城领军人才创新团队核心成员。2008年3月至2011年9月,在哈尔滨工业大学获得材料学专业工学博士学位。发表SCI论文15篇、中文核心期刊6篇;申请国家发明专利17项,其中授权10项。研究工作主要围绕轨道交通和新能源新材料的应用,负责完成省市及企业重大科研项目10余项。
引用本文:    
于洪明, 孙鸿. 风电机组叶片翼型设计与气动性能分析[J]. 材料导报, 2020, 34(Z1): 466-468.
YU Hongming, SUN Hong. Airfoil Design and Aerodynamic Performance Analysis of Wind Turbine Blade. Materials Reports, 2020, 34(Z1): 466-468.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2020/V34/IZ1/466
1 Kong C, Kim J. A study on structural and aerodynamic design of compo-site blade for large scale HAWT system. Final Report, Hankuk Fiber Ltd.,2000.
2 李成良.风机叶片结构分析与优化设计.硕士学位论文,武汉理工大学,2008.
3 杨科,徐建中,王会社,等.流体机械学术会议.绍兴,2007,pp.150.
4 黄继雄.风力机专用新翼型及其气动特性研究.硕士学位论文,汕头大学,2007.
5 叶枝全,黄继雄,陈严,等.太阳能学报,2002,23(2),211.
6 尹耀安.大型风力机叶片设计与CFD分析.硕士学位论文,华中科技大学,2008.
7 Burton T, Sharpe D, Jenkins N, et al. Wind energy handbook, John Wiley & Sons, Ltd., Chichester,2001.
8 Wilson D E, Lissaman P B, Walker S N. Aero-dynamic performance of wind turbines. Ph.D. Thesis, Oregon State University, USA,1976.
9 Johnson G L. Wind energy system, K.S. Press, USA,2001.
No related articles found!
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[3] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[4] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[5] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[6] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[7] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[8] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[9] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[10] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed