Research Progress and Development Bottleneck of the Smart Imprinted Polymer
ZHANG Xiaoyan1,2, SUN Yuan3, LI Hui1,2, CHEN Zhenbin1,2
1 College of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 2 State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China 3 Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110000, China
Abstract: Some intrinsic advantages, such as structural predetermination, long-term stability, wide applicability, specific recognition, added to the superiority of cost and preparation technology, make imprinted polymers (IPs) displaying potential application prospect in separation science, solid phase extraction, chromatographic separation, drug controlled release, chemical sensing, environmental detection, electrochemistry, membrane separation and many other fields, which, in fact, provide a foundation material basis and technical support for the accurate separation of templates. Nowadays, with the concept of sustainable development and circular economy accepted increasingly. IPs will be focused more as a research hotspot in the field of high performance functional materials inevitably. However, IPs prepared by the traditional method is a highly cross-linked polymer, and the high cross-linking degree endowing IPs advantages of stable structure and strong recognition. However, owing to the simple and mechanical molecular recognition mechanism resulted from high cross-linking degree, IPs prepared by traditional method lacked the necessary "flexibility" and sufficient sensitivity to external stimulation conditions, which resulted in the difficulty to balance the desorption rate, selectivity and reusability during the separation and purification process, and further limited them application in practical industrial separation. In recent years, researchers' interest has gradually shifted to smart imprinted polymers that can improve the “flexibility” of traditional IPs. A new type of functional material, namely smart imprinted polymers (S-IPs), was prepared by combining smart polymers (SPs) with imprinted polymers (IPs). It not only has the specific selectivity of common imprinted polymers, but also has the characteristics of responsiveness to external stimuli and reversibility of deformation, which makes them more excellent in adsorption and desorption. Research on S-IPs had achieved series of exciting results. Studies had successfully prepared temperature-sensitive IPs (T-IPs), magnetically responsive IPs (M-IPs), pH-sensitive IPs (pH-IPs), photoresponsive IPs (P-IPs) and dual-sensitive IPs (pH-M IPs, pH-T IPs, TM IPs, PM IPs, etc.) and multiple-sensitivity S-IPs, and all above had presented strong prospects in areas such as drug delivery, biotechnology, separation science and sensor etc. This paper mainly reviews the research progress of S-IPs in intelligent mechanism and preparation method. Finally, key bottlenecks that hold back the development of S-IPs are summarizes, and the potential development prospect is concerned.
张小艳, 孙元, 李慧, 陈振斌. 智能印迹聚合物研究进展及发展瓶颈[J]. 材料导报, 2020, 34(15): 15163-15173.
ZHANG Xiaoyan, SUN Yuan, LI Hui, CHEN Zhenbin. Research Progress and Development Bottleneck of the Smart Imprinted Polymer. Materials Reports, 2020, 34(15): 15163-15173.
Barahona F, Albero B, Tadeo J L, et al.Journal of Chromatography A, 2019, 1587, 42.2 Wagner S, Bell J, Biyikal M, et al.Biosensors and Bioelectronics, 2018, 99, 244.3 Lins S S, das Virgens C F, dos Santos W N L, et al.Microchemical Journal, 2019,150, 104075.4 Adams F, Pahl P, Rieger B.Chemistry-A European Journal, 2018, 24(3), 509.5 Kowalski P S, Capasso Palmiero U, Huang Y, et al. Advanced Materials, 2018, 30(34), 1801151.6 Matyjaszewski K.Advanced Materials, 2018, 30(23), 1706441.7 Moad G.Journal of Polymer Science Part A: Polymer Chemistry, 2019, 57(3), 216.8 Xie S, Tang H D. Polymer Bulletin, 2017(7), 7(in Chinese).谢珊, 唐华东. 高分子通报, 2017(7), 7.9 Pauling L.Journal of the American Chemical Society, 1940, 62(10), 2643.10 Dickey F H.The Journal of Physical Chemistry, 1955, 59(8), 695.11 Vlatakis G, Andersson L I, Müller R, et al. Nature, 1993, 361(6413), 645.12 Chen L, Wang X, Lu W, et al.Chemical Society Reviews, 2016, 45(8), 2137.13 Rao H, Chen M, Ge H, et al.Biosensors and Bioelectronics, 2017, 87, 1029.14 Dong Z, Zeng J, Zhou H, et al.Journal of Chemical Technology & Biotechnology, 2019, 94(3), 942.15 Zou S, Li G, Rees T W, et al.Chemistry-A European Journal, 2018, 24(3), 690.16 Li D, He Q, He Y, et al.Biosensors and Bioelectronics, 2017, 94, 328.17 Shi Y, Ma C, Peng L, et al.Advanced Functional Materials, 2015, 25(8), 1219.18 Haq M A, Su Y, Wang D.Materials Science and Engineering: C, 2017, 70, 842.19 Zhao T, Guan X, Tang W, et al.Analytica Chimica Acta, 2015, 853, 668.20 Yang X, Xia Y.Journal of Separation Science, 2016, 39(2), 419.21 Xiong H, Wu X, Lu W, et al. Talanta, 2018, 176, 187.22 Zheng D, Pei S, Geng S, et al.Journal of Nanoscience and Nanotechnology, 2019, 19(9), 5858.23 Du Y, Ma W, Liu P, et al.Journal of Hazardous Materials, 2016, 308, 58.24 Yao Y, Lu F, Zhu Y, et al.Journal of Hazardous Materials, 2015, 297, 224.25 Tan C, Lee J, Jung S G, et al.Nature Communications, 2018, 9(1), 1554.26 Jiang B, Han C, Li B, et al.ACS Nano, 2016, 10(2), 2728.27 Manzoli M, Calcio Gaudino E, Cravotto G, et al.ACS Sustainable Chemistry & Engineering, 2019, 7(6), 5963.28 Fu X, Liang L, Li X Q, et al. Acta Scientiae Circumstantiae, 2018, 38(4), 1606 (in Chinese).付欣, 梁莉, 李筱琴, 等. 环境科学学报, 2018, 38(4), 1606.29 Wei J, Shuai X, Wang R, et al.Biomaterials, 2017, 145, 138.30 Gao R, Cui X, Hao Y,et al. Food Chemistry, 2016, 194, 1040.31 Zhu K C, Zha X H, Jia H Z, et al. Technology of Water Treatment, 2017, 43(7), 65(in Chinese).祝可成, 査向浩, 贾汉忠, 等. 水处理技术, 2017, 43(7), 65.32 Li Y, Li X, Chu J, et al.Environmental Pollution, 2010, 158(6), 2317.33 Huang W W, Zhao Q Y, Yang X, et al. Journal of Functional Materials, 2019, 50(1), 1018(in Chinese).黄微薇, 赵倩玉, 杨鑫, 等. 功能材料, 2019,50(1),1018.34 Khoddami N, Shemirani F.Talanta, 2016, 146, 244.35 Zhang L M, Wei X P, Wei Y X, et al.Chinese Journal of Analytical Chemistry, 2014, 42(11), 1580(in Chinese).张连明, 魏小平, 韦衍溪, 等. 分析化学, 2014, 42(11), 1580.36 Li Y, Kang J J, Zhao X R, et al.Chemical Journal of Chinese Universities, 2019, 40(3), 448 (in Chinese). 李颖, 康君君, 赵雪茹, 等. 高等学校化学学报, 2019, 40(3), 448.37 Fan J P, Liao D D, Xie Y L, et al.Journal of Applied Polymer Science, 2017, 134(7),44465.38 Xiao R, Zhang X, Zhang X, et al.Talanta, 2017, 166, 262.39 Dong S L, Wang S N, Wang X L, et al. Chinese Journal of Luminescence, 2019, 40(4), 453(in Chinese).董淑玲, 王胜男, 王秀玲, 等. 发光学报, 2019, 40(4), 453.40 Anirudhan T S, Christa J, Deepa J R. Food Chemistry, 2017, 227, 85.41 Miao S S, Wu M S, Zuo H G, et al.Journal of Agricultural and Food Chemistry, 2015, 63(14), 3634.42 Li Y, Ding M J, Wang S, et al.ACS Applied Materials & Interfaces, 2011, 3(9), 3308.43 Xie X, Chen L, Pan X, et al.Journal of Chromatography A, 2015, 1405, 32.44 Tang Y, Gao J, Liu X, et al.Food Chemistry, 2016, 201, 72.45 Jia X, Xu M, Wang Y, et al.Analyst, 2013, 138(2), 651.46 Uzuriaga-Sánchez R J, Khan S, Wong A, et al.Food Chemistry, 2016, 190, 460.47 Yang C, Yu D G, Pan D, et al. Acta Biomaterialia, 2016, 35, 77.48 Yoshizaki Y, Yuba E, Sakaguchi N, et al.Biomaterials, 2017, 141, 272.49 Miyazaki M, Yuba E, Hayashi H, et al.Bioconjugate Chemistry, 2017, 29(1), 44.50 Alam A, Meng Q, Shi G, et al.Composites Science and Technology, 2016, 127, 119.51 Liu B, Palmfeldt J, Lin L, et al.Cell Research, 2018, 28(10), 996.52 Lee S H, McIntyre D, Honess D, et al.British Journal of Cancer, 2018, 119(5), 622.53 Sahiner N, Sagbas S, Sahiner M, et al.Materials Science and Enginee-ring: C, 2017, 70, 317.54 Chen Z, Xu L, Liang Y, et al.Advanced Materials, 2010, 22(13),1488.55 Mao C, Xie X, Liu X, et al.Materials Science and Engineering: C, 2017, 77, 84.56 Mohajeri S A, Malaekeh-Nikouei B, Sadegh H.Drug Development and Industrial Pharmacy, 2012, 38(5), 616.57 Wu Z, Ji C, Zhao X, et al. Journal of the American Chemical Society, 2019, 141 (18), 7385.58 Duman O, Tunç S, Bozoɡˇlan B K, et al.Journal of Alloys and Compounds, 2016, 687, 370.59 Wei Y, Tang Q, Gong C, et al.Analytica Chimica Acta, 2015, 900, 10.60 Samanta D, Galaktionova D, Gemen J, et al. Nature Communications, 2018, 9(1), 641.61 Yuan J, Yuan Y, Tian X, et al.The Journal of Physical Chemistry C, 2016, 120(27), 14840.62 Rosales A M, Mabry K M, Nehls E M, et al.Biomacromolecules, 2015, 16(3), 798.63 Dong L, Feng Y,Wang L, et al. Chemical Society Reviews, 2018, 47(19), 7339.64 Konrad D B, Frank J A, Trauner D.Chemistry-A European Journal, 2016, 22(13), 4364.65 Taniguchi T, Fujisawa J, Shiro M, et al.Chemistry-A European Journal, 2016, 22(23),7950.66 Gong C B, Lam M H W,Yu H X. Advanced Functional Materials, 2006, 16(13), 1759. 67 Fang L, Chen S, Zhang Y, et al.Journal of Materials Chemistry, 2011, 21(7), 2320.68 Tang Q, Li Z, Wei Y, et al.Materials Science and Engineering: C, 2016, 66, 33.69 Xie J, Zhong G, Cai C, et al.Talanta, 2017, 169, 98.70 Dong X, Ma Y, Hou C, et al.Polymer International, 2019, 68(5), 955.71 Li L, Chen L, Zhang H, et al.Materials Science and Engineering: C, 2016, 61, 158.72 Xu S, Li J, Song X, et al. Analytical Methods, 2013, 5(1), 124.73 Duan C, Chen Z, Liu X, et al. Journal of Materials Research, 2019, 148, 1.