Please wait a minute...
材料导报  2017, Vol. 31 Issue (1): 64-71    https://doi.org/10.11896/j.issn.1005-023X.2017.01.008
  材料综述 |
功能型聚丙烯酸酯/无机纳米复合皮革涂饰剂的研究进展
王 彤,鲍 艳
陕西科技大学轻工科学与工程学院,西安 710021
Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing
WANG Tong, BAO Yan
College of Bioresources Chemistry and Materials Engineering, Shaanxi University of Science & Technology, Xi’an 710021
下载:  全 文 ( PDF ) ( 1727KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 随着现代技术的飞速发展以及高新技术向皮革产业的渗透,传统的聚丙烯酸酯涂饰剂不足以满足功能化的需求。而聚丙烯酸酯/无机纳米复合皮革涂饰剂具有卫生、耐黄变、抗菌、防水、抗紫外等一系列优异性能,成为当前的研究热点。基于当今产业背景下的发展需求,综述了聚丙烯酸酯/无机纳米复合皮革涂饰剂的制备方法和性能特点,并对其发展前景进行了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王 彤
鲍 艳
关键词:  聚丙烯酸酯  纳米材料  制备方法  应用性能    
Abstract: With the rapid development of modern technology and the infiltration of new technology to leather industry, traditional polyacrylate coating agent can not fully meet the functional needs due to its disadvantages. Polyacrylate/inorganic nanocompo-site leather finishing agent has a series of preeminent properties, such as hygienic properties, yellowing resistance, antimicrobial behavior, water resistance, self cleaning, UV protection properties and so on, which is the research hotspot in the current fashion. Based on the development needs of the industry background, the preparation methods and application properties of polyacrylate/inorganic nanocomposites are reviewed. Meanwhile, the development of polyacrylate/inorganic nanocomposites is prospected.
Key words:  polyacrylate    nanomaterials    preparation method    application performance
               出版日期:  2017-01-10      发布日期:  2018-05-02
ZTFLH:  TB34  
基金资助: 新世纪优秀人才支持计划(NCET-13-0885);国家自然科学基金(21376145);陕西科技大学科研创新团队项目(TD12-03)
作者简介:  王彤:女,1992年生,硕士,研究方向为有机/无机复合材料 E-mail:tongtong921026@gmail.com 鲍艳:通讯作者,女,1981年生,博士,教授,博士研究生导师,研究方向为有机/无机复合材料 E-mail:baoyan0611@126.com
引用本文:    
王 彤, 鲍 艳. 功能型聚丙烯酸酯/无机纳米复合皮革涂饰剂的研究进展[J]. 材料导报, 2017, 31(1): 64-71.
WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing. Materials Reports, 2017, 31(1): 64-71.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2017.01.008  或          http://www.mater-rep.com/CN/Y2017/V31/I1/64
1 Bao Y, Shi C H, Ma J Z. Fabrication of hollow silica spheres and their effect on water vapor permeability of waterborne polyurethane film [J].J Chin Ceram Soc,2015,43(1):35(in Chinese).
鲍艳,时春华,马建中.中空SiO2微球的制备及其对水性聚氨酯涂膜透水汽性能的影响[J]. 硅酸盐学报,2015,43(1):35.
2 Lu Juan. Structure and properties of superhydrophobic leather fini-shing agent based on particle design[D]. Xi’an: Shaanxi University of Science and Technology,2013(in Chinese).
鲁娟.基于“粒子设计”的超疏水型皮革涂饰材料结构及性能研究[D].西安:陕西科技大学,2013.
3 Li Yanjie. Preparation and studies on modification of high wear-resistance nanoSiO2/polyacrylate composite coating[D]. Xiamen: Xiamen University,2008(in Chinese).
李燕杰.高耐磨性纳米SiO2/聚丙烯酸酯复合涂层的制备及改性研究[D].厦门:厦门大学,2008.
4 Liu Yihong. Synthesis and its application on leather finishing of anti-yellowing polyacrylate/nano ZnO composite emulsion[D]. Xi’an: Shaanxi University of Science and Technology,2013(in Chinese).
刘易弘.耐黄变型聚丙烯酸酯/纳米ZnO皮革涂饰剂的合成及应用研究[D].西安:陕西科技大学,2014.
5 Liu Junli. Synthesis and properties of antimicrobial polyacrylate-based nanocomposite latex[D]. Xi’an: Shaanxi University of Scie-nce and Technology,2013(in Chinese).
刘俊莉. 抗菌型聚丙烯酸酯基纳米复合乳液的合成与性能研究[D].西安:陕西科技大学,2013.
6 Liu J L, Ma J Z, Bao Y, et al. Polyacrylate/surface-modified ZnO nanocomposite as film-forming agent for leather finishing[J]. Int J Polym Mater Polym Biomater,2014,63(16):809.
7 Li L. Antistatic property of SiO2 nanopower/poly-acrylate complex membrane[J]. Mater Mech Eng,2005,36(4):41(in Chinese).
李玲.纳米SiO2/聚丙烯酸酯复合膜抗静电性能研究[J]. 机械工程材料,2005,36(4):41.
8 He Xiaona. Preparation of flame retardant nano-powder/polyacrylate composite emulsion and coatings and investigation on their perfor-mance[D]. Hangzhou: Zhejiang Sci-Tech University,2011(in Chinese).
何晓娜.纳米阻燃粉体/聚丙烯酸酯复合乳液及涂层的制备与性能研究[D].杭州:浙江理工大学,2011.
9 Hu J, Ma J Z, Deng W. Properties of acrylic resin/nano-SiO2 lea-ther finishing agent prepared via emulsifier-free emulsion polymerization[J]. Mater Lett,2008,62(17):2931.
10 Yang L J, Komarneni S, Roy R. GEL adsorption processing for waste solidification in′NZP′ceramics[C]//MRS Proceedings. Cambridge,1983:567.
11 Liu J, Ma J, Bao Y, et al. Synthesis and application of polyacrylate/nano-SiO2 composite leather finishing agent with polymerizable surfactant[J]. Polym Plast Technol Eng,2012,51(14):1460.
12 Liu J, Ma J, Bao Y, et al. Nanoparticle morphology and film-for-ming behavior of polyacrylate/ZnO nanocomposite[J]. Compos Sci Technol,2014,98:64.
13 Bao Y, Ma J, Zhang X, et al. Recent advances in the modification of polyacrylate latexes[J]. J Mater Sci,2015,50(21):6839.
14 蓝剑.武利民.让国产涂料变得越来越完美[J].表面工程资讯,2010(3):4.
15 Bao Y, Shi C H, Yang Y Q, et al. Effect of hollow silica spheres on water vapor permeability of polyacrylate film[J]. RSC Adv,2015,5(15):11485.
16 Song H J, Zhang Z Z, Men X H, et al. A study of the tribological behavior of nano-ZnO-filled polyurethane composite coatings[J]. Wear,2010,269(1):79.
17 Dhoke S K, Khanna A S, Sinha T J M. Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings[J]. Prog Org Coat,2009,64(4):371.
18 Bora C, Bharali P, Baglari S, et al. Strong and conductive reduced graphene oxide/polyester resin composite films with improved mechanical strength, thermal stability and its antibacterial activity[J]. Compos Sci Technol,2013,87:1.
19 Zhang C, Hou T, Chen J, et al. Preparation of mesoporous silica microspheres with multi-hollow cores and their application in sustained drug release[J]. Particuology,2010,8(5):447.
20 Zhu Y F, Shi J L, Dong X P, et al. A facile method to synthesize novel hollow mesoporous silica spheres and advanced storage property[J]. Microp Mesop Mater,2005,84:218.
21 Yang X L, Yao K, Zhu Y H. Fabrication and sustained release property of nanostruetured hollow silica microspheres[J]. J Inorg Mater,2005,20(6):1403.
22 Chen J F, Ding H M, Wang J X, et al. Preparation and characterization of porous hollow silica nanoparticles for drug delivery application[J]. Biomaterials,2004,25(4):723.
23 Huang M H, Mao S, Feick H, et al. Room-temperature ultraviolet nanowire nanolasers[J]. Science,2001,292(5523):1897.
24 Li Z, Yang R, Yu M, et al. Cellular level biocompatibility and biosafety of ZnO nanowires[J]. J Phys Chem C,2008,112(51):20114.
25 Liao W, Gu A, Liang G, et al. New high performance transparent UV-curable poly (methyl methacrylate) grafted ZnO/silicone-acrylate resin composites with simultaneously improved integrated performance[J]. Colloids Surf A: Physicochem Eng Aspects,2012,396:74.
26 Ibáez J A, Litter M I, Pizarro R A. Photocatalytic bactericidal effect of TiO2 on Enterobacter cloacae: comparative study with other Gram (-) bacteria[J]. J Photochem Photobiol A: Chem,2003,157(1):81.
27 Elmolla E S, Chaudhuri M. Photocatalytic degradation of amoxicillin, ampicillin and cloxacillin antibiotics in aqueous solution using UV/TiO2 and UV/H2O2/TiO2 photocatalysis[J]. Desalination,2010,252(1):46.
28 Sun Q, Lu Y, Zhang H, et al. Hydrothermal fabrication of rutile TiO2 submicrospheres on wood surface: An efficient method to prepare UV-protective wood[J]. Mater Chem Phys,2012,133(1):253.
29 Rahimpour A, Jahanshahi M, Mollahosseini A, et al. Structural and performance properties of UV-assisted TiO2 deposited nano-compo-site PVDF/SPES membranes[J]. Desalination,2012,285:31.
30 Quagliarini E, Bondioli F, Goffredo G B, et al. Self-cleaning ma-terials on architectural heritage: compatibility of photo-induced hydrophilicity of TiO2 coatings on stone surfaces[J]. J Cultural Heri-tage,2013,14(1):1.
31 El Hajjouji H, Barje F, Pinelli E, et al. Photochemical UV/TiO2 treatment of olive mill wastewater (OMW)[J]. Bioresour Technol,2008,99(15):7264.
32 Chung K H, Jung H Y, Lee Y W, et al. Preparation of TiO2-loaded nanocapsules and their sun protection behaviors[J]. J Ind Eng Chem,2010,16(2):261.
33 Costa A, Chiarello G L, Selli E, et al. Effects of TiO2 based photocatalytic paint on concentrations and emissions of pollutants and on animal performance in a swine weaning unit[J]. J Environ Manage,2012,96(1):86.
34 Zori M H, Soleimani-Gorgani A. Ink-jet printing of micro-emulsion TiO2 nano-particles ink on the surface of glass[J]. J Eur Ceram Soc,2012,32(16):4271.
35 Bao Y, Yang Y Q, Ma J Z. Fabrication of monodisperse hollow silica spheres and effect on watervapor permeability of polyacrylate membrane [J]. J Colloid Interface Sci,2013,407:155.
36 Yang Yongqiang. Synthesis and application of polyacrylate/ hollow silica composite leather finishing agent for leather finishing[D]. Xi’an: Shaanxi University of Science and Technology,2014(in Chinese).
杨永强.聚丙烯酸酯/中空二氧化硅纳米复合皮革涂饰剂的制备及应用研究[D].西安:陕西科技大学,2014.
37 Lewis O D, Critchlow G W, Wilcox G D, et al. A study of the corrosion resistance of a waterborne acrylic coating modified with nano-sized titanium dioxide [J]. Prog Org Coat,2012,73(1):88.
38 Huang Z F, Qu X Y, Chen Z. Preparation and characterization of nano-SiO2/PMMA composite particles by emulsion polymerization [J]. J Synth Cryst,2013,42(5):938.
39 Wang Z Y, Lin X T, Chen H F, et al. In-situ preparation of nano-TiO2 modified polyacrylate (PA) Coatings[J]. Paint Coat Ind,2006,36(8):28(in Chinese).
王智宇,林旭添,陈海锋,等.原位生成法制备纳米 TiO2 改性聚丙烯酸酯涂料[J]. 涂料工业,2006,36(8):28.
40 Zhu J, Birgisson B, Kringos N. Polymer modification of bitumen: Advances and challenges[J]. Eur Polym J,2014,54:18.
41 Wang X Y, Ma J X, Li C G, et al. Thermosetting polyimide resin matrix composites with interpenetrating polymer networks for precision foil resistor chips based on special mechanical performance requirements[J]. Appl Surf Sci,2014,299:73.
42 Petchthanasombat C, Tiensing T, Sunintaboon P. Synthesis of zinc oxide-encapsulated poly (methyl methacrylate)-chitosan core-shell hybrid particles and their electrochemical property[J]. J Colloid Interface Sci,2012,369(1):52.
43 Yao L, Yang T T, Cheng S Y. Study of nano-silica/fluorinated acrylate copolymer hybrid emulsion and the polymerization kinetics[J]. Acta Polym Sin,2008(3):221(in Chinese).
姚丽,杨婷婷,程时远.纳米SiO2/含氟丙烯酸酯共聚物复合乳液的制备与性能及聚合动力学研究[J]. 高分子学报,2008(3):221.
44 Bao Y, Shi C, Ma J, et al. Double in-situ synthesis of polyacrylate/nano-TiO2 composite latex[J]. Prog Org Coat,2015,85:101.
45 Mekewi M, Shebl A, Imam A I, et al. Screening the insecticidal efficacy of nano ZnO synthesized via in-situ polymerization of crosslinked polyacrylic acid as a template[J]. J Mater Sci Technol,2012,28(11):961.
46 Gao D G, Duan X Y, Lv B, et al. Preparation and properties of polyacrylate/nano-SiO2 composite pickering emulsion[J]. Fine Chem,2016,33(4):445(in Chinese).
高党鸽,段羲颖,吕斌,等.聚丙烯酸酯/纳米二氧化硅Pickering复合乳液的制备及性能[J]. 精细化工,2016,33(4):445.
47 Chen J H, Cheng C Y, Chiu W Y, et al. Synthesis of ZnO/polystyrene composites particles by Pickering emulsion polymerization[J]. Eur Polym J,2008,44(10):3271.
48 Gao D G, Feng J F, Lv B, et al. Research progress of pickering emulsion and prospects in leather making[J]. China Leather,2015,44(13):49(in Chinese).
高党鸽,冯军芳,吕斌,等.Pickering乳状液的研究进展及其在制革中的前景展望(续)[J]. 中国皮革,2015,44(13):49.
49 Feng Junfang. Preparation and performance of polyacrylate/nano-ZnO composite emusion[D]. Xi’an: Shaanxi University of Science and Technology,2015(in Chinese).
冯军芳.聚丙烯酸酯/纳米ZnO复合乳液的制备及性能[D].西安:陕西科技大学,2015.
50 Tan J J, Peng W L, Ding S L. State and trends of test technology on hygienic proerty for leather shoes[J]. Leather Sci Eng,2009,19(4):60(in Chinese).
谈娟娟,彭文利,丁绍兰.皮鞋卫生性能分析检测技术的研究现状与趋势[J]. 皮革科学与工程,2009,19(4):60.
51 Jian J, Wang G H. Present situation and developmet of waterproof breathable coating fabric[J]. China Leather,2006,35(15):38(in Chinese).
贾娟,王革辉.防水透湿涂层织物的现状及发展趋势[J].中国皮革,2006,35(15):38.
52 Wang C N, Fan H J, Shi B, et al. Study on controllable water vapor permeability of thermal-sensitive polyurethane and leather/PU leathe[J]. China Leather,2006,35(13):26(in Chinese).
王春能,范浩军,石碧,等.温度感应聚氨酯及皮革/PU革的透气、透湿性的可控性研究[J]. 中国皮革,2006,35(13):26.
53 Zhang Z J, Ma J Z, Hu J. Study of the in-situ preparation of nano SiO2/acrylic resin leather coating agent[J]. Fine Chem,2006,23(11):1112(in Chinese).
张志杰,马建中,胡静.原位生成纳米SiO2/丙烯酸树脂皮革涂饰剂的研究[J].精细化工,2006,23(11):1112.
54 Cheng J F. Anti-mould technology of leather[J]. Chin J Disinfection,1992(2):109 (in Chinese).
程倞绯. 皮革防霉技术[J]. 中国消毒学杂志,1992(2):109.
55 Zhao T, Dai H, Xu W, et al. The application of nano-antibacterial material on leather industry[J]. China Leather,2005,34(17):31(in Chinese).
赵婷,戴红,许伟,等.纳米抗菌材料及其在制革领域的应用[J]. 中国皮革,2005,34(17):31.
56 Tian Wei. Syudy on yellow-stain resistance finishing resin for leather[D]. Zhengzhou: Zhengzhou University,2006(in Chinese).
田伟.耐黄变皮革涂饰材料的研究[D].郑州:郑州大学,2006.
57 Mirabedini S M, Sabzi M, Zohuriaan-Mehr J, et al. Weathering performance of the polyurethane nanocomposite coatings containing silane treated TiO2 nanoparticles[J]. Appl Surf Sci,2011,257(9):4196.
58 Zheng S J, Zhang L F. Preparation and properties of modified nano ZnO/acrylic compound finishing agent[J]. China Leather,2016,45(5):10(in Chinese).
郑顺姬,张立峰.改性纳米氧化锌/丙烯酸树脂复合涂饰剂的制备及性能研究[J].中国皮革,2016,45(5):10.
59 Xu Q N, Lu L, Wang L Y, et al. Study on hollow polyacrylate/casein-based silica nano-composite leather finishing agent[J]. J Shaanxi University of Science Technology,2015,35(3):7(in Chinese).
徐群娜,鲁璐,王璐瑶,等.中空型聚丙烯酸酯/酪素基SiO2纳米复合皮革涂饰剂的研究[J]. 陕西科技大学学报,2015,35(3):7.
60 Zhang W B, Ma J Z, Gao D G, et al. Preparation of amino-functio-nalized graphene oxide by Hoffman rearrangement and its perfor-mances on polyacrylate coating latex[J]. Prog Org Coat,2016,94:9.
61 Zhou J H, Chen X, Duan H, et al. Synthesis and characterization of nano-SiO2 modified fluorine-containing polyacrylate emulsifier-free emulsion[J]. Appl Surf Sci,2015,331:504.
62 Liu Y H, Ma J Z, Bao Y, et al. Preparation and application of polyacrylate/nano TiO2 composite latex[J]. China Leather,2012,41(23):1(in Chinese).
刘易弘,马建中,鲍艳,等.聚丙烯酸酯/纳米TiO2复合乳液的制备及应用[J].中国皮革,2012,41(23):1.
63 Zhao X L, Zhao W. Prospect on the proparation and application of organic-inorganic nanocomposite material in leather coating[J]. China Leather,2003,31(17):28(in Chinese).
张晓镭,赵维.有机-无机纳米复合材料的制备及其在皮革涂饰中的应用前景[J]. 中国皮革,2003,31(17):28.
[1] 张甄, 王宝冬, 徐文强, 秦绍东, 孙琦. 黑色二氧化钛纳米材料研究进展[J]. 材料导报, 2019, 33(z1): 8-15.
[2] 张燕. 一步法制备无表面修饰剂花状金纳米颗粒及其表面增强拉曼散射性能研究[J]. 材料导报, 2019, 33(z1): 314-317.
[3] 高科, 李万万. 近红外二区光声成像造影剂的研究进展[J]. 材料导报, 2019, 33(z1): 481-484.
[4] 侯珊, 刘向春. 新型光催化剂钨酸锌的制备及性能改性研究进展[J]. 材料导报, 2019, 33(9): 1541-1549.
[5] 杨焜, 王春来, 丁晟, 刘长军, 田丰, 李钒. 荧光碳量子点:合成、特性及在肿瘤治疗中的应用[J]. 材料导报, 2019, 33(9): 1475-1482.
[6] 叶凯, 梁风, 姚耀春, 马文会, 杨斌, 戴永年. 直流电弧等离子体法制备纳米材料的研究进展[J]. 材料导报, 2019, 33(7): 1089-1098.
[7] 阮子林, 郝振亮, 张辉, 卢建臣, 蔡金明. Cu2-xS(0≤x≤1)化合物:制备技术、物理特性及应用[J]. 材料导报, 2019, 33(7): 1141-1155.
[8] 陈娟, 江琦. 自组装技术在特殊形貌无机纳米材料制备中的作用[J]. 材料导报, 2019, 33(3): 454-461.
[9] 安文,马建中,徐群娜. 功能型酪素基复合材料的研究进展[J]. 材料导报, 2019, 33(15): 2602-2609.
[10] 刘春泉,彭其春,薛正良,吴腾. Fe-Mn-Al-C系列低密度高强钢的研究现状[J]. 材料导报, 2019, 33(15): 2572-2581.
[11] 张腾, 唐天宇, 侯仰龙. 面向锂硫电池的高负载量碳硫复合正极材料研究进展[J]. 材料导报, 2019, 33(1): 90-102.
[12] 刘兰燕,宋俊,程博闻,薛文池,郑云波. 木质素基碳纤维制备的研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 405-411.
[13] 刘云子,张伟,宋占永. 金属纳米颗粒导电墨水制备与后处理工艺的研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 391-397.
[14] 管庆顺,李建,宋如愿,徐朝阳,吴伟兵,景宜,戴红旗,房桂干. 基于纳米材料的气凝胶制备及应用[J]. 《材料导报》期刊社, 2018, 32(3): 384-390.
[15] 宋晔, 缪远玲, 孟月东, 王奇. 利用等离子体技术制备和改性碳基纳米材料的研究进展[J]. 材料导报, 2018, 32(19): 3295-3303.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[9] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
[10] WU Tao, MAO Lili, WANG Haizeng. Preparation and Defluoridation Performance of Mg/Fe-LDHO/PES Membranous Adsorbent[J]. Materials Reports, 2017, 31(14): 26 -30 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed