镁合金轧制边裂损伤模型的研究进展

doi:10.11896/cldb.23110051

材料导报

2024, Vol. 38

Issue (24): 23110051-8 https://doi.org/10.11896/cldb.23110051

金属与金属基复合材料

镁合金轧制边裂损伤模型的研究进展

卢慧扬, 林金保^*, 刘惠民, 王炳权, 李一豪, 陈巽

太原科技大学应用科学学院,太原 030024

Research Progress of Rolling Edge Crack of Magnesium Alloy Sheet

LU Huiyang, LIN Jinbao^*, LIU Huimin, WANG Bingquan, LI Yihao, CHEN Xun

School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 3762KB )
输出: BibTeX | EndNote (RIS)

摘要边部裂纹严重影响镁合金板材在轧制生产中的成形性能,是镁合金轧制不可忽视的缺陷。精确的损伤分析有助于揭示边部裂纹的产生机制,因此需要对镁合金轧制边裂损伤模型进行研究。尽管目前镁合金轧制边裂损伤分析模型的研究取得了一定的进展,但总结现有数据的综述论文较少。本文从镁合金轧制边裂损伤机制出发,分析了国内外学者关于边裂损伤的定义、形成、影响因素和控制的研究进展,重点汇总了非耦合与耦合的镁合金轧制边裂损伤分析模型,为完善镁合金轧制工艺理论体系和改进镁合金轧制工艺提供了参考,最后指出了当前镁合金轧制边裂损伤研究中存在的问题,并对未来的研究方向进行了展望。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	卢慧扬
	林金保
	刘惠民
	王炳权
	李一豪
	陈巽

关键词: 镁合金板材轧制边裂损伤模型

Abstract: The edge cracks seriously affect the formability of magnesium alloy sheet in rolling production, and can not be ignored in magnesium alloy rol-ling. It is necessary to study the generation mechanism and damage model of magnesium alloy rolling edge crack to achieve accurate da-mage analysis of edge crack. Although there are many researches have been published on the analysis model of magnesium alloy edge crack damage, there are few papers summarizing the available data. In this summary, the mechanism of edge crack damage in magnesium alloy rolling is briefly described. The research progress of the definition and formation, the influencing factors, the damage control of edge crack damage are analyzed. The analysis models of magnesium alloy rolling edge crack damage based on continuum damage mechanics, continuous damage mechanics and mesoscopic damage mechanics are summarized, which provides reference for improving the theoretical system of magnesium alloy rolling process and improving the rolling process of magnesium alloy. Finally, the existing problems in the research of edge crack damage of magnesium alloy rolling are pointed out, and the future research direction is prospected.

Key words: magnesium alloy sheet rolling edge cracking damage model

出版日期: 2024-12-25 发布日期: 2024-12-20

ZTFLH:

TG339

基金资助: 国家自然科学基金(52275356)

通讯作者: * 林金保,太原科技大学应用科学学院教授、博士研究生导师。2001年太原重型机械学院金属压力加工和计算机科学与技术专业双学士学位,2004年太原科技大学材料加工工程专业硕士毕业后到太原科技大学工作,2009年上海交通大学材料加工工程专业博士毕业。目前主要从事金属塑性成型、有限元数值模拟、金属基复合材料成型及性能等方面的研究工作。发表论文100余篇,主持科研项目20余项等。 linjinbao@tyust.edu.cn

作者简介: 卢慧扬,现为太原科技大学应用科学学院硕士研究生,在林金保教授的指导下进行研究。目前主要研究领域为先进材料变形行为及力学性能。

引用本文:

卢慧扬, 林金保, 刘惠民, 王炳权, 李一豪, 陈巽. 镁合金轧制边裂损伤模型的研究进展[J]. 材料导报, 2024, 38(24): 23110051-8.
LU Huiyang, LIN Jinbao, LIU Huimin, WANG Bingquan, LI Yihao, CHEN Xun. Research Progress of Rolling Edge Crack of Magnesium Alloy Sheet. Materials Reports, 2024, 38(24): 23110051-8.

链接本文:

http://www.mater-rep.com/CN/10.11896/cldb.23110051 或 http://www.mater-rep.com/CN/Y2024/V38/I24/23110051

1 Zhao L J, Ma L F, Han Y Z, et al. Materials Reports, 2020, 34(21), 21135(in Chinese).
赵磊杰, 马立峰, 韩廷状, 等. 材料导报, 2020, 34(21), 21135.
2 Sun H F, Liang S J, Wang E D. Transactions of Nonferrous Metals Society of China, 2009, 19(s2), s349.
3 Tian J, Lu H H, Zhang W G, et al. Journal of Magnesium and Alloys, 2022, 10(8), 2193.
4 Liu Z C, Zheng X P, Li H B, et al. Materials for Mechanical Engineering, 2023, 47(3), 85 (in Chinese).
刘泽成, 郑小平, 李红斌, 等. 机械工程材料, 2023, 47(3), 85.
5 Jia W T, Xu S, Le Q C, et al. Materials & Design, 2016, 106, 120.
6 Zhang D F, Dai Q W, Hu Y B, et al. Journal of Materials Engineering, 2009(10), 85 (in Chinese).
张丁非, 戴庆伟, 胡耀波, 等. 材料工程, 2009(10), 85.
7 Kim W Y, Kim W J. Materials Science & Engineering:A, 2014, 594(2), 189.
8 Shang X Q, Zhang H M, Wang L Y, et al. International Journal of Plasticity, 2021, 144, 103040.
9 Xu S N, Qian L Y, Sun C Y, et al. Journal of Materials Research and Technology, 2023, 27, 7368.
10 Dai Q W. Study on rolling of Mg alloy and mechanism of edge cracks. Ph. D. Thesis, Chongqing University, China, 2011 (in Chinese).
戴庆伟. 镁合金轧制变形及边裂机制研究. 博士学位论文, 重庆大学, 2011.
11 Zhang D F, Dai Q W, Fang L, et al. Transactions of Nonferrous Metals Society of China, 2011, 21(5), 1112.
12 Zhang D F, Dai Q W, Hu Y B, et al. Journal of Materials Engineering, 2011(1), 92(in Chinese).
张丁非, 戴庆伟, 胡耀波, 等. 材料工程, 2011(1), 92.
13 Sun Q. Research on damage and fracture behavior of steel strip during rolling process. Ph. D. Thesis, East China University of Science and Technology, China, 2016 (in Chinese).
孙权. 带钢轧制过程损伤与开裂行为的研究. 博士学位论文, 华东理工大学, 2016.
14 Wang X Y. Research of rolling stress state and edge crack damage of AZ31 magnesium alloy. Master’s Thesis, Taiyuan University of Science and Technology, China, 2019 (in Chinese).
王心怡. AZ31镁合金轧制应力状态分析及边裂损伤研究. 硕士学位论文, 太原科技大学, 2019.
15 Cockroft M G, Latham D J. Ductility and the Workability of Metals, 1968, 96, 33.
16 Lu S S, Bao R, Zhang T, et al. Frattura ed Integrita Strutturale, 2016, 10(35), 74.
17 Fan Q H, Gao H W, Chu Z B. Journal of Taiyuan University of Technology, 2023, 54(2), 225 (in Chinese).
范沁红, 高宏伟, 楚志兵. 太原理工大学学报, 2023, 54(2), 225.
18 Kweon S. Mechanics Research Communications, 2015, 63, 13.
19 Huang Z Q, Huang Q X, Wei J C, et al. Rare Metal Materials and Engineering, 2016, 45(6), 1461 (in chinese).
黄志权, 黄庆学, 韦建春, 等. 稀有金属材料与工程, 2016, 45(6), 1461.
20 Huang Z Q, Wei J C, Ma L F, et al. Rare Metal Materials and Engineering, 2018, 47(6), 1926 (in Chinese).
黄志权, 韦建春, 马立峰, 等. 稀有金属材料与工程, 2018, 47(6), 1926.
21 Xie H B, Jiang Z Y, Yuen W Y D. Tribology International, 2011, 44(9), 971.
22 Guo F, Zhang D F, Yang X S, et al. Materials Science and Engineering: A, 2014, 607, 383.
23 Zhu S Q, Yan H G, Chen J H, et al. Scripta Materialia, 2010, 63(10), 985.
24 Kim W J, Hong S I, Lee J M, et al. Materials Science and Engineering: A, 2013, 559, 325.
25 Zhi C C, Ma L F, Huang Q X, et al. Journal of Materials Processing Technology, 2018, 255, 333.
26 Toribio J, González B, Matos J C. Engineering Fracture Mechanics, 2010, 77(11), 2024.
27 Dreyer C E, Chiu W V, Wagoner R H, et al. Journal of Materials Processing Technology, 2010, 210(1), 37.
28 He J J, Mao Y, Lu S L, et al. Materials Science and Engineering: A, 2019, 760, 174.
29 Pekguleryuz M, Celikin M, Hoseini M, et al. Journal of Alloys and Compounds, 2012, 510(1), 15.
30 Zhang H L, Meng M, Yang X, et al. Journal of Materials Research and Technology, 2023, 22, 2093.
31 Han X Z, Hu L, Jia D Y, et al. Transactions of Nonferrous Metals Society of China, 2023, 33(8), 2351.
32 Liu J L, Qi Y Y, Wang T, et al. Materials Reports A: Review Papers, 2020, 34(7), 7138 (in Chinese).
刘江林, 齐艳阳, 王涛, 等. 材料导报:综述篇, 2020, 34(7), 7138.
33 Huang Z Q, Huang Q X, Ma L F, et al. Hot Working Technology, 2014, 43(17), 1(in Chinese).
黄志权, 黄庆学, 马立峰, 等. 热加工工艺, 2014, 43(17), 1.
34 Liu Q, Feng B, Yang H, et al. Journal of Materials Research and Technology, 2022, 19, 5037.
35 Jia W T, Le Q C, Tang Y, et al. Journal of Materials Science & Technology, 2018, 34(11), 2069.
36 Huang Z Q, Qi C L, Yang G W, et al. Journal of Materials Engineering and Performance, 2020, 29, 3906.
37 Ma L F, Pang Z N, Huang Q X, et al. Rare Metal Materials and Engineering, 2014, 43(S1), 387 (in Chinese).
马立峰, 庞志宁, 黄庆学, 等. 稀有金属材料与工程, 2014, 43(S1), 387.
38 Ma L F, Pang Z N, Ma Z Y, et al. Journal of Materials Science and Engineering, 2014, 32(5), 665 (in Chinese).
马立峰, 庞志宁, 马自勇, 等. 材料科学与工程学报, 2014, 32(5), 665.
39 Ning F K, Zhou X, Le Q C, et al. Materials Today Communications, 2020, 24, 2352.
40 Huang Z Q, Huang Q X, Wei J C, et al. Journal of Materials Processing Technology, 2017, 246, 85.
41 Yang H Z, Nie H H, Liu Q F, et al. Hot Working Technology, 2024(10), 133(in Chinese).
杨汉章, 聂慧慧, 刘群峰, 等. 热加工工艺, 2024(10), 133.
42 Cockcroft M G, Latham D J. Journal of Engineering Materials and Technology, 1968, 96, 33.
43 Freudenthal A M. The inelastic behavior of metals, Wiley, New York, 1950.
44 Oyane M, Sato T, Okimoto K, et al. Journal of Mechanical Working Technology, 1980, 4(1), 65.
45 Zhang D F, Dai Q W, Fang L, et al. Transactions of Nonferrous Metals Society of China, 2011, 21(5), 1112.
46 Wei J C, Huang Q X, Huang Z Q, et al. Rare Metal Materials and Engineering, 2018, 47(2), 652(in Chinese).
韦建春, 黄庆学, 黄志权, 等. 稀有金属材料与工程, 2018, 47(2), 652.
47 Nie H H, Zheng L W, Tian J, et al. Journal of Mechanical Engineering, 2021, 57(8), 146(in Chinese).
聂慧慧, 郑留伟, 田静, 等. 机械工程学报, 2021, 57(8), 146.
48 Huang Z Q, Qi C L, Zou J C, et al. Journal of Magnesium and Alloys, 2023, 11(6), 2151.
49 Ning F K, Jia W T, Hou J, et al. Materials Research Express, 2018, 5, 056528.
50 Qi Y Y, Liu J L, Wang T. et al. Chinese Journal of Rare Metals, 2022, 46(7), 873(in Chinese).
齐艳阳, 刘江林, 王涛, 等. 稀有金属材料与工程, 2022, 46(7), 873.
51 Nobutsune H, Yoshihara M, Sekine T, et al. Tetsu-to-Hagane, 1981, 67(15), 241.
52 Jia W T, Ma L F, Le Q C, et al. Journal of Alloys and Compounds, 2019, 783, 863.
53 Jia W T, Ma L F, Jiao M Y, et al. Journal of Materials Research and Technology, 2020, 9(3), 4773.
54 Yang X, Zhang Z M, Meng M, et al. Journal of Materials Research and Technology, 2022, 18, 255.
55 Chen X M, Lu Y F, Ning M T, et al. Materials Science and Engineering: A, 2023, 871, 144857.
56 Jia W T, Wang L J, Ma L F, et al. Journal of Materials Research and Technology, 2022, 17, 2047.
57 Zheng L H, Wang Z J, Meng B, et al. International Journal of Plasticity, 2023, 164, 0749.
58 McClintock F A. Journal of applied mechanics, 1968, 35(2), 363.
59 Rice J R, Tracey D M. Journal of the Mechanics and Physics of Solids, 1969, 17(3), 201.
60 Gurson A L. Journal of Engineering Materials and Technology, 1977, 99(1), 2.
61 Wang R Z, Chen Z H, Li Y J, et al. Hot Working Technology, 2013, 42(17), 73 (in Chinese).
王瑞泽, 陈章华, 李雨洁, 等. 热加工工艺, 2013, 42(17), 73.
62 Wang R Z, Chen Z H, Zang Y. Journal of University of Science and Technology Beijing, 2014, 36(4), 459 (in Chinese).
王瑞泽, 陈章华, 臧勇, 等. 北京科技大学学报, 2014, 36(4), 459.
63 Zhou X, Wen D, Shen M Q, et al. Acta Aeronautica et Astronautica Sinica, 2018, 39(5), 218 (in Chinese).
周霞, 文冬, 沈梦祺, 等. 航空学报, 2018, 39(5), 218.
64 Zhang S S. Finite element simulation and experimental study of magnesium alloy rolling based on electromagnetic induction heating. Master’s Thesis, Yanshan University, China, 2023 (in Chinese).
张帅帅. 基于电磁感应加热的镁板轧制有限元模拟和实验. 硕士学位论文, 燕山大学, 2023.
65 Shi L Q. Study on suppression of edge crack of magnesium alloy AZ31 room temperature rolling with electric pulse. Master’s Thesis, Yanshan University, China, 2023 (in Chinese).
史立强. 电脉冲辅助镁合金AZ31室温轧制边裂抑制规律性的研究. 硕士学位论文, 燕山大学, 2023.
66 Yan Y X, Sun Q, Chen J J, et al. Journal of Materials Processing Technology, 2013, 213(4), 924.
67 Sun Q, Chen J J, Li X X, et al. Procedia Materials Science, 2014, 3, 1632.
68 Sun Q, Zan D Q, Chen J J, et al. Theoretical and Applied Fracture Mechanics, 2015, 80(B), 259.
69 Zhao C C, Wang T, Li Z X, et al. International Journal of Mechanical Sciences, 2023, 241, 107961.
70 Lemaitre J. Journal of Engineering Materials and Technology, 1985, 107(1), 83.
71 Zhang K, Badreddine H, Yue Z M, et al. International Journal of Solids and Structures, 2021, 217-218, 155.
72 Nezhad S M S, Aboutalebi H F. Engineering Failure Analysis, 2022, 139, 106509.
73 Bonora N. Engineering Fracture Mechanics, 1997, 58(1-2), 11.
74 Oh S I, Kobayashi S. Journal of Engineering for Industry, 1976, 98(3), 800.
75 Tetsuro Inoue. International Journal of Solids and Structures, 1996, 33(26), 3906.
76 Brozzo P, DeLuca B, Rendina R. In: Proceedings of the Seventh Biennial Conference of the International Deep Drawing Research Group. Milan, Italy, 1972.
77 Argon A S, Im J, Safoglu R. Metallurgical transactions A, 1975, 6, 825.

[1]	梁艳玲, 霍润科, 宋战平, 穆彦虎, 秋添, 宋子羿. 基于矿物溶解理论的砂岩化学损伤动态模型[J]. 材料导报, 2024, 38(8): 22080206-7.
[2]	凌子涵, 王利卿, 张震, 赵占勇, 白培康. 镁合金电弧增材技术基本工艺及工艺因素影响综述[J]. 材料导报, 2024, 38(7): 22090013-9.
[3]	钟丽萍, 路迢迢, 孙林超, 张梅, 王亮亮, 王永建. 镁合金多向锻造技术的研究现状与展望[J]. 材料导报, 2024, 38(23): 23070200-11.
[4]	夏二立, 叶拓, 邱飒蔚, 郭鹏程, 吴远志, 李落星. 不同加载路径和应变速率下挤压Mg-8.0Al-0.1Mn镁合金的力学响应行为[J]. 材料导报, 2024, 38(22): 24060132-8.
[5]	刘亚敏, 韩旭晖, 高晨光, 钟国亮. 全程老化沥青中温抗疲劳性能及预测模型研究[J]. 材料导报, 2024, 38(21): 23070147-6.
[6]	叶拓, 邱飒蔚, 夏二立, 郭鹏程, 吴远志, 李落星. 不同加载路径下挤压WE43镁合金的高速冲击力学响应及本构模型[J]. 材料导报, 2024, 38(20): 24050146-9.
[7]	张娜娜, 李全安, 陈晓亚, 陈培军, 谭劲峰. 高性能镁合金轧制成形研究进展[J]. 材料导报, 2024, 38(2): 22080125-9.
[8]	关虓, 龙行, 丁莎, 张鹏鑫. 煤矸石粉混凝土冻融损伤模型与劣化机制[J]. 材料导报, 2024, 38(16): 22080144-9.
[9]	任东亭, 王文权, 张新戈, 杜文博, 朱胜. 镁合金基体超音速等离子喷涂Al-Al₂O₃复合涂层组织与耐腐蚀性能研究[J]. 材料导报, 2024, 38(16): 22120140-7.
[10]	程春龙, 陈正, 陈长玖, 柳力晨, 乐启炽. 镁合金表面高温氧化膜CO₂矿化处理研究[J]. 材料导报, 2024, 38(16): 23040159-6.
[11]	计鸿鑫, 任伟杰, 蒋先贤, 杜文宇, 孙静娜, 黄华贵. 镁合金板材弯曲回弹预测与控制研究进展[J]. 材料导报, 2024, 38(15): 23080183-7.
[12]	肖雯心, 王叶, 马凯, 代朝能, 裴三略, 王丹芊, 王敬丰. 镁合金表面化学转化涂层研究进展[J]. 材料导报, 2024, 38(12): 23010121-12.
[13]	龙飞, 刘瞿, 朱艺星, 周梦然, 陈高强, 史清宇. 搅拌摩擦加工调控Mg-5Zn-0.6Zr合金耐蚀性的研究[J]. 材料导报, 2024, 38(10): 23020077-6.
[14]	吴伟喆, 刘阳, 张艺欣, 黄建山, 闫国威. 冻融环境下FRCC孔隙结构与力学性能研究综述[J]. 材料导报, 2023, 37(S1): 23010108-12.
[15]	安凌云, 常成功, 康迪菘, 王钊, 孟雷超, 彭建洪. 镁合金微弧氧化膜在三种饱和盐溶液中的耐蚀性研究[J]. 材料导报, 2023, 37(7): 21070250-10.

[1]	Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2]	Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[3]	Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[4]	Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[5]	Yingke WU,Jianzhong MA,Yan BAO. Advances in Interfacial Interaction Within Polymer Matrix Nanocomposites[J]. Materials Reports, 2018, 32(3): 434 -442 .
[6]	Zhengrong FU,Xiuchang WANG,Qinglin JIN,Jun TAN. A Review of the Preparation Techniques for Porous Amorphous Alloys and Their Composites[J]. Materials Reports, 2018, 32(3): 473 -482 .
[7]	Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅡ: Durability and Life Prediction Model[J]. Materials Reports, 2018, 32(3): 496 -502 .
[8]	Lixiong GAO,Ruqian DING,Yan YAO,Hui RONG,Hailiang WANG,Lei ZHANG. Microbial-induced Corrosion of Concrete: Mechanism, Influencing Factors,Evaluation Indices, and Proventive Techniques[J]. Materials Reports, 2018, 32(3): 503 -509 .
[9]	Ningning HE,Chenxi HOU,Xiaoyan SHU,Dengsheng MA,Xirui LU. Application of SHS Technique for the High-level Radioactive Waste Disposal[J]. Materials Reports, 2018, 32(3): 510 -514 .
[10]	Haoran CHEN, Yingdong XIA, Yonghua CHEN, Wei HUANG. Low-dimensional Perovskites: a Novel Candidate Light-harvesting Material for Solar Cells that Combines High Efficiency and Stability[J]. Materials Reports, 2018, 32(1): 1 -11 .

Viewed

Full text

Abstract

Cited

Shared

Discussed