Please wait a minute...
材料导报  2024, Vol. 38 Issue (15): 23080183-7    https://doi.org/10.11896/cldb.23080183
  先进有色金属材料加工及性能调控 |
镁合金板材弯曲回弹预测与控制研究进展
计鸿鑫1,2, 任伟杰1,2,*, 蒋先贤1,2, 杜文宇1,2, 孙静娜1,2, 黄华贵1,2
1 国家冷轧板带装备及工艺工程技术研究中心,河北 秦皇岛 066004
2 燕山大学机械工程学院,河北 秦皇岛 066004
Research Progress on the Prediction and Control of Springback During Bending of Magnesium Alloy Sheets
JI Hongxin1,2, REN Weijie1,2,*, JIANG Xianxian1,2, DU Wenyu1,2, SUN Jingna1,2, HUANG Huagui1,2
1 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Qinhuangdao 066004, Hebei, China
2 School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
下载:  全 文 ( PDF ) ( 11350KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 镁合金是最轻的工程金属材料,在新能源汽车、航空航天等领域具有广阔的应用前景,而在这些领域中广泛存在弯曲变形。但镁合金弹性模量较低,室温弯曲成形回弹量大且不易控制,严重影响构件成形精度和后期服役性能,精确预测和控制镁合金回弹仍是目前亟待解决的重要问题。近年来,为了提高镁合金的成形精度,并扩大其工业化应用,各国学者针对镁合金板材弯曲回弹预测及控制方法进行了大量研究。本文综述了镁板弯曲回弹预测与控制的最新研究进展,介绍了常见的镁合金回弹预测手段,对比分析了镁合金回弹的影响因素与控制方法,最后对镁板弯曲回弹未来研究重点进行了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
计鸿鑫
任伟杰
蒋先贤
杜文宇
孙静娜
黄华贵
关键词:  镁合金  弯曲  回弹  预测  控制    
Abstract: Magnesium (Mg) alloy is the lightest engineering metal and has broad application prospects in new energy vehicles, aerospace fields, etc., where bending deformation is widespread. However, due to the low elastic modulus, the springback of Mg alloy is large and not easy to control when bending at room temperature, which seriously affects the forming precision and post service performance of parts. So, accurate prediction and control of springback for Mg alloys is still an important problem to be solved at present. In recent years, in order to improve the forming precision of Mg alloy and expand its industrial application, scholars in various countries have proposed many methods for predicting and controlling the springback of Mg alloys. In this paper, the research progress on the prediction and control of springback during bending of Mg alloy is reviewed, several common methods in predicting the springback are introduced, and the influencing factors and control methods of springback are analyzed. Finally, future research directions on this field were proposed.
Key words:  magnesium alloy    bending    springback    predict    control
出版日期:  2024-08-10      发布日期:  2024-08-29
ZTFLH:  TB31  
基金资助: 国家自然科学基金(52201144;U20A20230);燕山大学基础创新科研培育项目(2021LGQN013)
通讯作者:  * 任伟杰,燕山大学机械工程学院讲师、硕士研究生导师。2020年12月获重庆大学材料科学与工程专业博士学位,后到燕山大学工作至今。目前主要从事镁合金先进成形、微观组织表征、晶体塑性多尺度模拟等方面的研究工作。主持和参与国家自然科学基金3项,发表学术论文20余篇,包括Scripta Material、Journal of Materials Science & Technology、Materials Science and Engineering:A、《金属学报》等。wjren@ysu.edu.cn   
作者简介:  计鸿鑫,2021年6月毕业于河北农业大学,获得工学学士学位,现为燕山大学机械工程学院硕士研究生,在任伟杰老师的指导下进行研究。目前主要从事电脉冲辅助Mg-13Gd-4Y-2Zn-0.5Zr合金弯曲成形研究。
引用本文:    
计鸿鑫, 任伟杰, 蒋先贤, 杜文宇, 孙静娜, 黄华贵. 镁合金板材弯曲回弹预测与控制研究进展[J]. 材料导报, 2024, 38(15): 23080183-7.
JI Hongxin, REN Weijie, JIANG Xianxian, DU Wenyu, SUN Jingna, HUANG Huagui. Research Progress on the Prediction and Control of Springback During Bending of Magnesium Alloy Sheets. Materials Reports, 2024, 38(15): 23080183-7.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.23080183  或          http://www.mater-rep.com/CN/Y2024/V38/I15/23080183
1 Pollock T M. Science, 2010, 328(5981), 986.
2 Yang Y, Xiong X M, Chen J, et al. Journal of Magnesium and Alloys, 2021, 9(3), 705.
3 Cepeda-Jiménez C M, Pérez-Prado M T. Acta Materialia, 2016, 108, 304.
4 Wang L F, Huang G S, Zhang H, et al. Journal of Materials Processing Technology, 2013, 213(6), 844.
5 Xie H Y, Wang Q, Liu K, et al. Journal of Materials Processing Technology, 2015, 219, 321.
6 Li B, Mcclelland Z, Horstemeyer S J, et al. Materials & Design, 2015, 66, 575.
7 Leu D K, Zhuang Z W. Journal of Mechanical Science and Technology, 2016, 30(3), 1077.
8 Huang G S, Wang L F, Zhang H, et al. Materials Letters, 2013, 98, 47.
9 Ren W J, Li J J, Xin R L. Scripta Materialia, 2019, 170, 6.
10 Ma L F, Ma Z Y, Jia W T, et al. The International Journal of Advanced Manufacturing Technology, 2015, 79, 1519.
11 Zhan M, Wang Y, Yang H, et al. Journal of Materials Processing Technology, 2016, 236, 123.
12 Zhang Z Y. The effect of precipitations and twin-detwining behaviors on the shift of neutral layer of AZ80 magnesium alloy plate. Master’s Thesis, Taiyuan University of Technology, China, 2021 (in Chinese).
张征勇. 析出相和孪生-去孪生机制对AZ80镁合金板材中性层偏移机制的影响. 硕士学位论文, 太原理工大学, 2021.
13 Desinghege S G, Hodgson P, Weiss M. Journal of Materials Processing Technology, 2021, 289, 116951.
14 Wu W, Qiao H, An K, et al. International Journal of Plasticity, 2014, 62, 105.
15 Barlat F, Brem J C, Yoon J W, et al. International Journal of Plasticity, 2003, 19(9), 1297.
16 Guo L, Jia W P, Du K, et al. Journal of Liaoning University of Science and Technology, 2012, 35(4), 360 (in Chinese).
郭磊, 贾维平, 杜坤, 等. 辽宁科技大学学报, 2012, 35(4), 360.
17 Bao J. Springback prediction of roll forming of magnesium alloy sheet. Master’s Thesis, North China University of Technology, China, 2021 (in Chinese).
暴杰. 镁合金板辊弯成形回弹预测研究. 硕士学位论文, 北方工业大学, 2021.
18 Yu H Y, Wu H Y, Wang L. In:IOP Conference Series:Materials Science and Engineering. Seoul, 2020, pp.012046.
19 Cáceres C H, Sumitomo T, Veidt M. Acta Materialia, 2003, 51(20), 6211.
20 Hama T, Takuda H. International Journal of Plasticity, 2011, 27(7), 1072.
21 Hama T, Kitamura N, Takuda H. Materials Science and Engineering:A, 2013, 583, 232.
22 Shiraishi K, Mayama T, Yamasaki M, et al. Materials Science and Engineering:A, 2020, 790, 139679.
23 Wang H, Lee S Y, Wang H M, et al. Scripta Materialia, 2020, 176, 36.
24 Tang W Q, Lee J Y, Wang H M, et al. Journal of Magnesium and Alloys, 2021, 9(3), 927.
25 Paudel Y, Indeck J, Hazeli K, et al. Acta Materialia, 2020, 183, 438.
26 Lee J, Bong H J, Lee Y S, et al. Metallurgical and Materials Transactions A, 2019, 50, 2720.
27 Jafari M, Lotfi M, Ghaseminejad P, et al. Transactions of the Indian Institute of Metals, 2015, 68(5), 969.
28 Hama T, Kariyazaki Y, Ochi K, et al. Materials Transactions, 2010, 51(4), 685.
29 Kim H W, Yu J H, Lee C W. Transactions of Materials Processing, 2018, 27(3), 139.
30 Huang G S, Wang Y X, Wang L F, et al. Transactions of Nonferrous Metals Society of China, 2015, 25(3), 732.
31 Kim D, Kim J H, Lee M G, et al. Materials Research Innovations, 2011, 15, 183.
32 Troitskii O A, Likhtman V I. Soviet Physics Doklady, 1963, 8, 91.
33 Ren D X, Zeng F Y, Liu L M, et al. Materials, 2019, 12(6), 977.
34 Chu X R, Wang L, Lin S X, et al. Acta Metallurgica Sinica (English Letters), 2018, 31, 1249.
35 Park J W, Jeong H J, Jin S W, et al. Transactions of Materials Processing, 2018, 27(3), 177.
36 Li M Q, Shen Y D, Luo K. et al. Nature Materials, 2023, 22, 958.
37 Sprecher A F, Mannan S L, Conrad H. Acta Metallurgica, 1986, 34(7), 1145.
38 Wang X W, Xu J, Jiang Z L, et al. Materials Science and Engineering:A, 2016, 659, 215.
39 Ren W J. Modeling the inhomogeneous deformation and twinning behaviors during bending of magnesium alloy with crystal plasticity FEM. Ph. D. Thesis, Chongqing University, China, 2020 (in Chinese).
任伟杰. 镁合金弯曲变形不均匀性与孪生行为的晶体塑性有限元模拟. 博士学位论文, 重庆大学, 2020.
40 Kim H H, Kang C G. In:Engineering Plasticity and Its Applications. Wuhan, 2011, pp.331.
41 Hama T, Suzuki T, Nakatsuji Y, et al. Materials Transactions, 2020, 61(5), 941.
42 Yu J H, Lee C W. Materials, 2021, 14(14), 3856.
43 Chen F K, Huang T B. Journal of Materials Processing Technology, 2003, 142(3), 643.
44 Youn H W, Kyeong J H, Park K, et al. Journal of the Korean Society for Precision Engineering, 2021, 38(10), 775.
[1] 凌子涵, 王利卿, 张震, 赵占勇, 白培康. 镁合金电弧增材技术基本工艺及工艺因素影响综述[J]. 材料导报, 2024, 38(7): 22090013-9.
[2] 吴思远, 单忠德, 陈恳, 刘丰, 刘晓军, 严春晖. 3D打印连续纤维增强树脂T型梁的弯曲性能[J]. 材料导报, 2024, 38(7): 22090150-7.
[3] 张霞, 吴瑛, 袁牧锋, 王春栋. MOFs衍生物在尿素氧化中的研究进展[J]. 材料导报, 2024, 38(6): 23020193-10.
[4] 靳红华, 任青阳, 肖宋强, 任小坤. 模拟酸雨侵蚀环境下悬臂抗滑桩耐久性极限寿命预测[J]. 材料导报, 2024, 38(5): 22070148-8.
[5] 董健苗, 何其, 周铭, 王振宇, 庄佳桥, 邹明璇, 李万金. 石墨烯水泥砂浆抗碳化试验及预测模型分析[J]. 材料导报, 2024, 38(5): 22070184-6.
[6] 梁宁慧, 毛金旺, 游秀菲, 刘新荣, 周侃. 多尺度聚丙烯纤维混凝土弯曲疲劳寿命试验及数值模拟[J]. 材料导报, 2024, 38(4): 22040023-8.
[7] 董昊良, 李化建, 杨志强, 温家馨, 黄法礼, 王振, 易忠来. 混凝土冻融破坏机理及寿命预测方法[J]. 材料导报, 2024, 38(2): 22070123-11.
[8] 张娜娜, 李全安, 陈晓亚, 陈培军, 谭劲峰. 高性能镁合金轧制成形研究进展[J]. 材料导报, 2024, 38(2): 22080125-9.
[9] 褚绍阳, 干勇, 仇圣桃, 项利, 田玉石, 石超. 高牌号无取向硅钢生产流程中织构控制研究现状[J]. 材料导报, 2024, 38(13): 23020235-9.
[10] 赵胜前, 游庆龙, 李京洲, 尹杰, 黄之懿. 改性聚酯纤维对机场水泥混凝土的增韧阻裂效果分析[J]. 材料导报, 2024, 38(13): 23030172-8.
[11] 朱子健, 胡鹏博, 冯驰. 多孔材料毛细滞后现象研究综述[J]. 材料导报, 2024, 38(12): 23030281-10.
[12] 肖雯心, 王叶, 马凯, 代朝能, 裴三略, 王丹芊, 王敬丰. 镁合金表面化学转化涂层研究进展[J]. 材料导报, 2024, 38(12): 23010121-12.
[13] 夏洋洋, 方宏远, 张超, 王翠霞, 石明生. 玻纤增强甲基丙烯酸酯基UV-CIPP材料抗弯性能及失效分析[J]. 材料导报, 2024, 38(12): 22060190-7.
[14] 龙武剑, 罗盛禹, 程博远, 冯甘霖, 李利孝. 机器学习算法用于自密实混凝土性能设计的研究进展[J]. 材料导报, 2024, 38(11): 22110224-10.
[15] 龙飞, 刘瞿, 朱艺星, 周梦然, 陈高强, 史清宇. 搅拌摩擦加工调控Mg-5Zn-0.6Zr合金耐蚀性的研究[J]. 材料导报, 2024, 38(10): 23020077-6.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed