铜镍合金的强韧化行为及其微观机制的研究进展

材料导报

2021, Vol. 35

Issue (z2): 372-375

金属与金属基复合材料

铜镍合金的强韧化行为及其微观机制的研究进展

金城焱¹, 杜兴蒿^1,2, 闫霏¹, 史传鑫¹, 盖业辉¹, 黄志青², 李万鹏², 武保林¹, 段国升¹, 王大鹏¹

1 沈阳航空航天大学材料科学与工程学院,沈阳 110136
2 香港城市大学材料科学与工程系,九龙 999077

Research Progress on Strengthening-Toughening Behavior and the Associated Mechanisms of Cu-Ni Alloys

JIN Chengyan¹, DU Xinghao^1,2, YAN Fei¹, SHI Chuanxin¹, GAI Yehui¹, HUANG Zhiqing², LI Wanpeng², WU Baolin¹, DUAN Guosheng¹, WANG Dapeng¹

1 School of Materials Science and Engineering, Shenyang Aerospace University, Shengyang 110136, China
2 Department of Materials Science and Engineering, City University of Hong Kong, Kowloon 999077, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 7593KB )
输出: BibTeX | EndNote (RIS)

摘要近年来,高性能铜镍合金因其具有优异的性能成为了研究热点。本文综述了一些高强韧铜镍合金的研究进展,重点对该系列铜镍合金的强韧化行为及其微观机制进行了讨论与分析。最后给出了高强韧铜镍合金特别是多主元高强铜镍合金的发展趋势。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	金城焱
	杜兴蒿
	闫霏
	史传鑫
	盖业辉
	黄志青
	李万鹏
	武保林
	段国升
	王大鹏

关键词: 高强铜镍合金结构材料强韧化机制多主元高熵合金

Abstract: In recent years, the research on the high-performance Cu-Ni alloys have become a focus due to their excellent properties. In this paper, recent research progress of some high-strength and toughened Cu-Ni alloys has been reviewed, with emphasis on discussion of the strengthening and toughening behavior and the associated mechanisms. Finally, the development trend of high -strength and toughened Cu-Ni alloys, especially multi-principal component high strength Cu-Ni alloy is given.

Key words: high strength Cu-Ni alloys structural material strengthening and toughening mechanism multi-principal component high entropy alloy

发布日期: 2021-12-09

ZTFLH:

TG139

基金资助: 辽宁省重点研发计划军民融合专题(JH2/10700006)

通讯作者: xhdu@sau.edu.cn

作者简介: 金城焱,2019年6月毕业于沈阳航空航天大学,获得工学学士学位。现为沈阳航空航天大学材料科学与工程学院硕士研究生,在杜兴蒿教授的指导下进行研究。目前主要研究领域为高性能高熵合金。
杜兴蒿,沈阳航空航天大学教授、硕士研究生导师。1990年西安交通大学本科毕业,2002年在哈尔滨工业大学获得工学博士学位。2017—2018在香港城市大学材料科学与工程学院担任研究员。作为骨干参与三项国家自然科学基金面上以及一项国家军委创新前沿项目的研究工作,目前主持一项辽宁省重点研发项目:超高强度xxx基三主元合金板材、棒材的制备工艺与开发研究。曾获得2006年度辽宁省自然科学二等奖以及2009年度辽宁省百千万人才千人层次称号。累计发表学术论文100余篇,Google统计被SCI收录80余篇,被引用1 851次,H因子23。获授权中国国家发明专利5项,美国专利1项。作为第一作者,最近在世界级顶刊自然杂志子刊Nature communications发表题为:“Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy”的学术论文。

引用本文:

金城焱, 杜兴蒿, 闫霏, 史传鑫, 盖业辉, 黄志青, 李万鹏, 武保林, 段国升, 王大鹏. 铜镍合金的强韧化行为及其微观机制的研究进展[J]. 材料导报, 2021, 35(z2): 372-375.
JIN Chengyan, DU Xinghao, YAN Fei, SHI Chuanxin, GAI Yehui, HUANG Zhiqing, LI Wanpeng, WU Baolin, DUAN Guosheng, WANG Dapeng. Research Progress on Strengthening-Toughening Behavior and the Associated Mechanisms of Cu-Ni Alloys. Materials Reports, 2021, 35(z2): 372-375.

链接本文:

http://www.mater-rep.com/CN/ 或 http://www.mater-rep.com/CN/Y2021/V35/Iz2/372

1 Brandes E A, Brook G B. Smithells metals reference book, Sixth Edition, Auburn University Press, USA, 1983.
2 Borough J W. Transactions of Metallurgical Society of the American Institute of Mining, 1961, 221, 1274.
3 Sun W H, Xu H H, Du Y, et al. Advanced Engineering Materials, 2009, 33(4), 642.
4 谢伟滨. 高强高弹Cu-20Ni-20Mn合金微观组织结构演变规律及其对性能的影响. 博士学位论文, 北京有色金属研究总院, 2016.
5 吴语. Cu-15Ni-10Mn合金组织性能研究. 硕士学位论文,江西理工大学, 2012.
6 Xie W B, Wang Q S, Xie G L, et al. International Journal of Minerals Metallurgy and Materials, 2016, 23(3), 323.
7 Rondot D, Mignot J. Acta Metallurgica, 1978, 26(2), 217.
8 Bobylev A V. Metal Science and Heat Treatment, 1962, 2(1), 49.
9 Miki M, Sogabe T, Hori S. Journal of the Japan Institute of Metals and Materials, 1982,46(3), 307.
10 潘奇汉. 金属热处理, 1985(3), 43.
11 何向华. Cu-Ni-Mn合金铸态时效特性研究. 硕士学位论文, 长安大学, 2003.
12 Xie W B, Wang Q S, Mi X J, et al. Transactions of Nonferrous Metals Society of China, 2015, 25(10), 3247.
13 蔡薇, 吴语, 王刚, 等. 铸造. 2014, 63(12), 1270.
14 王艳辉. Cu-15Ni-8Sn-XSi合金和Cu-9Ni-2.5Sn-1.5Al-0.5Si合金中的相变及其对合金性能的影响. 博士学位论文, 中南大学, 2004.
15 汪明朴, 贾延琳, 李周. 先进高强导电铜合金, 中南大学出版社, 2015.
16 Zhao J C, Notis M R. Acta Materialia, 1998, 46(12), 4203.
17 Ouyang Y, Gan X P, Li Z, et al.Materials Science & Engineering: A, 2017, 704, 128.
18 Zhang G M, Chen C, Wang X J, et al. International Journal of Advanced Manufacturing Technology, 2018, 96(9), 4223.
19 Gao M Q, Chen Z N, Kang H J, et al.Materials Science and Engineering: A, 2018, 715, 340.
20 Zhao C, Wang Z, Li D X, et al.International Journal of Plasticity, 2021, 138, 102926.
21 杨胜利, 谢伟滨. 上海有色金属, 2012, 33(1), 41.
22 Semboshi S, Sato S, et al. Materials Characterization, 2016, 115, 39.
23 雷前. 超高强CuNiSi系弹性导电铜合金制备及相关基础研究. 博士学位论文, 中南大学, 2014.
24 Lei Q, Li Z, Wang J, et al. Materials and Design, 2013, 51, 1104.
25 Cheng J Y, Tang B B, Yu F X, et al.Journal of Alloys and Compounds, 2014, 614,189.
26 Lockyer S A, Noble F W.Journal of Materials Science, 1994, 29(1), 218.
27 Lei Q, Xiao Z, Hu W P, et al. Materials Science & Engineering A, 2017, 697, 37.
28 Xiao X P, Yi Z Y, Chen T T, et al.Journal of Alloys and Compounds, 2016, 660,178.
29 Li Z, Pan Z Y, Zhao Y Y, et al. Journal of Materials Research, 2009, 24(6), 2123.
30 Zhang Y, Liu P, Tian B H, et al. Procedia Engineering, 2012, 27, 1789.
31 Huang J Z, Xiao Z, Dai J, et al.Materials Science and Engineering: A, 2019, 744, 754.
32 Li J, Huang G J, Mi X J, et al.Materials Science and Engineering: A, 2019, 766, 138390.
33 Krishna S C, Srinath J, Abhay K. J, et al.Journal of Materials Enginee-ring & Performance, 2013, 22(7), 2115.
34 Wu Y, Li Y, Lu J, et al.Materials Science and Engineering: A, 2019, 742, 501.
35 赵冬梅, 董企铭, 刘平, 等. 金属热处理学报, 2002(2), 20.
36 Zhao D M, Dong Q M, Liu P, et al.Materials Science & Engineering: A, 2003, 361(1), 93.
37 王艳辉, 汪明朴, 洪斌. 机械工程材料, 2003, 27(11), 15.
38 Srivastava V C, Schneider A, Uhlenwinkel V, et al.Journal of Materials Processing Technology, 2004, 147(2), 174.
49 徐翩, 尚文静, 姜业欣. 上海有色金属, 2011, 32(04), 182.
40 Varalakshmi S, Kamaraj M, Murty B S.Metallurgical & Materials Tran-sactions A, 2010, 41(10), 2703.
41 Moon J, Park J M, Bae J W, et al. Acta Materialia, 2020, 193, 71.
42 Qin G, Chen R R, Mao H H, et al.Acta Materialia, 2021, 208, 116763.
43 Wu X L, Zhu Y T.Materials Research Letters, 2017, 8(5), 527.
44 Hyung Keun Park, Kei Ameyama, Jongmyung Yoo, et al. Materials Research Letters, 2018, 6(5), 261.

[1]	付磊, 林莉, 罗云蓉, 谢文玲, 王清远, 李辉. 梯度纳米结构材料疲劳性能研究进展[J]. 材料导报, 2021, 35(3): 3114-3121.
[2]	靳柯, 卢晨阳, 豆艳坤, 贺新福, 杨文. 高熵合金辐照损伤的实验研究进展[J]. 材料导报, 2020, 34(17): 17018-17030.
[3]	徐玉平, 吕一鸣, 周海山, 罗广南. 核聚变堆包层结构材料研究进展及展望[J]. 材料导报, 2018, 32(17): 2897-2906.
[4]	贺毅强, 钱晨晨, 李俊杰, 周海生. 喷射沉积铝基复合材料再结晶控制与强韧化机制的研究现状^*[J]. 《材料导报》期刊社, 2017, 31(17): 90-97.

[1]	Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO₂/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2]	Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3]	Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4]	Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5]	Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6]	Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7]	Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8]	Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9]	Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10]	Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .

Viewed

Full text

Abstract

Cited

Shared

Discussed