Please wait a minute...
材料导报  2020, Vol. 34 Issue (Z2): 360-361    
  金属与金属基复合材料 |
TiZr3V6合金微观组织及吸氢物相转变
屈少杰, 李成军, 汤志强, 李斌东, 熊刚
江西省锅炉压力容器检验检测研究院,南昌 330029
Microstructure and Phase Transformation After Hydrogen Absorption of TiZr3V6 Alloy
QU Shaojie, LI Chengjun, TANG Zhiqiang, LI Bindong, XIONG Gang
Institute of Jiangxi Boiler and Pressure Vessel Inspection and Testing, Nanchang 330029, China
下载:  全 文 ( PDF ) ( 3260KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 利用等离子体电弧熔炼技术制备TiZr3V6合金材料。采用SEM、EDS、XRD等分析手段,研究了TiZr3V6的微观组织及相组成。结果表明:TiZr3V6合金是由树枝状V基固溶体相、ZrV2相和α-Zr相组成,合金吸氢饱和后由V16Zr8H36.29、VH2.01和ZrH1.801三种氢化物相组成,并粉化成颗粒状,颗粒表面存在大量的微裂纹。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
屈少杰
李成军
汤志强
李斌东
熊刚
关键词:  吸气剂  Ti-Zr-V合金  微观组织  相组成    
Abstract: TiZr3V6 alloy was prepared by plasma arc melting technique. The microstructure and phase composition of TiZr3V6 alloy were studied by scanning electron microscope, energy spectrum analysis, X-ray diffraction analysis. The results show that TiZr3V6 alloy was composed of dendritic V based solid solution phase, ZrV2 phase and α-Zr phase. After hydrogen absorption saturation, the alloy was composed of V16Zr8H36.29 phase, VH2.01 phase and ZrH1.801 phase, and powdered into particles that existed a large number of micro-cracks.
Key words:  getter    Ti-Zr-V alloy    microstructure    phase composition
               出版日期:  2020-11-25      发布日期:  2021-01-08
ZTFLH:  TG139.7  
通讯作者:  qusj6159153@163.com   
作者简介:  屈少杰,2016年3月毕业于北京科技大学,获得硕士学位。同年加入江西省锅炉压力容器检验检测研究院工作至今,主要从事锅炉压力容器检验研究工作。李成军,高级工程师,现任职江西省锅炉压力容器检验检测研究院副院长,主要从事锅炉压力容器检验研究工作。
引用本文:    
屈少杰, 李成军, 汤志强, 李斌东, 熊刚. TiZr3V6合金微观组织及吸氢物相转变[J]. 材料导报, 2020, 34(Z2): 360-361.
QU Shaojie, LI Chengjun, TANG Zhiqiang, LI Bindong, XIONG Gang. Microstructure and Phase Transformation After Hydrogen Absorption of TiZr3V6 Alloy. Materials Reports, 2020, 34(Z2): 360-361.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2020/V34/IZ2/360
1 Zhang Y, Wei X Y, Mao C H,et al. Journal of Alloys and Compounds,2009,485,200.
2 Marenco N, Allegato G, Konstner H, et al. DAVID final activity report.Germany:ISIT,IST-027240,2009.
3 Benvenuti C, Chiggiato P, Cicoira F, et al.Journal of Vacuum Science & Technology A, 1998, 16(1),148.
4 Tominetti S, Amiotti M.Proceedings of the IEEE, 2002,90(4),540.
5 万玉金.吸气剂,江苏科学技术出版社,1983.
6 Chiggiato P, Pinto P C.Thin Solid Films, 2006, 515(2),382.
7 Benvenuti C, Cazeneuve J M, Chiggiato P, et al.Vacuum, 1999, 53,219.
8 Benvenuti C, Chiggiato P, Cicoira F, et al.Vacuum,1998,50,57.
9 Prodromides A E, Scheuerlein C, Taborelli M.Vacuum,2001,60,35.
10 Benvenuti C, Chiggiato P, Pinto P C,et al.Vacuum,2001,60,57.
11 Klein B, Redeker A, Züchner H.International Journal of Research in Physical Chemistry and Chemical Physics, 1993, 181(1),95.
12 Hsu Y S, Perng T P. Journal of Alloys and Compounds,1995,227(2), 180.
13 Jain Ankur, Jain R K, Agarwal Shivani, et al.International Journal of Hydrogen Energy, 2007, 32, 2445.
[1] 许爱平, 侯继军, 董俊慧. 稀土活性剂对TC4钛合金激光焊焊接接头的影响[J]. 材料导报, 2020, 34(Z2): 348-350.
[2] 赵惠. 成型工艺对钨基复合材料界面组织和性能的影响[J]. 材料导报, 2020, 34(Z2): 351-355.
[3] 秦笑, 王娟, 林高用, 郑开宏, 王海艳, 冯晓伟. 镀铜石墨/铜复合材料的组织和摩擦磨损性能[J]. 材料导报, 2020, 34(Z1): 380-384.
[4] 刘钊扬, 熊柏青, 张永安, 李志辉, 李锡武, 闫丽珍, 温凯. 汽车车身板用6A16铝合金拉深成形金属流动和微观组织相关性研究[J]. 材料导报, 2020, 34(8): 8119-8125.
[5] 张松, 杨静, 胥永刚, 张明月. 仿SIMA法钎焊对Mn-Cu合金与430不锈钢接头组织及性能的影响[J]. 材料导报, 2020, 34(8): 8126-8130.
[6] 信思树, 王镇华, 李春玲, 王清. 体心立方BCC基多元合金中的共格析出及强化[J]. 材料导报, 2020, 34(7): 7130-7137.
[7] 蔺宏涛, 孟强, 王怡嵩, 王家毅, 张韵, 江海涛. 旋转速度对高强度钢Q&P980搅拌摩擦焊接头组织与性能的影响[J]. 材料导报, 2020, 34(6): 6126-6131.
[8] 陈健, 周莉, 刘金洋, 吉红伟, 杨勇, 刘伟, 邓欣, 伍尚华. 真空和渗氮烧结WC-TiC-Co硬质合金的梯度结构形成机理研究[J]. 材料导报, 2020, 34(4): 4077-4082.
[9] 王向杰, 冯蕾, 武靖亭, 肖新华, 苏蓓蓓. 搅拌摩擦焊接ZK60镁合金弯曲性能与断裂行为研究[J]. 材料导报, 2020, 34(4): 4083-4086.
[10] 刘轩之,顾开选 ,翁泽钜,王凯凯,崔晨,郭嘉,王俊杰. 铝合金深冷处理研究进展[J]. 材料导报, 2020, 34(3): 3172-3177.
[11] 张俊喜, 易湘斌, 沈建成, 陈百明, 李保栋, 徐创文. 固溶和工作温度对TC21钛合金动态压缩性能和绝热剪切敏感性的影响[J]. 材料导报, 2020, 34(24): 24092-24096.
[12] 王子伊, 薛松柏, 王剑豪, 刘晗, 温丽. 添加合金元素改善Au-Ge钎料组织及性能的研究进展[J]. 材料导报, 2020, 34(23): 23145-23153.
[13] 谢锐, 吕铮, 徐长伟, 刘春明. 钛元素对9Cr氧化物弥散强化钢微观组织和拉伸性能的影响[J]. 材料导报, 2020, 34(22): 22111-22117.
[14] 王柏宁, 王峰, 王志, 周乐, 毛萍丽, 刘正. 铸态与挤压态AM50-4%(Zn,Y)合金组织及力学性能[J]. 材料导报, 2020, 34(20): 20076-20080.
[15] 刘浩东, 喻辉, 戴京涛, 崔爱永, 魏华凯, 赵培仲, 卢长亮. 非真空激光定向凝固参数对DZ22合金熔覆层组织的影响[J]. 材料导报, 2020, 34(20): 20091-20095.
[1] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[2] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[3] GUO Hongjian, JIA Junhong, ZHANG Zhenyu, LIANG Bunu, CHEN Wenyuan, LI Bo, WANG Jianyi. Microstructure and Tribological Properties of VN/Ag Films Fabricated by Pulsed Laser Deposition Technique[J]. Materials Reports, 2017, 31(2): 55 -59 .
[4] WANG Wenjin, WANG Keqiang, YE Shenjie, MIAO Weijun, CHEN Zhongren. Effect of Asymmetric Block Copolymer of PI-b-PB on Phase Morphology and Properties of IR/BR Blends[J]. Materials Reports, 2017, 31(2): 96 -100 .
[5] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[6] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
[7] ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[8] YAN Zhilong, LI Yongsheng, HU Kai, ZHOU Xiaorong. Progress of Study on Phase Decomposition of Duplex Stainless Steel[J]. Materials Reports, 2017, 31(15): 75 -80 .
[9] SHI Yu, ZHOU Xianglong, ZHU Ming, GU Yufen, FAN Ding. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint[J]. Materials Reports, 2017, 31(10): 61 .
[10] DONG Fei,YI Youping,HUANG Shiquan,ZHANG Yuxun,. TTT Curves and Quench Sensitivity of 2A14 Aluminum Alloy[J]. Materials Reports, 2017, 31(10): 77 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed