Please wait a minute...
材料导报  2020, Vol. 34 Issue (Z2): 1-5    
  无机非金属及其复合材料 |
氢燃料电池关键材料发展现状及研究进展
宋显珠, 郑明月, 肖劲松, 张镇
工业和信息化部赛迪研究院材料工业研究所,北京 100846
Research Progress on Development Status and Trend of Key Materials of Hydrogen Fuel Cells
SONG Xianzhu, ZHENG Mingyue, XIAO Jinsong, ZHANG Zhen
China Center for Information Industry Development,Beijing 100846, China
下载:  全 文 ( PDF ) ( 2216KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 氢燃料电池具有高运行效率、高安全系数和高稳定性的特点,对其关键材料的各项性能指标有很高的要求。本文通过对比研究的方法,从氢燃料电池关键材料的性能要求、技术发展和国内外相关重点企业的三个维度进行研究,分析我国氢燃料电池关键材料发展现状及存在的问题。研究表明,我国相关产业的关键核心技术成熟度低,对国外技术与产品依赖度高,严重滞后于美国、日本、欧盟等发达国家和地区。为保证相关领域产业链的安全和关键技术自主可控,本文建议政府和企业提前做好资金、政策和人才布局,健全产业链,实现关键核心材料国产化,保障我国氢燃料电池产业快速健康发展。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
宋显珠
郑明月
肖劲松
张镇
关键词:  氢燃料电池关键材料  性能要求  重点企业对比  产业链安全    
Abstract: The performance of key materials for hydrogen fuel cells is highly demanding. The method of comparative study was used in this study. The three dimensions of performance requirements, technology development and related key enterprises at home and abroad have been compared and studied for key materials of hydrogen fuel cells.Finally, the development status and existing problems of key materials for hydrogen fuel cells in China are analyzed in detail. Research shows that the key core technologies of related industries in China have low maturity and high dependence on foreign technology and products. China's related industries are seriously lagging behind developed countries and regions such as the United States, Japan and the European Union. A series of recommendations have been put forward to ensure the safety of the industrial chain in related fields and the controllability of key technologies. This study suggests that the government and enterprises should do a good job of capital, policy and talent layout in advance, improve the industrial chain, realize the localization of key core materials, and ensure the rapid and healthy development of China's hydrogen fuel cell industry.
Key words:  key materials for hydrogen fuel cells    performance requirements    comparison of key enterprises    industry chain security
               出版日期:  2020-11-25      发布日期:  2021-01-08
ZTFLH:  TM911.4  
基金资助: 国家新材料产业资源共享平台(TC180A6NJ)
通讯作者:  13051509028@163.com   
作者简介:  宋显珠,工业和信息化部赛迪研究院党委书记,教授级高级工工程师、高级政工师。2010年12月任工信部原材料工业司副司长(正司级)。2012.03任中国电子信息产业发展研究院党委书记。曾被青海省委党校聘为特邀教授、青海大学财经学院聘为客座教授;曾被聘为中国职工思想政治工作研究会理事;曾荣获青海省劳动模范、全国企业优秀思想政治工作者、全国化工优秀政工干部称号。郑明月,工业和信息化部赛迪研究院高级工程师。2015年9月至2019年6月,在北京科技大学获得材料科学与工程专业工学博士学位。以第一作者在国内外学术期刊上发表论文30余篇,申请国家发明专利4项,授权4项。同时,获得中国有色金属工业科学技术一等奖、中国材料大会优秀报告奖、北京有色金属研究总院院长奖学金、北京科技大学优秀博士论文提名奖;并担任多个学术期刊的审稿人。研究工作主要围绕新材料产业规划及战略研究;钢铁、有色金属材料、稀土材料、环保材料、新能源材料、建材、化工材料的产业研究等。
引用本文:    
宋显珠, 郑明月, 肖劲松, 张镇. 氢燃料电池关键材料发展现状及研究进展[J]. 材料导报, 2020, 34(Z2): 1-5.
SONG Xianzhu, ZHENG Mingyue, XIAO Jinsong, ZHANG Zhen. Research Progress on Development Status and Trend of Key Materials of Hydrogen Fuel Cells. Materials Reports, 2020, 34(Z2): 1-5.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2020/V34/IZ2/1
1 赵奥,左莉,武春友.科技管理研究,2019(9),248.
2 李健,王广策.海洋科学, 2011, 35(7),122.
3 邵志刚,衣宝廉.中国科学院院刊, 2019, 34(4),95.
4 陈柳钦.时代汽车, 2011(9),35.
5 张丽彬,陈晓宁,吴文健,等.农业工程技术(新能源产业), 2011(4),19.
6 刘志祥,钱伟,郭建伟,等.化学进展, 2011, 23(2),487.
7 房鑫.质子交换膜燃料电池发电系统建模及仿真研究.硕士学位论文,青岛大学,2018.
8 Choi W, Enjeti P N, Howze J W. Applied Power Electronics Conference and Exposition-APEC, 2016, 43(2),67.
9 Katsuji S, Yoshitaka M, Toshiyuki I, et al.IEEE Transactions on Power Electronics, 2015,31(2),1692.
10 侯明,衣宝廉.科技导报, 2016, 34(6),52.
11 Liu F, Yi B, Xing D, et al. Journal of Membrane Science, 2003, 212(1), 213.
12 Xing D M, Yi B L, Liu F Q, et al. Fuel Cells, 2005, 5(3), 406.
13 http://www.paper.edu.cn/releasepaper/content/201101-86.
14 Wang D, Xin H L, Hovden R, et al. Nature Materials, 2013, 12(1),81.
15 李静,冯欣,魏子栋.电化学, 2018, 24(6),22.
16 康启平,张国强,张志芸,等.电源技术, 2019, 43(4),179.
17 Markötter H, Haussmann J, Alink R, et al. Electrochemistry Communications, 2013, 34, 22.
18 张智明,胡淞,李昆朋,等.湖南大学学报(自然科学版), 2018, 45(10),35.
19 杨雁晖,柳丽君,郝建强.粘接, 2007, 28(2),46.
[1] 李凯, 高文明, 杜莹, 李箭. 直接CH4固体氧化物燃料电池金属支撑体研究现状与发展[J]. 材料导报, 2020, 34(17): 17149-17154.
[2] 李文龙, 薛屏. 微生物燃料电池分隔材料的研究新进展[J]. 《材料导报》期刊社, 2018, 32(7): 1065-1072.
[3] 周嵬, 王习习, 朱印龙, 戴洁, 朱艳萍, 邵宗平. 面向金属-空气电池和中低温固体氧化物燃料电池应用的钴基电催化剂综述[J]. 材料导报, 2018, 32(3): 337-356.
[4] 夏艺萌, 吴帅, 谭丰, 李卫, 魏清茂, 闵春刚, 杨喜昆. 钴盐阴离子基团对Co-N-C催化剂电催化活性的影响[J]. 《材料导报》期刊社, 2018, 32(3): 362-367.
[5] 吕路强, 沈骏, 向路, 刘双翼, 谢雄, 周猛兵. 碳基纳米结构作为燃料电池催化剂载体的研究进展*[J]. 材料导报, 2017, 31(21): 9-18.
[6] 蔡超, 陈亚男, 傅凯林, 潘牧. 质子交换膜燃料电池中Pt/C及Pt合金/C催化剂的衰退机制研究综述[J]. 《材料导报》期刊社, 2017, 31(17): 20-26.
[7] 卢云, 王伟, 宫岩坤, 沈逸欣, 冯孟杰. 二甲基亚砜对有机电解液锂空气电池性能的影响*[J]. 《材料导报》期刊社, 2017, 31(12): 1-5.
[8] 董奇志, 万汉生, 曾文霞, 余淑敏, 郭灿城, 余刚. 改性碳纳米材料在低温燃料电池中的应用*[J]. CLDB, 2017, 31(9): 81-89.
[9] 陈海辉, 郭秀艳, 曾莹莹, 马国金. 质子交换膜燃料电池水管理动态模型研究*[J]. 《材料导报》期刊社, 2017, 31(5): 23-28.
[10] 汪广进, 程凡, 徐甜, 余意, 文胜, 龚春丽, 刘海, 汪杰, 郑根稳, 潘牧. 二次烧结气氛对La0.7Sr0.3MnO3氧还原催化活性的影响*[J]. 《材料导报》期刊社, 2017, 31(2): 33-36.
[11] 郜雪松, 罗 锋, 杨叶华, 龚兴厚, 胡 涛, 吴崇刚. 杂多酸掺杂质子交换膜的制备、结构及性能[J]. 材料导报, 2017, 31(1): 30-42.
[12] 吴晓燕, 谭维, 罗才武, 张晓文, 李密, 房琦, 谭文发. 以MnFe2O4为阻挡层的Ni-YSZ阳极支撑SOFC的效能[J]. 材料导报, 2019, 33(12): 1949-1954.
[1] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[2] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[3] GUO Hongjian, JIA Junhong, ZHANG Zhenyu, LIANG Bunu, CHEN Wenyuan, LI Bo, WANG Jianyi. Microstructure and Tribological Properties of VN/Ag Films Fabricated by Pulsed Laser Deposition Technique[J]. Materials Reports, 2017, 31(2): 55 -59 .
[4] WANG Wenjin, WANG Keqiang, YE Shenjie, MIAO Weijun, CHEN Zhongren. Effect of Asymmetric Block Copolymer of PI-b-PB on Phase Morphology and Properties of IR/BR Blends[J]. Materials Reports, 2017, 31(2): 96 -100 .
[5] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[6] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
[7] ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[8] YAN Zhilong, LI Yongsheng, HU Kai, ZHOU Xiaorong. Progress of Study on Phase Decomposition of Duplex Stainless Steel[J]. Materials Reports, 2017, 31(15): 75 -80 .
[9] SHI Yu, ZHOU Xianglong, ZHU Ming, GU Yufen, FAN Ding. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint[J]. Materials Reports, 2017, 31(10): 61 .
[10] DONG Fei,YI Youping,HUANG Shiquan,ZHANG Yuxun,. TTT Curves and Quench Sensitivity of 2A14 Aluminum Alloy[J]. Materials Reports, 2017, 31(10): 77 -81 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed