Sintering Aids for Silicon Carbide Ceramics: Action Mechanisms and Research Progress
FU Zhendong1, ZHAO Jian2, DAI Yejing3, LIANG Ji1, LIU Rongzheng2
1 Key Laboratory for Advanced Ceramics and Machining Technology of the Ministry of Education, School of Materials Science and Engineering,Tianjin University, Tianjin 300072, China 2 Institute of Nuclear and New Energy Technology, Tsinghua University,Beijing 100084, China 3 School of Materials, Sun Yat-sen University, Guangzhou 510275, China
Abstract: Silicon carbide (SiC) ceramics are widely used in petrochemical, aerospace and heat exchangers owing to its excellent properties, such as high strength, high hardness and excellent resistance to oxidation, corrosion and thermal shock. In addition, SiC is also considered to be a structural component of future fission and fusion reactors because of its low activation under neutron irradiation conditions. However, pure dense SiC ceramics can only be obtained by sintering at high temperature with high pressure due to the high covalent bonding of Si-C bonds and low self-diffusion. In order to promote the densification of SiC and to alleviate the sintering conditions, the addition of sintering aids is crucial. In this paper, the thermodynamic conditions by adding sintering aids are discussed and the mechanisms of sintering aids to promoting SiC densification under different sintering conditions are summarized. The classification and the research progress of sintering aids for SiC ceramics in recent years are introduced. Future prospects of the research and development trend of the densification SiC ceramics are proposed.
付振东, 赵健, 戴叶婧, 梁骥, 刘荣正. 碳化硅陶瓷烧结助剂的作用机制与研究进展[J]. 材料导报, 2021, 35(1): 1077-1081.
FU Zhendong, ZHAO Jian, DAI Yejing, LIANG Ji, LIU Rongzheng. Sintering Aids for Silicon Carbide Ceramics: Action Mechanisms and Research Progress. Materials Reports, 2021, 35(1): 1077-1081.
1 Noviyanto A, Yoon D H. Current Applied Physics,2013,13(1),287. 2 Noviyanto A, Han S W, Yu H W, et al. Journal of the European Ceramic Society,2013,33(15-16),2915. 3 She J H, Ueno K. Materials Research Bulletin,1999,34(10-11),1629. 4 Huang Z H, Jia D C, Yang Z H, et al. Materials Science & Technology,2004,12(1),103(in Chinese). 黄智恒,贾德昌,杨治华,等.材料科学与工艺,2004,12(1),103. 5 Li A. Effects of rare earth fluorides/oxide additives on the thermal conductivity of silicon carbide ceramic. Master's Thesis, Huazhong University of Science & Technology, China,2017(in Chinese). 李安.稀土氟化物/氧化物烧结助剂对碳化硅陶瓷热导率的影响.硕士学位论文,华中科技大学,2017. 6 Wang J, Zhang Y J, Gong H Y. Ceramics,2008(4),17(in Chinese). 王静,张玉军,龚红宇.陶瓷,2008(4),17. 7 Wu W B, Jin Z G. Shandong Ceramics,2002,25(1),14(in Chinese). 武卫兵,靳正国.山东陶瓷,2002,25(1),14. 8 Chen Y H, Han F L, Wu L E. Ningxia Engineering Technology,2002,1(1),32(in Chinese). 陈宇红,韩凤兰,吴澜尔.宁夏工程技术,2002,1(1),32. 9 Raju K, Yoon D H. Ceramics International,2016,42(16),17947. 10 You Z, Tanaka H, Otani S, et al. Journal of the American Chemical So-ciety,2010,82(8),1959. 11 Cooper A R, Heuer A H. Mass Transport Phenomena in Ceramics, Sprin-ger US,1975. 12 Chen W, Cao L Z, Zhang X J, et al. Ordnance Material Science and Engineering,2004,27(5),35(in Chinese). 陈巍,曹连忠,张向军,等.兵器材料科学与工程,2004,27(5),35. 13 Li J, Wu C D, Miao L. Jiangsu Ceramics,2001,34(1),4(in Chinese). 李江,吴春冬,苗林.江苏陶瓷,2001,34(1),4. 14 Bahaaddini M, Baharvandi H R, Ehsani N, et al. Ceramics International,2019,45(10),13536. 15 Cao J J, Moberlychan W J, Jonghe L C D, et al. Journal of The American Chemical Society,2010,79(2),461. 16 Liu G W, Muolo M L, Valenza F, et al. Ceramics International,2010,36(4),1177. 17 Omori M, Takei H. Journal of Materials Science,1988,23(10),3744. 18 Ribeiro S, Ribeiro G C, Oliveira M R D. Materials Research,2015,18(3),525. 19 Sciti D, Bellosi A. Journal of Materials Science,2000,35(15),3849. 20 Kim H M, Kim Y W. Journal of the Ceramic Society of Japan,2019,127(4),207. 21 Li A, Fan G F, Shi Y S, et al. Journal of Synthetic Crystals,2018,47(1),25(in Chinese). 李安,范桂芬,史玉升,等.人工晶体学报,2018,47(1),25. 22 Zhou Y, Hirao K, Yamauchi Y, et al. Journal of Materials Research,2003,18(8),1854. 23 Kim Y W, Lim K Y, Seo W S, et al. Journal of the American Ceramic Society,2014,97(3),923. 24 Liang H, Yao X, Huang Z, et al. Journal of the European Ceramic Society,2016,36(8),1863. 25 Kim J Y, Iseki T, Yano T. Journal of the American Ceramic Society,1996,79(10),2744. 26 Huang Z H, Jia D C, Zhou Y, et al. Ceramics International,2003,29(1),13. 27 Huang Z H, Jia D C, Zhou Y, et al. Materials Research Bulletin,2002,37(5),933. 28 Ortiz A L, Borrero-López O, Quadir M Z, et al. Journal of the European Ceramic Society,2012,32(4),965. 29 Borrero-López O, Ortiz A L, Ciudad E, et al. Ceramics International,2012,38(7),5979. 30 Sharma A S, Fitriani P, Yoon D H. Ceramics International,2016,42(7),8713. 31 Zhou S M, Yu C, Zhu H X, et al. Materials for Mechanical Engineering,2015,39(2),45(in Chinese). 周诗民,余超,祝洪喜,等.机械工程材料,2015,39(2),45. 32 Lee J S, Ahn Y S, Nishimura T, et al. Journal of the European Ceramic Society,2012,32(3),619. 33 Yang Y X, Liu Z M, Deng X Y, et al. Bulletin of The Chinese Ceramic Society,2015,34(8),2315(in Chinese). 杨仪潇,刘张敏,邓湘云,等.硅酸盐通报,2015,34(8),2315.