Please wait a minute...
材料导报  2022, Vol. 36 Issue (Z1): 22040180-4    
  金属与金属基复合材料 |
控制棒驱动机构耐压壳钩爪段用马氏体不锈钢研究
何翠竹
中广核工程有限公司核电安全监控技术与装备国家重点实验室,广东 深圳 518172
Research on Martensitic Stainless Steel Used on the Latch Housing of Control Rod Drive Mechanism
HE Cuizhu
State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment, China Nuclear Power Engineering Co., Ltd., Shenzhen 518172, Guangdong, China
下载:  全 文 ( PDF ) ( 3810KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本研究以设计规范为基础,参考国际相关制造经验,并结合工程实际,制定了控制棒驱动机构(CRDM)耐压壳钩爪段用X3CrNiMo13-4马氏体不锈钢的制造工艺和关键参数,成功制备出了满足设计要求的耐压壳用马氏体不锈钢。试验结果表明,材料的综合性能(如屈强比和磁性能)有所提升,相关指标达到国际领先水平。EPR CRDM耐压壳钩爪段用马氏体钢的成功研制为国内外核电项目建设提供有力的技术保障。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
何翠竹
关键词:  控制棒驱动机构  耐压壳钩爪段  马氏体不锈钢  制造工艺研究    
Abstract: Based on the design specification, this research refers to the relevant international manufacturing experience and combines the current manu-facture with engineering practice. The manufacturing process and key parameters of the material for control rod drive mechanism(CRDM) latching housing are established. The martensitic stainless steel which meets the design requirements has been successfully prepared based on a series of process exploration and experimental research. Test results show that the comprehensive properties (such as yield ratio and magnetic properties) of the material are improved as well. The performance indicators have reached the international advanced level. The successful deve-lopment of the martensitic steel for European pressurized reactor (EPR) CRDM latch housing provides powerful technical support for the construction of nuclear power projects at home and abroad.
Key words:  control rod drive mechanism    latch housing part of the pressure housing    martensite stainless steel    manufacturing process research
出版日期:  2022-06-05      发布日期:  2022-06-08
ZTFLH:  TL351.5  
通讯作者:  269528929@qq.com   
作者简介:  何翠竹,2011年6月、2014年6月分别于山东大学获得材料化学理学学士学位和材料工程硕士学位。现为中广核工程有限公司核电安全监控技术与装备国家重点实验室核岛设备所主设备材料设计师。目前主要研究领域为核电厂控制棒驱动机构、乏燃料贮运容器、蒸汽发生器、涂料等设备制造和材料研究。
引用本文:    
何翠竹. 控制棒驱动机构耐压壳钩爪段用马氏体不锈钢研究[J]. 材料导报, 2022, 36(Z1): 22040180-4.
HE Cuizhu. Research on Martensitic Stainless Steel Used on the Latch Housing of Control Rod Drive Mechanism. Materials Reports, 2022, 36(Z1): 22040180-4.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2022/V36/IZ1/22040180
1 广东核电培训中心.900 MW压水堆核电站系统与设备. 原子能出版社,2005, pp. 70.
2 喻杰. 科技创新导报, 2017,14(22),83.
3 兰银辉,孙广, 尤磊等. 热处理技术与装备,2013,34(4), 12.
4 李红英. 核动力工程, 2003(S1),161.
5 杨平汉. 装备机械, 2014(2),20.
6 BS EN 10272, Standards Policy and Strategy Committee, 2007.
7 RCC-M M 3204, AFCEN, 2017.
8 Niderau H J. In: 119th General Session of the Materials Committee of VDEh. Dusseldorf, Germany, 1977, pp. 01.
9 Heimann N. Storm Eigenschaften and Gefuge Einiger Weichmartensiticcher Nichtrostender Chrom-Nickel-(Molybdan-) Stahle. Thyssen Edelstahi Technische Berichte, 1982, 2, 115.
10 Kastner N. VdTOV Material Sheet, SIMENS, Germany, 1995, 395, 3.
11 许小虎, 郭旸, 尚延涛, 等. 热加工工艺, 2019, 48(10), 47.
12 尚延涛, 李凯驰, 许小虎, 等. 热加工工艺, 2019, 48(8), 59.
[1] 沈天阔. 控制棒驱动机构可拆接头用X12CrNi13马氏体不锈钢冲击失效分析及改进[J]. 材料导报, 2021, 35(z2): 404-409.
[2] 朱兵钺, 林健, 雷永平, 符寒光, 张永强, 程四华. 410马氏体不锈钢块体材料的冷金属过渡焊电弧增材制造与性能表征[J]. 材料导报, 2021, 35(14): 14150-14155.
[3] 魏乔苑, 李跃忠, 赵毛毛, 冉小兵. 水环境对控制棒驱动机构Ω焊缝母材应力腐蚀的影响[J]. 材料导报, 2020, 34(Z1): 462-465.
[4] 沈天阔, 邹小平, 刘鸣宇, 吕亮, 朱旭. 核电站控制棒驱动机构(CRDM)钩爪国产化研究[J]. 材料导报, 2019, 33(Z2): 480-483.
[5] 靳军, 孙俊生, 孙洪根, 卢庆亮, 许京伟, 杨云. 热作模具表面氮合金化堆焊金属的组织和性能[J]. 材料导报, 2019, 33(19): 3184-3188.
[1] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4] Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5] Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6] Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7] Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8] Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9] Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10] Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed