Preparation and Characterization of Martensitic Stainless Steel 410 Block Parts by CMT Wire Arc Additive Manufacturing
ZHU Bingyue1, LIN Jian1,*, LEI Yongping1, FU Hanguang1, ZHANG Yongqiang2, CHENG Sihua2
1 College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China 2 Shougang Research Institute of Technology, Beijing 100043, China
Abstract: Wire arc additive manufacturing (WAAM) has unique advantages of high efficiency, low cost and no limitation of forming size, showing application prospects in the field of novel manufacturing and repair. Obtaining WAAM parts with good mechanical properties and uniform microstructure is the problem that needs to be solved urgently. In this study, two kinds of martensitic stainless steel 410 (SS 410) block parts were prepared by wire and arc additive manufacturing system based on cold metal transfer (CMT). The results of optical microscope (OM), scanning electron microscope (SEM) and mechanical properties test showed that the as-deposited parts with uniform microstructure, average hardness of 530HV, average tensile strength of 1 196 MPa and uniform elongation can be obtained. The mechanical properties of as-deposited parts were discussed, and compared with wrought and laser additive manufacturing H13 hot work die steel. This work analyzed reasons for the difference between the properties of WAAM parts and forgings, examined the feasibility of using as-deposited stainless steel 410 in repairing, and explained the ways to improving mechanical properties of WAAM parts.
1 Li M X, Zhang T, Yu F, et al. Aeronautical Manufacturing Technology, 2019, 62(17), 55 (in Chinese). 李明祥, 张涛, 于飞, 等. 航空制造技术, 2019, 62(17), 55. 2 Huang Y J, Liu J H, Yang J H, et al. China Metallurgy, 2019, 29(11), 6(in Chinese). 黄永建, 刘军会, 杨进航, 等. 中国冶金, 2019, 29(11), 6. 3 Guan Q. Welding & Joining, 2014(5), 1(in Chinese). 关桥. 焊接, 2014(5), 1. 4 Han T Y, Kuo C H, Sridharan N, et al. Materials Science & Engineering A, 2020, 769, 2. 5 Shen H Y, Chen H B. Journal of Shanghai Jiaotong University, 2016, 50(S1), 114(in Chinese). 沈鸿源, 陈华斌. 上海交通大学学报, 2016, 50(S1), 114. 6 Zhang J S, Xiao G Q, Deng C Y. Forging & Stamping Technology, 2020(7), 165(in Chinese). 张建生, 肖贵乾, 邓长勇. 锻压技术, 2020(7), 165. 7 Guo Z L, Lasne P, Saunders N, et al. Procedia Manufacturing, 2018,15, 372. 8 Ge J G, Lin J, Lei Y P, et al. Materials Science & Engineering A, 2018,715, 144. 9 Yan J J, Song H, Dong Y P, et al. Materials Science & Engineering A, 2020,773, 138845. 10 Yan K, Chen C J, Zhang M, et al. China Surface Engineering, 2017, 30(2), 134(in Chinese). 严凯, 陈长军, 张敏, 等. 中国表面工程, 2017, 30(2), 134. 11 Zhang J X, Huang J F, Wang H B, et al. Acta Metallurgica Sinica, 2014, 50(7), 787 (in Chinese). 张金祥, 黄进峰, 王和斌, 等. 金属学报, 2014, 50(7), 787. 12 Pei Y K, Ma D S, Liu B S, et al. Iron & Steel, 2012, 47(2), 81(in Chinese). 裴悦凯,马党参,刘宝石, 等. 钢铁, 2012, 47(2), 81. 13 Wang T T, Zhang Y B, Wu Z H, et al. Vacuum, 2018,149, 185. 14 Seluck C. Powder Metallurgy, 2013, 54(2), 94. 15 Lin P, Ma D S, Chi H X, et al. Materials for Mechanical Engineering, 2017, 41(Z2),1(in Chinese). 林鹏, 马党参, 迟宏宵, 等. 机械工程材料, 2017, 41(Z2),1. 16 Zheng D L. Fabrication of H13 steel by selective laser melting and resi-dual stress analysis. Master's Thesis, Harbin Institute of Technology, China, 2016(in Chinese). 郑东来. H13钢的选择性激光熔化制备及残余应力分析. 硕士学位论文, 哈尔滨工业大学, 2016. 17 Džugan J, Halmešová K, Ackermann M,et al. Thermochimica Acta, 2020,683, 178479. 18 Huang J F, Cai Y L, Yu Y P, et al. Acta Scientiarum Naturalium Universitatis Pekinensis, 2011, 33(1), 28(in Chinese). 黄进峰, 蔡玉丽, 于一鹏, 等. 北京科技大学学报, 2011, 33(1), 28. 19 Zhao L, Wei S T, Wu D, et al. Journal of Materials Science & Technology, 2020, 57, 33. 20 Yang K, Liang Y, Yan W, et al. Acta Metallurgica Sinica, 2020, 56(1), 53(in Chinese). 杨柯, 梁烨, 严伟, 等. 金属学报, 2020, 56(1), 53. 21 Sun X. Electric Welding Machine, 2019, 49(8), 14(in Chinese). 孙咸. 电焊机, 2019, 49(8), 14. 22 Li Q, Zhao G R, Ma W Y, et al. Materials Reports B:Research Papers, 2020, 34(2), 4073(in Chinese). 李卿, 赵国瑞, 马文有, 等. 材料导报:研究篇, 2020, 34(2), 4073. 23 Wang W Q, Li Y Q, Li X, et al. Materials Reports B:Research Papers, 2020, 34(1), 2077(in Chinese). 王文权, 李雅倩, 李欣, 等. 材料导报:研究篇, 2020, 34(1), 2077. 24 Liu Y B, Jin P, Wang J F, et al. Aeronautical Manufacturing Technology, 2019, 62(Z1), 58(in Chinese). 刘一搏, 靳鹏, 王建峰, 等. 航空制造技术, 2019, 62(Z1), 58. 25 Åsberg M, Fredriksson G, Hatami S, et al. Materials Science & Engineering A, 2018, 742, 584. 26 Wołosz P, Baran A, Polański M. Journal of Alloys and Compounds, 2020,823, 153840.
渝公网安备50019002502923号 版权所有：《材料导报》编辑部
2021, Vol. 35 
