Abstract: Multilayer ceramic capacitor (MLCC)is one of the most important passive components. As the application of MLCC has been extended to many fields, MLCC is required to have stable performance at high working temperature as well as in a wide temperature range. So temperature-stable MLCC dielectrics are urgently needed. BaTiO3 based materials exhibit advantages such as high permittivity, low dielectric loss, low cost and being environmentally-friendly, which make it one of the most widely studied candidates for MLCC dielectrics. However, the permittivity-temperature stability of purified BaTiO3 is unable to meet the requirement of temperature-stable MLCC. Owing to the limitation of the Curie tempe-rature of BaTiO3, it is hard to improve its permittivity-temperature stability to achieve the X8R/X9R standard by simply modifying BaTiO3 itself. Therefore, the avenue of forming BaTiO3-based solid solutions with the mixture of other perovskite compounds including Bi(M)O3, (Bi0.5Na0.5)-TiO3, K0.5Na0.5NbO3 and CaCu3Ti4O12 has attracted much attention, as well as the modification of received BaTiO3-based complex perovskite dielectrics. In this paper, the research progress on BaTiO3-based complex perovskite dielectrics for temperature-stable MLCC application in recent years is reviewed, and the development prospects are commented.
[1] Jia W, Hou Y, Zheng M, et al. IET Nanodielectrics, 2018, 1(1), 3. [2] Shrout T R, Zhang S J. Journal of Electroceramics, 2007, 19(1), 113. [3] von Hippel A. Reviews of Modern Physics, 1950, 22(3), 221. [4] Tkacz-Smiech K, Kolezyński A, Ptak W S. Solid State Communications, 2003, 127(8), 557. [5] Pan M, Randall C A. IEEE Electrical Insulation Magazine, 2010, 26(3), 44. [6] Hoshina T, Wada S, Kuroiwa Y, et al. Applied Physics Letters, 2008, 93(19), 192914. [7] Fujii I, Ugorek M, Trolier-McKinstry S. Journal of Applied Physics, 2010, 107(10), 104116. [8] Ghayour H, Abdellahi M. Powder Technology, 2016, 292, 84. [9] Lee S, Rossetti G A, Liu Z K, et al. Journal of Applied Physics, 2009, 105(9), 093519. [10] Chang C Y, Wang R L, Huang C Y. Journal of Materials Research, 2012, 27(23), 2937. [11] Yoon S H, Kim S J, Kim S H, et al. Journal of Applied Physics, 2013, 114(22), 224103. [12] Liu X, Zhu M, Chen Z, et al. Journal of Alloys and Compounds, 2014, 613, 219. [13] Tsung L Y, Fu O S, Horng L M, et al. Ceramics International, 2018, 44(4), 3531. [14] Ma R, Cui B, Wang Y, et al. Materials Research Bulletin,2019,111,311. [15] Zhang L, Thakur O P, Feteira A, et al. Applied Physics Letters, 2007, 90(14), 142914. [16] Brajesh K, Kalyani A K, Ranjan R. Applied Physics Letters, 2015, 106(1), 012907. [17] Fang B J, Wang W W, Ding J N, et al. Advances in Applied Ceramics, 2013, 112(5), 257. [18] Gong H, Wang X, Zhang S, et al. Materials Research Bulletin, 2016, 73, 233. [19] Santos I A, Eiras J A. Journal of Physics: Condensed Matter, 2001, 13(50), 11733. [20] Triamnak N, Yimnirun R, Pokorny J, et al. Journal of the American Ceramic Society, 2013, 96(10), 3176. [21] Beuerlein M A, Kumar N, Usher T M, et al. Journal of the American Ceramic Society, 2016, 99(9), 2849. [22] Ogihara H, Randall C A, Trolier-McKinstry S. Journal of the American Ceramic Society, 2009, 92(1), 110. [23] Bootchanont A, Triamnak N, Rujirawat S, et al. Ceramics International, 2014, 40(9), 14555. [24] Muhammad R, Iqbal Y. Ceramics International, 2016, 42(16), 19413. [25] Muhammad R, Iqbal Y, Reaney I M, et al. Journal of the American Ceramic Society, 2016, 99(6), 2089. [26] Muhammad R, Khesro A. Materials Letters, 2017, 193, 244. [27] Muhammad R, Khesro A, Uzair M. Journal of Electronic Materials, 2016, 45(8), 4083. [28] Raengthon N, Cann D P. Journal of the American Ceramic Society, 2012, 95(5), 1604. [29] Raengthon N, DeRose V J, Brennecka G L, et al. Applied Physics Letters, 2012, 101(11), 112904. [30] Wu L, Wang X, Shen Z, et al. Journal of the American Ceramic Society, 2017, 100(1), 265. [31] Zeb A, Bai Y, Button T, et al. Journal of the American Ceramic Society, 2014, 97(8), 2479. [32] Krayzman V, Levin I, Woicik J C, et al. Applied Physics Letters, 2015, 107(19), 192903. [33] Hou D, Usher T M, Zhou H, et al. Journal of Applied Physics, 2017, 122(6), 064103. [34] Roncal-Herrero T, Harrington J, Zeb A, et al. Acta Materialia, 2018, 158, 422. [35] Zhang Q, Li Z, Li F, et al. Journal of the American Ceramic Society, 2011, 94(12), 4335. [36] Xiong B, Hao H, Zhang S, et al. Ceramics International,2012,38,45. [37] Zeb A, Milne S J. Journal of the American Ceramic Society, 2013, 96(9), 2887. [38] Zeb A, Milne S J. Journal of the American Ceramic Society, 2013, 96(12), 3701. [39] Jan S U, Zeb A, Milne S J. Journal of the European Ceramic Society, 2016, 36(11), 2713. [40] Si F, Tang B, Fang Z, et al. Crystals, 2017, 7(6), 168. [41] Raengthon N, Brown-Shaklee H J, Brennecka G L, et al. Journal of Materials Science, 2012, 48(5), 2245. [42] Wang T, Jin L, Li C, et al. Journal of the American Ceramic Society, 2015, 98(2), 559. [43] Liu M, Hao H, Chen W, et al. Ceramics International,2016,42(1),379. [44] Liu M, Hao H, Zhen Y, et al. Journal of the European Ceramic Society, 2015, 35(8), 2303. [45] Wang Y, Pu Y, Zheng H, et al. Materials Letters, 2016, 181, 358. [46] Wang S F, Huebner W. Journal of the American Ceramic Society, 1992, 75(9), 2339. [47] Wang S F, Huebner W. Journal of the American Ceramic Society, 1993, 76(2), 474. [48] Smolensky G A, Isupov V A, Agranovskaya A I, et al. Soviet Physics, Solid State, 1961, 2, 2651. [49] Rdel J, Jo W, Seifert K T P, et al. Journal of the American Ceramic Society, 2009, 92(6), 1153. [50] Jones G O, Thomas P A. Acta Crystallogr B, 2002, 58(2), 168. [51] Zhao N, Fan H, Ning L, et al. Journal of the American Ceramic Society, 2018, 101(12), 5578. [52] Ma W G, Zhu Y W, Marwat M A, et al. Journal of Materials Chemistry C, 2019, 7(2), 281. [53] Qi H, Zuo R Z. Journal of Materials Chemistry A, 2019, 7(8), 3971. [54] Su C, Hao H, Xu Q, et al. Journal of Materials Science: Materials in Electronics, 2016, 27(6), 6140. [55] Cui C, Pu Y, Li X, et al. Materials Research Bulletin, 2018, 105, 114. [56] Takenaka T, Maruyama K, Sakata K. Japanese Journal of Applied Phy-sics, 1991, 30(9B), 2236. [57] Suchanicz J, Kusz J, Bhm H. Materials Science and Engineering: B, 2003, 97(2), 154. [58] Suchanicz J, Kusz J, Bhm H, et al. Journal of the European Ceramic Society, 2003, 23(10), 1559. [59] Gomah-Pettry J R, Sad S, Marchet P, et al. Journal of the European Ceramic Society, 2004, 24(6), 1165. [60] Takeda H, Aoto W, Shiosaki T. Applied Physics Letters, 2005, 87(10), 102104. [61] Gao L, Huang Y, Hu Y, et al. Ceramics International, 2007, 33(6), 1041. [62] Datta K, Roleder K, Thomas P A. Journal of Applied Physics, 2009, 106(12), 123512. [63] Datta K, Thomas P A, Roleder K. Physical Review B, 2010, 82(22), 224105. [64] Yuan Y, Du M, Zhang S, et al. Journal of Materials Science: Materials in Electronics, 2009, 20(2), 157. [65] Yuan Y, Zhang S R, Zhou X H, et al. Journal of Electronic Materials, 2009, 38(5), 706. [66] Tang B, Zhang S R, Zhou X H, et al. Journal of Electroceramics, 2010, 25(1), 93. [67] Li L, Han Y, Zhang P, et al. Journal of Materials Science, 2009, 44(20), 5563. [68] Li L, Guo D, Xia W, et al. Journal of the American Ceramic Society, 2012, 95(7), 2107. [69] Li L, Wang M, Liu Y, et al. Ceramics International, 2013, 40(1), 1105. [70] Wang M, Li L, Zhang N, et al. Journal of the American Ceramic Society, 2013, 96(10), 3046. [71] Li L, Chen J, Guo D, et al. Ceramics International, 2014, 40(8), 12539. [72] Li L, Chen J, Zhang N, et al. Journal of Materials Science: Materials in Electronics, 2014, 26(1), 84. [73] Zhang N, Li L, Yu J. Materials Letters, 2015, 160, 128. [74] Zhang B, Li L. Ceramics International, 2016, 42(10), 11535. [75] Li L, Zhang B. Scripta Materialia, 2016, 114, 170. [76] Zhang N, Li L, Chen J, et al. Materials Letters, 2015, 138, 228. [77] Zhang N, Li L, Chen J, et al. Ceramics International, 2015, 41(3B), 4805. [78] Li L, Cai Z, Zhang N, et al. Ceramics International,2017,43(9),7271. [79] Yao G F, Wang X H, Li L T. Key Engineering Materials, 2012, 512-515, 1160. [80] Yao G, Wang X, Wu Y, et al. Journal of the American Ceramic Society, 2012, 95(2), 614. [81] Yao G, Wang X, Zhang Y, et al. Journal of the American Ceramic Society, 2012, 95(11), 3525. [82] Shen Z, Wang X, Li L. Journal of Materials Science: Materials in Electronics, 2016, 28(4), 3768. [83] Shen Z B, Wang X H, Song D S, et al. Advances in Applied Ceramics, 2016, 115(7), 435. [84] Chen L, Wang H, Zhao P, et al. Journal of the American Ceramic Society, 2019, 102(7), 4178. [85] Chen L, Wang H, Zhao P, et al. Journal of the American Ceramic Society, 2019, 102(5), 2781. [86] Chen L, Hui K, Wang H, et al. Journal of the European Ceramic Society, 2019, 39(13), 3710. [87] Chen L, Wang H, Zhao P, et al. Journal of the American Ceramic Society, 2019, 103(2), 1113. [88] Shirane G, Newnham R, Pepinsky R. Physical Review,1954,96(3),581. [89] Du H, Zhou W, Luo F, et al. Journal of Applied Physics, 2009, 105(12), 124104. [90] Guo Y, Kakimoto K, Ohsato H. Japanese Journal of Applied Physics, 2004, 43(9S), 6662. [91] Ahn C W, Song H C, Nahm S, et al. Japanese Journal of Applied Phy-sics, 2005, 44(44), 1361. [92] Park H Y, Ahn C W, Song H C, et al. Applied Physics Letters, 2006, 89(6), 062906. [93] Lu Y T, Chen X M, Jin D Z, et al. Materials Research Bulletin, 2005, 40(10), 1847. [94] Ha J, Ryu J, Lee H. Applied Physics Letters, 2014, 104(26), 262904. [95] Kim J, Lee H. Journal of Materials Science: Materials in Electronics, 2015, 27(3), 2315. [96] Subramanian M A, Li D, Duan N, et al. Journal of Solid State Chemistry, 2000, 151(2), 323. [97] Ramirez A P, Subramanian M A, Gardel M, et al. Solid State Communications, 2000, 115(5), 217. [98] Prompa K, Swatsitang E, Saiyasombat C, et al. Ceramics International, 2018, 44(11), 13267. [99] Sripakdee C, Prompa K, Swatsitang E, et al. Journal of Alloys and Compounds, 2019, 779, 521. [100] Swatsitang E, Prompa K, Putjuso T. Journal of Materials Science: Materials in Electronics, 2018, 29(15), 12639. [101] Prompa K, Swatsitang E, Putjuso T. Ceramics International, 2018, 44(17), 20739. [102] Swatsitang E, Prompa K, Putjuso T. Journal of Materials Science: Materials in Electronics, 2019, 30(23), 20789. [103] Swatsitang E, Prompa K, Putjuso T. Applied Surface Science, 2019, 478, 197. [104] Swatsitang E, Prompa K, Putjuso T. Applied Surface Science, 2019, 484, 925. [105] Swatsitang E, Prompa K, Putjuso T. Journal of Alloys and Compounds, 2019, 789, 231. [106] Swatsitang E, Prompa K, Putjuso T. Ceramics International, 2019, 45(12), 14733. [107] Zhao N, Liang P, Wu D, et al. Ceramics International, 2019, 45(17), 22991. [108] Prompa K, Swatsitang E, Putjuso T. Journal of Materials Science: Materials in Electronics, 2017, 28(20), 15033. [109] Mao P, Wang J, Zhang L, et al. Journal of Materials Science: Materials in Electronics, 2019, 30(14), 13401. [110] Almeida A F L, Fechine P B A, Góes J C, et al. Materials Science and Engineering: B, 2004, 111(2-3), 113. [111] Fechine P B A, Almeida A F L, Freire F N A, et al. Materials Chemistry and Physics, 2006, 96(2-3), 402. [112] Yang G, Yue Z X, Li X, et al. Key Engineering Materials, 2008, 368-372, 62. [113] Kim H E, Choi S M, Lee S Y, et al. Electronic Materials Letters, 2013, 9(3), 325. [114] Kim H E, Choi S M, Hong Y W, et al. Journal of Alloys and Compounds, 2014, 610, 594. [115] Norezan I, Yahya A K, Talari M K. Journal of Materials Science & Technology, 2012, 28(12), 1137. [116] Mao P, Wang J, Zhang L, et al. Journal of the European Ceramic Society, 2020,40(8),3011. [117] Singh L, Rai U S, Mandal K D, et al. Materials Characterization, 2014, 96, 54. [118] Negi R, Chandrasekhar M, Kumar P. Processing and Application of Ceramics, 2019, 13(2), 164.
渝公网安备50019002502923号 版权所有：《材料导报》编辑部
2022, Vol. 36 
