Abstract: Three-dimensional five-dimensional braided M40J carbon fiber preform was used as reinforcement and ZL301 as matrix alloy. Three-dimensional five-dimensional Cf/Al composites were fabricated by vacuum pressure infiltration. The microstructure and phase composition of three-dimensional five-dimensional Cf/Al composites were studied. The mechanical behavior of axial bending deformation and the macro-morphology of bending failure were analyzed.The results show that the axial distribution of fibers is uniform and there is a small amount of infiltration defects in the braided yarns. The brittle Al4C3 phase exists at the interface, which is the key to the bending mechanical properties.The mechanical behavior of composites under axial bending deformation presents remarkable non-linear characteristics. The deformation process of composites at room temperature, 350 ℃ and 400 ℃ can be divided into three stages:elastic deformation stage, elastic-plastic deformation stage and plastic fracture stage.
1 Lu Z X,Yang Z Y,Li Z P.Acta Materiae Compositae Sinica,2004(2),1(in Chinese). 卢子兴,杨振宇,李仲平.复合材料学报,2004(2),1. 2 Zhang Y Y,Zhou W C,Luo F,et al.Materials Reports B:Research Papers,2014,28(9),127(in Chinese). 张育英,周万城,罗发,等.材料导报:研究篇,2014,28(9),127. 3 Tao J B,Zhu D L,Dong F L,et al.Acta Materiae Compositae Sinica,2016,33(5),1020(in Chinese). 陶积柏,朱大雷,董丰路,等.复合材料学报,2016,33(5),1020. 4 Mo Y M,Zhao Z H,Luo G et al.Journal of Chongqing University of Technology(Natural Science),2020,34(3),112(in Chinese). 莫袁鸣,赵振华,罗刚,等.重庆理工大学学报(自然科学),2020,34(3),112 5 Wang X M,Xing Y F.Acta Aeronautica et Astronautica Sinica,2010,31(5),914(in Chinese). 汪星明,邢誉峰.航空学报,2010,31(5),914. 6 Bulat M, Ahlborn H, Gnädinger F, et al.Advances in Braiding Technology, DOI:org/10.1016/B978-0-08-100407-4.00015-6. 7 Zhang C,Xu X W,Xu X J.ActaMateriae Compositae Sinica,2015,32(5),1241(in Chinese). 张超,许希武,许晓静.复合材料学报,2015,32(5),1241. 8 Zhao H F,Liu H M,Qian J F,et al.Materials Reports,2002(10),35(in Chinese). 赵浩峰,刘红梅,钱继锋,等.材料导报,2002(10),35. 9 Wang Y B,Liu Z G,Hu L,et al.Aeronautical Manufacturing Technology,2017(19),78(in Chinese). 王一博,刘振国,胡龙,等.航空制造技术,2017(19),78. 10 Liu Z G,Huang X,Ya J X,et al.Acta Aeronautica et Astronautica Sinica,2017,38(8),97(in Chinese). 刘振国,黄祥,亚纪轩,等.航空学报,2017,38(8),97. 11 Wan Fan, Liu Rongjun, Wang Yanfei,et al.Ceramics International,DOI:10.1016/j.ceramint.2018.12.020. 12 Ahn Hyunchul, Yu Woong-Ryeol. Composite Structures, 2017,1105. 13 Sun Y,Liu J L,Zheng Y Y,et al.Journal of Textile Research,2018,39(2),49(in Chinese). 孙颖,刘俊岭,郑园园,等.纺织学报,2018,39(2),49. 14 Cao H J,Wang Y J, Liu F,et al.Fiber Reinforced Plastics/Composites,2013(Z3),39(in Chinese). 曹海建,王怡洁,刘菲,等.玻璃钢/复合材料,2013(Z3),39. 15 Jiao Y N,Li Y Q.Journal of Tianjin Polytechnic University,2017,36(4),23(in Chinese). 焦亚男,李媛琪.天津工业大学学报,2017,36(4),23. 16 Li J L,He G F,Chen G W.Acta Materiae Compositae Sinica,2010,27(6),58(in Chinese). 李嘉禄,贺桂芳,陈光伟.复合材料学报,2010,27(6),58. 17 Nie M M,Xu Z F,Yu H,et al.Acta Materiae Compositae Sinica,2016,33(12),2797(in Chinese). 聂明明,徐志锋,余欢,等.复合材料学报,2016,33(12),2797. 18 Hu Y S,Yin J X,Yu H,et al.Special Casting & Nonferrous Alloys,2018,38(10),1100(in Chinese). 胡银生,尹家新,余欢,等.特种铸造及有色合金,2018,38(10),1100. 19 Nie M M,Xu Z F,Xu P,et al.The Chinese Journal of Nonferrous Metals,2016,26(5),1001(in Chinese). 聂明明,徐志锋,徐鹏,等.中国有色金属学报,2016,26(5),1001. 20 Chu S J,Wu R J.Acta Metallurgica Sinica,1997(4),432(in Chinese). 储双杰,吴人洁.金属学报,1997(4),432. 21 Liu G J,Zhang H,Lin G Y,et al.Hot Working Technology,2002(6),13(in Chinese). 刘国金,张辉,林高用,等.热加工工艺,2002(6),13.