钛涂层制备与后处理工艺及应用研究进展

doi:10.11896/cldb.24010131

材料导报

2025, Vol. 39

Issue (2): 24010131-9 https://doi.org/10.11896/cldb.24010131

金属与金属基复合材料

钛涂层制备与后处理工艺及应用研究进展

万福程¹, 梁继超¹, 于爱华¹, 张嘉振¹, 路新^1,2,3,*

1 北京科技大学工程技术研究院高效轧制与智能制造国家工程研究中心,北京 100083
2 北京科技大学北京材料基因工程高精尖创新中心,北京 100083
3 北京科技大学新金属材料国家重点实验室,北京 100083

Progress in Preparation and Post-treatment Technology of Titanium Coating and Its Applications

WAN Fucheng¹, LIANG Jichao¹, YU Aihua¹, ZHANG Jiazhen¹, LU Xin^1,2,3,*

1 National Engineering Research Center for Advanced Rolling and Intelligent Manufacturing, Institute of Engineering Technology, University of Science and Technology Beijing, Beijing 100083, China
2 Beijing Advanced Innovation Center for Materials Genome Engineering, University of Science and Technology Beijing, Beijing 100083, China
3 State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 4387KB )
输出: BibTeX | EndNote (RIS)

摘要钛及其合金因低密度、高强度、优异耐蚀性等优点而应用于诸多领域,但钛价格较为昂贵,限制了其更广泛的应用。在基体表面制备钛涂层可以较低的成本对钛的优异特性加以利用,实现远高于传统有机涂层的耐久性与力学性能,因而围绕钛涂层所展开的研究日益增多。本文系统介绍了钛涂层的常用制备技术及后处理方式,并综合国内外研究进展,对钛涂层在海洋工程、生物医疗、航空航天等领域的应用现状进行了综述,最后总结了当前钛涂层发展所面临的问题并对未来趋势进行了展望。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	万福程
	梁继超
	于爱华
	张嘉振
	路新

关键词: 钛涂层喷涂技术后处理耐蚀性耐磨性

Abstract: Titanium (Ti) and its alloys are widely used in various fields due to their low density, high strength, and excellent corrosion resistance. However the relatively high cost of Ti limits its further application. By forming titanium coatings on the substrate, the cost can be greatly reduced, while still obtaining the desirable properties of Ti. Additionally, Ti coatings exhibit superior durability and mechanical properties compared to the conventional organic coatings, leading to the increasingly intensifying research in this field. This paper systematically clarifies the mainstream technologies for the preparation and post-treatment of Ti coatings, and summarizes worldwide researches of Ti coating with applications in the fields such as marine engineering, biomedical engineering, aerospace, etc. The paper ends with a prospective discussion about the existing challenges and the future trends with respect to the development of Ti coatings.

Key words: titanium coating spraying technology post-treatment corrosion resistance wear resistance

出版日期: 2025-01-25 发布日期: 2025-01-21

ZTFLH:

TG146.2

基金资助: 国家自然科学基金(52274359);中央高校基本科研业务经费(06500165);北京市自然科学基金(2212035);中国航空发动机集团产学研合作项目(HFZL2021CXY021);北京科技大学新金属材料国家重点实验室(2021Z-03;2022Z-14)

通讯作者: ^*路新,北京科技大学工程技术研究院研究员、博士研究生导师,国家优秀青年基金获得者。目前主要从事注射成形与增材制造等先进金属粉末近净成形技术、先进粉末冶金材料模拟计算及优化设计方法、生物医用钛合金材料制备与表征等方面的研究工作。luxin@ustb.edu.cn

作者简介: 万福程,北京科技大学工程技术研究院硕士研究生,在路新研究员的指导下进行研究。目前主要研究领域为海洋防污钛涂层。

引用本文:

万福程, 梁继超, 于爱华, 张嘉振, 路新. 钛涂层制备与后处理工艺及应用研究进展[J]. 材料导报, 2025, 39(2): 24010131-9.
WAN Fucheng, LIANG Jichao, YU Aihua, ZHANG Jiazhen, LU Xin. Progress in Preparation and Post-treatment Technology of Titanium Coating and Its Applications. Materials Reports, 2025, 39(2): 24010131-9.

链接本文:

https://www.mater-rep.com/CN/10.11896/cldb.24010131 或 https://www.mater-rep.com/CN/Y2025/V39/I2/24010131

1 Liu C, Zhang Y H, Liu J F, et al. Ocean Engineering Equipment and Technology, 2021, 8(2), 75 (in Chinese).
刘存, 张有慧, 刘俊斐, 等.海洋工程装备与技术, 2021, 8(2), 75.
2 Tian L M, Yin Y, Bing W, et al. Journal of Bionic Engineering, 2021, 18(2), 239.
3 Li W Y, Cao C, Yin S. Progress in Materials Science, 2020, 110, 100633.
4 Meghwal A, Anupam A, Murty B S, et al. Journal of Thermal Spray Technology, 2020, 29(5), 857.
5 Liu Y N, Ding Y, Yang L J, et al. Journal of Manufacturing Processes, 2021, 66, 341.
6 Lu X. Titanium powder near net forming technology, Metallurgical Industry Press, China, 2022, pp. 1 (in Chinese).
路新. 钛粉末近净成形技术, 冶金工业出版社, 2022, pp. 1.
7 Zhao Z P. Study on the properties of Ti/steel clad plate prepared by cold spraying-rolling method. Ph.D. Thesis, University of Science and Technology of China, China, 2020 (in Chinese).
赵志坡. 冷喷涂-轧制制备钛/钢复合板及其性能研究. 博士学位论文, 中国科学技术大学, 2020.
8 Li N, Wang Q, Dong F, et al. Materials, 2022, 15(23), 8535.
9 Li R Z, Wang S H, Pu J B, et al. Corrosion Science, 2021, 192, 109838.
10 Zeng F F, Qiu L C, Wu L Y, et al. Surface Technology, 2023, 52(8), 1 (in Chinese).
曾芳芳, 邱联昌, 吴立颖, 等. 表面技术, 2023, 52(8), 1.
11 Huang S F, Zeng X L, Peng Z, et al. Special Casting & Nonferrous Alloys, 2023, 43(7), 876 (in Chinese).
黄绍服, 曾祥领, 彭振, 等. 特种铸造及有色合金, 2023, 43(7), 876.
12 Tian J J, Xu K W, Hu J H, et al. Journal of Materials Science & Techno-logy, 2021, 79, 62.
13 Qu Y P, Wang J, Wu J Y, et al. Materials Protection, 2014, 47(4), 57 (in Chinese).
曲彦平, 王建, 吴俊宇, 等. 材料保护, 2014, 47(4), 57.
14 Liao T Y, Biesiekierski A, Berndt C C, et al. Progress in Surface Science, 2022, 97(2), 100654.
15 Guo J J, Yang Y F, Zhu Q S, et al. Surface and Coatings Technology, 2018, 353, 18.
16 Ang A, Berndt C. International Materials Reviews, 2014, 59(4), 179.
17 Chen J Q, Liu M, Deng C M, et al. Heat Treatment of Metals, 2018, 43(1), 204 (in Chinese).
陈建强, 刘敏, 邓春明, 等. 金属热处理, 2018, 43(1), 204.
18 Ishikawa K, Suzuki T, Kitamura Y, et al. Journal of Thermal Spray Technology, 1999, 8(2), 273.
19 Vilardell A M, Cinca N, Garcia-Giralt N, et al. Materials Science and Engineering C, 2020, 107, 110306.
20 Zhang W X, Gu J P, Zhang C, et al. Surface and Coatings Technology, 2019, 358, 511.
21 Sun X, Li W, Huang J H, et al. Applied Surface Science, 2020, 508, 145264.
22 Zhou H X, Li C X, Li C J. China Surface Engineering, 2020, 33(2), 1 (in Chinese).
周红霞, 李成新, 李长久. 中国表面工程, 2020, 33(2), 1.
23 Gulizia S, Trentin A, Vezzù S, et al. In: Thermal Spray 2010: Procee-dings from the International Thermal Spray Conference. Singapore, 2010, pp. 80.
24 Poza P, Garrido-Maneiro M Á. Progress in Materials Science, 2022, 123, 100839.
25 Gardon M, Latorre A, Torrell M, et al. Materials Letters, 2013, 106, 97.
26 Wong W, Irissou E, Ryabinin A, et al. Journal of Thermal Spray Technology, 2011, 20(1), 213.
27 MacDonald D, Rahmati S, Jodoin B, et al. Journal of Thermal Spray Technology, 2019, 28(1), 161.
28 Li W Y, Cao C C, Wang G Q, et al. Science and Technology of Welding and Joining, 2019, 38(3), 337.
24010131-829 Pan J M, Sun Y F, Liu X H, et al. Practical surface engineering manual, China Machine Press, China, 2018, pp. 843 (in Chinese).
潘继民, 孙玉福, 刘新红, 等. 实用表面工程手册, 机械工业出版社, 2018, pp. 843.
30 Wu Z J, Wu Z J, Zeng K L, et al. Modern thermal spraying technology, China Machine Press, China, 2018, pp. 11 (in Chinese).
吴子健, 吴朝军, 曾克里, 等. 现代热喷涂技术, 机械工业出版社, 2018, pp. 11.
31 Xie Z Y, Liu C S, Wu Q, et al. Surface Technology, 2023, 52(7), 25 (in Chinese).
谢志颖, 刘常升, 吴琼, 等. 表面技术, 2023, 52(7), 25.
32 Wang C, Li J J, Wang T, et al. Surface and Coatings Technology, 2021, 416, 127137.
33 Wang P, Ye Y S. Applied Laser, 2018, 38(3), 377 (in Chinese).
王培, 叶源盛. 应用激光, 2018, 38(3), 377.
34 Ma W, Xu X, Xie Y S, et al. Surface and Coatings Technology, 2024, 477, 130383.
35 Wang Z W. Preparation process and properties of titanium and titanium alloy coatings by plasma cladding. Master's Thesis, University of Science and Technology Beijing, China, 2019 (in Chinese).
王志炜. 等离子熔覆钛及钛合金涂层制备工艺及性能研究. 硕士学位论文, 北京科技大学, 2019.
36 Zhu L D, Xue P S, Lan Q, et al. Optics & Laser Technology, 2021, 138, 106915.
37 Xiao Y, Xiong J, Guo Z X, et al. Journal of Central South University, 2020, 27(3), 721.
38 Choy K L. Progress in Materials Science, 2003, 48(2), 57.
39 Jin N, Yang Y Q, Luo X, et al. Progress in Materials Science, 2013, 58(8), 1490.
40 Deng Y, Chen W L, Li B X, et al. Ceramics International, 2020, 46, 18373.
41 Kim H J, Odoul S, Lee C H, et al. Surface and Coatings Technology, 2001, 140(3), 293.
42 Luo X T, Wei Y K, Wang Y, et al. Materials & Design, 2015, 85, 527.
43 Zhao Z P, Tariq N H, Tang J R, et al. Materials & Design, 2020, 185, 108249.
44 Li W Y, Zhang C, Guo X, et al. Advanced Engineering Materials, 2007, 9(5), 418.
45 Molak R M, Araki H, Watanabe M, et al. Journal of Thermal Spray Technology, 2015, 24(8), 1459.
46 Zhu W Y. Effect of sealing treatment on corrosion resistance of thermal sprayed metal base coatings. Master's Thesis, Yangzhou University, China, 2021 (in Chinese).
朱无言. 封孔处理对热喷涂金属涂层耐腐蚀性能影响研究. 硕士学位论文, 扬州大学, 2021.
47 Shi Z P, Wang Z B, Qiao Y X. Materials Science & Engineering Techno-logy, 2020, 51(11), 1507.
48 Deng W, Hou G L, Li S J, et al. Ultrasonics Sonochemistry, 2018, 44, 115.
49 Morończyk B, Ura-Bińczyk E, Kuroda S, et al. Surface and Coatings Technology, 2019, 363, 142.
50 Bi S Q, Xu K W, Shao G S, et al. Journal of Materials Science & Technology, 2023, 159, 125.
51 Gao Y K. Surface Engineering, 2006, 22(4), 299.
52 Liu J Y, Luo X T, Wan P, et al. Thermal Spray Technology, 2023, 15(4), 1 (in Chinese).
刘建禹, 雒晓涛, 万鹏, 等. 热喷涂技术, 2023, 15(4), 1.
53 Xiao H, Liu X, Lu Q H, et al. Journal of Materials Research and Technology, 2022, 19, 2981.
54 Faksa L, Daves W, Ecker W, et al. International Journal of Refractory Metals and Hard Materials, 2019, 82, 174.
55 Zhou H X, Li C X, Ji G, et al. Journal of Alloys and Compounds, 2018, 766, 694.
56 Xiong T Y, Wang J Q. Acta Metallurgica Sinica, 2023, 59(4), 537 (in Chinese).
熊天英, 王吉强. 金属学报, 2023, 59(4), 537.
57 Li Z M, Yang X P, Zhang J B, et al. Advanced Engineering Materials, 2016, 18(7), 1240.
58 Zhao Z P, Tang J R, Tariq N H, et al. Materials Science and Engineering A, 2020, 795, 139982.
59 Zhao Z P, Tariq N H, Tang J R, et al. Materials Science and Engineering A, 2020, 775, 138968.
60 Zhai Y J, Liu X B, Qiao S J, et al. Surface Technology, 2017, 46(6), 207 (in Chinese).
翟永杰, 刘秀波, 乔世杰, 等. 表面技术, 2017, 46(6), 207.
61 Ullah I, Siddiqui M A, Liu H, et al. ACS Biomaterials Science & Engineering, 2020, 6(3), 1355.
62 Jin H C, Tian L M, Bing W, et al. Progress in Materials Science, 2022, 124, 100889.
63 Li Z Y, Wang N, Li S H, et al. Coatings, 2023, 13(11), 1894.
64 Bai Y L, Liu X F, Wang W J, et al. Chinese Journal of Engineering, 2021, 43(1), 85 (in Chinese).
白于良, 刘雪峰, 王文静, 等. 工程科学学报, 2021, 43(1), 85.
65 Wu L K, Guo P J, Zheng L, et al. Surface Technology, 2022, 51(5), 79 (in Chinese).
伍廉奎, 郭蒲俊, 郑磊, 等. 表面技术, 2022, 51(5), 79.
66 Wang Z Z, Huang G S, Xing L K, et al. Titanium Industry Progress, 2020, 37(2), 7 (in Chinese).
王治中, 黄国胜, 邢路阔, 等. 钛工业进展, 2020, 37(2), 7.
67 鲁宏, 戴魏魏, 蒋倩, 等. 中国专利, CN115627470A, 2023.
68 Hai M N, Huang F, Wang Y M. Metal World, 2021, 37(5), 16 (in Chinese).
海敏娜, 黄帆, 王永梅. 金属世界, 2021, 37(5), 16.
69 Gu Z J, Su F T, Zhang Z G, et al. Corrosion & Protection, 1999, 20(4), 166 (in Chinese).
辜志俊, 苏方腾, 张志刚, 等. 腐蚀与防护, 1999, 20(4), 166.
70 Romeu M J, Mergulhão F. Microorganisms, 2023, 11(6), 1568.
71 Selim M S, Yang H, Wang F Q, et al. RSC Advances, 2018, 8(18), 9910.
72 Zhai X F, Ju P, Guan F, et al. Surface and Coatings Technology, 2020, 397, 125959.
73 Sha J N, Liu X, Chen R R, et al. Journal of Colloid and Interface Science, 2023, 637, 67.
74 Richards C, Slaimi A, O'Connor N, et al. International Journal of Molecular Sciences, 2020, 21(14), 5063.
75 Zhao Y, Wang C T, Hu J M, et al. Ceramics International, 2021, 47(5), 7233.
76 Yi P, Jia H Y, Yang X S, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 656, 130357.
77 Yu Y, Xu N N, Zhu S Y, et al. Journal of Materials Science & Technology, 2021, 69, 48.
78 Veiga C, Davim J P, Loureiro A J R. Reviews on Advanced Materials Science, 2012, 32, 133.
79 Sonoda T, Saito T, Watazu A, et al. Surface and Interface Analysis, 2006, 38(4), 797.
80 Sun J F, Han Y, Cui K. Materials Letters, 2008, 62(21), 3623.
81 Guillem-Marti J, Cinca N, Punset M, et al. Colloids and Surfaces B: Biointerfaces, 2019, 180, 245.
82 Ren X H, Zhou M L, Zhen Z X, et al. China Medical Equipment, 2022, 19(12), 21 (in Chinese).
任旭辉, 周梦林, 郑照县, 等. 中国医学装备, 2022, 19(12), 21.
83 Zhao C L, Zhu Y B, Yuan Z W, et al. Surface and Coatings Technology, 2020, 403, 126399.
84 Krella A K. Surface and Coatings Technology, 2013, 228, 115.
85 Jin X M, Gao L Z, Liu E Q, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2015, 50, 23.
86 Ji Z Y, Ma X, Liu P, et al. Materials Protection, 2023, 56(2), 1 (in Chinese).
季震宇, 马迅, 刘平, 等. 材料保护, 2023, 56(2), 1.
87 Wang Q, Tang Z L, Herout R, et al. Surfaces and Interfaces, 2024, 45, 103856.
24010131-988 Wang X, Luo X K, Yu B, et al. Aeronautical Manufacturing Technology, 2022, 65(4), 14 (in Chinese).
王欣, 罗学昆, 宇波, 等. 航空制造技术, 2022, 65(4), 14.
89 Ji M M, Zhu S Z, Ma Z. Surface Technology, 2021, 50(1), 253 (in Chinese).
姬梅梅, 朱时珍, 马壮. 表面技术, 2021, 50(1), 253.
90 Li B, Ding R D, Shen Y F, et al. Materials & Design, 2012, 35, 25.
91 Feng Y Q, Feng K, Yao C W, et al. Materials & Design, 2019, 181, 107959.
92 Cao X, He W F, Wang S G, et al. China Surface Engineering, 2021, 34(3), 120 (in Chinese).
曹鑫, 何卫锋, 汪世广, 等. 中国表面工程, 2021, 34(3), 120.
93 Yang R F, Li X, Sun Q X, et al. Heat Treatment, 2021, 36(1), 6 (in Chinese).
杨镕菲, 李想, 孙启轩, 等. 热处理, 2021, 36(1), 6.
94 Xie W L, Zhao Y M, Liao B, et al. Surface and Coatings Technology, 2022, 441, 128590.
95 Yuan F H, Zhang J P, Cheng Y X, et al. Aeronautical Manufacturing Technology, 2016(S1), 40 (in Chinese).
袁福河, 张佳平, 程玉贤, 等. 航空制造技术, 2016(S1), 40.
96 Golkovski M G, Samoylenko V V, Polyakov I A, et al. Journal of Phy-sics: Conference Series, 2018, 1115(4), 042045.

[1]	张泽疆, 李新梅, 朱春金, 李航, 杨定力. 纳米TiB₂对CoCrFeNiSi高熵合金涂层耐磨与耐蚀性能的影响[J]. 材料导报, 2025, 39(3): 23090210-9.
[2]	申爱琴, 陈荣伟, 郭寅川, 范建航, 戴晓倩, 丑涛. 季冻区纳米SiO₂改性SAP路面混凝土的耐磨性[J]. 材料导报, 2024, 38(7): 23010093-6.
[3]	赵清平, 亢淑梅, 邹方正, 朱忠博, 李鹏宇. 甘油微胶囊搭载硅烷环氧共混涂层的耐蚀性研究[J]. 材料导报, 2024, 38(7): 22080166-6.
[4]	笪强, 马国政, 康嘉杰, 黄艳斐, 周永宽, 王海斗. 耐磨耐蚀高熵合金涂层性能研究进展[J]. 材料导报, 2024, 38(24): 23110145-10.
[5]	邱靖, 胡剑, 陈绵, 衣玉玮. 表面自纳米化医用金属材料的研究进展[J]. 材料导报, 2024, 38(23): 23070239-10.
[6]	张勇, 王斌斌, 刘琛, 李斌强, 赵俊波, 李志文, 李哲, 赵春志, 王亮, 苏彦庆. 增材制造金属材料在海洋环境下的耐蚀性能——综述[J]. 材料导报, 2024, 38(23): 23080239-11.
[7]	张雷, 龙伟民, 樊志斌, 都东, 刘大双, 孙志鹏, 李宇佳, 尚勇. CuTi对Ti-6Al-4V钛合金表面金刚石/AlSi复合钎涂层组织与耐磨性能的影响[J]. 材料导报, 2024, 38(21): 23080114-4.
[8]	胥聪敏, 李雪丽, 朱文胜, 朱世东, 杨兴, 高豪然, 孙姝雯. D-氨基酸增强型杀菌剂对三种金属材料腐蚀行为的影响[J]. 材料导报, 2024, 38(20): 23090099-6.
[9]	段逸飞, 王建利, 袁满, 王礼营, 杨忠, 李菲, 田皓. 镁锂合金中LPSO相的研究进展[J]. 材料导报, 2024, 38(20): 23020055-10.
[10]	郭伟玲, 邢志国, 李鹏, 马国政, 王海斗. 冷喷涂铜基复合涂层及后处理技术的研究现状[J]. 材料导报, 2024, 38(19): 23010049-13.
[11]	曹晓君, 刘美辰, 杨康, 马义明, 王俊杰, 黎军顽. 可降解铸态Zn-Cu-Sr合金的组织与性能[J]. 材料导报, 2024, 38(18): 23060210-7.
[12]	吴长军, 朱付成, 王权, 彭浩平, 刘亚, 苏旭平. 600～1 000 ℃退火处理对FCC型Co_xFeMnNi_3-x合金组织演变及耐蚀性的影响[J]. 材料导报, 2024, 38(18): 23080153-7.
[13]	高吉昌, 门秀花, 姜帅, 付秀丽, 蒋振峰, 李艳. 高铬铸铁叶片堆焊工艺研究进展[J]. 材料导报, 2024, 38(17): 23050109-9.
[14]	王婷, 胡斌, 王文琴, 王非凡. 微弧火花沉积Zr基非晶涂层的组织及性能[J]. 材料导报, 2024, 38(16): 22090308-6.
[15]	朱志彬, 蒋丽, 李艳辉, 张伟. 高熵复合材料微观结构、力学性能及耐磨性研究进展[J]. 材料导报, 2024, 38(14): 23050131-12.

[1]	Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO₂/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2]	Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3]	Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4]	Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5]	Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6]	Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7]	Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8]	Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9]	Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10]	Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .

Viewed

Full text

Abstract

Cited

Shared

Discussed