连续纤维增强复合材料3D打印结构拓扑优化及路径规划研究进展

doi:10.11896/cldb.24080031

材料导报

2025, Vol. 39

Issue (21): 24080031-10 https://doi.org/10.11896/cldb.24080031

高分子与聚合物基复合材料

连续纤维增强复合材料3D打印结构拓扑优化及路径规划研究进展

牛婉莹, 刘建康^*, 王志强

天津职业技术师范大学机械工程学院,天津 300222

Research Progress on Topology Optimization and Path Planning of Continuous Fiber Reinforced Composite 3D Printing Structure

NIU Wanying, LIU Jiankang^*, WANG Zhiqiang

School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 21254KB )
输出: BibTeX | EndNote (RIS)

摘要连续纤维增强复合材料3D打印技术结合了传统3D打印的灵活性和复合材料的高性能,能够制造出轻质、高强度、具有复杂几何形状的部件。本文对连续纤维增强复合材料3D打印结构拓扑优化方法和路径规划算法的研究进展进行了综述,分析了拓扑优化方法在连续纤维3D打印结构中的应用和优势,以及路径规划方法对3D打印成型质量和力学性能的影响,讨论了连续纤维3D打印结构拓扑优化和路径规划协同设计方法,最后,针对连续纤维增强复合材料3D打印技术的未来发展进行了展望。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	牛婉莹
	刘建康
	王志强

关键词: 连续纤维增强复合材料 3D打印拓扑优化路径规划协同设计

Abstract: Continuous fiber-reinforced composite 3D printing technology combines the flexibility of traditional 3D printing with the high performance of composites to produce lightweight, high-strength parts with complex geometries. This paper reviews the research progress of topology optimization methods and path planning algorithms for continuous fiber reinforced composite 3D printed structures. The application and advantages of topology optimization methods in continuous fiber 3D printed structures and the influence of path planning methods on 3D printed molding quality and mechanical properties are analyzed, and the co-design methods of topology optimization and path planning for continuous fiber 3D printed structures are discussed. Finally, the future development of continuous fiber reinforced composite 3D printing technology is prospected.

Key words: continuous fiber reinforced composites 3D printing topology optimization path planning collaborative design

出版日期: 2025-11-10 发布日期: 2025-11-10

ZTFLH:

TB332

通讯作者: *刘建康,博士,天津职业技术师范大学机械工程学院讲师。目前主要从事增材制造、工业互联网、开放式体系架构控制系统等方面的研究。liu_jiankang@foxmail.com

作者简介: 牛婉莹,天津职业技术师范大学机械工程学院硕士研究生。目前主要研究领域为增材制造。

引用本文:

牛婉莹, 刘建康, 王志强. 连续纤维增强复合材料3D打印结构拓扑优化及路径规划研究进展[J]. 材料导报, 2025, 39(21): 24080031-10.
NIU Wanying, LIU Jiankang, WANG Zhiqiang. Research Progress on Topology Optimization and Path Planning of Continuous Fiber Reinforced Composite 3D Printing Structure. Materials Reports, 2025, 39(21): 24080031-10.

链接本文:

https://www.mater-rep.com/CN/10.11896/cldb.24080031 或 https://www.mater-rep.com/CN/Y2025/V39/I21/24080031

1 Hou Z H, Tian X Y, Zhang J K, et al. Composites Science and Technology, 2021, 201, 108502.
2 Meng Y C, Zhou G M, Cai D A, et al. Composites Science and Engineering, 2024(1), 98(in Chinese).
孟云聪, 周光明, 蔡登安, 等. 复合材料科学与工程, 2024(1), 98.
3 Tan L Z, Nie X F, Luo C Y, et al. Engineering Plastics Application, 2023, 51(12), 64(in Chinese).
谈丽姿, 聂祥樊, 罗楚养, 等. 工程塑料应用, 2023, 51(12), 64.
4 Tian X Y, Liu T F, Yang C C, et al. Aeronautical Manufacturing Technology, 2016(15), 26(in Chinese).
田小永, 刘腾飞, 杨春成, 等. 航空制造技术, 2016(15), 26.
5 Chen W, Zhang Q J. Materials Science and Technology, 2022, 30(1), 21(in Chinese).
陈威, 张秋菊. 材料科学与工艺, 2022, 30(1), 21.
6 Zhang F, Tan Y G, Ma G F, et al. Machinery Design & Manufacture, 2019(7), 96(in Chinese).
张帆, 谭跃刚, 马国锋, 等. 机械设计与制造, 2019(7), 96.
7 Meng Y C, Zhou G M, Cai D A. Acta Materiae Compositae Sinica, 2024, 41(4), 1776(in Chinese).
孟云聪, 周光明, 蔡登安. 复合材料学报, 2024, 41(4), 1776.
8 Tian X Y, Hou Z H, Zhang J K, et al. Aeronautical Manufacturing Technology, 2017(10), 34(in Chinese).
田小永, 侯章浩, 张俊康, 等. 航空制造技术, 2017(10), 34.
9 Ming Y K, Duan Y G, Wang B, et al. Aeronautical Manufacturing Technology, 2019, 62(4), 34(in Chinese).
明越科, 段玉岗, 王奔, 等. 航空制造技术, 2019, 62(4), 34.
10 Zhang X, Zheng X T, Yang T T, et al. Acta Materiae Compositae Sinica, 2024, 41(9), 4478(in Chinese).
张鑫, 郑锡涛, 杨甜甜, 等. 复合材料学报, 2024, 41(9), 4478.
11 Ye H L, Dong Y J, Mao P Q, et al. Advances in Mechanics, 2024, 54(2), 391(in Chinese).
叶红玲, 董永佳, 毛鹏琪, 等. 力学进展, 2024, 54(2), 391.
12 Hou Z H, Tian X Y, Zheng Z Q, et al. Composites Part B: Engineering, 2020, 189, 107893.
13 Zhuang Y X. Preparation of continuous fiber/resin composite filament and investigation of its composite FDM-3D printing forming performance. Master’s Thesis, Shandong University, China, 2023(in Chinese).
庄悦希. 连续纤维/树脂复合丝制备及其复材FDM-3D打印成形性能研究. 硕士学位论文, 山东大学, 2023.
14 Zhang R Y, Qian B, Liu G. Composites Science and Engineering, 2023(9), 112(in Chinese).
张荣耀, 钱波, 刘钢. 复合材料科学与工程, 2023(9), 112.
15 Lu N, Li Y X. Machine Design & Research, 2021, 37(3), 122(in Chinese).
吕宁, 李云旭. 机械设计与研究, 2021, 37(3), 122.
16 Zhao H S. Geometric research and application on additive and subtractive manufacturing. Ph. D. Thesis, Shandong University, China, 2018(in Chinese).
赵海森. 面向增减材料制造的几何研究与应用. 博士学位论文, 山东大学, 2018.
17 Hou W B, Xia M D, Xu J T. Computer Integrated Manufacturing Systems, 2017, 23(9), 1853(in Chinese).
侯文彬, 夏明栋, 徐金亭. 计算机集成制造系统, 2017, 23(9), 1853.
18 Qin R S, Sun S Z, Han Z Y, et al. Materials Reports, 2022, 36(17), 200(in Chinese).
秦若森, 孙守政, 韩振宇, 等. 材料导报, 2022, 36(17), 200.
19 Ren J J, Sun Y, Ju B W, et al. Composites Science and Engineering, 2023(11), 122(in Chinese).
任佳军, 孙颖, 鞠博文, 等. 复合材料科学与工程, 2023(11), 122.
20 Yu L T, Nie X F, Luo C Y. Aero Weaponry, 2023, 30(2), 42(in Chinese).
於琳涛, 聂祥樊, 罗楚养. 航空兵器, 2023, 30(2), 42.
21 Huang Y M, Tian X Y, Wu L L, et al. Composites Part B: Engineering, 2023, 255, 110602.
22 https://markforged. com/mark-two/.
23 Cao F, Zeng Z Y, Huang J, et al. Scientia Sinica(Technologica), 2023, 53(11), 1815(in Chinese).
曹丰, 曾志勇, 黄建, 等. 中国科学:技术科学, 2023, 53(11), 1815.
24 Cao H. Design of 3D printing platform for continuous fiber reinforced thermoplastic composites. Master’s Thesis, Jiangnan University, China, 2021(in Chinese).
曹汉. 连续纤维增强热塑性复合材料3D打印实验平台设计与开发. 硕士学位论文, 江南大学, 2021.
25 https://support. anisoprint. com/composer/.
26 Duan J Q. Research on open five-axis CNC system for 3D printing of continuous fiber. Master’s Thesis, Harbin Institute of Technology, China, 2022(in Chinese).
段嘉奇. 面向连续纤维3D打印的开放式五轴数控系统研究. 硕士学位论文, 哈尔滨工业大学, 2022.
27 https://www. desktopmetal. com/press/press-release-desktop-metal-set-to-transform-continuous-fiber-3d-printing.
28 https://arevoinc. com/.
29 https://www. continuouscomposites. com/.
30 Ming Y K, Wang B, Zhou J, et al. Aeronautical Manufacturing Technology, 2021, 64(15), 58(in Chinese).
明越科, 王奔, 周晋, 等. 航空制造技术, 2021, 64(15), 58.
31 Matsuzaki R, Ueda M, Namiki M, et al. Scientific Reports, 2016, 6(1), 1.
32 Tian X Y, Liu T F, Yang C C, et al. Composites Part A: Applied Science and Manufacturing, 2016, 88, 198.
33 Yang C C, Tian X Y, Liu T F, et al. Rapid Prototyping Journal, 2017, 23(1), 209.
34 Ma G F. Forming technology and system research of continuous carbon fiber composite materials 3D printing. Master’s Thesis, Wuhan University of Technology, China, 2017(in Chinese).
马国锋. 碳纤维长纤复合材料3D打印的成型工艺及其打印系统. 硕士学位论文, 武汉理工大学, 2017.
35 Ma G F, Tan Y G, Zhang F, et al. Machine Design & Research, 2017, 33(3), 147(in Chinese).
马国锋, 谭跃刚, 张帆, 等. 机械设计与研究, 2017, 33(3), 147.
36 Si Z F. Hull structure design and 3D printing process based on CFRP. Master’s Thesis, Dalian University of Technology, China, 2021(in Chinese).
司志夫. 基于连续碳纤维增强复合材料的船体分段结构设计及3D打印工艺研究. 硕士学位论文, 大连理工大学, 2021.
37 Chen W. Research on defect control and mechanical property strengthening of 3D printed continuous fiber composite. Ph. D. Thesis, Jiangnan University, China, 2023(in Chinese).
陈威. 连续纤维复合材料3D打印缺陷控制与力学性能强化研究. 博士学位论文, 江南大学, 2023.
38 Kong X R. Experimental study on mechanical properties of 3D printing fiber reinforced composites. Master’s Thesis, Hunan University, China, 2021(in Chinese).
孔祥任. 3D打印纤维增强复合材料力学特性实验研究. 硕士学位论文, 湖南大学, 2021.
39 Feng J W, Fei G X, Xia H S, et al. China Plastics Industry, 2024, 52(4), 89(in Chinese).
冯嘉伟, 费国霞, 夏和生, 等. 塑料工业, 2024, 52(4), 89.
40 Long Y, Li Y, Fu K K. Acta Materiae Compositae Sinica, 2022, 39(9), 4196(in Chinese).
龙昱, 李岩, 付昆昆. 复合材料学报, 2022, 39(9), 4196.
41 Zhang R Y, Qian B, Liu G. Materials Science and Technology, 2024, 32(1), 88(in Chinese).
张荣耀, 钱波, 刘钢. 材料科学与工艺, 2024, 32(1), 88.
42 Xiong T, Qian B, Hu Z T, et al. Engineering Plastics Application, 2023, 51(10), 76(in Chinese).
熊婷, 钱波, 胡珍涛, 等. 工程塑料应用, 2023, 51(10), 76.
43 Li Y W. Study on topology optimization method of fiber reinforced laminate structure. Master’s Thesis, Wuhan University of Technology, China, 2022(in Chinese).
李弋文. 纤维增强材料变刚度铺层结构拓扑优化方法研究. 硕士学位论文, 武汉理工大学, 2022.
44 Yu H, Yang H B, Mao J, et al. Engineering Plastics Application, 2024, 52(10), 91(in Chinese).
于海, 杨慧斌, 茅健, 等. 工程塑料应用, 2024, 52(10), 91.
45 Li W H, Mao J, Zheng W, et al. Modern Manufacturing Engineering, 2023(9), 45(in Chinese).
李伟豪, 茅健, 郑武, 等. 现代制造工程, 2023(9), 45.
46 Li G X, Chen Y, Wei G K. Composite Structures, 2024, 329, 117768.
47 Papapetrou V S, Patel C, Tamijani A Y. Composites Part B: Engineering, 2020, 183, 107681.
48 Yan X L, Lai M C, Huang D F, et al. Composite Structures, 2023, 310, 116779.
49 Dong Y J, Ye H L, Yang J X, et al. Mechanics of Advanced Materials and Structures, 2024, 31(25), 6962.
50 Li W H, Mao J, Zheng W, et al. Modern Manufacturing Engineering, 2023(6), 26(in Chinese).
李伟豪, 茅健, 郑武, 等. 现代制造工程, 2023(6), 26.
51 Yan X L, Wang Y, Chen J W, et al. Machinery Design & Manufacture, 2024(9), 238(in Chinese).
闫晓磊, 王宇, 陈佳文, 等. 机械设计与制造, 2024(9), 238.
52 Yan X L, Yang R T, Huang D F, et al. Engineering Mechanics, 2024, 41(12), 237(in Chinese).
闫晓磊, 杨瑞涛, 黄登峰, 等. 工程力学, 2024, 41(12), 237.
53 Ma G W, Yang W W, Wang L. Advances in Structural Engineering, 2022, 25, 1636.
54 Schmidt M P, Couret L, Gout C, et al. Structural and Multidisciplinary Optimization, 2020, 62, 3105.
55 Huang Y J, Yao X F, Yan L. Machinery Design & Manufacture, 2010(9), 39(in Chinese).
黄英杰, 姚锡凡, 颜亮. 机械设计与制造, 2010(9), 39.
56 Wang H, Jiang Z G, Zhang H, et al. Journal of Mechanical Engineering, 2019, 55(3), 147(in Chinese).
王涵, 江志刚, 张华, 等. 机械工程学报, 2019, 55(3), 147.
57 Bian G Y. Design on multi-objective optimization of fiber reinforced composite structure. Master’s Thesis, Hefei University of Technology, China, 2021(in Chinese).
卞光耀. 纤维增强复合材料结构多目标优化设计. 硕士学位论文, 合肥工业大学, 2021.
58 Long Y, Zhang Z S, Yan C, et al. Composites Communications, 2022, 35, 101283.
59 Huang Z. Study on design and mechanical properties of bionic composites based on plant fiber microstructure. Master’s Thesis, Tongji University, China, 2022(in Chinese).
黄振. 基于植物纤维微观结构的仿生复合材料设计及力学性能研究. 硕士学位论文, 同济大学, 2022.
60 Chen Y, Ye L. Composites Science and Technology, 2021, 204, 108644.
61 Wang Y, Li S S, Yu Y. Journal of Tongji University(Natural Science), 2020, 48(6), 869(in Chinese).
王玉, 李帅帅, 于颖. 同济大学学报(自然科学版), 2020, 48(6), 869.
62 Chen X Q, Zhao Y, Huo S L, et al. Acta Aeronautica et Astronautica Sinica, 2023, 44(15), 25(in Chinese).
陈小前, 赵勇, 霍森林, 等. 航空学报, 2023, 44(15), 25.
63 Duan Z Y, Liu Y Q, Fan J L, et al. Composite Structures, 2023, 311, 116796.
64 Kim D, Lee J, Nomura T, et al. Computer Methods in Applied Mechanics and Engineering, 2020, 369, 113220.
65 Ye H L, Dong Y J, Xiao Y, et al. Chinese Journal of Computational Mechanics, 2024, 41(5), 851(in Chinese).
叶红玲, 董永佳, 肖扬, 等. 计算力学学报, 2024, 41(5), 851.
66 Wang Z F. Multi-scale synergistic topology optimization of continuous fiber composite panel members. Master’s Thesis, Yanshan University, China, 2023(in Chinese).
王泽飞. 连续纤维复合板材构件多尺度协同拓扑优化研究. 硕士学位论文, 燕山大学, 2023.
67 Zhang W, Yin S, Yu T X, et al. International Journal of Impact Engineering. 2019, 125, 163.
68 Tabatabaei M, Atluri S N. Composite Structures, 2018, 196, 181.
69 Baumann F, Scholz J, Fleischer J. Procedia Cirp, 2017, 66, 323.
70 Heidari-Rarani M, Rafiee-Afarani M, Zahedi A M. Composites Part B: Engineering, 2019, 175, 107147.
71 Tan R S, Liu M Y, Zhang F, et al. Machinery Design & Manufacture, 2019(6), 1(in Chinese).
谭瑞诗, 刘明尧, 张帆, 等. 机械设计与制造, 2019(6), 1.
72 Lou P, Zhong Y J, Zhang F, et al. Journal of Wuhan University of Technology, 2017, 39(10), 87(in Chinese).
娄平, 衷宇骏, 张帆, 等. 武汉理工大学学报, 2017, 39(10), 87.
73 Dutra T A, Ferreira R T L, Resende H B, et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41, 133.
74 Ye W L, Lin G Q, Wu W Z, et al. Composites Part A: Applied Science and Manufacturing, 2019, 121, 457.
75 Todoroki A, Oasada T, Mizutani Y, et al. Advanced Composite Materials, 2019, 29(2), 147.
76 Zhou Z D, Chen F, Zhang F, et al. Journal of Wuhan University of Technology, 2017, 39(12), 81(in Chinese).
周祖德, 陈飞, 张帆, 等. 武汉理工大学学报, 2017, 39(12), 81.
77 Zhang F, Wei P X, Zhao Y Y, et al. Computer Integrated Manufacturing Systems, 2023, 29(5), 1517(in Chinese).
张帆, 魏培祥, 赵圆圆, 等. 计算机集成制造系统, 2023, 29(5), 1517.
78 Zhang Y, Wang T, Zhao Y, et al. In:2020 4th annual international conference on data science and business analytics (ICDSBA). Changsha, China, 2020, pp. 139.
79 Dai C K, Wang C L, Wu C M, et al. Acm Transactions on Graphics, 2018, 37, 1.
80 Sun Y. Web-based 3D printing path planning for porous structures. Master’s Thesis, Huaqiao University, China, 2020(in Chinese).
孙芸. 基于Web的多孔结构3D打印路径规划. 硕士学位论文, 华侨大学, 2020.
81 Zhai X Y, Chen F L. Computer-Aided Design, 2019, 115, 218.
82 Held M, Lorenzo S De. Journal of Computational Design and Engineering, 2017, 5, 348.
83 Mahdavi-Amiri A, Yu F, Zhao H, et al. ACM Transactions on Graphics, 2020, 39, 6.
84 Zhao H S, Gu F L, Huang Q X, et al. ACM Transactions on Graphics, 2016, 35(4), 100.
85 Zhai X Y, Chen F L. Journal of Computer-Aided Design & Computer, 2018, 30(6), 1123(in Chinese).
翟晓雅, 陈发来. 计算机辅助设计与图形学学报, 2018, 30(6), 1123.
86 Yang J X, Yao Y, Wu H X. Metrology & Measurement Technique, 2023, 50(10), 63(in Chinese).
杨金秀, 姚远, 吴焕晓. 计量与测试技术, 2023, 50(10), 63.
87 Zhang Y C. Methodology and implementation of Multi-DOF 3D printing system based on robot arm. Master’s Thesis, Shanhai University, China, 2021(in Chinese).
张亦弛. 一种基于机械臂的多自由度空间3D打印方法与实现. 硕士学位论文, 上海大学, 2021.
88 Yu S N, Zhang F, Tan Y G, et al. Machine Design & Research, 2023, 39(4), 166(in Chinese).
蔚晟楠, 张帆, 谭跃刚, 等. 机械设计与研究, 2023, 39(4), 166.
89 Lai M C. Topology optimization design of continuous fiber reinforced composites for 3D printing. Master’s Thesis, Fujian University of Technology, China, 2023(in Chinese).
赖民超. 面向3D打印的连续纤维增强复合材料结构拓扑优化设计. 硕士学位论文, 福建工程学院, 2023.
90 He Z, Tehrani M, Tamijani A Y. Computer Methods in Applied Mechanics and Engineering, 2022, 276, 106998.
91 Xu Yanan, Gao Y K, Wu C, et al. Computer Methods in Applied Mechanics and Engineering, 2022, 399, 115350.
92 Huang Y M, Tian X Y, Zheng Z Q, et al. Composite Structures, 2022, 285, 115241.
93 Li N Y, Link G D, Wang T, et al. Composites Part B: Engineering, 2020, 182, 107612.
94 Sugiyama K, Matsuzaki R, Malakhov A V, et al. Composites Science and Technology, 2020, 186, 107905.

[1]	李晨晓, 李俊生, 陈雨洁, 颜曼玲, 陈玉蓉, 万帆. 陶瓷材料熔融沉积3D打印研究进展[J]. 材料导报, 2025, 39(8): 24040242-10.
[2]	龙海洋, 徐鑫, 马占山, 贾志强, 刘泽宇, 余烁, 史海江, 王新, 贵永亮. 曲面激光熔覆的研究现状及发展趋势[J]. 材料导报, 2025, 39(18): 24080076-8.
[3]	马亚鹏, 翟文辉, 张东生, 朱涛, 杨秋宁, 毛明杰. 复合外加剂对3D打印砂浆流变与建造性的协同机制及孔结构研究[J]. 材料导报, 2025, 39(17): 25030044-8.
[4]	张大旺, 杨欢, 李辉. 3D打印建筑底层荷载的研究进展[J]. 材料导报, 2025, 39(16): 24060021-12.
[5]	张大旺, 许晓光, 李辉. 3D打印混凝土的长期性能研究进展[J]. 材料导报, 2025, 39(13): 24030165-13.
[6]	冯妍, 葛淑慧, 隗立颖, 闫建华. 3D打印无机非金属材料增强柔性器件的研究进展[J]. 材料导报, 2025, 39(1): 23100077-12.
[7]	刘超, 蒙毅升, 武怡文, 刘化威. 3D打印再生砂浆早期流变性能及结构经时演化研究[J]. 材料导报, 2024, 38(9): 22100157-8.
[8]	桂岩, 赵爽, 杨自春. 3D打印隔热材料研究进展[J]. 材料导报, 2024, 38(8): 22090104-11.
[9]	郑思铭, 李蔚, 杨函瑞, 陈松, 魏取福. 3D打印聚乳酸的改性研究与应用进展[J]. 材料导报, 2024, 38(8): 22100107-10.
[10]	吴思远, 单忠德, 陈恳, 刘丰, 刘晓军, 严春晖. 3D打印连续纤维增强树脂T型梁的弯曲性能[J]. 材料导报, 2024, 38(7): 22090150-7.
[11]	邱贺方, 侯笑晗, 郭晓辉, 崔帆帆, 侯根良, 张泽, 罗伟蓬, 袁晓静. 电弧增材制造薄壁件形状控制研究进展[J]. 材料导报, 2024, 38(6): 22080200-14.
[12]	柴媛欣, 邢飞, 李殿起, 史建军, 苗立国, 卞宏友, 闫成鑫. 金属材料激光增材制造路径规划研究现状与展望[J]. 材料导报, 2024, 38(4): 22060243-6.
[13]	唐振中, 贾鲁涛, 林永权, 吴捷, 张亚梅. 钨尾矿粉对水泥基3D打印混凝土流变、水化及力学性能的影响[J]. 材料导报, 2024, 38(21): 23060169-6.
[14]	周英伟, 樊玉鹏, 于瑞龙, 谭锐, 马月婷, 王鹏伟, 尹绍奎. 选择性激光烧结用聚合物复合材料的研究进展[J]. 材料导报, 2024, 38(19): 23020110-9.
[15]	郝舒琪, 苏海军, 赵迪, 李翔, 董栋, 于佳俊. 粉体特性对光固化3D打印陶瓷浆料性质影响的研究进展[J]. 材料导报, 2024, 38(17): 23060075-10.

[1]	JIN Qinglin, WANG Yang, CAO Lei, SONG Qunling. Effect of Nitriding in Mushy Zone on the Nitrogen Content and Solidification Transformation of Cr10Mn9Ni0.7 Alloy[J]. Materials Reports, 2018, 32(4): 579 -583 .
[2]	WANG Shengmin, ZHAO Xiaojun, HE Mingyi. Research Status and Development of Mechanical Plating[J]. Materials Reports, 2017, 31(5): 117 -122 .
[3]	HE Yuandong, SUN Changzhen, MAO Weiguo, MAO Yiqi, ZHANG Honglong, CHEN Yanfei, PEI Yongmao, FANG Daining. Measurement of Transverse Piezoelectric Coefficients of Pb(Zr_0.52Ti_0.48)O₃ Thin Films by a Mechano-electrical Multiphysics Coupling, Bulge Test Method[J]. Materials Reports, 2017, 31(15): 139 -144 .
[4]	TAO Lei, ZHENG Yunwu,DI Mingwei, ZHANG Yanhua, ZHENG Zhifeng. Preparation of Porous Carbon Nanofiber from Liquid Phenolic Resin and Its Characterization[J]. Materials Reports, 2017, 31(10): 101 -106 .
[5]	SU Lan, ZHANG Chubo, WANG Zhen, MI Zhenli. Finite Element Simulation of Electromagnetic Induction Heating in Hot Metal Gas Forming[J]. Materials Reports, 2017, 31(24): 182 -177 .
[6]	QI Yaping, LUO Faliang, WANG Kezhi, SHEN Zhiyuan, WU Xuejian, WANG Diran. Effect of TMC-300 on the Performance of PLLA/PPC Alloy[J]. Materials Reports, 2018, 32(10): 1672 -1677 .
[7]	LIU Huan, HUA Zhongsheng, HE Jiwen, TANG Zetao, ZHANG Weiwei, LYU Huihong. Indium Recovery from Waste Indium Tin Oxide: a Technological Review[J]. Materials Reports, 2018, 32(11): 1916 -1923 .
[8]	DU Min, SONG Dian, XIE Ling, ZHOU Yuxiang, LI Desheng, ZHU Jixin. Electrospinning in Rechargeable Ion Batteries for High Efficient Energy Storage[J]. Materials Reports, 2018, 32(19): 3281 -3294 .
[9]	LIU Xiao, XU Qian, LAI Guanghong, GUAN Jianan, XIA Chunlei, WANG Ziming, CUI Suping. Application Performances and Mechanism of Polycarboxylic Acid in Different Comb-bonded Structures in High-performance Concrete[J]. Materials Reports, 2018, 32(22): 4011 -4015 .
[10]	ZHANG Di, YANG Di, XU Cui, ZHOU Riyu, LI Hao, LI Jing, WANG Peng. Study on Mechanism of Highly Effective Adsorption of Bisphenol F by Reduced Graphene Oxide[J]. Materials Reports, 2019, 33(6): 954 -959 .

Viewed

Full text

Abstract

Cited

Shared

Discussed