Please wait a minute...
材料导报  2025, Vol. 39 Issue (14): 24070070-7    https://doi.org/10.11896/cldb.24070070
  金属与金属基复合材料 |
铜合金板材低电压螺柱喷涂304奥氏体不锈钢喷涂工艺及涂层性能研究
赵锡龙1,*, 曹泽宇1, 赵铭1, 王堃2
1 兰州交通大学材料科学与工程学院,兰州 730070
2 兰州交通大学土木工程学院,兰州 730070
Investigation on Spraying Process and Coating Property of 304 Austenitic Stainless Steel by Low Voltage Stud Spraying on Copper Alloy Plate
ZHAO Xilong1,*, CAO Zeyu1, ZHAO Ming1, WANG Kun2
1 School of Material Science and Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
2 School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
下载:  全 文 ( PDF ) ( 42375KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 低电压螺柱喷涂方法作为一种经济实用的喷涂技术,在航空航天、汽车制造和能源行业等领域具有广阔的应用潜力。采用低电压螺柱喷涂方法在铜合金板材表面进行不锈钢涂层制备。涂层宏观形貌表面整体光滑但局部区域呈现山脊状结构和微观裂纹,Cu/304奥氏体不锈钢界面处存在岛状和片状组织,两侧元素在界面处相互扩散。EDS和XRD结果表明涂层表面的微观结构主要由Fe、Cr、Ni和Cu组成。硬度测试结果表明该涂层中心区域显微硬度最高,且远高于铜板区域,约为502HV。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵锡龙
曹泽宇
赵铭
王堃
关键词:  低电压螺柱喷涂  涂层表面  涂层界面  硬度  显微组织    
Abstract: As an emerging, economical and practical spraying technology, the low-voltage stud spraying method has broad application potential in aerospace, automobile manufacturing and energy industries. Stainless steel coating is prepared on the surface of copper alloy sheet by low vol-tage stud spraying. The macroscopic morphology of the coating is smooth, but the local area shows ridge-like structure and micro-cracks. There is an islandand sheet structure at the interface of Cu/304 austenitic stainless steel, and the elements on both sides diffuse mutually at the interface. EDS and XRD results show that the microstructure of the coating surface is mainly composed of Fe, Cr, Ni and Cu. The microhardness test shows that the microhardness of the central area of the coating is the highest and much higher than that of the copper plate area, which is about 502HV.
Key words:  low voltage stud spraying    coating surface    coating interface    microhardness    microstructure
出版日期:  2025-07-25      发布日期:  2025-07-29
ZTFLH:  TG47  
基金资助: 甘肃省青年博士基金(2023QB-046)
通讯作者:  * 赵锡龙,博士,兰州交通大学材料科学与工程学院副教授、硕士研究生导师。目前主要从事焊接残余应力/变形测试及仿真,接头微区力学性能测试及断裂行为研究。zhaoxilong@mail.lzjtu.cn   
引用本文:    
赵锡龙, 曹泽宇, 赵铭, 王堃. 铜合金板材低电压螺柱喷涂304奥氏体不锈钢喷涂工艺及涂层性能研究[J]. 材料导报, 2025, 39(14): 24070070-7.
ZHAO Xilong, CAO Zeyu, ZHAO Ming, WANG Kun. Investigation on Spraying Process and Coating Property of 304 Austenitic Stainless Steel by Low Voltage Stud Spraying on Copper Alloy Plate. Materials Reports, 2025, 39(14): 24070070-7.
链接本文:  
https://www.mater-rep.com/CN/10.11896/cldb.24070070  或          https://www.mater-rep.com/CN/Y2025/V39/I14/24070070
1 Guo X, Xiao Z, Qiu W, et al. Materials Science and Engineering:A, 2019, 749, 281.
2 Lazar F S, Colin M, Carré G, et al. Molecules, 2023, 28(3), 981.
3 Azar G T P, Fox D, Fedutik Y, et al. Surface and Coatings Technology, 2020, 396, 125971.
4 Atay H Y, Uslu G, Kahmaz Y, et al. In:IOP Conference Series:Materials Science and Engineering, United Kingdom, 2020, pp.012018.
5 Onuike B, Heer B, Bandyopadhyay A. Additive Manufacturing, 2018, 21, 133.
6 Zhang M, Tian Y, Zheng X, et al. Materials, 2023, 16(3), 1065.
7 Strzńpek P, Zasadzińska M. Energies, 2022, 15(6), 2093.
8 Li J, Kuai Z, Li Z, et al. Metals, 2022, 12(5), 701.
9 Ning Y, Zhou M, Yang J. International Journal of Electrochemical Science, 2022, 17(9), 220931.
10 Romanov D A, Pochetukha V V, Sosnin K V, et al. Journal of Materials Research and Technology, 2022, 19, 947.
11 Liu Y, Xu T, Liu Y, et al. Journal of Materials Research and Technology, 2020, 9(4), 8283.
12 Cheng P, Li G, Xie W, et al. Journal of Materials Research and Technology, 2023, 27, 780.
13 Liu Y, Xu T, Li G. Coatings, 2022, 12(10), 1537.
14 Zhang C, Wang R, Hu R, et al. Materials Letters:X, 2022, 14, 100137.
15 Liu S, Sun Y, Zhai P, et al. Materials, 2023, 16(4), 1627.
16 Abdel-Karim A M, Ahmed Y M, El-Masry M M. Scientific Reports, 2023, 13(1), 19248
17 Gan Y X, Chang Y, Chen C C, et al. Coatings, 2022, 12(6), 798.
18 Xu W, Li G, Qu Y, et al. Materials Research Express, 2021, 8(12), 126520.
19 Mahale R S, Rajendrachari S, Vasanth S, et al. Biointerface Research in Applied Chemistry, 2022, 12(1), 1110.
20 Bai Y, Zhang J, Zhao C, et al. Materials Characterization, 2020, 167, 110489.
21 Xi T, Zhang X, Yin X, et al. Materials Science and Engineering:A, 2021, 805, 140571.
22 Zhukeshov A, Fermakhan K, Gabdullina A, et al. Materials Letters, 2021, 298, 130028.
23 Zhang D, Yin H, Bai W, et al. Journal of Manufacturing Processes, 2022, 82, 138.
24 Ashja M, Verdian M. Materials and Manufacturing Processes, 2017, 32(4), 383.
25 Hasegawa M. In:Treatise on process metallurgy, Ellingham diagram. Elsevier, Netherlands, 2014, pp. 507.
26 Nguyen T D, Sierra E, Eguriraun H, et al. European Journal of Physics A Journal of the European Physical Society, 2018, 39(4), 045803.
27 Lu J, Ma S Y, Wang X X, et al. Computational Materials Science, 2018, 143, 439.
28 Chen S, Huang J, Xia J, et al. Journal of Materials Processing Technology, 2015, 222, 43.
29 Shi R, Wang Y, Wang C, et al. Applied Physics Letters, 2011, 98(20), 204106.
30 Hembara O, Syrotyuk A, Chepil O, et al. Procedia Structural Integrity, 2024, 59, 190.
31 Rana R, Bleck W, Singh S, et al. Materials Science and Engineering:A, 2013, 588, 288.
32 Shibata K, Seo S J, Kaga M, et al. Materials Transactions, 2002, 43(3), 292.
33 Fang S M, Liu J, Ji H R. Yunnan Metallurgy, 2013, 42(5), 7 (in Chinese).
方树铭, 刘捷, 计汉容. 云南冶金, 2013, 42(5), 7.
[1] 脱锦鹏, 陈安琦, 姚富升, 徐俊杰, 李响, 董龙龙, 杨义. 颗粒增强耐热钛基复合材料设计制备研究进展[J]. 材料导报, 2025, 39(8): 24040119-10.
[2] 梅婷, 徐洪扬, 李逊, 龙运伟, 唐华, 李志鹏, 邹爱华. 柱塞泵关键摩擦副中复杂黄铜与硅锰黄铜的微观组织与耐磨特性研究[J]. 材料导报, 2025, 39(7): 24080117-5.
[3] 谭会杰, 王海燕, 华连庚, 高雪云, 吕萌, 于大威, 邢磊. 稀土Ce对Fe-Ni-Al马氏体时效钢等温过程显微组织演变的影响[J]. 材料导报, 2025, 39(7): 24010236-6.
[4] 姚通睿, 王曼, 席晓丽. 含Al耐热合金高温氧化行为研究现状[J]. 材料导报, 2025, 39(6): 24050040-10.
[5] 王森巍, 王丽, 王明庆, 佘加, 易嘉琰, 陈先华, 潘复生. Mg-xSc(x=0.5,1.0,3.0,5.0)生物医用合金组织与性能研究[J]. 材料导报, 2025, 39(5): 24090019-8.
[6] 卞宏友, 柳金生, 刘伟军, 张广泰, 姚佳彬, 邢飞. 激光沉积修复GH738/K417G合金时效热处理组织性能分析[J]. 材料导报, 2025, 39(3): 23110265-6.
[7] 冯殿远, 刘诗超, 王善林, 李欢欢, 洪敏, 涂文斌. 热处理对30CrMnSiNi2A钢电子束焊接头组织和性能的影响[J]. 材料导报, 2025, 39(14): 24040172-7.
[8] 胡少青, 岳赟, 平静艳, 邓四二, 杜三明. 不同氮气流量对等离子弧熔覆TiNx/Ti合金涂层微观组织及摩擦学性能的影响[J]. 材料导报, 2025, 39(14): 24070140-7.
[9] 苏子龙, 尹立孟, 陈玉华, 张鹤鹤, 张龙, 张丽萍. 稀土元素对微电子封装互连材料组织与性能的影响[J]. 材料导报, 2025, 39(12): 24030246-9.
[10] 薛云龙, 田康康, 刘虎林, 伍媛婷, 袁亮, 高中堂. 无钴共晶高熵合金研究进展[J]. 材料导报, 2025, 39(11): 24050218-10.
[11] 张建波, 沈琪飞, 尹宁康, 张晋涵, 刘敬萱. Ni/P质量比对Cu-Ni-P合金组织和性能的影响[J]. 材料导报, 2025, 39(10): 24030240-6.
[12] 马东帅, 闫二虎, 白金旺, 王豪, 张硕, 王艺豪, 李唐卫, 郭智洁, 周子锐, 邹勇进, 孙立贤. V-Ti-Fe三元合金显微组织、氢传输行为及耐蚀性能研究[J]. 材料导报, 2024, 38(8): 22110007-7.
[13] 朱本清, 余红发, 巩旭, 吴成友, 麻海燕. 除冰盐冻融作用下混凝土界面粘结强度与界面过渡区细观力学性能的关系[J]. 材料导报, 2024, 38(5): 22070190-7.
[14] 程立宏, 周裕琦, 王建峰, 李柱, 穆战, 占小红. 焊丝成分对国产Invar合金GTAW接头组织差异性的影响[J]. 材料导报, 2024, 38(23): 23080151-6.
[15] 毕广利, 冉吉上, 满宏生, 姜静, 孟帅举, 毕广阔, 王海东, 李元东. 挤压Mg-Y-Ni-Co合金的显微组织、加工性能及塑性变形行为[J]. 材料导报, 2024, 38(21): 23060144-8.
[1] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[2] LIU Shuaiyang, WANG Aiqin, LYU Shijing, TIAN Hanwei. Interfacial Properties and Further Processing of Cu/Al Laminated Composite: a Review[J]. Materials Reports, 2018, 32(5): 828 -835 .
[3] . Adhesion in SBS Modified Asphalt Containing Warm Mix Additive and
Aggregate System Based on Surface Free Theory[J]. Materials Reports, 2017, 31(4): 115 -120 .
[4] CAO Xiuzhong, ZHAO Bing, HAN Xiuquan, HOU Hongliang, QU Haitao. Research on Deformation Mechanism of SiC Fiber Reinforced Titanium Matrix Composites Subjected to High Temperature Axial Tension[J]. Materials Reports, 2017, 31(8): 88 -93 .
[5] ZHANG Jiaqing, ZHANG Bosi, WANG Liufang, FAN Minghao, XIE Hui, LI Wei. The State of the Art of Combustion Behavior of Live Wires and Cables[J]. Materials Reports, 2017, 31(15): 1 -9 .
[6] LI Xueyun, WANG Hezhong. Optimization and Characterization of TEMPO-Mediated Oxidization of Nanochitin Whiskers[J]. Materials Reports, 2018, 32(10): 1597 -1601 .
[7] LI Beigang, WANG Min. High Efficient Adsorption of Dyes by Fe/CTS/AFA Composite[J]. Materials Reports, 2018, 32(10): 1606 -1611 .
[8] ZHAO Qingchen, WANG Jinlong, ZHANG Yuanliang, SHEN Yihong, LIU Shujie. Fatigue Behavior and Fatigue Life for FV520B-I at Different Loading Frequencies[J]. Materials Reports, 2018, 32(16): 2837 -2841 .
[9] ZHOU Chao, WANG Hui, OUYANG Liuzhang, ZHU Min. The State of the Art of Hydrogen Storage Materials for High-pressure Hybrid Hydrogen Vessel[J]. Materials Reports, 2019, 33(1): 117 -126 .
[10] WANG Huifen, LIU Gang, CAO Kangli, YANG Biqi, XU Jun, LAN Shaofei, ZHANG Lixin. Development Status of Carbon Nanotube Materials and Their Application Prospects in Spacecraft[J]. Materials Reports, 2019, 33(z1): 78 -83 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed