Please wait a minute...
材料导报  2024, Vol. 38 Issue (3): 22070007-14    https://doi.org/10.11896/cldb.22070007
  高分子与聚合物基复合材料 |
聚氨酯泡沫注浆修复材料泡孔结构特征及抗压性能研究进展
张超1,2,3,†, 潘旺1,†, 方宏远1,2,4,*, 王娟1,*, 王翠霞1,2, 杜明瑞1,2,3, 赵鹏1,2,3,4, 王磊1,5, 王复明1,2,4
1 郑州大学水利与交通学院,黄河实验室(郑州大学),地下工程研究院,重大基础设施检测修复国家地方联合工程实验室,地下工程灾变防控省部共建协同创新中心,郑州 450001
2 坝道工程医院(平舆),河南 驻马店 463400
3 郑州安源工程技术有限公司,郑州 450001
4 南方工程检测修复技术研究院,广东 惠州 516029
5 万华节能科技集团股份有限公司,山东 烟台 264006
Research Progress of the Cell Structure Characteristics and Compressive Properties of Polyurethane Foam Grouting Rehabilitation Materials
ZHANG Chao1,2,3,†, PAN Wang1,†, FANG Hongyuan1,2,4,*, WANG Juan1,*, WANG Cuixia1, DU Mingrui1, ZHAO Peng1,2,3,4, WANG Lei1,5, WANG Fuming1,2,4
1 School of Water Conservancy and Transportation,Yellow River Laboratory,Underground Engineering Research Institute,National Local Joint Engineering Laboratory of Major Infrastructure Testing and Rehabilitation Technology,Collaborative Innovation Center for Disaster Prevention and Control of Underground Engineering Jointly Built by Provinces and Ministries, Zhengzhou University, Zhengzhou 450001, China
2 BeSTDR Infrastructure Hospital(Pingyu), Zhumadian 463400, Henan, China
3 SAFEKEY Engineering Technology (Zhengzhou) Co., Ltd., Zhengzhou 450001, China
4 Southern Institute of Infrastructure Testing and Rehabilitation Technology, Huizhou 516029, Guangdong, China
5 Wanhua Energysav Science & Technology Group Co., Ltd., Yantai 264006, Shandong, China
下载:  全 文 ( PDF ) ( 37721KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 聚氨酯泡沫(PUF)注浆修复材料以轻质高强、快凝高膨胀等优势,在基础设施修复加固领域得到了广泛的应用。抗压性能是工程修复材料十分重要的力学指标之一,而材料的微观结构对其宏观力学行为有决定性影响。近年来,国内外专家学者对PUF注浆修复材料的微观结构特性和抗压性能进行了大量研究,但尚未见到系统性总结。本文介绍了PUF注浆修复材料的定义及反应过程,综述了其微观泡孔结构特性、压缩应力-应变关系和本构模型,从宏微观角度讨论了其变形和破坏机理,总结了密度、试件尺寸、应变率和特殊环境工况对压缩性能的影响机理及规律,最后展望了PUF注浆修复材料未来的研究方向。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张超
潘旺
方宏远
王娟
王翠霞
杜明瑞
赵鹏
王磊
王复明
关键词:  聚氨酯泡沫  注浆  微观结构  本构模型  抗压性能    
Abstract: Polyurethane foam (PUF) grouting rehabilitation materials are widely used in the field of infrastructure repair and reinforcement with the advantages of light weight, high strength, fast setting and high expansion. Compression resistance is one of the most important mechanical indexes of materials, and its microstructural characteristics determine the macro-mechanical behavior. In recent years, experts and scholars at home and abroad have conducted a lot of research on the microstructural properties and compressive properties of PUF grouting rehabilitation materials. However, a systematic summary has not been seen yet. This paper introduces the definition and reaction mechanism of PUF grouting rehabilitation materials, reviews their microscopic cell structural properties, compressive stress-strain relationships and constitutive models, discusses their deformation and damage mechanisms from macro and micro perspectives, and summarizes the mechanisms and laws of density, specimen size, strain rate and special environmental working conditions on the compressive properties. Finally, the future research directions of PUF grouting rehabilitation materials are prospected.
Key words:  polyurethane foam    grouting    microstructure    constitutive model    compression performance
出版日期:  2024-02-10      发布日期:  2024-02-19
ZTFLH:  U418.5  
基金资助: 国家自然科学基金(51978630;52178368;51909242;52179145;52009125);河南省高校科技创新团队和人才培养计划(23IRTSTHN004;23HASTIT007);广东省引进创新创业团队计划(HG-GCKY-01-002);中国博士后基金(2020TQ0285);河南省博士后科研项目启动资助(202001016);河南省高等学校重点科研项目(21A570007)
通讯作者:  *方宏远,郑州大学水利与交通学院、黄河实验室(郑州大学)、地下工程研究院教授、博士研究生导师,教育部青年长江学者。2005年郑州大学环境工程专业本科毕业,2008年郑州大学道路与铁道工程专业硕士毕业,2012年大连理工大学结构工程博士毕业,2012年到郑州大学工作至今。长期从事地下管道等基础工程设施无损检测和非开挖修复理论与技术研究,发表SCI、EI论文100余篇,申请和授权发明专利97项(包含美国发明专利17项),参编1项国家职业技能标准、2项行业标准和5项团体标准。fanghongyuan1982@163.com;
王娟,郑州大学水利与交通学院、黄河实验室(郑州大学)、地下工程研究院教授、博士研究生导师。2002年郑州大学城镇建设专业本科毕业,2005年郑州大学水工结构工程专业硕士毕业,2011年清华大学水利工程专业博士毕业,2011年7月入职郑州大学至今,主要从事水工结构及材料方面的研究工作。发表学术论文50余篇,包括Ceramics International、Journal of Cleaner Production、Construction and Building Materials、《水利学报》等,出版学术专著2部,申请和授权国家发明专利30余项。wangjuan@zzu.edu.cn   
作者简介:  张超,郑州大学水利与交通学院、黄河实验室(郑州大学)、地下工程研究院副教授、博士研究生导师。2008年西北农林科技大学土木工程专业本科毕业,2011年西北农林科技大学结构工程专业硕士毕业,2018年德国魏玛包豪斯大学结构工程博士毕业,2019年到郑州大学工作至今。目前主要从事工程修复材料的多尺度物理力学性能与提升和先进结构材料的设计与应用等方面的研究工作。发表论文60余篇,包括Composite part B: Engineering、Engineering Geology、Nanoscale、Construction and Building Materials、《中国公路学报》《岩土力学》等,申请和授权专利20余项,参编行业和地区标准3项。潘旺,2020年7月于郑州大学获得工学学士学位。现为郑州大学水利与交通学院硕士研究生,在王复明院士、方宏远教授和张超副教授的指导下进行研究。目前主要研究领域为高聚物注浆材料动静态力学性能。发表SCI、EI论文5篇,申请发明专利2项。†共同第一作者
引用本文:    
张超, 潘旺, 方宏远, 王娟, 王翠霞, 杜明瑞, 赵鹏, 王磊, 王复明. 聚氨酯泡沫注浆修复材料泡孔结构特征及抗压性能研究进展[J]. 材料导报, 2024, 38(3): 22070007-14.
ZHANG Chao, PAN Wang, FANG Hongyuan, WANG Juan, WANG Cuixia, DU Mingrui, ZHAO Peng, WANG Lei, WANG Fuming. Research Progress of the Cell Structure Characteristics and Compressive Properties of Polyurethane Foam Grouting Rehabilitation Materials. Materials Reports, 2024, 38(3): 22070007-14.
链接本文:  
https://www.mater-rep.com/CN/10.11896/cldb.22070007  或          https://www.mater-rep.com/CN/Y2024/V38/I3/22070007
1 Pan W, Han Y B, Wang Z J, et al. Construction and Building Mate-rials, 2023, 408, 133795.
2 Pan W, Zhang C, Wang C, et al. International Journal of Fatigue, 2023, 171, 107593.
3 Guo C C, Guo Z F, Ma H H, et al. Tunnel Construction, 2021, 41(8), 1315(in Chinese).
郭成超, 郭铸锋, 马会环, 等. 隧道建设, 2021, 41(8), 1315.
4 Xu X X, Zeng Q S, Li D, et al. Engineering Geology, 2010, 111(1-4), 31.
5 Wang G. Research on application of cement concrete pavement slabs empty of polyurethane foam void treatment. Master's Thesis, Southeast University, China, 2015 (in Chinese).
王革. 聚氨酯发泡材料处治水泥混凝土路面板底脱空的应用研究. 硕士学位论文, 东南大学, 2015.
6 Wang J R, Zhang H B, Zhu Y, et al. Construction and Building Mate-rials, 2022, 319, 126105.
7 Somarathna H M C C, Raman S N, Mohotti D, et al. Construction and Building Materials, 2018, 190, 995.
8 Du M R. Mechanical properties of the carbon nanotubes enhanced cement-based grout and the microscopic mechanism. Ph. D. Thesis, China University of Mining and Technology, China, 2018 (in Chinese).
杜明瑞. 碳纳米管增强水泥基注浆材料力学特性及其微观作用机理. 博士学位论文, 中国矿业大学, 2018.
9 Zhou M R, Peng X X, Su B T, et al. Bulletin of the Chinese Ceramic Society, 2017, 36(5), 1673(in Chinese).
周茗如, 彭新新, 苏波涛, 等. 硅酸盐通报, 2017, 36(5), 1673.
10 Chen X M, Zhou T, Zhou J J, et al. Mining Safety & Environmental Protection, 2023, 50(2), 40(in Chinese).
陈星明, 周亭, 周家家, 等. 矿业安全与环保, 2023, 50(2), 40.
11 Zhang J P, Liu L M, Liu C X, et al. Rock and Soil Mechanics, 2020, 41(11), 3651(in Chinese).
张进鹏, 刘立民, 刘传孝, 等. 岩土力学, 2020, 41(11), 3651.
12 Li X L, Han X L, Li Y L, et al. Mining Research and Development, 2021, 41(9), 108(in Chinese).
李鑫磊, 韩晓龙, 李永利, 等. 矿业研究与开发, 2021, 41(9), 108.
13 Hao M M, Li X L, Wang X L, et al. Journal of Wuhan University of Technology-Materials Science Edition, 2021, 36(2), 297.
14 Yang D Y. Research on highway asphalt pavement inner disease quick maintenance of high polymer grouting and application. Master's Thesis, Wuhan Institute of Technology, China, 2015 (in Chinese).
杨冬韵. 高聚物注浆在高速公路沥青路面内部病害快速修复中的应用研究. 硕士学位论文, 武汉工程大学, 2015.
15 Li M J, Du M R, Wang F M, et al. Construction and Building Materials, 2020, 259, 119797.
16 Wang F M, Shi M S, Li H J, et al. Advanced Materials Research, 2011, 284-286, 1952.
17 Zhang X J, Wang C J, Tian H, et al. China Building Waterproofing, 2021(3), 47 (in Chinese).
张曦君, 王超杰, 田晗, 等. 中国建筑防水, 2021(3), 47.
18 Bae A, Jung E, Seo B, et al. Journal of Testing and Evaluation, 2022, 50(1), 20210003.
19 Li M. Research on testing device and test of expansion force of polyurethane polymer. Master's Thesis, Hefei University of Technology, China, 2018 (in Chinese).
李旻. 聚氨酯高聚物膨胀力检测装置及试验的研究. 硕士学位论文, 合肥工业大学, 2018.
20 Zheng X G. China Railway Science, 2017, 38(1), 9 (in Chinese).
郑新国. 中国铁道科学, 2017, 38(1), 9.
21 Cui C, Guo C C, Lu Q, et al. Journal of Transportation Engineering Part B: Pavements, 2021, 147(3), 4021030.
22 Bian X C, Duan X, Li W, et al. Transportation Geotechnics, 2021, 26, 100381.
23 Wei Y, Wang F M, Gao X, et al. Journal of Materials in Civil Enginee-ring, 2017, 29(9), 4017101.
24 Jiang Y, Guo F, Kong H, et al. New Chemical Materials, 2022, 50(1), 282(in Chinese).
姜瑜, 郭飞, 孔恒, 等. 化工新型材料, 2022, 50(1), 282.
25 Liu Y. Experimental study on the common properties of polyurethane polymer materials and polymer concrete. Master's Thesis, Zhengzhou University, China, 2009 (in Chinese).
刘勇. 聚氨酯高聚物材料及其混凝土常用性能试验研究. 硕士学位论文, 郑州大学, 2009.
26 Pan W, Xia Y Y, Zhang C, et al. Materials Reports, 2023, 37(15), 22020115(in Chinese).
潘旺, 夏洋洋, 张超, 等. 材料导报, 2023, 37(15), 22020115.
27 Wang F M, Li J, Shi M S, et al. Journal of Hydroelectric Engineering, 2016, 35(12), 1 (in Chinese).
王复明, 李嘉, 石明生, 等. 水力发电学报, 2016, 35(12), 1.
28 Wang F M, Fan Y F, Guo C C. Journal of Hydroelectric Engineering, 2018, 37(10), 1(in Chinese).
王复明, 范永丰, 郭成超. 水力发电学报, 2018, 37(10), 1.
29 Li B, Wang F M, Fang H Y, et al. Tunnelling and Underground Space Technology, 2021, 113, 103842.
30 Liu D J, Wang F, Hu Q F, et al. Tunnelling and Underground Space Technology, 2020, 103, 103471.
31 Guo C C, Cui C, Wang F M. Journal of Materials in Civil Engineering, 2020, 32(7), 5020006.
32 Pan W, Wang C X, Zhang C, et al. Journal of Materials Research and Technology, 2023, 27, 4521.
33 Lin S L, Luo Z H, Chen D Q, et al. Materials Reports, 2021, 35(1), 1196 (in Chinese).
林绍铃, 罗祖获, 陈丹青, 等. 材料导报, 2021, 35(1), 1196.
34 Zhang B, Wang B L, Zhong Y H, et al. Advances in Polymer Technology, 2021, 2021, 1.
35 Ran Z R. Study on the exothermic properties of low exothermic polymer grouting materials. Master's Thesis, Zhengzhou University, China, 2020(in Chinese).
冉中瑞. 低放热高聚物注浆材料放热特性研究. 硕士学位论文, 郑州大学, 2020.
36 Liu Z. The preparation and properties of polyurethane for sealing and fil-ling in coal mine. Master's Thesis, Hefei University of Technology, China, 2012 (in Chinese).
刘志. 煤矿用聚氨酯密闭填充堵水材料的制备及性能研究. 硕士学位论文, 合肥工业大学, 2012.
37 Yu Z S. Experimental study on mechanical properties of non-foaming polymer grouting materials. Master's Thesis, Zhengzhou University, China, 2020(in Chinese).
余自森. 不发泡型高聚物注浆材料力学特性试验研究. 硕士学位论文, 郑州大学, 2020.
38 Yu J K. Chemical Propellants & Polymeric Materials, 2016, 14(5), 13(in Chinese).
于剑昆. 化学推进剂与高分子材料, 2016, 14(5), 13.
39 Wang J, Li X, Wang C X, et al. Construction and Building Materials, 2021, 300, 124223.
40 Fang H Y, Zhao P, Zhang C, et al. Construction and Building Mate-rials, 2022, 318, 125951.
41 Gao X, Huang W, Wei Y, et al. Acta Materiae Compositae Sinica, 2017, 34(2), 438(in Chinese).
高翔, 黄卫, 魏亚, 等. 复合材料学报, 2017, 34(2), 438.
42 Lu Z X, Li H X, Tian C J. Polymer Materials Science & Engineering, 1995(2), 86(in Chinese).
卢子兴, 李怀祥, 田常津. 高分子材料科学与工程, 1995(2), 86.
43 Lu Z X, Tian C J, Xie R Z. Chinese Journal of Materials Research, 1994(5), 452(in Chinese).
卢子兴, 田常津, 谢若泽. 材料研究学报, 1994(5), 452.
44 Liu K, Liang W, Ren F M, et al. Construction and Building Materials, 2019, 206, 270.
45 Wang J, Li X, Fang H Y, et al. Advances in Civil Engineering, 2020, 2020, 1.
46 Li X. Microstructure and mechanical properties of crushed-stone-reinforced polymer composites. Master's Thesis, Zhengzhou University, China, 2021(in Chinese).
李迅. 碎石增强高聚物复合材料的微观结构及力学性能. 硕士学位论文, 郑州大学, 2021.
47 Li X, Wang J, Fang H Y. Construction and Building Materials, 2022, 325, 126829.
48 Marvi-Mashhadi M, Lopes C S, Llorca J. Journal of the Mechanics and Physics of Solids, 2020, 135, 103814.
49 Wang J, Wang H J, Xu Y Q, et al. Journal of Zhengzhou University(Engineering Science), 2018, 39(1), 12(in Chinese).
王娟, 王会娟, 许耀群, 等. 郑州大学学报(工学版), 2018, 39(1), 12.
50 Wang J, Li Q B, Qing L B, et al. Engineering Mechanics, 2012, 29(12), 1(in Chinese).
王娟, 李庆斌, 卿龙邦, 等. 工程力学, 2012, 29(12), 1.
51 Vsmits G F. Journal of Building Physics, 1994, 17(4), 309.
52 Hu S S, Liu J F, Wang W, et al. Chinese Journal of Theoretical and Applied Mechanics, 1998(2), 23(in Chinese).
胡时胜, 刘剑飞, 王梧, 等. 力学学报, 1998(2), 23.
53 Lin Y L, Lu F Y, Wang X Y, et al. Chinese Journal of High Pressure Physics, 2006(1), 88(in Chinese).
林玉亮, 卢芳云, 王晓燕, 等. 高压物理学报, 2006(1), 88.
54 Xu S J. Study on mechanical properties of low-exothermic polyurethane grouting material. Master's Thesis, Zhengzhou University, China, 2020(in Chinese).
许胜捷. 低放热高聚物注浆材料力学特性研究. 硕士学位论文, 郑州大学, 2020.
55 Xu S J, Wang S J, Zhong Y H, et al. Advances in Civil Engineering, 2020, 2020, 1.
56 Wang Z Y, Du M R, Fang H Y, et al. Construction and Building Mate-rials, 2021, 301, 124092.
57 Fang H Y, Zheng Q K, Du M R, et al. Journal of Applied Polymer Science, 2022, 139(22), 52276.
58 Fan J Q, Dong H X, Gao Y H, et al. Journal of Building Materials, 2012, 15(3), 356(in Chinese).
范俊奇, 董宏晓, 高永红, 等. 建筑材料学报, 2012, 15(3), 356.
59 Li X X, Wan J C, Zheng D, et al. Construction and Building Materials, 2022, 332, 127308.
60 Chen W H, Liu J F, Peng J H, et al. Journal of Experimental Mecha-nics, 1997(2), 28(in Chinese).
陈网桦, 刘建飞, 彭金华, 等. 实验力学, 1997(2), 28.
61 Avalle M, Belingardi G, Ibba A. International Journal of Impact Engineering, 2007, 34(1), 3.
62 Gibson L J, Ashby M F. Cellular solids : structure and properties, Cambridge University Press, UK, 1997, pp. 528.
63 Kim T, Shin J K, Goh T S, et al. Composite Structures, 2017, 180, 686.
64 Qu J, Xu L, Li Z J, et al. Machine Design and Manufacturing Enginee-ring, 2019, 48(3), 89(in Chinese).
曲杰, 徐梁, 李治均, 等. 机械设计与制造工程, 2019, 48(3), 89.
65 Rusch K C. Journal of Applied Polymer Science, 1970, 14(5), 1263.
66 Wang B X, Wang F, Wang Q. Construction and Building Materials, 2018, 173, 332.
67 Huang S B, Liu Q S, Cheng A P, et al. Cold Regions Science and Technology, 2018, 145, 142.
68 Du M R, Wang Z Y, Fang H Y, et al. Reviews on Advanced Materials Science, 2022, 61(1), 350.
69 Shi M S, Wang F M, Luo J. Journal of Wuhan University of Technology-Materials Science Edition, 2010, 25(6), 962.
70 Zheng X G, Li S M, Xie Y J, et al. Journal of Wuhan University of Technology, 2014, 36(4), 44(in Chinese).
郑新国, 李书明, 谢永江, 等. 武汉理工大学学报, 2014, 36(4), 44.
71 Cheng G Y, Huang X D, Hou D W, et al. Journal of Civil Aviation University of China, 2017, 35(1), 32(in Chinese).
程国勇, 黄旭栋, 侯栋文, 等. 中国民航大学学报, 2017, 35(1), 32.
72 Meng M L, Wang F M. Highway, 2015, 60(7), 251(in Chinese).
孟美丽, 王复明. 公路, 2015, 60(7), 251.
73 Lu Z X, Huang Z P, Wang R. Chinese Journal of Applied Mechanics, 1996(2), 8(in Chinese).
卢子兴, 黄筑平, 王仁. 应用力学学报, 1996(2), 8.
74 Lee S H, Lee S J, Park J G, et al. Construction and Building Materials, 2017, 145, 117.
75 Xiao Y, Stuedlein A W, Chen Q S, et al. Journal of Geotechnical and Geoenvironmental Engineering, 2018, 144(2), 04017108.
76 Liu K, Li Y, Wang F, et al. Journal of Materials in Civil Engineering, 2019, 31(3), 04019007.
77 Scucka J, Martinec P, Soucek K. Geotechnical Testing Journal, 2015, 38(2), 20140100.
78 Fang H, Yu Z S, Wang J, et al. Construction and Building Materials, 2021, 271, 121517.
79 Zhang M. Experiment research on road performance of polyurethane foam concrete. Master's Thesis, Southeast University, China, 2016 (in Chinese).
张猛. 发泡型高聚物混凝土的路用性能试验研究. 硕士学位论文, 东南大学, 2016.
80 Lu L. Study on structure and properties of polymer and its composite mixture. Master's Thesis, Hefei University of Technology, China, 2017 (in Chinese).
卢林. 高聚物及其复合混合料结构与性能研究. 硕士学位论文, 合肥工业大学, 2017.
81 Wang J, Fang H Y, Yu Z S, et al. Journal of Building Materials, 2019, 22(2), 320(in Chinese).
王娟, 方宏远, 余自森, 等. 建筑材料学报, 2019, 22(2), 320.
82 Zhou H Y, Wang Y B, Wang X J, et al. Materials Reports, 2021, 35(18), 18076(in Chinese).
周宏元, 王业斌, 王小娟, 等. 材料导报, 2021, 35(18), 18076.
83 Jiang S Y, Tao S, Yao W L, et al. Materials Reports, 2017, 31(24), 161(in Chinese).
江世永, 陶帅, 姚未来, 等. 材料导报, 2017, 31(24), 161.
84 Tong S M, Zhang Y, Yang L Q, et al. Western China Communications Science & Technology, 2015(11), 17(in Chinese).
童水明, 张燕, 杨丽权, 等. 西部交通科技, 2015(11), 17.
85 Valentino R, Romeo E, Stevanoni D. Mechanics of Materials, 2014, 71, 101.
86 Hu Z H. Experimental study on mechanical properties of polymer grouting materials in seasonal freezing zone. Master's Thesis, Zhengzhou University, China, 2019(in Chinese).
胡郑壕. 季冻区高聚物注浆材料力学性能试验研究. 硕士学位论文, 郑州大学, 2019.
87 Li Y D, Li J J, Chen D D, et al. Chinese Journal of Geotechnical Engineering, 2016, 38(z1), 83(in Chinese).
李雅迪, 李嘉晋, 陈丁丁, 等. 岩土工程学报, 2016, 38(z1), 83.
88 Feng Z Q, Kang H P, Han G Q, et al. Chinese Journal of Geotechnical Engineering, 2013, 35(8), 1559(in Chinese).
冯志强, 康红普, 韩国强. 岩土工程学报, 2013, 35(8), 1559.
89 Zhang B, Wang B L, Zhong Y H, et al. Construction and Building Materials, 2021, 294, 123390.
90 Liu J Y. Study on the effects of snow melting salt and acid-base on the mechanical properties of polymer grouting materials. Master's Thesis, Zhengzhou University, China, 2021(in Chinese).
刘剑阳. 融雪盐及酸碱对高聚物注浆材料力学特性影响研究. 硕士学位论文, 郑州大学, 2021.
91 Ren B H, Shen J J, Liu W T, et al. Shock and Vibration, 2021, 2021, 1.
92 Zhang Y. Study on the effect of freeze-thaw cycles on the mechanical properties of low-exothermic polyurethane grouting materials. Master's Thesis, Zhengzhou University, China, 2021(in Chinese).
张玥. 冻融循环对低放热高聚物注浆材料力学特性影响研究. 硕士学位论文, 郑州大学, 2021.
93 Fang H Y, Su Y J, Du X M, et al. Applied Sciences, 2019, 9(21), 4496.
94 Pan Y Q, Zhan C M, Li K, et al. New Building Materials, 2021, 48(2), 114(in Chinese).
潘友强, 詹从明, 李款, 等. 新型建筑材料, 2021, 48(2), 114.
95 Han S H, Lv Z H, Liu Y J. Journal of Experimental Mechanics, 2010, 25(1), 55(in Chinese).
韩守红, 吕振华, 刘永进. 实验力学, 2010, 25(1), 55.
96 Liu Z Y. Experimental study of engineering properties of polymer grouting materials. Master's Thesis, Zhengzhou University, China, 2007(in Chinese).
刘志远. 高聚物注浆材料工程特性的试验研究. 硕士学位论文, 郑州大学, 2007.
97 Lu Z X, Tian C J, Han M B, et al. Explosion and Shock Waves, 1995(4), 382(in Chinese).
卢子兴, 田常津, 韩铭宝, 等. 爆炸与冲击, 1995(4), 382.
98 Zhao N, Wang S L, Quan X Y, et al. Ocean Engineering, 2021, 238, 109734.
99 Wang R J, Zhang Q J, Li Y. Construction and Building Materials, 2022, 319, 126045.
100 Yuan Y, Zhao R D, Li R, et al. Construction and Building Materials, 2020, 250, 118831.
101 Zhao H, Zhong Y H, Gao D P, et al. Highways & Transportation in Inner Mongolia, 2021(6), 1(in Chinese).
赵含, 钟燕辉, 高大鹏, 等. 内蒙古公路与运输, 2021(6), 1.
[1] 宋少龙, 王晓地, 张哲, 任学冲, 栾本利. 高熵合金高周和低周疲劳行为研究进展[J]. 材料导报, 2025, 39(3): 23100148-12.
[2] 冯超, 杨子帆, 刘曰利. SnBiAg无铅钎料恒温激光焊接的数值模拟与实验研究[J]. 材料导报, 2025, 39(3): 24010216-6.
[3] 敬彬, 胡文军, 陶俊林. Taylor撞击实验及其应用研究进展[J]. 材料导报, 2025, 39(2): 23100210-10.
[4] 李冲, 晏阳阳, 杨祯彧, 宋德军, 胡伟民, 杨胜利, 田世伟, 江海涛. TA24合金多道次热变形行为及管材制备仿真[J]. 材料导报, 2025, 39(2): 23120078-7.
[5] 应敬伟, 苏飞鸣, 席晓莹, 刘剑辉. 石墨烯纳米片增强水泥砂浆的抗氯离子扩散和抗硫酸盐侵蚀性能[J]. 材料导报, 2024, 38(9): 22090282-9.
[6] 左志东, 刘先斌, 刘吉波, 汪小锋, 陈剑斌. 汽车用2024-T351铝合金的动态力学行为各向异性[J]. 材料导报, 2024, 38(8): 22080196-9.
[7] 于凯, 王静静, 刘平, 马迅, 张柯, 马凤仓, 李伟. 二硫化钼自润滑涂层性能及制备工艺的研究进展[J]. 材料导报, 2024, 38(7): 22080088-10.
[8] 郑琨鹏, 葛好升, 李正川, 刘贵应, 田光文, 王万值, 徐国华, 孙振平. 河砂与石英砂对蒸养超高性能混凝土(UHPC)性能的影响及机理[J]. 材料导报, 2024, 38(7): 22040216-6.
[9] 罗树琼, 葛亚丽, 潘崇根, 袁盛, 杨雷. 微波活化粉煤灰的微观结构及粉煤灰-水泥浆体的早期性能[J]. 材料导报, 2024, 38(7): 22090256-6.
[10] 孙涛, 王辉, 张蕾, 刘晓英, 赵宏刚, 蒋伟, 成鑫磊, 何小涌. 基于折减因子的奥氏体不锈钢螺栓高温应力-应变模型[J]. 材料导报, 2024, 38(5): 23080049-9.
[11] 吕炎, 白二雷, 王志航, 夏伟. 低温养护对环氧树脂基砂浆早期性能的影响及机理[J]. 材料导报, 2024, 38(5): 23080222-6.
[12] 陈立俊, 李滢, 陈文浩. 再生微粉与矿物掺合料对混凝土力学性能及微观结构的影响[J]. 材料导报, 2024, 38(5): 22070218-6.
[13] 刘宜娜, 杨荣杰, 冯文静, 王坤, 欧良, 陈兆恒, 陈昱隆. 聚氨酯软质泡沫制品阻燃性能检测分析[J]. 材料导报, 2024, 38(3): 22060066-4.
[14] 刘开强, 于骏杰, 王海平, 张夏雨, 金诚, 张兴国. 地层渗流水对凝固过程固井水泥浆的侵扰机理[J]. 材料导报, 2024, 38(24): 23070062-6.
[15] 张建伟, 李智睿, 曹克磊, 陈磊, 赵江雨. 某水库粉质粘土渗透特性及微观机理研究[J]. 材料导报, 2024, 38(24): 23090129-8.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed