材料导报 2021, Vol. 35 Issue (z2): 558-563
高分子与聚合物基复合材料
|
碳纤维增强环氧树脂复合材料力学性能影响因素的研究进展
罗锐祺, 刘勇琼, 廖英强, 周剑
西安航天复合材料研究所,西安 710025
Research Progress on the Influencing Factors of Mechanical Properties of Carbon Fiber Reinforced Epoxy Resin Composites
LUO Ruiqi, LIU Yongqiong, LIAO Yingqiang, ZHOU Jian
Xi'an Institute of Aerospace Composites, Xi'an 710025,China
摘要 碳纤维增强树脂基复合材料虽然力学性能优良,但因其制作工艺复杂等原因,存在较多影响力学性能的相关因素。将所有针对碳纤维增强复合材料力学性能的影响因素划分为复合材料结构与成分、复合材料制备工艺、复合材料湿热服役环境三个方面,并对影响碳纤维增强复合材料的方面,分别阐述了每一方面对碳纤维增强复合材料力学性能的影响原理、具体的力学性能,且提出了提升碳纤维复合材料力学性能的方法。
关键词:
碳纤维
复合材料
力学性能
Abstract: Carbon fiber reinforced resin matrix composites have excellent mechanical properties. Due to the complicated manufacturing process, there are many related factors affecting mechanical properties. All the influence factors of carbon fiber reinforced composite materials mechanics performance are divided into three aspects:composite material composition and structure, composite materials preparation technology,the preparation process of composite material served hot and humid environment. The principle and specific mechanical properties on the mechanical prope-rties of each aspect of influencing carbon fiber reinforced composite materials are expounded respectively. And the methods to improve the mechanical properties of carbon fiber reinforced composites are put forward.
Key words:
carbon fiber
composites
mechanical property
发布日期: 2021-12-09
通讯作者:
1299903713@qq.com
作者简介: 罗锐祺,2019年6月毕业于山东大学,获得工学学士学位。现为西安航天复合材料研究所硕士研究生,在廖英强研究员的指导下进行研究。目前主要研究领域为复合材料力学性能。
引用本文:
罗锐祺, 刘勇琼, 廖英强, 周剑. 碳纤维增强环氧树脂复合材料力学性能影响因素的研究进展[J]. 材料导报, 2021, 35(z2): 558-563.
LUO Ruiqi, LIU Yongqiong, LIAO Yingqiang, ZHOU Jian. Research Progress on the Influencing Factors of Mechanical Properties of Carbon Fiber Reinforced Epoxy Resin Composites. Materials Reports, 2021, 35(z2): 558-563.
链接本文:
http://www.mater-rep.com/CN/
或
http://www.mater-rep.com/CN/Y2021/V35/Iz2/558
1 岳进. 纳米颗粒增韧碳纤维/CBT复合材料层合板力学性能研究. 硕士学位论文, 哈尔滨工程大学, 2015. 2 Muralidhara B, Babu S, Suresha B.Materials Today: Proceedings , 2020, 22(4), 1755. 3 Muralidhara B, Babu S, Suresha B.Materials Today: Proceedings , 2020, 27(3), 2022. 4 益小苏, 许亚洪, 程群峰, 等. 材料研究学报, 2008, 22(4), 337. 5 Fu Y, Zhou H, Zhou L. Composites Science and Technology , 2021, 207, 108711. 6 Feng P, Song G, Li X, et al. Journal of Colloid and Interface Science , 2021, 583, 13. 7 Gude M R, Prolongo S G, Urena A.Surface and Coatings Technology , 2012, 207, 602. 8 Brunbauer J, Stadler H, Pinter G.International Journal of Fatigue , 2015, 70, 85. 9 张阿樱, 张东兴. 哈尔滨工程大学学报, 2013, 34(3), 389. 10 陈霏. 孔隙影响碳纤维复合材料层合板力学性能研究. 硕士学位论文, 大连理工大学, 2016. 11 Hernandez S, Sket F, Gonzalez C, et al. Composites Science & Technology , 2013, 85, 73. 12 施旗, 关洪涛, 李秋岑, 等. 玻璃纤维, 2020, 294(4), 5. 13 Maragoni L, Modenato G, Rossi N D, et al.Composites Part B: Enginee-ring , 2020, 199, 108282. 14 徐鹏, 顾轶卓, 吴臣君,等. 玻璃钢/复合材料, 2019, 302(3), 51. 15 Eun J H, Dong H K, Lee J S. Composites Part A: Applied Science and Manufacturing , 2020, 137, 105987. 16 Chen S, Feng J.Composites Science & Technology , 2014, 101, 145. 17 Bisht A, Dasgupta K, Lahiri D.Composites Part A: Applied Science and Manufacturing , 2019, 126, 105601. 18 Xiao C, Tan Y, Wang X, et al. Chemical Physics Letters , 2018, 703, 8. 19 吴宝昌. 碳纤维复合材料层压板的力学性能及缺陷分析. 硕士学位论文, 哈尔滨工业大学, 2009. 20 李平, 李逸, 张永建, 等. 塑料工业, 2019, 47(12), 45. 21 Yao J, Zhang T, Niu Y. Composite Structures , 2020, 248, 112550. 22 杨康, 赵为平, 赵立杰, 等. 材料导报, 2019(1), 223. 23 熊明洋. 湿热环境对碳纤维树脂基层合板的力学性能影响研究. 硕士学位论文, 浙江理工大学, 2016. 24 周乾飞, 冯奇, 侯进森, 等. 上海汽车, 2016(11), 48. 25 Behera A, Thawre M M, Ballal A.Materials Today: Proceedings , 2020, 28(2), 940. 26 Cunha J A P, Silva T C, Costa M L, et al. Engineering Failure Analysis , 2020, 120(21), 105051.
[1]
Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure [J]. Materials Reports, 2018, 32(3): 373
-377
.
[2]
Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors [J]. Materials Reports, 2018, 32(3): 378
-383
.
[3]
Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix [J]. Materials Reports, 2018, 32(3): 418
-426
.
[4]
Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field [J]. Materials Reports, 2018, 32(3): 427
-433
.
[5]
Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity [J]. Materials Reports, 2018, 32(3): 443
-452
.
[6]
Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys [J]. Materials Reports, 2018, 32(3): 461
-466
.
[7]
Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys [J]. Materials Reports, 2018, 32(1): 110
-115
.
[8]
Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems [J]. Materials Reports, 2018, 32(1): 122
-127
.
[9]
Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture [J]. Materials Reports, 2018, 32(1): 141
-148
.
[10]
Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying [J]. Materials Reports, 2018, 32(1): 93
-101
.
Viewed
Full text
Abstract
Cited
Shared
Discussed