Please wait a minute...
材料导报  2024, Vol. 38 Issue (10): 23020156-5    https://doi.org/10.11896/cldb.23020156
  高分子与聚合物基复合材料 |
热塑性聚氨酯耐油抗紫外老化性能改进研究
安绍都1,2, 邵伟光1, 樊桂琪1, 李万利1, 王建超1, 杨建雄1, 蔡利海1,*
1 中国人民解放军军事科学院系统工程研究院,北京 100071
2 中国建筑科学研究院有限公司,北京 100013
Study on Improvement of UV Aging Resistance of Thermoplastic Polyurethane After Oil Treatment
AN Shaodu1,2, SHAO Weiguang1, FAN Guiqi1, LI Wanli1, WANG Jianchao1, YANG Jianxiong1, CAI Lihai1,*
1 Institute of Systems Engineering, Academy of Military Sciences of the People’s Liberation Army, Beijing 100071, China
2 China Academy of Building Research Co., Ltd., Beijing 100013, China
下载:  全 文 ( PDF ) ( 9280KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 提高热塑性聚氨酯(TPU)胶层在油料抽提后的抗紫外老化性能对软质油料储、运设备的户外应用具有重要意义。本工作以无机抗紫外老化助剂金红石型纳米二氧化钛(TiO2)与高分子受阻胺光稳定剂622(HALS-622)为添加剂,与TPU共混后制备薄膜,经过油料抽提后进行300 h紫外老化。通过紫外-可见光谱、红外光谱定性与定量分析、力学性能与色差分析测试,结果表明,油料作用下,HALS-622会部分被抽提出并溶解,影响TPU的耐油抗紫外老化性能,TPU/TiO2样品在紫外老化后具有更小的色差变化与更稳定的力学性能。本研究细化了TPU在石油化工领域的应用探索,同时为TPU耐油抽提抗紫外老化性能的改进提供了实验依据。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
安绍都
邵伟光
樊桂琪
李万利
王建超
杨建雄
蔡利海
关键词:  热塑性聚氨酯  光稳定助剂  耐油性  抗紫外老化性    
Abstract: Improving the UV aging resistance of thermoplastic polyurethane elastomer (TPU) adhesive layer after oil extraction is of great significance for outdoor application of soft oil storage and transportation equipment. In this work, the inorganic anti UV aging additive rutile nano titanium dioxide (TiO2) and polymer hindered amine light stabilizer 622 (HALS-622) were used as additives to blend with TPU to prepare films. After oil extraction, the films were subjected to UV aging for 300 h. Through UV visible spectrum, qualitative and quantitative analysis of infrared spectrum, mechanical properties and color difference analysis and testing, the results show that HALS-622 would be partially extracted and dissolved under the action of oil, which affected the oil resistance and UV aging resistance of TPU. TPU/TiO2 samples have smaller color difference changes and more stable mechanical properties after UV aging. This study refined the application of TPU in petrochemical industry, and provided an experimental basis for the improvement of oil extraction and UV aging resistance of TPU.
Key words:  thermoplastic polyurethane    light stabilizer    oil resistance    UV aging resistance
出版日期:  2024-05-25      发布日期:  2024-05-28
ZTFLH:  TB304  
通讯作者:  *蔡利海,现为中国人民解放军军事科学院系统工程研究院高级工程师。目前主要从事能源装备材料研究。lihai96@163.com   
作者简介:  安绍都,2022年6月毕业于中国石油大学(北京),获得工学硕士学位。现为建研院检测中心有限公司工程师,主要从事化学建筑材料的检测与研究。
引用本文:    
安绍都, 邵伟光, 樊桂琪, 李万利, 王建超, 杨建雄, 蔡利海. 热塑性聚氨酯耐油抗紫外老化性能改进研究[J]. 材料导报, 2024, 38(10): 23020156-5.
AN Shaodu, SHAO Weiguang, FAN Guiqi, LI Wanli, WANG Jianchao, YANG Jianxiong, CAI Lihai. Study on Improvement of UV Aging Resistance of Thermoplastic Polyurethane After Oil Treatment. Materials Reports, 2024, 38(10): 23020156-5.
链接本文:  
http://www.mater-rep.com/CN/10.11896/cldb.23020156  或          http://www.mater-rep.com/CN/Y2024/V38/I10/23020156
1 Cai L H,Shao W G,Huang Z Y,et al.Plastics Science and Technology,2019,47(2),108 (in Chinese).
蔡利海,邵伟光,黄忠耀,等.塑料科技,2019,47(2),108.
2 Lu G,Shuai C G,Yang X,et al.Polymer Materials Science & Engineering,2020,36(11),117 (in Chinese).
陆刚,帅长庚,杨雪,等.高分子材料科学与工程,2020,36(11),117.
3 Zhang H,Xin C Z,Hong L.China Adhesives,2018,27(3),51 (in Chinese).
张浩,辛长征,洪亮.中国胶粘剂,2018,27(3),51.
4 Liu Y J.Handbook of raw materials and additives for polyurethanes,Che-mical Industry Press,China,2020,pp.390 (in Chinese).
刘益军.聚氨酯原料及助剂手册,化学工业出版社,2020,pp.390.
5 Lu Z X,Yu H J,Dong W.Plastics Science and Technology,2019,47(4),98 (in Chinese).
卢祉巡,于海佳,董薇.塑料科技,2019,47(4),98.
6 Fang L,Qiu T,Yang Q,et al.Composites Communications,2021,23,100591.
7 Xu W,Lv Y,Kong M,et al.Journal of Cleaner Production,2022,373,133942.
8 Mang Y,Li L,Chen L G.Fine Chemicals,2013,30(4),385 (in Chinese).
莽佑,李雷,陈立功.精细化工,2013,30(4),385.
9 Yang J,Muhammad Y,Yang C,et al.Construction and Building Mate-rials,2021,276,121461.
10 Cai L H,Qi Z G,Jun X U,et al.Chinese Chemical Letters,2017,28(5),949.
11 Boubakri A,Guermazi N,Elleuch K,et al.Materials Science and Enginee-ring,2010,527(7-8),1649.
12 Wei X Y,He Z B,Yuan S Q,et al.Polymers,2022,14(6),1091.
13 Zhang H J,Shao W G,Liu W Y,et al.Special Purpose Rubber Products,2019,40(2),72 (in Chinese).
张慧娟,邵伟光,刘文言,等.特种橡胶制品,2019,40(2),72.
14 Xia L P,Xu S X,Wang P,et al.Polyurethane Industry,2015,30(1),36 (in Chinese).
夏利平,许双喜,王鹏,等.聚氨酯工业,2015,30(1),36.
15 Pickett J E.Polymer Degradation & Stability,2011,96(12),2253.
16 Liu Y X,Wang Y S,Fan Z R,et al.Polymer Materials Science & Enginee-ring,2009,25(10),67 (in Chinese).
刘运学,王杨松,范兆荣,等.高分子材料科学与工程,2009,25(10),67.
17 Meng C C,Chen J,Zhang J Y,et al.China Synthetic Rubber Industry,2012(2),158 (in Chinese).
孟春财,陈建,张敬雨,等.合成橡胶工业,2012(2),158.
18 Rehman W U,Rasheed T,Naveed A,et al.Journal of Polymer Research,2022,29(5),188.
19 Yu F,Gao J,Liu C,et al.Progress in Organic Coatings,2020,141,105556.
20 Lyu Y N,Cao X J,Wu Y.Journal of Chongqing University of Technology(Natural Science),2022,36(8),229(in Chinese).
吕艳妮,曹雪娟,伍燕.重庆理工大学学报(自然科学),2022,36(8),229.
21 Jiang Z,Yuan K J,Li S F,et al.Spectroscopy and Spectral Analysis,2006(4),624 (in Chinese).
江治,袁开军,李疏芬,等.光谱学与光谱分析,2006(4),624.
22 Aguirresarobe R H,Irusta L,Fernandez-Berridi M J.Polymer Degradation and Stability,2012,97(9),1671.
23 Rosu D,Rosu L,Cascaval C N.Polymer Degradation and Stability,2009,94(4),591.
24 Mayer P,Lubecki M,Stosiak M,et al.International Journal of Adhesion and Adhesives,2022,117,103183.
25 Song Y K,Hong S H,Jang M,et al.Environmental Science & Technology,2017,51(8),4368.
26 Yang H,Zhang H,Cheng H,et al.Polymer Degradation and Stability,2018,155,95.
[1] 阎格, 张慧娟, 蔡利海, 邵伟光, 刘文言. 燃料油与紫外光共同作用下热塑性聚氨酯结构与性能演变规律[J]. 材料导报, 2024, 38(6): 22050216-6.
[2] 宋承哲, 张冠华, 屈丰来, 冯良勇. 热塑性聚氨酯改性环氧树脂的制备与微观特性表征[J]. 材料导报, 2023, 37(10): 21060009-7.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed