Review and Perspective on High Entropy Alloys Prepared by Additive Manufacturing
MA Minyu1, LIAN Yong1,2, ZHANG Jin1,2
1 Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China 2 Beijing Key Laboratory for Corrosion Erosion and Surface Technology, Beijing 100083, China
Abstract: Since the high entropy alloys were discovered in recent years, they have attracted enormous attention of researchers due to their unique design concept, microstructure and excellent performance. While the high price of high entropy alloys, the application of traditional manufacture cause the waste in prepartion, especially in the preparation of complex parts. Additive manufacturing is a novel technology that directly manufactures solid parts from three-dimensional data of parts, which can largely solve the preparation of high entropy alloys in complex parts. Moreover, the additive manufacturing technology has the characteristics of precise manufacturing and rapid solidification, which can ensure the uniformity of the alloy's structure than the traditional manufacture process, and is also more conducive to the refinement of the alloys' grains. However, the high entropy alloys and additive manufacturing are both new discipline and research on high entropy alloys via additive manufacturing is even on its infancy. This paper introduces the most commonly additive manufacturing technologies for high entropy alloys, focusing on the research on the microstructure evolution laws, mechanical properties, corrosion resistance, and high entropy alloy composite materials in additive manufactu-ring technology. Meanwhile, this paper summarizes the advantages and disadvantages of additive manufacturing high entropy alloys, and provides some references for the study of additive manufacturing technology in high entropy alloys.
马旻昱, 连勇, 张津. 增材制造技术制备高熵合金的研究现状及展望[J]. 材料导报, 2020, 34(17): 17082-17088.
MA Minyu, LIAN Yong, ZHANG Jin. Review and Perspective on High Entropy Alloys Prepared by Additive Manufacturing. Materials Reports, 2020, 34(17): 17082-17088.
1 Ye Y, Wang Q, Lu J, et al. Materials Today, 2016, 19(6), 349. 2 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299. 3 Ren M, Li B, Fu H. Transactions of Nonferrous Metals Society of China, 2013, 23(4), 991. 4 Zhang Y, Zhou Y J. Materials Science Forum, 2007, 561, 1337. 5 Lei Z, Liu X, Wu Y, et al. Nature, 2018, 563(7732), 546. 6 Yao M, Pradeep K G, Tasan C C, et al. Scripta Materialia, 2014, 72, 5. 7 He J, Wang H, Huang H, et al. Acta Materialia, 2016, 102, 187. 8 Rivera O, Allison P, Jordon J, et al. Materials Science and Engineering: A, 2017, 694, 1. 9 Mendoza M Y, Samimi P, Brice D A, et al. Metallurgical and Materials Transactions A, 2017, 48(7), 3594. 10 Bermingham M, Stjohn D, Krynen J, et al. Acta Materialia, 2019, 168, 261. 11 Jiang H, Tang H B, Fang Y L, et al. Chinese Journal of Lasers, 2011, 39(2), 78 (in Chinese). 姜华, 汤海波, 方艳丽, 等.中国激光, 2011, 39(2), 78. 12 Zhao Z G, Bo L, Li L, et al. Aeronautical Manufacturing Technology, 2014, 463(19), 46 (in Chinese). 赵志国, 柏林, 李黎, 等.航空制造技术, 2014, 463(19), 46. 13 Yang X W, Yang Y Q, Liu Y, et al. Chinese Journal of Lasers, 2015, 42(3), 62 (in Chinese). 杨雄文, 杨永强, 刘洋, 等.中国激光, 2015, 42(3), 62. 14 Chang F, Miao X G, Xia J Q. Robot Technique and Application, 2019(3), 40 (in Chinese). 常峰, 苗新刚, 夏建强.机器人技术与应用, 2019(3), 40. 15 Zhou P F, Xiao D H, Wu Z, et al. Materials Science and Engineering: A, 2019, 739, 86. 16 Wu W, Zhou R, Wei B, et al. Materials Characterization, 2018, 144, 605. 17 Brif Y, Thomas M, Todd I. Scripta Materialia, 2015, 99, 93. 18 Zhang C, Zhang H, Wu C, et al. Vacuum, 2017, 141, 181. 19 He R J, Wang H M. Journal of Aeronautical Materials, 2009, 29(6), 18 (in Chinese). 贺瑞军, 王华明.航空材料学报, 2009, 29(6), 18. 20 Liu Q, Wang Y, Zheng H, et al. Optics & Laser Technology, 2016, 82, 1. 21 Qi H, Azer M, Singh P. The International Journal of Advanced Manufacturing Technology, 2010, 48(1-4), 121. 22 Zhu X F, Zhong M L, Liu W J, et al. Chinese Journal of Lasers, 2007, 34(1), 185 (in Chinese). 朱晓峰, 钟敏霖, 刘文今, 等.中国激光, 2007, 34(1), 185. 23 Petrat T, Graf B, Gumenyuk A, et al. Physics Procedia, 2016, 83, 761. 24 Joseph J, Jarvis T, Wu X, et al. Materials Science and Engineering: A, 2015, 633, 184. 25 Yan W, Ge W, Qian Y, et al. Acta Materialia, 2017, 134, 324. 26 Guo C, Lin F, Ge W J. Journal of Mechanical Engineering, 2014, 50(21), 152 (in Chinese). 郭超, 林峰, 葛文君.机械工程学报, 2014, 50(21), 152. 27 Yang X, Xi Z P, Liu Y, et al. Rare Metal Materials and Engineering, 2009, 38(7), 1272 (in Chinese). 杨鑫, 奚正平, 刘咏, 等.稀有金属材料与工程, 2009, 38(7), 1272. 28 Fujieda T, Shiratori H, Kuwabara K, et al. Materials Letters, 2015, 159, 12. 29 Fan Q, Li B, Zhang Y. Journal of Alloys and Compounds, 2014, 614, 203. 30 Li B, Wang Y, Ren M, et al. Materials Science and Engineering: A, 2008, 498(1-2), 482. 31 Jiang S Y, Lin Z F, Sun Y X. Rare Metal Materials and Engineering, 2018, 47(10), 277 (in Chinese). 蒋淑英, 林志峰, 孙永兴.稀有金属材料与工程, 2018, 47(10), 277. 32 Kunce I, Polanski M, Bystrzycki J. International Journal of Hydrogen Energy, 2013, 38(27), 12180. 33 Tong Z, Ren X, Jiao J, et al. Journal of Alloys and Compounds, 2019, 785, 1144. 34 Xiang S, Luan H, Wu J, et al. Journal of Alloys and Compounds, 2019, 773, 387. 35 Niu P D, Li R D, Yuan T C, et al. Intermetallics, 2019, 104, 24. 36 Xiang S, Zhang L, Liu X, et al. Transactions of Materials and Heat Treatment, 2018, 39(10), 29 (in Chinese). 向硕, 张雷, 刘学, 等.材料热处理学报, 2018, 39(10), 29. 37 Guan S, Wan D, Solberg K, et al. Materials Science and Engineering: A, 2019, 761, 138056. 38 Xiang S, Luan H, Wu J, et al. Journal of Alloys and Compounds, 2019, 773, 387. 39 Chew Y, Bi G J, Zhu Z G, et al. Materials Science and Engineering: A, 2019, 744, 137. 40 Li Q Y, Li D C, Zhang H, et al. Aeronautical Manufacturing Technology, 2018, 61(10), 61(In Chinese). 李青宇, 李涤尘, 张航, 等.航空制造技术, 2018, 61(10), 61. 41 Li Q Y, Zhang H, Li D C, et al. Journal of Mechanical Engineering, 2019, 55(15), 10 (In Chinese). 李青宇, 张航, 李涤尘, 等.机械工程学报, 2019, 55(15), 10. 42 Li R, Niu P, Yuan T, et al. Journal of Alloys and Compounds, 2018, 746, 125. 43 Yao H, Tan Z, He D, et al. Journal of Alloys and Compounds, 2020, 813, 152196. 44 Fujieda T, Shiratori H, Kuwabara K, et al. Materials Letters, 2017, 189, 148. 45 Yang X, Zhou Y, Xi S, et al. Materials Science and Engineering: A, 2019, 767, 138394. 46 Shiratori H, Fujieda T, Yamanaka K, et al. Materials Science and Engineering: A, 2016, 656, 39. 47 Zhou K, Li J, Wang L, et al. Intermetallics, 2019, 114, 106592. 48 Agrawal P, Thapliyal S, Nene S S, et al. Additive Manufacturing, 2020, 32, 101098. 49 Luo H, Li Z, Mingers A M, et al. Corrosion Science, 2018, 134, 131. 50 Nair R B, Arora H S, Mukherjee S, et al. Ultrasonics Sonochemistry, 2018, 41, 252. 51 Nene S S, Frank M, Liu K, et al. Scripta Materialia, 2019, 166, 168. 52 Kuwabara K, Shiratori H, Fujieda T, et al. Additive Manufacturing, 2018, 23, 264. 53 Fujieda T, Chen M, Shiratori H, et al. Additive Manufacturing, 2019, 25, 412. 54 Melia M A, Carroll J D, Whetten S R, et al. Additive Manufacturing, 2019, 29, 100833. 55 Amar A, Li J, Xiang S, et al. Intermetallics, 2019, 109, 162. 56 Li B, Qian B, Xu Y, et al. Materials Letters, 2019, 252, 88. 57 Li B, Zhang L, Xu Y, et al. Powder Technology, 2020, 360, 509. 58 Li J, Xiang S, Luan H, et al. Journal of Materials Science & Technology, 2019, 35(11), 2430. 59 Savinov R, Yachao W, Jing S. Journal of Manufactyring Process, DOI:10.1016/j.jmapro. 2020.04.018. 60 Li B, Zhang L, Yang B. Composites Communications, 2020, 19, 56.