Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (3): 405-411    https://doi.org/10.11896/j.issn.1005-023X.2018.03.010
     材料综述 ｜ |
木质素基碳纤维制备的研究进展
刘兰燕1,宋俊1,程博闻1,薛文池1,郑云波2
1 天津工业大学材料科学与工程学院,天津 300387
2 中国纺织科学研究院海西分院,晋江 362200
Research Progress in Preparation of Lignin-based Carbon Fiber
Lanyan LIU1,Jun SONG1,Bowen CHENG1,Wenchi XUE1,Yunbo ZHENG2
1 School of Material Science and Engineering, Tianjin Polytechnic University, Tianjin 300387
2 Haixi Branch of China Textile Academy, Jinjiang 362200
下载:  全 文 ( PDF ) ( 1402KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 

木质素在自然界中储量丰富,并且可再生、碳含量高,将其应用于碳纤维的制备有着无可比拟的成本优势。简要介绍了木质素基碳纤维的发展进程,详述了硫酸盐木质素、有机溶剂型木质素和蒸汽爆破木质素的来源、结构差异及其碳纤维制备工艺过程进展,通过对比得出硫酸盐木质素是制备低成本碳纤维的最佳木质素原料,同时指出了木质素制备碳纤维的未来研究方向,旨在为木质素制备碳纤维的研究者提供参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘兰燕
宋俊
程博闻
薛文池
郑云波
关键词:  硫酸盐木质素  有机溶剂型木质素  碳纤维  制备方法  结构与性能    
Abstract: 

Lignin is rich in nature, it is also renewable and with high carbon content. The application of lignin in the preparation of carbon fiber has an unparalleled cost advantage.The development of lignin-based carbon fiber is briefly introduced. The progress of the source, structure difference and carbon fiber preparation methods of kraft lignin, organosolv lignin and steam-explosion lignin is discussed in detail. As a result, the kraft lignin has been chosen as the best raw material for the preparation of low cost carbon fiber. Furthermore, the future direction of lignin-based carbon fiber is pointed out, which aims to provide reference for the initial research of lignin-based carbon fiber.
Key words:  kraft lignin    organosolv lignin    carbon fiber    preparation methods    structure and properties
出版日期:  2018-02-10      发布日期:  2018-02-10
ZTFLH:  TB34  
作者简介:  刘兰燕:女,1989年生,硕士研究生,主要从事木质素及碳纤维的制备研究 E-mail: lanyan_oni@163.com|宋俊:通信作者,男,副教授,主要从事生物材料制备纤维的研究 E-mail: sjhb2000@163.com|程博闻:通信作者,男,教授,主要从事环境友好型纤维素及木质素纤维的研究 E-mail: bowen15@tjpu.edu.cn
引用本文:    
刘兰燕,宋俊,程博闻,薛文池,郑云波. 木质素基碳纤维制备的研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 405-411.
Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber. Materials Reports, 2018, 32(3): 405-411.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.03.010  或          https://www.mater-rep.com/CN/Y2018/V32/I3/405
图1  PAN制备碳纤维成本分布[3](电子版为彩图)
图2  木质素基本结构单元
图3  干法纺丝得到的木质素基碳纤维SEM图[36]
图4  (a)同轴静电纺丝喷头和(b)三维静电纺丝喷头[51]
1 Frank E, Hermanutz F, Buchmeiser M R . Carbon fibers: Precursors, manufacturing, and properties[J]. Macromolecular Materials & Engineering, 2012,297(6):493.
2 Wei H Q, Zhang L M . Research status of lignin-based low-cost carbon fibers[J]. Synthetic Fiber in China, 2016,45(1):32(in Chinese).
2 魏慧卿, 张黎明 . 木质素基低成本碳纤维的研究现状[J]. 合成纤维, 2016,45(1):32.
3 Baker D A, Rials T G . Recent advances in low-cost carbon fiber manufacture from lignin[J]. Journal of Applied Polymer Science, 2013,130(2):713.
4 Wang H Y . Development foreground and market analyse of carbon fiber[J]. Hi-Tech Fiber & Application, 2007,32(4):23(in Chinese).
4 王海英 . 碳纤维的发展前景与市场分析[J]. 高科技纤维与应用, 2007,32(4):23.
5 Qiu W H, Chen H Z . Structure, function and high value utilization of lignin[J]. Journal of Cellulose Science and Technology, 2006,14(1):52(in Chinese).
5 邱卫华, 陈洪章 . 木质素的结构、功能及高值化利用[J]. 纤维素科学与技术, 2006,14(1):52.
6 Norgren M, Edlund H . Lignin: Recent advances and emerging applications[J]. Current Opinion in Colloid & Interface Science, 2014,19(5):409.
7 Ten E, Vermerris W . Recent developments in polymers derived from industrial lignin[J]. Journal of Applied Polymer Science, 2015,132(24):42069.
8 Naseem A, Tabasum S, Zia K M , et al. Lignin-derivatives based polymers, blends and composites: A review[J]. International Journal of Biological Macromolecules, 2016,93(A):296.
9 Otani S, Fukuoka Y, Igarashi B , et al. Method for producing carbonized lignin fiber: US, 3461082 A[P]. 1969.
10 Fukuoka Y . Carbon fiber made from lignin (kayacarbon)[J]. Japan Chemical Quartly, 1969,5(3):63.
11 Cha L S . Development of the preparation of lignin-based carbon fiber[J].Carbon, 1992(4):44(in Chinese).
11 查刘生 . 木质素基碳纤维的研制情况[J].炭素, 1992(4):44.
12 Wang X, Jiang S N, Chen M Z , et al. Review of research progress on lignin-based carbon fibers[J]. Journal of Forestry Engineering, 2016,1(1):83(in Chinese).
12 王翔, 蒋帅南, 陈敏智 , 等. 木质素基碳纤维研究进展[J]. 林业科技开发, 2016,1(1):83.
13 Da G, Liu P T . Lignin based carbon fiber[J]. Synthetic Fiber in China, 2012,41(3):43(in Chinese).
13 大谷朝男, 刘辅庭 . 木质素基碳纤维[J]. 合成纤维, 2012,41(3):43.
14 Zhang J H . Preparation, configuration and properties characterization of carbon fiber from liquefied bamboo[D]. Beijing:Beijing Forestry University, 2011(in Chinese).
14 张建辉 . 竹材液化物碳纤维的制备、结构与性能表征[D]. 北京:北京林业大学, 2011.
15 Tang W F . Study on the general carbon fiber preparation of liquefied lignin[D]. Beijing:Beijing University of Chemical Technology, 2012(in Chinese).
15 唐文峰 . 木质素液化物制备通用级碳纤维的工艺研究[D]. 北京:北京化工大学, 2012.
16 Dong L B . The research of production process of lignin based carbon fiber and influence of lignin structure[D]. Jinan:Qilu University of Technology, 2013(in Chinese).
16 董立斌 . 木素基碳纤维制备工艺及木素结构对其影响的研究[D]. 济南:齐鲁工业大学, 2013.
17 Zhang T . Preparation and properties research of lignin-phenol-for-maldehyde based macroporous activated carbon fiber[D]. Shanghai:Donghua University, 2009(in Chinese).
17 张涛 . 木质素酚醛树脂大孔活性碳纤维的制备与表征[D]. 上海:东华大学, 2009.
18 Jin Y C, Li Z Z . Structure Characteristics of dissolved lignin from Na2S pretreatment kraft pulping[J]. Journal of Nanjing Forestry University:Natural Sciences Edition, 2000,24(6):17(in Chinese).
18 金永灿, 李忠正 . 预处理硫酸盐制浆溶出木质素的结构特性[J]. 南京林业大学学报:自然科学版, 2000,24(6):17.
19 Jin Y C, Li Z Z . The changes of characteristics of dissolved lignin from kraft cooking[J]. Journal of Cellulose Science and Technology, 2001,9(1):28(in Chinese).
19 金永灿, 李忠正 . 硫酸盐蒸煮过程中溶出木质素特性的变化[J]. 纤维素科学与技术, 2001,9(1):28.
20 Kadla J F, Kubo S, Venditti R A , et al. Lignin-based carbon fibers for composite fiber applications[J]. Carbon, 2002,40(15):2913.
21 Kadla J F, Kubo S . Miscibility and hydrogen bonding in blends of poly(ethylene oxide) and kraft lignin[J]. Macromolecules, 2003,36(20):7803.
22 Kubo S, Kadla J F . Lignin-based carbon fibers: Effect of synthetic polymer blending on fiber properties[J]. Journal of Polymers & the Environment, 2005,13(2):97.
23 Seydibeyo?lu M ? . A novel partially bio-based PAN-lignin blend as a potential carbon fiber precursor[J]. Journal of Biomedicine & Biotechnology, 2012,2012(4):598324.
24 Wang S, Li Y, Xiang H , et al. Low cost carbon fibers from bio-renewable lignin/poly(lactic acid) (PLA) blends[J]. Composites Science & Technology, 2015,119:20.
25 Thunga M, Chen K, Grewell D , et al. Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers[J]. Carbon, 2014,68(2):159.
26 Glasser W G, Sarkanen S . Lignin: Properties and materials[M]. Washington:American Chemical Society, 1989: 35.
27 Kubo S, Kadla J F . Kraft lignin/poly(ethylene oxide) blends: Effect of lignin structure on miscibility and hydrogen bonding[J]. Journal of Applied Polymer Science, 2005,98(3):1437.
28 Norberg I . Carbon fibres from kraft lignin[D]. Stockholm:KTH Royal Institute of Technology, 2012.
29 Nordstr?m Y . Development of softwood kraft lignin based carbon fibers[D]. Lulea:Lulea University of Technology, 2012.
30 ?hman F . Precipitation and separation of lignin from kraft black liquor[D]. Goteborg:Chalmers University of Technology, 2006.
31 Brodin I, Sj?holm E, Gellerstedt G . Kraft lignin as feedstock for chemical products: The effects of membrane filtration[J]. Holzforschung, 2010,63(3):290.
32 Nordstr?m Y, Norberg I, Sj?holm E , et al. A new softening agent for melt spinning of softwood kraft lignin[J]. Journal of Applied Polymer Science, 2013,129(3):1274.
33 Norberg I, Nordstr?m Y, Drougge R , et al. A new method for stabilizing softwood kraft lignin fibers for carbon fiber production[J]. Journal of Applied Polymer Science, 2013,128(6):3824.
34 Sun Q, Khunsupat R, Akato K , et al. A study of poplar organosolv lignin after melt rheology treatment as carbon fiber precursors[J]. Green Chemistry, 2016,18(18):5015.
35 Zhang M, Ogale A . Carbon fibers from dry-spinning of acetylated softwood kraft lignin[J]. Carbon, 2014,69(4):626.
36 Zhang M, Jin J, Ogale A A . Carbon fibers from UV-assisted stabilization of lignin-based precursors[J]. Fibers, 2015,3(2):184.
37 Zhang M, Ogale A A . Effect of temperature and concentration of acetylated-lignin solutions on dry-spinning of carbon fiber precursors[J]. Journal of Applied Polymer Science, 2016,133(45):43663.
38 Park C W, Youe W J, Han S Y , et al. Solubility of kraft lignin-g-polyacrylonitrile copolymer in various ionic liquids and characterization of its solution[J]. Wood Science & Technology, 2017,51(1):151.
39 Dallmeyer I, Kadla J F . Electrospinning of technical lignins for the production of fibrous networks[J]. Journal of Wood Chemistry & Technology, 2010,30(4):315.
40 Ma X, Kolla P, Zhao Y , et al. Electrospun lignin-derived carbon nanofiber mats surface-decorated with MnO2, nanowhiskers as binder-free supercapacitor electrodes with high performance[J]. Journal of Power Sources, 2016,325:541.
41 Svinterikos E, Zuburtikudis I . Carbon nanofibers from renewable bioresources (lignin) and a recycled commodity polymer [poly(ethylene terephthalate)][J]. Journal of Applied Polymer Science, 2016,133(37):43936.
42 Youe W J, Lee S M, Lee S S , et al. Characterization of carbon nanofiber mats produced from electrospun lignin-g-polyacrylonitrile copolymer[J]. International Journal of Biological Macromolecules, 2016,82(3):497.
43 Lao J B . Organic solvent pulping of poplar[J]. Heilongjiang Pulp & Paper, 2003,31(1):23(in Chinese).
43 劳嘉葆 . 杨木的有机溶剂制浆[J]. 黑龙江造纸, 2003,31(1):23.
44 Kubo S, Uraki Y, Sano Y , et al. Thermomechanical analysis of isolated lignins[J]. Holzforschung, 1996,50(50):144.
45 Kubo S, Uraki Y, Sano Y . Preparation of carbon fibers from softwood lignin by atmospheric acetic acid pulping[J]. Carbon, 1998,36(7-8):1119.
46 Uraki Y, Kubo S, Nigo N , et al. Preparation of carbon fibers from organosolv lignin obtained by aqueous acetic acid pulping[J]. Holzforschung, 1995,49(4):343.
47 Foston M, Nunnery G A, Meng X , et al. NMR a critical tool to study the production of carbon fiber from lignin[J]. Carbon, 2013,52(2):65.
48 Lin J, Kubo S, Yamada T , et al. Chemical thermostabilization for the preparation of carbon fibers from softwood lignin[J]. Bioresour-ces, 2012,7(4):5634.
49 Lin J, Koda K, Kubo S , et al. Improvement of mechanical properties of softwood lignin-based carbon fibers[J]. Journal of Wood Chemistry & Technology, 2014,34(34):111.
50 Feng Y , Aorigele. Preparation of lignin-based nanofibers by electrospinning[J]. Paper Science & Technology, 2009,28(5):29(in Chinese).
50 冯玉, 敖日格勒 . 静电纺丝法制备木质素基纳米纤维[J]. 造纸科学与技术, 2009,28(5):29.
51 Lallave M, Bedia J, Ruiz-Rosas R , et al. Filled and hollow carbon nanofibers by coaxial electrospinning of Alcell lignin without binder polymers[J]. Advanced Materials, 2007,19(23):4292.
52 Ruiz-Rosas R, Bedia J, Lallave M , et al. The production of submicron diameter carbon fibers by the electrospinning of lignin[J]. Carbon, 2009,48(3):696.
53 Ding R, Wu H, Thunga M , et al. Processing and characterization of low-cost electrospun carbon fibers from organosolv lignin/polyacrylonitrile blends[J]. Carbon, 2016,100:126.
54 Lou P, Liu Z . Steam explosion of biomass as a pretreatment for conversion to ethanol[J]. Forestry Science & Technology, 2005,30(3):53(in Chinese).
54 罗鹏, 刘忠 . 蒸汽爆破法预处理木质纤维原料的研究[J]. 林业科技, 2005,30(3):53.
55 Lin J, Zhao G J . Review of research progress on lignin-based carbon fibers[J]. Journal of Beijing Forestry University, 2010,32(4):293.
55 林剑, 赵广杰 . 木质素基碳纤维的研究进展[J]. 北京林业大学学报, 2010,32(4):293.
56 Sudo K, Shimizu K . New carbon fiber from lignin[J]. Journal of Applied Polymer Science, 1992,44(1):127.
57 Sudo K, Shimizu K, Nakashima N , et al. A new modification me-thod of exploded lignin for the preparation of a carbon fiber precursor[J]. Journal of Applied Polymer Science, 1993,48(8):1485.
58 Chatterjee S, Saito T . Lignin derived advanced carbon materials[J]. Chemsuschem, 2015,8(23):3941.
59 Feng Y, Lan J, Ma P , et al. Chemical structure and thermal properties of lignin modified with polyethylene glycol during steam explosion[J]. Wood Science & Technology, 2017,51(1):135.
60 Zhang F, Lin J, Zhao G . Preparation and characterization of modified soda lignin with polyethylene glycol[J]. 2016,9(10):822.
61 Dong X, Lu C, Zhou P , et al. Polyacrylonitrile/lignin sulfonate blend fiber for low-cost carbon fiber[J]. RSC Advances, 2015,5(53):42259.
62 Sallem-Idrissi N, Sclavons M, Debecker D P , et al. Miscible raw lignin/nylon 6 blends: Thermal and mechanical performances[J]. Journal of Applied Polymer Science, 2016,133(6):42963.
63 Miao C, Hamad W Y . Controlling lignin particle size for polymer blend applications[J]. Journal of Applied Polymer Science, 2016,134(14):44669.
64 You X, Duan J, Koda K , et al. Preparation of electric double layer capacitors (EDLCs) from two types of electrospun lignin fibers[J]. Holzforschung, 2015,70(7):661.
65 Salmén L, Bergnor E, Olsson A M , et al. Extrusion of softwood kraft lignins as precursors for carbon fibres[J]. Bioresources, 2015,10(4):7544.
66 Imel A, Naskar A K, Dadmun M . Understanding the impact of polyethylene oxide on the assembly of lignin in solution towards improved carbon fiber production[J]. ACS Applied Materials & Interfaces, 2016,8(5):3200.
67 Wang S, Zhou Z, Xiang H , et al. Reinforcement of lignin-based carbon fibers with functionalized carbon nanotubes[J]. Composites Science & Technology, 2016,128:116.
[1] 王艳, 高腾翔, 张少辉, 李文俊, 牛荻涛. 不同形态回收碳纤维水泥基材料的力学与导电性能[J]. 材料导报, 2024, 38(9): 23010043-9.
[2] 李再久, 夏臣平, 刘明诏, 金青林. 骨组织工程镁基支架的制备研究进展[J]. 材料导报, 2024, 38(4): 22050324-11.
[3] 王金涛, 段体岗, 郭建章, 马力, 余聚鑫, 张海兵. 三维碳纤维基复合材料及其在海水溶解氧电池中的应用性能[J]. 材料导报, 2024, 38(4): 22040345-6.
[4] 陈历, 朱孙科, 董绍江, 肖勇, 宋霞. 湿热环境对碳纤维复合材料防撞梁低速碰撞损伤的影响[J]. 材料导报, 2024, 38(23): 23090157-7.
[5] 潘宇, 况帆, 路新. 非连续增强钛基复合材料的研究现状及应用进展[J]. 材料导报, 2024, 38(21): 23080104-10.
[6] 孙国栋, 康凯, 解静, 贾研, 郑斌, 吕龙飞, 田清来, 唐宇星. Ti3SiC2陶瓷材料制备方法研究进展[J]. 材料导报, 2024, 38(18): 23020262-11.
[7] 莫琛, 向阳, 陈坤, 张稳, 彭志航, 文瑾, 曹建辉. Al2O3f/Al2O3陶瓷基复合材料研究进展[J]. 材料导报, 2024, 38(18): 23030126-9.
[8] 高瑞泽, 王亚强, 张金钰, 杨红艳, 刘刚, 孙军. 梯度结构金属材料的制备方法和力学性能研究进展[J]. 材料导报, 2024, 38(15): 23040269-12.
[9] 朱昊, 李勇, 还大军. 短切CF/PEEK复合材料的制备及抗紫外老化性能[J]. 材料导报, 2024, 38(14): 23020237-6.
[10] 穆锐, 刘元雪, 欧忠文, 胡志德, 姚未来, 成鑫磊, 雷屹欣, 杨秀明. 气凝胶复合材料的制备及保温隔热应用进展[J]. 材料导报, 2024, 38(14): 22110298-14.
[11] 杨强, 刘洪新, 何端鹏, 陈海峰, 陈维强, 金晶, 潘福明. 高导热沥青基碳纤维复合材料在航天器中的应用现状及展望[J]. 材料导报, 2024, 38(1): 22080244-8.
[12] 贾峰峰, 俄松峰, 陈珊珊, 宁逗逗, 黄吉振, 陆赵情. 碳纤维湿法造纸工艺及碳纤维纸基功能材料的研究进展[J]. 材料导报, 2023, 37(8): 21070135-9.
[13] 王兰喜, 何延春, 王虎, 吴春华, 李林. 石墨烯导热纸研究进展[J]. 材料导报, 2023, 37(3): 20110183-9.
[14] 潘星辰, 郜红合, 陈旭辉, 朱子兴. 乘用车座椅材料加工工艺与结构设计[J]. 材料导报, 2023, 37(22): 22090290-7.
[15] 张星星, 高相东, 董余兵, 段灯, 李效民. SiO2气凝胶@聚合物复合材料的制备方法及性能研究进展[J]. 材料导报, 2023, 37(21): 22040191-11.
[1] Yanzhen WANG, Mingming CHEN, Chengyang WANG. Preparation and Electrochemical Properties Characterization of High-rate SiO2/C Composite Materials[J]. Materials Reports, 2018, 32(3): 357 -361 .
[2] Yimeng XIA, Shuai WU, Feng TAN, Wei LI, Qingmao WEI, Chungang MIN, Xikun YANG. Effect of Anionic Groups of Cobalt Salt on the Electrocatalytic Activity of Co-N-C Catalysts[J]. Materials Reports, 2018, 32(3): 362 -367 .
[3] Qingshun GUAN,Jian LI,Ruyuan SONG,Zhaoyang XU,Weibing WU,Yi JING,Hongqi DAI,Guigan FANG. A Survey on Preparation and Application of Aerogels Based on Nanomaterials[J]. Materials Reports, 2018, 32(3): 384 -390 .
[4] Lijing YANG,Zhengxian LI,Chunliang HUANG,Pei WANG,Jianhua YAO. Producing Hard Material Coatings by Laser-assisted Cold Spray:a Technological Review[J]. Materials Reports, 2018, 32(3): 412 -417 .
[5] Zhiqiang QIAN,Zhijian WU,Shidong WANG,Huifang ZHANG,Haining LIU,Xiushen YE,Quan LI. Research Progress in Preparation of Superhydrophobic Coatings on Magnesium Alloys and Its Application[J]. Materials Reports, 2018, 32(1): 102 -109 .
[6] Wen XI,Zheng CHEN,Shi HU. Research Progress of Deformation Induced Localized Solid-state Amorphization in Nanocrystalline Materials[J]. Materials Reports, 2018, 32(1): 116 -121 .
[7] Xing LIANG, Guohua GAO, Guangming WU. Research Development of Vanadium Oxide Serving as Cathode Materials for Lithium Ion Batteries[J]. Materials Reports, 2018, 32(1): 12 -33 .
[8] Hao ZHANG,Yongde HUANG,Yue GUO,Qingsong LU. Technological and Process Advances in Robotic Friction Stir Welding[J]. Materials Reports, 2018, 32(1): 128 -134 .
[9] Laima LUO, Mengyao XU, Xiang ZAN, Xiaoyong ZHU, Ping LI, Jigui CHENG, Yucheng WU. Progress in Irradiation Damage of Tungsten and Tungsten AlloysUnder Different Irradiation Particles[J]. Materials Reports, 2018, 32(1): 41 -46 .
[10] Fengsen MA,Yan YU,Jie ZHANG,Haibo CHEN. A State-of-the-art Review of Cytotoxicity Evaluation of Biomaterials[J]. Materials Reports, 2018, 32(1): 76 -85 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed